Binary Metallic CuCo5 S8 Anode for High Volumetric Sodium-Ion Storage.

With the rapid improvement of compact smart devices, fabricating anode materials with high volumetric capacity has gained substantial interest for future sodium-ion batteries (SIBs) applications. Herein, a novel bimetal sulfide CuCo5 S8 material is proposed with enhanced volumetric capacity due to the intrinsic metallic electronic conductivity of the material and multi-electron transfer during electrochemical procedures. Due to the intrinsic metallic behavior, the conducting additive (CA) could be removed from the electrode fabrication without scarifying the high rate capability. The CA-free CuCo5 S8 electrode can achieve a high volumetric capacity of 1436.4 mA h cm-3 at a current density of 0.2 A g-1 and 100 % capacity retention over 2000 cycles in SIBs, outperforming most metal chalcogenides, owing to the enhanced electrode density. Reversible conversion reactions are revealed by combined measurements for sodium systems. The proposed new strategy offers a viable approach for developing innovative anode materials with high-volumetric capacity.

Using 3.0 eV Large Bandgap Conjugated Polymer as Host Donor to Construct Ternary Semi-Transparent Polymer Solar Cells: Increased Average Visible Transmittance and Modified Color Temperature.

Although optical engineering strategy has been utilized to optimize average visible transmittance (AVT) of semi-transparent organic solar cells (ST-OSCs), judicious selection of active layer materials should be more direct and basic. Herein, an efficient ternary active layer is constructed with a wide bandgap (3.0 eV) fluorescent polymer FC-S1 as host donor, a middle bandgap polymer PM6 as guest donor, and a narrow bandgap non-fullerene Y6-BO as acceptor. Using FC-S1 as the host donor can allow more visible photons to penetrate the device. In the absence of optical engineering, the ternary ST-OSC with FC-S1:PM6:Y6-BO = 1:0.3:1.5 active layer of 30 nm thickness displays a much higher AVT of 49.28% than that of 32.34% for a PM6:Y6-BO = 1.3:1.5 based binary ST-OSC. The ternary ST-OSC provides a good power conversion efficiency of 6.01%, only slightly lower than 7.15% for the binary ST-OSC. The ternary ST-OSC also demonstrates a color rendering index (CRI) of 87 and a correlated color temperature (CCT) of 6916 K, all better than CRI of 80 and CCT of 9022 K for the binary ST-OSC. Moreover, the backbone of FC-S1 is mainly composed by fluorene and carbazole, two easily-accessible aromatic rings, which would meet low-cost concern of ST-OSCs.

Genome-wide identification and expression analysis of HSP90 gene family in Nicotiana tabacum.

BACKGROUND: Heat shock proteins 90 (HSP90s) are a highly conserved protein family of cellular chaperones widely found in plants; they play a fundamental role in response to biotic and abiotic stresses. The genome-wide analysis of HSP90 gene family has been completed for some species; however, it has been rarely reported for the tobacco HSP90 genes. RESULTS: In this study, we systematically conducted genome-wide identification and expression analysis of the tobacco HSP90 gene family, including gene structures, evolutionary relationships, chromosomal locations, conserved domains, and expression patterns. Twenty-one NtHSP90s were identified and classified into eleven categories (NtHSP90-1 to NtHSP90-11) based on phylogenetic analysis. The conserved structures and motifs of NtHSP90 proteins in the same subfamily were highly consistent. Most NtHSP90 proteins contained the ATPase domain, which was closely related to conserved motif 2. Motif 5 was a low complexity sequence and had the function of signal peptide. At least 6 pairs of NtHSP90 genes underwent gene duplication, which arose from segment duplication and tandem duplication events. Phylogenetic analysis showed that most species expanded according to their own species-specific approach during the evolution of HSP90s. Dynamic expression analysis indicated that some NtHSP90 genes may play fundamental roles in regulation of abiotic stress response. The expression of NtHSP90-4, NtHSP90-5, and NtHSP90-9 were up-regulated, while NtHSP90-6, and NtHSP90-7 were not induced by ABA, drought, salt, cold and heat stresses. Among the five treatments, NtHSP90s were most strongly induced by heat stress, and weakly activated by ABA treatment. There was a similar response pattern of NtHSP90s under osmotic stress, or extreme temperature stress. CONCLUSIONS: This is the first genome-wide analysis of Hsp90 in N. tabacum. These results indicate that each NtHSP90 member fulfilled distinct functions in response to various abiotic stresses.

Genome-wide identification and characterization of Hsp70 gene family in Nicotiana tabacum.

Heat shock proteins 70 (Hsp70) constitute a highly conserved protein family of cellular chaperones widely distributed in plants, where they play a fundamental role in response to biotic and abiotic stress. Until now, genome-wide analyses of the Hsp70 gene family have been conducted for some species. However, reports about Hsp70 genes in Nicotiana tabacum are scarce. In this study, we systematically conducted genome-wide identification and expression analysis of the Hsp70 gene family in tobacco, including gene structure, classification, evolutionary relationships, promoters, and transcript levels in response to abiotic stress treatments. In all, 61 Hsp70 members were identified and classified into six groups that were mapped onto 18 chromosomes, where most were distributed on both ends of the chromosome. The conserved structures and motifs of NtHsp70 proteins in the same subfamily were highly consistent. At least 15 pairs of NtHsp70 genes underwent gene duplication by segment and tandem duplications. Most NtHsp70 proteins contained N-terminal hexokinase conserved motifs. Phylogenetic analysis showed that most species expanded according to their own species-specific approach during the evolution of Hsp70s. Tissue-specific expression analysis indicated that all NtHsp70 genes were involved in at least one or more abiotic stress responses, highlighting the wide participation of NtHsp70 genes in environmental adaptation. This is the first genome-wide analysis of Hsp70 in N. tabacum. These results indicate that each NtHsp70 member fulfilled distinct functions in response to various abiotic stresses.

