Reversible, Tunable, Electric-Field Driven Assembly of Silver Nanocrystal Superlattices.

Nanocrystal superlattices are typically fabricated by either solvent evaporation or destabilization methods that require long time periods to generate highly ordered structures. In this paper, we report for the first time the use of electric fields to reversibly drive nanocrystal assembly into superlattices without changing solvent volume or composition, and show that this method only takes 20 min to produce polyhedral colloidal crystals, which would otherwise need days or weeks. This method offers a way to control the lattice constants and degree of preferential orientation for superlattices and can suppress the uniaxial superlattice contraction associated with solvent evaporation. In situ small-angle X-ray scattering experiments indicated that nanocrystal superlattices were formed while solvated, not during drying.

Quantitatively controlled electrophoretic deposition of nanocrystal films from non-aqueous suspensions.

This study presents a novel method to correlate the mass and charge transfer kinetics during the electrophoretic deposition of nanocrystal films by using a purpose-built double quartz crystal microbalance combined with simultaneous current-measurement. Our data support a multistep process for film formation: generation of charged nanocrystal flux, charge transfer at the electrode, and polarization of neutral nanocrystals near the electrode surface. The polarized particles are then subject to dielectrophoretic forces that reduce diffusion away from the interface, generating a sufficiently high neutral particle concentration at the interface to form a film. The correlation of mass and charge transfer enables quantification of the nanocrystal charge, the fraction of charged nanocrystals, and the initial sticking coefficient of the particles. These quantities permit calculation of the film thickness, providing a theoretical basis for using concentration and voltage as process parameters to grow films of targeted thicknesses.

Calcium vapor synthesis of extremely coercive SmCo5.

Exceptionally coercive SmCo5 particles are produced through calcium vapor reduction of SmCo5O9 powders synthesized by flame spray pyrolysis. The resulting powders are composed of oblate hexagonal particles approximately 2 microns across with smooth surfaces. This microstructure yields record-breaking room temperature coercivity H c,i >80 kOe, or >60 kOe when combined with advanced manufacturing approaches such as electrophoretic deposition or molding with tetraglyme inks. These techniques enable straightforward low-loss fabrication of bulk parts. The high coercivity is extremely robust at elevated temperatures, exceeding 10 kOe even at 600 °C. The oxide precursor approach removes the need for strict environmental control during synthesis that is common to other nanoparticle-based routes and can readily be scaled to kilogram quantities of feedstock production. Magnet powders produced by calcium vapor reduction can thus function as the building blocks for traditional or advanced manufacturing techniques, while the high coercivity enables consistent performance across a wide range of temperatures.

A Bioinspired Artificial Injury Response System Based on a Robust Polymer Memristor to Mimic a Sense of Pain, Sign of Injury, and Healing.

Flexible electronic skin with features that include sensing, processing, and responding to stimuli have transformed human-robot interactions. However, more advanced capabilities, such as human-like self-protection modalities with a sense of pain, sign of injury, and healing, are more challenging. Herein, a novel, flexible, and robust diffusive memristor based on a copolymer of chlorotrifluoroethylene and vinylidene fluoride (FK-800) as an artificial nociceptor (pain sensor) is reported. Devices composed of Ag/FK-800/Pt have outstanding switching endurance >106  cycles, orders of magnitude higher than any other two-terminal polymer/organic memristors in literature (typically 102 -103 cycles). In situ conductive atomic force microscopy is employed to dynamically switch individual filaments, which demonstrates that conductive filaments correlate with polymer grain boundaries and FK-800 has superior morphological stability under repeated switching cycles. It is hypothesized that the high thermal stability and high elasticity of FK-800 contribute to the stability under local Joule heating associated with electrical switching. To mimic biological nociceptors, four signature nociceptive characteristics are demonstrated: threshold triggering, no adaptation, relaxation, and sensitization. Lastly, by integrating a triboelectric generator (artificial mechanoreceptor), memristor (artificial nociceptor), and light emitting diode (artificial bruise), the first bioinspired injury response system capable of sensing pain, showing signs of injury, and healing, is demonstrated.

Beyond Thermodynamics: Assessing the Dynamical Softness of Hydrated Ions from First Principles.

Ion (de)hydration is a key rate-determining step in interfacial processes from corrosion to electrochemical energy storage. However, predicting the kinetics of ion (de)hydration remains challenging, prompting the use of static proxies such as hydration energy and valence. While useful for assessing thermodynamic preferences, such descriptors cannot fully capture the dynamical softness of the hydration shell that dictates kinetics. Accordingly, we use first-principles molecular dynamics to analyze hydration shell softness for a diverse set of metal cations. Three dynamic metrics are introduced to intuitively describe the bond rigidity, shape deformability, and exchange fluidity of the solvation shell. Together, these metrics capture the relevant physics in the static descriptors, while offering a far more complete and efficient representation for the overall propensity for (de)hydration. Application to the hydrated ion set demonstrates a weak connection between dynamical softness and hydration energy, confirming that dynamical descriptors of hydration are key for correctly describing ion transfer processes.

