Continuous-Flow Suzuki-Miyaura Coupling in Water and Organic Solvents Promoted by Blends of Stabilized Convoluted Polymeric Palladium Catalysts and Polymeric Auxiliary Materials.

Given that heterogeneous palladium-catalyzed C-C bond formation reactions under continuous-flow conditions are well suited for the efficient and safe production of pharmaceuticals and functional materials, the development of active and durable catalysts for this purpose is a matter of high practical significance. Here, a previously established molecular convolution methodology was used to synthesize catalysts for Suzuki-Miyaura coupling under flow conditions by blending convoluted polymeric palladium catalysts (prepared from copolymers of 4-vinylpyridine and 4-tert-butylstyrene) and crosslinked polymeric auxiliary materials (prepared from copolymers of divinylbenzene and 4-tert-butylstyrene). The optimal catalyst exhibited high performance and durability and allowed numerous biaryl products such as liquid-crystalline materials, organic electroluminescent materials, and pharmaceuticals to be continuously synthesized with turnover frequencies of up to 238 h-1 . In a demonstration of practical utility, the developed catalytic system was used for the continuous synthesis of two pharmaceuticals (felbinac and fenbufen) in water as the sole solvent.

CO2 reduction driven by a pH gradient.

All life on Earth is built of organic molecules, so the primordial sources of reduced carbon remain a major open question in studies of the origin of life. A variant of the alkaline-hydrothermal-vent theory for life's emergence suggests that organics could have been produced by the reduction of CO2 via H2 oxidation, facilitated by geologically sustained pH gradients. The process would be an abiotic analog-and proposed evolutionary predecessor-of the Wood-Ljungdahl acetyl-CoA pathway of modern archaea and bacteria. The first energetic bottleneck of the pathway involves the endergonic reduction of CO2 with H2 to formate (HCOO-), which has proven elusive in mild abiotic settings. Here we show the reduction of CO2 with H2 at room temperature under moderate pressures (1.5 bar), driven by microfluidic pH gradients across inorganic Fe(Ni)S precipitates. Isotopic labeling with 13C confirmed formate production. Separately, deuterium (2H) labeling indicated that electron transfer to CO2 does not occur via direct hydrogenation with H2 but instead, freshly deposited Fe(Ni)S precipitates appear to facilitate electron transfer in an electrochemical-cell mechanism with two distinct half-reactions. Decreasing the pH gradient significantly, removing H2, or eliminating the precipitate yielded no detectable product. Our work demonstrates the feasibility of spatially separated yet electrically coupled geochemical reactions as drivers of otherwise endergonic processes. Beyond corroborating the ability of early-Earth alkaline hydrothermal systems to couple carbon reduction to hydrogen oxidation through biologically relevant mechanisms, these results may also be of significance for industrial and environmental applications, where other redox reactions could be facilitated using similarly mild approaches.

CD38 expression is an important prognostic marker in diffuse large B-cell lymphoma.

Diffuse large B-cell lymphoma (DLBCL) is a heterogeneous group of diseases with variable outcomes. Although several prognostic markers have been developed, specific biomarkers for stratifying treatment strategies have not been fully investigated. This study aimed to analyze the clinical impact of the expression of cluster of differentiation (CD) 38, which is associated with cellular proliferation and disease progression, in patients with de-novo DLBCL. Using flow cytometry analysis, 137 cases with DLBCL were investigated for surface expression of CD38. Based on the cut-off value by the survival classification and regression tree analysis, the patients were categorized into a CD38HIGH group (n = 37) and CD38LOW group (n = 100). The 4-years progression-free survival (PFS) was 31.6% in the CD38HIGH group and 60.7% in the CD38LOW group (p < 0.001). Multivariate analysis showed the CD38HIGH group to be associated with significantly worse PFS (adjusted hazard ratio [aHR], 2.15, 95% CI: 1.26-3.68, p = 0.005) and poor overall survival (OS) (aHR, 2.54, 95% CI: 1.25-5.19, p = 0.010) than the CD38LOW group. In conclusion, we demonstrated that high CD38 expression is an independent adverse prognostic factor associated with poor clinical outcomes compared to low CD38 expression. CD38 expression in DLBCL cells might be useful for predicting outcomes and designing risk-adapted therapies for patients with de-novo DLBCL.

Instantaneous Click Chemistry by a Copper-Containing Polymeric-Membrane-Installed Microflow Catalytic Reactor.

