RESUMO
OBJECTIVE: National guidelines in the United States recommend the intramuscular and intranasal routes for midazolam for the management of seizures in the prehospital setting. We evaluated the association of route of midazolam administration with the use of additional benzodiazepine doses for children with seizures cared for by emergency medical services (EMS). METHODS: We conducted a retrospective cohort study from a US multiagency EMS dataset for the years 2018-2022, including children transported to the hospital with a clinician impression of seizures, convulsions, or status epilepticus, and who received an initial correct weight-based dose of midazolam (.2 mg/kg intramuscular, .1 mg/kg intravenous, .2 mg/kg intranasal). We evaluated the association of route of initial midazolam administration with provision of additional benzodiazepine dose in logistic regression models adjusted for age, vital signs, pulse oximetry, level of consciousness, and time spent with the patient. RESULTS: We included 2923 encounters with patients who received an appropriate weight-based dose of midazolam for seizures (46.3% intramuscular, 21.8% intranasal, 31.9% intravenous). The median time to the first dose of midazolam from EMS arrival was similar between children who received intramuscular (7.3 min, interquartile range [IQR] = 4.6-12.5) and intranasal midazolam (7.8 min, IQR = 4.5-13.4) and longer for intravenous midazolam (13.1 min, IQR = 8.2-19.4). At least one additional dose of midazolam was given to 21.4%. In multivariable models, intranasal midazolam was associated with higher odds (odds ratio [OR] = 1.39, 95% confidence interval [CI] = 1.10-1.76) and intravenous midazolam was associated with similar odds (OR = 1.00, 95% CI = .80-1.26) of requiring additional doses of benzodiazepines relative to intramuscular midazolam. SIGNIFICANCE: Intranasal midazolam was associated with greater odds of repeated benzodiazepine dosing relative to initial intramuscular administration, but confounding factors could have affected this finding. Further study of the dosing and/or the prioritization of the intranasal route for pediatric seizures by EMS clinicians is warranted.
Assuntos
Administração Intranasal , Serviços Médicos de Emergência , Midazolam , Convulsões , Humanos , Midazolam/administração & dosagem , Convulsões/tratamento farmacológico , Feminino , Masculino , Pré-Escolar , Criança , Serviços Médicos de Emergência/métodos , Estudos Retrospectivos , Injeções Intramusculares , Lactente , Estudos de Coortes , Anticonvulsivantes/administração & dosagem , Anticonvulsivantes/uso terapêutico , Adolescente , Administração IntravenosaRESUMO
The local structures of Ti based MXene-type electrode materials have been studied by Ti K-edge X-ray absorption fine structure measurements as a function of temperature to obtain direct information on the local bond lengths and their stiffness. In particular, the parent MAX phases Ti2AlC and Ti3AlC2 and their etched MXene systems are characterized and their properties compared. We find that selective etching has a substantial effect on the local structural properties of the Ti based MXene materials. It leads to an increase in the interatomic distances, i.e. a decrease in the covalency, and corresponding bond stiffness, that is a likely cause of higher achievable performances. The obtained results underline the importance of the local atomic correlations as limiting factors in the diffusion capacity of ion batteries.
RESUMO
It is desirable for secondary batteries to have high capacities and long lifetimes. This paper reports the use of Na2 FeS2 with a specific structure consisting of edge-shared and chained FeS4 as the host structure and as a high-capacity active electrode material. An all-solid-state sodium cell that uses Na2 FeS2 exhibits a high capacity of 320 mAh g-1 , which is close to the theoretical two-electron reaction capacity of 323 mAh g-1 , and operates reversibly for 300 cycles. The excellent electrochemical properties of all-solid-state sodium cells are derived from the anion-cation redox and rigid host structure during charging/discharging. In addition to the initial one-electron reaction of Nax FeS2 (1 ≤ x ≤ 2) activated Fe2+ /Fe3+ redox as the main redox center, the reversible sulfur redox further contributes to the high capacity. Although the additional sulfur redox affects the irreversible crystallographic changes, stable and reversible redox reactions are observed without capacity fading, owing to the local maintenance of the chained FeS4 in the host structure. Sodium iron sulfide Na2 FeS2 , which combines low-cost elements, is one of the candidates that can meet the high requirements of practical applications.