Suppression of low temperature magnetic ordering in samarium nanoparticles.

The role of finite size effects on magnetic order has been investigated in samarium nanoparticles prepared by physical vapor deposition. A dense layer composed of distinct nanoparticles with a mean particle diameter of 26 nm was deposited on a diamagnetic substrate. M(T) measurements identify the expected pair of antiferromagnetic ordering temperatures in the bulk Sm precursor, at 113 K and 14 K, where the magnetic unit cell for the lower ordering temperature is 10.36 nm along the c-axis. The high temperature ordering of the hexagonal sites in the Sm nanocrystals is slightly decreased with respect to that of bulk Sm, while the low temperature transition associated with the cubic sites is significantly suppressed. The observed changes are attributed to finite size effects, with ordering suppressed as the particle radius approaches the length of the magnetic unit cell, and surface moments become more prominent.

Domain nucleation rates and interfacial line tensions in supported bilayers of ternary mixtures containing galactosylceramide.

Domains within the plane of the plasma membrane, referred to as membrane rafts, have been a topic of considerable interest in the field of membrane biophysics. Although model membrane systems have been used extensively to study lipid phase behavior as it relates to the existence of rafts, very little work has focused on either the initial stage of lipid domain nucleation, or the relevant physical parameters such as temperature and interfacial line tension which control nucleation. In this work, we utilize a method in which the kinetic process of lipid domain nucleation is imaged by atomic force microscopy and modeled using classical theory of nucleation to map interfacial line tension in ternary lipid mixtures. These mixtures consist of a fluid phase lipid component (1,2-dilauroyl-sn-glycero-3-phosphocholine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, or 1,2-dioleoyl-sn-glycero-3-phosphocholine), a solid phase component (galactosylceramide), and cholesterol. Interfacial line tension measurements of galactosylceramide-rich domains track with our previously measured area/perimeter ratios and height mismatches measured here. Line tension also follows known trends in cholesterol interactions and partitioning, as we observed previously with area/perimeter ratios. Our line tension measurements are discussed in combination with recent line tension measurements to address line tension regulation by cholesterol and the dynamic nature of membrane rafts.

Direct visualization of phase transition dynamics in binary supported phospholipid bilayers using imaging ellipsometry.

Via imaging ellipsometry, we study the phase transition dynamics induced by selective gelation of one component in a binary supported phopholipid bilayer. We find the modulation of two attendant morphological features: emergence of extended defect chains due to a net change in the molecular areas and fractal-like domains suggesting weak line tension. A time-lapse analysis of the ellipsometric images reveals the cluster size of 4-20 molecules undergoing gelation indicating weak cooperativity. These results demonstrate the use of ellipsometry for in situ, label-free, non-contact, and large-area imaging of dynamics in interfacial films.

Space- and time-resolved small angle X-ray scattering to probe assembly of silver nanocrystal superlattices.

The structure of nanocrystal superlattices has been extensively studied and well documented, however, their assembly process is poorly understood. In this work, we demonstrate an in situ space- and time-resolved small angle X-ray scattering measurement that we use to probe the assembly of silver nanocrystal superlattices driven by electric fields. The electric field creates a nanocrystal flux to the surface, providing a systematic means to vary the nanocrystal concentration near the electrode and thereby to initiate nucleation and growth of superlattices in several minutes. Using this approach, we measure the space- and time-resolved concentration and polydispersity gradients during deposition and show how they affect the superlattice constant and degree of order. We find that the field induces a size-selection effect that can reduce the polydispersity near the substrate by 21% leading to better quality crystals and resulting in field strength-dependent superlattice lattice constants.

A new model for nanoscale enamel dissolution.

The dissolution kinetics of human tooth enamel surfaces was investigated using nanomolar-sensitive constant composition (CC) and in situ atomic force microscopy (AFM) under simulated caries formation conditions (relative undersaturation with respect to hydroxyapatite = 0.902, pH = 4.5). Scanning electron microscopic (SEM) examination of the resulting etched enamel surfaces showed that deminerzalization, initiated at core/wall interfaces of rods, developed anisotropically along the c-axes. After an initial rapid removal of surface polishing artifacts, the dissolution rate decreased as the reaction proceeded in accordance with our recently proposed crystal dissolution model, resulting in hollow enamel cores and nanosized remaining crystallites, resistant to further dissolution. Generally, dissolution of minerals is regarded as a spontaneous reaction in which all the solid phase can be dissolved in undersaturated solutions. However, the dissolution of some biominerals may be suppressed when the crystallites approach nanometer size. This study shows that CC demineralization of enamel in acidic medium follows this new model that can be used to mimic carious lesion formation. In dissolution studies, nanosized enamel crystallites exhibit a remarkable degree of self-preservation in the fluctuating physiological milieu.