The copper(I)-catalyzed Huisgen cycloaddition (azide-alkyne cycloaddition) is an important reaction in click chemistry that ideally proceeds instantaneously. An instantaneous Huisgen cycloaddition has been developed that uses a novel catalytic dinuclear copper complex-containing polymeric membrane-installed microflow device. A polymeric membranous copper catalyst was prepared from poly(4-vinylpyridine), copper(II) sulfate, sodium chloride, and sodium ascorbate at the interface of two laminar flows inside microchannels. Elucidation of the structure by XANES, EXAFS, and elemental analysis, as well as second-order Møller-Plesset perturbation theory (MP2) calculations and density functional theory (DFT) calculations assigned the local structure near Cu as a µ-chloro dinuclear Cu(I) complex. The microflow device promotes the instantaneous click reaction of a variety of alkynes and organic azides to afford the corresponding triazoles in quantitative yield.

Oxygen transfer reaction of haloalkyl amides catalyzed by phenylboronic acid.

Nitrile derivatives are important building blocks in organic synthesis. Herein, we report the serendipitous discovery of an oxygen transfer reaction that produces hydroxyalkyl nitriles from the sequential dehydration and hydrolysis of haloalkyl amides. Product yields of up to 91% were achieved, and the phenylboronic acid was recovered as triphenylboroxine. The triphenylboroxine was reused as a catalyst without any loss of catalytic activity. A probable catalytic pathway was proposed based on control experiments and DFT calculations.

Polymer-Supported-Cobalt-Catalyzed Regioselective Cyclotrimerization of Aryl Alkynes.

A convoluted poly(4-vinylpyridine) cobalt(II) (P4VP-CoCl2) system was developed as a stable and reusable heterogeneous catalyst. The local structure near the Co atom was determined on the basis of experimental data and theoretical calculations. This immobilized cobalt catalyst showed high selectivity and catalytic activity in the [2 + 2 + 2] cyclotrimerization of terminal aryl alkynes. With 0.033 mol % P4VP-CoCl2, the regioselective formation of 1,3,5-triarylbenzene was realized without 1,2,4-triarylbenzene formation. Further, a multigram-scale (11 g) reaction proceeded efficiently. In addition, the polymer-supported catalyst was successfully recovered and used three times. X-ray photoelectron spectroscopy analysis of the recovered catalyst suggested that cobalt was in the +2 oxidation state. The 1,3,5-triarylbenzene derivatives were applied to the synthesis of a molecular beam electron resist and a polycyclic aromatic hydrocarbon.

Microfluidic Reactors for Carbon Fixation under Ambient-Pressure Alkaline-Hydrothermal-Vent Conditions.

The alkaline-hydrothermal-vent theory for the origin of life predicts the spontaneous reduction of CO2, dissolved in acidic ocean waters, with H2 from the alkaline vent effluent. This reaction would be catalyzed by Fe(Ni)S clusters precipitated at the interface, which effectively separate the two fluids into an electrochemical cell. Using microfluidic reactors, we set out to test this concept. We produced thin, long Fe(Ni)S precipitates of less than 10 µm thickness. Mixing simplified analogs of the acidic-ocean and alkaline-vent fluids, we then tested for the reduction of CO2. We were unable to detect reduced carbon products under a number of conditions. As all of our reactions were performed at atmospheric pressure, the lack of reduced carbon products may simply be attributable to the low concentration of hydrogen in our system, suggesting that high-pressure reactors may be a necessity.

Development of polymeric palladium-nanoparticle membrane-installed microflow devices and their application in hydrodehalogenation.

We have developed a variety of polymeric palladium-nanoparticle membrane-installed microflow devices. Three types of polymers were convoluted with palladium salts under laminar flow conditions in a microflow reactor to form polymeric palladium membranes at the laminar flow interface. These membranes were reduced with aqueous sodium formate or heat to create microflow devices that contain polymeric palladium-nanoparticle membranes. These microflow devices achieved instantaneous hydrodehalogenation of aryl chlorides, bromides, iodides, and triflates by 10-1000 ppm within a residence time of 2-8 s at 50-90 °C by using safe, nonexplosive, aqueous sodium formate to quantitatively afford the corresponding hydrodehalogenated products. Polychlorinated biphenyl (10-1000 ppm) and polybrominated biphenyl (1000 ppm) were completely decomposed under similar conditions, yielding biphenyl as a fungicidal compound.