RESUMO
STUDY OBJECTIVE: While often prioritized in the resuscitation of patients with out-of-hospital cardiac arrest, the optimal timing of advanced airway insertion is unknown. We evaluated the association between the timing of advanced airway (laryngeal tube and endotracheal intubation) insertion attempt and survival to hospital discharge in adult out-of-hospital cardiac arrest. METHODS: We performed a secondary analysis of the Pragmatic Airway Resuscitation Trial (PART), a clinical trial comparing the effects of laryngeal tube and endotracheal intubation on outcomes after adult out-of-hospital cardiac arrest. We stratified the cohort by randomized airway strategy (laryngeal tube or endotracheal intubation). Within each subset, we defined a time-dependent propensity score using patients, arrest, and emergency medical services systems characteristics. Using the propensity score, we matched each patient receiving an initial attempt of laryngeal tube or endotracheal intubation with a patient at risk of receiving laryngeal tube or endotracheal intubation attempt within the same minute. RESULTS: Of 2,146 eligible patients, 1,091 (50.8%) and 1,055 (49.2%) were assigned to initial laryngeal tube and endotracheal intubation strategies, respectively. In the propensity score-matched cohort, timing of laryngeal tube insertion attempt was not associated with survival to hospital discharge: 0 to lesser than 5 minutes (risk ratio [RR]=1.35, 95% confidence interval [CI] 0.53 to 3.44); 5 to lesser than10 minutes (RR=1.07, 95% CI 0.66 to 1.73); 10 to lesser than 15 minutes (RR=1.17, 95% CI 0.60 to 2.31); or 15 to lesser than 20 minutes (RR=2.09, 95% CI 0.35 to 12.47) after advanced life support arrival. Timing of endotracheal intubation attempt was also not associated with survival: 0 to lesser than 5 minutes (RR=0.50, 95% CI 0.05 to 4.87); 5 to lesser than10 minutes (RR=1.20, 95% CI 0.51 to 2.81); 10 to lesser than15 minutes (RR=1.03, 95% CI 0.49 to 2.14); 15 to lesser than 20 minutes (RR=0.85, 95% CI 0.30 to 2.42); or more than/equal to 20 minutes (RR=0.71, 95% CI 0.07 to 7.14). CONCLUSION: In the PART, timing of advanced airway insertion attempt was not associated with survival to hospital discharge.
Assuntos
Intubação Intratraqueal/métodos , Parada Cardíaca Extra-Hospitalar/terapia , Ressuscitação/métodos , Tempo para o Tratamento , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Parada Cardíaca Extra-Hospitalar/mortalidade , Pontuação de Propensão , Estudos Retrospectivos , Resultado do Tratamento , Adulto JovemRESUMO
The Mn 3d electronic-structure change of the LiMn2O4 cathode during Li-ion extraction/insertion in an aqueous electrolyte solution was studied by operando resonant soft X-ray emission spectroscopy (RXES). The Mn L3 RXES spectra for the charged state revealed the Mn4+ state with strong charge-transfer from the O 2p to Mn 3d orbitals dominates, while for the open-circuit-voltage and discharged states it is ascribed to the mixture of sites with Mn3+ and Mn4+ states. The degree of charge transfer is significantly different between the Mn3+ and Mn4+ states, indicating that the redox reaction takes place on the strongly-hybridized Mn 3d-O 2p orbital rather than the localized Mn 3d orbital.