Ultralow Density, Monolithic WS2, MoS2, and MoS2/Graphene Aerogels.

We describe the synthesis and characterization of monolithic, ultralow density WS2 and MoS2 aerogels, as well as a high surface area MoS2/graphene hybrid aerogel. The monolithic WS2 and MoS2 aerogels are prepared via thermal decomposition of freeze-dried ammonium thio-molybdate (ATM) and ammonium thio-tungstate (ATT) solutions, respectively. The densities of the pure dichalcogenide aerogels represent 0.4% and 0.5% of full density MoS2 and WS2, respectively, and can be tailored by simply changing the initial ATM or ATT concentrations. Similar processing in the presence of the graphene aerogel results in a hybrid structure with MoS2 sheets conformally coating the graphene scaffold. This layered motif produces a ∼50 wt % MoS2 aerogel with BET surface area of ∼700 m(2)/g and an electrical conductivity of 112 S/m. The MoS2/graphene aerogel shows promising results as a hydrogen evolution reaction catalyst with low onset potential (∼100 mV) and high current density (100 mA/cm(2) at 260 mV).

In situ imaging and impedance measurements of titanium surfaces using AFM and SPIS.

Surfaces of commercially pure titanium and titanium, 6-aluminum, 4-vanadium were subjected to simultaneous polarization/impedance testing and in situ electrochemical atomic force microscopy imaging to evaluate how the structure and properties of the passive oxide film is affected by varying potential and hydration. Current transients were acquired via a step polarization impedance spectroscopy technique: the voltage was stepped between -1 and 1 V in 50 mV increments, while current transients and surface morphology were digitally recorded. Numerical Laplace transformation applied to the current transient data provided frequency-dependent admittance (impedance(-1)). Simultaneous AFM imaging of dry surfaces, initially hydrated surfaces, and surfaces immersed and changing with potential revealed that all sample surfaces were covered with protective titanium oxide domes that grew in area and coalesced due to hydration and as a function of increasing applied voltage and time. Reversal of dome growth did not occur upon voltage reduction, while impedance behavior was quasi-reversible, suggesting independence between structural and electrical properties. Oxide growth appeared to occur in part by lateral spreading and overgrowth of domes at the oxide-solution interface. Interfacial impedance data reflect oxide passivity and n-type semiconductor behavior. Non-linear Mott-Schottky fits specified multi-layer donor concentrations between 10(18) and 10(19)cm(-3), depending on the surface.

Effect of hydrogen peroxide on titanium surfaces: in situ imaging and step-polarization impedance spectroscopy of commercially pure titanium and titanium, 6-aluminum, 4-vanadium.

To analyze titanium's response to representative surgical wound environments, a study was conducted on commercially pure titanium (CPTi) and titanium, 6-aluminum, 4-vanadium (Ti-6Al-4V) exposed to phosphate-buffered saline (PBS) with 30 mM of hydrogen peroxide (H(2)O(2)) added. The study was characterized by simultaneous electrochemical atomic force microscopy (EC AFM) and step-polarization impedance spectroscopy (SPIS). Surfaces were covered with protective oxide domes that indicated topography changes with potential and time of immersion. Less oxide dome coarsening was noted on surfaces treated with PBS containing H(2)O(2) than on surfaces exposed to pure PBS. Electrical data deduced from current transients collected while stepping voltage between 0 V and 1 V indicated that charge transfer in hydrogen peroxide solutions was an order of magnitude larger than it was in pure PBS. Oxide (early) resistances of CPTi samples were higher than were Ti-6Al-4V oxide resistances in both types of solutions, but CPTi oxide resistance was lower in the hydrogen peroxide solution compared to pure PBS. Capacitance data suggest that CPTi oxide films thicken in hydrogen peroxide solution more than they do in pure PBS. Differences in electrical properties between CPTi and Ti-6Al-4V surfaces suggest that CPTi, but not Ti-6Al-4V, has catalytic activity on H(2)O(2) and that the catalytic activity of CPTi oxide affects its ability to grow TiO(2). Differences in electrical properties are related to catalytic and oxidative mechanisms that take place directly on the titanium oxide surface and in wound environments. The study provides a foundation and theoretic basis for the porous oxide model on commercially pure titanium exposed to hydrogen peroxide.

Improving nanoparticle dispersion and charge transfer in cadmium telluride tetrapod and conjugated polymer blends.

The dispersion of CdTe tetrapods in a conducting polymer and the resulting charge transfer is studied using a combination of confocal fluorescence microscopy and atomic force microscopy (AFM). The results of this work show that both the tetrapod dispersion and charge transfer between the CdTe and conducting polymer (P3HT) are greatly enhanced by exchanging the ligands on the surface of the CdTe and by choosing proper solvent mixtures. The ability to experimentally probe the relationship between particle dispersion and charge transfer through the combination of AFM and fluorescence microscopy provides another avenue to assess the performance of polymer/semiconductor nanoparticle composites.

Molecular mechanisms of crystallization impacting calcium phosphate cements.

The biomineral calcium hydrogen phosphate dihydrate (CaHPO(4).2H(2)O), known as brushite, is a malleable material that both grows and dissolves faster than most other calcium minerals, including other calcium phosphate phases, calcium carbonates and calcium oxalates. Within the body, this ready formation and dissolution can play a role in certain diseases, such as kidney stone and plaque formation. However, these same properties, along with brushite's excellent biocompatibility, can be used to great benefit in making resorbable biomedical cements. To optimize cements, additives are commonly used to control crystallization kinetics and phase transformation. This paper describes the use of in situ scanning probe microscopy to investigate the role of several solution parameters and additives in brushite atomic step motion. Surprisingly, this work demonstrates that the activation barrier for phosphate (rather than calcium) incorporation limits growth kinetics and that additives such as magnesium, citrate and bisphosphonates each influence step motion in distinctly different ways. Our findings provide details of how, and where, molecules inhibit or accelerate kinetics. These insights have the potential to aid in designing molecules to target specific steps and to guide synergistic combinations of additives.

Thermally induced phase separation in supported bilayers of glycosphingolipid and phospholipid mixtures.

The authors have studied microstructure evolution during thermally induced phase separation in a class of binary supported lipid bilayers using a quantitative application of imaging ellipsometry. The bilayers consist of binary mixtures consisting of a higher melting glycosphingolipid, galactosylceramide (GalCer), which resides primarily in the outer leaflet, and a lower melting, unsaturated phospholipid, 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC). Three different bilayer compositions of GalCer/DLPC mixtures at 35:65, 20:80, and 10:90 molar ratios were cooled at controlled rates from their high-temperature homogeneous phase to temperatures corresponding to their phase coexistence regime and imaged in real time using imaging ellipsometry. During the thermotropic course of GalCer gelation, we find that two distinct types of morphological features modulate. First, the formation and growth of chain and fractal-like defects ascribed to the net change in molecular areas during the phase transition. The formation of these defects is consistent with the expected contraction in the molecular area during the liquid crystalline to gel-phase transition. Second, the nucleation and growth of irregularly shaped gel-phase domains, which exhibit either line-tension dominated compact shape or dendritic domains with extended interfaces. Quantifying domain morphology within the fractal framework reveals a close correspondence, and the quantization of the transition width confirms previous estimates of reduced phase transition cooperativity in supported bilayers. A comparison of domain properties indicates that thermal history, bilayer composition, and cooling rate all influence microstructure details including shapes, sizes, and distributions of domains and defects: At lower cooling rates and lower GalCer fractions compact domains form and at higher GalCer fractions (or at higher cooling rates) dendritic domains are evident. This transition of domain morphology from compact shapes to dendritic shapes at higher cooling rates and higher relative fractions of GalCer suggests kinetic control of shape equilibration in these phospho- and glycolipid mixtures.

Raman spectroscopy of DNA packaging in individual human sperm cells distinguishes normal from abnormal cells.

Healthy human males produce sperm cells of which about 25-40% have abnormal head shapes. Increases in the percentage of sperm exhibiting aberrant sperm head morphologies have been correlated with male infertility, and biochemical studies of pooled sperm have suggested that sperm with abnormal shape may contain DNA that has not been properly repackaged by protamine during spermatid development. We have used micro-Raman spectroscopy to obtain Raman spectra from individual human sperm cells and examined how differences in the Raman spectra of sperm chromatin correlate with cell shape. We show that Raman spectra of individual sperm cells contain vibrational marker modes that can be used to assess the efficiency of DNA-packaging for each cell. Raman spectra obtained from sperm cells with normal shape provide evidence that DNA in these sperm is very efficiently packaged. We find, however, that the relative protein content per cell and DNA packaging efficiencies are distributed over a relatively wide range for sperm cells with both normal and abnormal shape. These findings indicate that single cell Raman spectroscopy should be a valuable tool in assessing the quality of sperm cells for in-vitro fertilization.