RESUMO
The development of efficient electrochemical energy storage (EES) devices is an important sustainability issue to realize green electrical grids. Charge storage mechanisms in present EES devices, such as ion (de)intercalation in lithium-ion batteries and electric double layer formation in capacitors, provide insufficient efficiency and performance for grid use. Intercalation pseudocapacitance (or redox capacitance) has emerged as an alternative chemistry for advanced EES devices. Intercalation pseudocapacitance occurs through bulk redox reactions with ultrafast ion diffusion. In particular, the metal carbide/nitride nanosheets termed MXene discovered in 2011 are a promising class of intercalation pseudocapacitor electrode materials because of their compositional versatility for materials exploration (e.g., Ti2CT x, Ti3C2T x, V2CT x, and Nb2CT x, where T is a surface termination group such as F, Cl, O, or OH), high electrical conductivity for high current charge, and a layered structure of stacked nanosheets for ultrafast ion intercalation. Various MXene electrodes have been reported to exhibit complementary battery performance, such as large specific capacity at high charge/discharge rates. However, general design strategies of MXenes for EES applications have not been established because of the limited understanding of the electrochemical mechanisms of MXenes. This Account describes current knowledge of the fundamental electrochemical properties of MXenes and attempts to clarify where intercalation capacitance ends and intercalation pseudocapacitance begins. MXene electrodes in aqueous electrolytes exhibit intercalation of hydrated cations. The hydrated cations form an electric double layer in the interlayer space to give a conventional capacitance within the narrow potential window of aqueous electrolytes. When nonaqueous electrolytes are used, although solvated cations are intercalated into the interlayer space during the initial stage of charging, the confined solvation shell should gradually collapse because of the large inner potential difference in the interlayer space. Upon further charging, desolvated ions solely intercalate, and the atomic orbitals of the desolvated cations overlap with the orbitals of MXene to form a donor band. The formation of the donor band induces the reduction of MXene, giving rise to an intercalation pseudocapacitance through charge transfer from the ions to MXene sheets. Differences in the electrochemical reaction mechanisms lead to variation of the electrochemical responses of MXenes (e.g., cyclic voltammetry curves, specific capacitance), highlighting the importance of establishing a comprehensive grasp of the electrochemical reactions of MXenes at an atomic level. Because of their better charge storage kinetics compared with those of typical materials used in present EES devices, aqueous/nonaqueous asymmetric capacitors using titanium carbide MXene electrodes are capable of efficient operation at high charge/discharge rates. Therefore, the further development of novel MXene electrodes for advanced EES applications is warranted.
RESUMO
Owing to developments in theoretical chemistry and computer power, the combination of calculations and experiments is now standard practice in understanding and developing new materials for battery systems. Here, we briefly review our recent combined studies based on density functional theory and molecular dynamics calculations for electrode and electrolyte materials for sodium-ion batteries. These findings represent case studies of successful combinations of experimental and theoretical methods.
RESUMO
High-energy-resolution soft X-ray emission spectroscopy (XES) was applied to understand the changes in the electronic structure of LiMn2O4 upon Li-ion extraction/insertion. Mn 2p-3d-2p resonant XES spectra were analyzed by configuration-interaction full-multiplet (CIFM) calculations, which reproduced both dd and charge-transfer (CT) excitations. From the resonant XES spectra it is found that Mn3+ and Mn4+ coexist in the initial state, while this changes into Mn4+ in the charged-state. For the discharged-state, the Mn3+ component appears again although the dd excitations are slightly modified from those for the initial state. Furthermore, negative CT energy is expected for the Mn4+ configuration, which suggests very strong hybridization between the Mn 3d and O 2p orbitals. The large difference in the CT effect between the Mn4+ and Mn3+ states should give mechanical stress to the Mn-O bond during charge-discharge cycling, leading to capacity fading.
RESUMO
Drastic electronic-structure changes in an Fe2O3 thin film anode for a Li-ion battery during discharge (lithiation) and charge (delithiation) processes were observed using operando Fe 2p soft X-ray emission spectroscopy (XES). The conversion reaction forming metallic iron due to the lithiation reaction was confirmed by operando XES in combination with the analysis using full-multiplet calculation. The valence of Fe at the open-circuit voltage (OCV) before the second cycle was not Fe3+, but Fe2+ with a weak p-d hybridization, suggesting a considerable irreversibility upon the first discharge-charge cycle and a weakened Fe-O bond after the first cycle. Moreover, we revealed that the Fe 3d electronic-structure change during the second cycle was to some extent reversible as Fe2+ (2.7 V vs. Li/Li+: open circuit voltage) â Fe0 (0.1 V vs. Li/Li+: discharged) â Fe(2+δ)+ (3.0 V vs. Li/Li+: charged). This operando Fe 2p XES in combination with the full-multiplet calculation provides detailed information for redox chemistry during a discharge-charge operation that cannot be obtained by other methods such as crystal-structure and morphology analyses. XES is thus very powerful for investigating the origin and limitation of the lithiation function of anodes involving conversion reactions.
RESUMO
BACKGROUND: Potentially preventable admissions are a target for healthcare cost containment. OBJECTIVE: To identify rates of, characterize associations with, and explore physician decision-making around potentially preventable admissions. DESIGN: A comparative cohort study was used to determine rates of potentially preventable admissions and to identify associated factors and patient outcomes. A qualitative case study was used to explore physicians' clinical decision-making. PARTICIPANTS: Patients admitted from the emergency department (ED) to the general medicine (GM) service over a total of 4 weeks were included as cases (N = 401). Physicians from both emergency medicine (EM) and GM that were involved in the cases were included (N = 82). APPROACH: Physicians categorized admissions as potentially preventable. We examined differences in patient characteristics, admission characteristics, and patient outcomes between potentially preventable and control admissions. Interviews with participating physicians were conducted and transcribed. Transcriptions were systematically analyzed for key concepts regarding potentially preventable admissions. KEY RESULTS: EM and GM physicians categorized 22.2% (90/401) of admissions as potentially preventable. There were no significant differences between potentially preventable and control admissions in patient or admission characteristics. Potentially preventable admissions had shorter length of stay (2.1 vs. 3.6 days, p < 0.001). There was no difference in other patient outcomes. Physicians discussed several provider, system, and patient factors that affected clinical decision-making around potentially preventable admissions, particularly in the "gray zone," including risk of deterioration at home, the risk of hospitalization, the cost to the patient, and the presence of outpatient resources. Differences in provider training, risk assessment, and provider understanding of outpatient access accounted for differences in decisions between EM and GM physicians. CONCLUSIONS: Collaboration between EM and GM physicians around patients in the gray zone, focusing on patient risk, cost, and outpatient resources, may provide an avenues for reducing potentially preventable admissions and lowering healthcare spending.
Assuntos
Tomada de Decisão Clínica , Admissão do Paciente/estatística & dados numéricos , Adulto , Idoso , Idoso de 80 Anos ou mais , Estudos de Casos e Controles , Estudos de Coortes , Serviço Hospitalar de Emergência/estatística & dados numéricos , Feminino , Humanos , Tempo de Internação/estatística & dados numéricos , Masculino , Pessoa de Meia-Idade , Admissão do Paciente/economia , Transferência de Pacientes/estatística & dados numéricos , Pesquisa QualitativaRESUMO
We have investigated the nanostructuring effects on the local structure of V2O5 cathode material by means of temperature dependent V K-edge X-ray absorption fine structure measurements. We have found that the nanostructuring largely affects V-O and V-V bond characteristics with a general softening of the local V-O and V-V bonds. The obtained bond strengths correlate with the specific capacity shown by the different systems, with higher capacity corresponding to softer atomic pairs. The present study suggests the key role of local atomic displacements in the diffusion and storage of ions in cathodes for batteries, providing important information for designing new functional materials.
RESUMO
The changes in the electronic structure of LiMn0.6 Fe0.4 PO4 nanowires during discharge processes were investigated by using exâ situ soft X-ray absorption spectroscopy. The Fe L-edge X-ray absorption spectrum attributes the potential plateau at 3.45â V versus Li/Li+ of the discharge curve to a reduction of Fe3+ to Fe2+ . The Mn L-edge X-ray absorption spectra exhibit the Mn2+ multiplet structure throughout the discharge process, and the crystal-field splitting was slightly enhanced upon full discharge. The configuration-interaction full-multiplet calculation for the X-ray absorption spectra reveals that the charge-transfer effect from O 2p to Mn 3d orbitals should be considerably small, unlike that from the O 2p to Fe 3d orbitals. Instead, the O K-edge X-ray absorption spectrum shows a clear spectral change during the discharge process, suggesting that the hybridization of O 2p orbitals with Fe 3d orbitals contributes essentially to the reduction.
RESUMO
Discovery of novel compounds capable of electrochemical ion intercalation is a primary step toward development of advanced electrochemical devices such as batteries. Although cyano-bridged coordination polymers including Prussian blue analogues have been intensively investigated as ion intercalation materials, the solid-state electrochemistry of the octacyanotungstate-bridged coordination polymer has not been investigated. Here, we demonstrate that an octacyanotungstate-bridged coordination polymer Tb(H2O)5[W(CN)8] operates as a Li(+)-ion intercalation electrode material. The detailed magnetic measurements reveal that the tunable amount of intercalated Li(+) ion in the solid-state redox reaction between paramagnetic [W(V)(CN)8](3-) and diamagnetic [W(IV)(CN)8](4-) in the framework enables the electrochemical control of different magnetic regimes. While the initial ferromagnetic long-range ordering is irreversibly lost upon lithium insertion, electrochemical switching between paramagnetic and short-range ordering regimes can be achieved.
RESUMO
Discovery of a new class of ion intercalation compounds is highly desirable due to its relevance to various electrochemical devices, such as batteries. Herein, we present a new iron-oxalato open framework, which showed reversible Na(+) intercalation/extraction. The hydrothermally synthesized K4Na2[Fe(C2O4)2]3â 2 H2O possesses one-dimensional open channels in the oxalato-bridged network, providing ion accessibility up to two Na(+) per the formula unit. The detailed studies on the structural and electronic states revealed that the framework exhibited a solid solution state almost entirely during Na(+) intercalation/extraction associated with the reversible redox of Fe. The present work demonstrates possibilities of the oxalato frameworks as tunable and robust ion intercalation electrode materials for various device applications.
RESUMO
Structural and morphological control is an effective approach for improvement of electrochemical properties in rechargeable batteries. One-dimensionally assembled structure composed of NASICON-type Na3 V2 (PO4 )3 nanoparticles were fabricated through an electrospinning method to meet the requirements for the development of efficient electrode materials in Na-ion batteries. High-temperature treatment of electrospun precursor fibers under an argon flow provides a nonwoven fabric of nanowires comprising crystallographically oriented nanoparticles of NASICON-type Na3 V2 (PO4 )3 within a carbon sheath. The mesostructure comprising NASICON-type Na3 V2 (PO4 )3 and carbon give a short sodium-ion transport pass and an efficient electron conduction pass. Electrochemical properties of NASICON-type Na3 V2 (PO4 )3 are improved on the basis of one-dimensional nanostructures designed in the present study.
RESUMO
The particle-size effects on the thermodynamic properties and kinetic behavior of a Li(x)FePO(4) electrode have a direct influence on the electrode properties. Thus, the development of high-performance Li-ion batteries containing a Li(x)FePO(4) cathode requires a complete understanding of the reaction mechanism at the atomic/nano/meso scale. In this work, we report electrochemical calorimetric and potentiometric studies on Li(x)FePO(4) electrodes with different particle sizes and clarify the particle-size effect on the reaction mechanism based on the entropy change of (de)lithiation. Electrochemical calorimetry results show that a reduction in particle size shrinks the miscibility gap of Li(x)FePO(4) while potentiometric measurements demonstrate that the Li(x)FePO(4) particles equilibrate into either a kinetically metastable state or a thermodynamically stable state depending on the particle size.
RESUMO
Phase separation and transformation induced by electrochemical ion insertion are key processes in achieving efficient energy storage. Exploration of novel insertion electrode materials/reactions is particularly important to unravel the atomic/molecular-level mechanism and improve the electrochemical properties. Here, we report the unconventional phase separation of a cyanide-bridged coordination polymer, Eu[Fe(CN)6]·4H2O, under electrochemical Na-ion insertion. Detailed structural analyses performed during the electrochemical reaction revealed that, in contrast to conventional electrochemical phase separation induced by the elastic interaction between nearest neighbors, the phase separation of NaxEu[Fe(CN)6]·4H2O is due to a long-range interaction, namely, cooperative rotation ordering of hexacyanoferrates. Kolmogorov-Johnson-Mehl-Avrami analysis showed that the activation energy for the phase boundary migration in NaxEu[Fe(CN)6]·4H2O is lower than that in other conventional electrode materials such as Li(1-x)FePO4.
RESUMO
The first iron complexes of high-spin iron(II) species directly coordinated to verdazyl radicals, [Fe(II)(vdCOO)2(H2O)2]·2H2O (1; vdCOO(-) = 1,5-dimethyl-6-oxo-verdazyl-3-carboxylate) and [Fe(II)(vdCOO)2(D2O)2]·2D2O (2), were synthesized. The crystal structure of 1 was investigated by single-crystal X-ray diffraction at room temperature and at 90 K. The compound crystallizes in the P1 space group with no phase transition between 300 and 90 K. The crystals are composed of discrete [Fe(II)(vdCOO)2(H2O)2] complexes and crystallization water molecules. In the complex, two vdCOO(-) ligands coordinate to the iron(II) ion in a head-to-tail arrangement and two water molecules complete the coordination sphere. The Fe-X (X = O, N) distances vary in the 2.069-2.213 Å range at 300 K and in the 2.0679-2.2111 Å range at 90 K, indicating that the iron(II) ion is in its high-spin (HS) state at both temperatures. At 300 K, one of the coordinated water molecules is H-bonded to two crystallization water molecules whereas the second one appears as loosely H-bonded to the two oxygen atoms of the carboxylate group of two neighboring complexes. At 90 K, the former H-bonds remain essentially the same whereas the second coordinated water molecule reveals a complicated behavior appearing simultaneously as tightly H-bonded to two oxygen atoms and non-H-bonded. The (57)Fe Mössbauer spectra, recorded between 300 K and 10 K, give a clue to this situation. They show two sets of doublets typical of HS iron(II) species whose intensity ratio varies smoothly with temperature. It demonstrates the existence of an equilibrium between the high temperature and low temperature forms of the compounds. The solid-state magic angle spinning (2)H NMR spectra of 2 were recorded between 310 K and 193 K. The spectra suggest the existence of a strongly temperature-dependent motion of one of the coordinated water molecules in the whole temperature range. Variable-temperature magnetic susceptibility measurements indicate an antiferromagnetic interaction (J(Fe-vd) = -27.1 cm(-1); H = -J(ij)S(i)S(j)) of the HS iron(II) ion and the radical spins with high g(Fe) and D(Fe) values (g(Fe) = 2.25, D(Fe) = +3.37 cm(-1)) for the HS iron(II) ion. Moreover, the radicals are strongly antiferromagnetically coupled through the iron(II) center (J(vd-vd) = -42.8 cm(-1)). These last results are analysed based on the framework of the magnetic orbitals formalism.
RESUMO
The electronic structure of Na2[Fe(CN)5NO]·2H2O (sodium nitroprusside: SNP) was investigated by using soft X-ray absorption (XA) spectroscopy. The Fe L2,3-edge XA spectrum of SNP exhibited distinct and very large satellite peaks for L3 and L2 regions, which is different from the spectra of hexacyanoferrates and the other iron compounds. A configuration-interaction full-multiplet calculation, in which the ligand molecular orbitals for the C4v symmetry were taken into account, revealed the Fe(2+) low-spin state with very strong effects of metal-to-ligand charge-transfer from the Fe 3d to NO 2p orbitals.