Asymmetric Alkyl Side-Chain Engineering of Naphthalene Diimide-Based n-Type Polymers for Efficient All-Polymer Solar Cells.

The design and synthesis of three n-type conjugated polymers based on a naphthalene diimide-thiophene skeleton are presented. The control polymer, PNDI-2HD, has two identical 2-hexyldecyl side chains, and the other polymers have different alkyl side chains; PNDI-EHDT has a 2-ethylhexyl and a 2-decyltetradecyl side chain, and PNDI-BOOD has a 2-butyloctyl and a 2-octyldodecyl side chain. These copolymers with different alkyl side chains exhibit higher melting and crystallization temperatures, and stronger aggregation in solution, than the control copolymer PNDI-2HD that has the same side chain. Polymer solar cells based on the electron-donating copolymer PTB7-Th and these novel copolymers exhibit nearly the same open-circuit voltage of 0.77 V. Devices based on the copolymer PNDI-BOOD with different side chains have a power-conversion efficiency of up to 6.89%, which is much higher than the 4.30% obtained with the symmetric PNDI-2HD. This improvement can be attributed to the improved charge-carrier mobility and the formation of favorable film morphology. These observations suggest that the molecular design strategy of incorporating different side chains can provide a new and promising approach to developing n-type conjugated polymers.

Procyanidine alleviates bisphenol A-induced apoptosis in TM3 cells via the Nrf2 signaling pathway.

Contaminated foods are a major source of bisphenol A (BPA) and are widely used in food packaging. Prolonged exposure to BPA can cause reproductive dysfunction in humans. Procyanidine (PC) is a potent natural antioxidant; however, the exact mechanism by which PC mitigates Leydig cell damage caused by BPA is unknown. In this study, the protective effect of PC against BPA-induced TM3 cell damage was investigated, and the underlying mechanism was assessed. PC treatment attenuates BPA-induced TM3 cell damage by suppressing oxidative stress and inhibiting TM3 apoptosis. In addition, PC upregulates the expression of nuclear factor erythroid 2-related factor 2 (Nrf2) and its downstream antioxidant target genes. Treatment with the NRF2 inhibitor ML385 reversed the PC-induced upregulation of the mRNA expression of these genes. Overall, PC may mitigate BPA-induced cell damage by activating the Nrf2 signaling pathway, suggesting that PC supplementation may alleviate BPA toxicity in TM3 cells.

Extensive laminectomy for the treatment of ossification of the posterior longitudinal ligament in the cervical spine.

OBJECTIVE: To introduce the surgical strategy of extensive laminectomy (with inner 1/4 facet joint resection to expose the origin of the nerve root) and to discuss its benefit for the treatment of cervical ossification of the posterior longitudinal ligament (OPLL) with myelopathy. METHODS: From January 1998 to December 2005, 82 patients with cervical OPLL underwent extensive laminectomy. We assessed neurological function using the Japanese Orthopedic Association (JOA) scoring system, neck/shoulder pain using a visual analogue scale (VAS), and cervical curvature index (CCI) by the Ishihara method; the expansion degree and the drift-back distance of the spinal cord was calculated using the MRI image. RESULTS: The mean duration of follow-up was 41.6 months. The postoperative JOA score suggested that neurological function improved significantly with a recovery rate of 64%. The incidence rate of transient palsy of the C5 nerve root, which occurred in only 2 patients who recovered to useful function over 2 weeks, was 2.4%. The postoperative VAS score suggested that the pain in the neck/shoulder was mild. Although the postoperative CCI was small, there was no correlation with the length of follow-up period. The increased cross-sectional area of the dural sac at the level of maximum compression together with the significant drift-back distance of the spinal cord suggested that decompression was complete. CONCLUSION: Extensive laminectomy is effective in treating cervical OPLL, with mild cervical/shoulder pain, low rate of C5 nerve root palsy, and no recurrence of spinal cord compression symptoms.

Delicately Controlled Polymer Orientation for High-Performance Non-Fullerene Solar Cells with Halogen-Free Solvent Processing.

Molecular orientation in polymer solar cells (PSCs) is a critical subject of investigation that promotes the quality of bulk heterojunction morphology and power conversion efficiency (PCE). Herein, the intrinsic polymer orientation transition can be found upon delicate control over the branching point position of the irregular alkoxy side chain in difluoroquinoxaline-thiophene-based conjugated polymers. Three polymers with branching points at the third, fourth, and fifth positions away from the backbone were synthesized and abbreviated as PHT3, PHT4, and PHT5, respectively. Temperature-dependent absorption behavior manifests the polymer aggregation ability in the order of PHT3 < PHT4 < PHT5. Surprisingly, the polymer orientation transition from typical face-on to edge-on emerged between PHT4 and PHT5, as evidenced by X-ray-scattering analysis. The enhanced face-on crystallinity of PHT4 endowed the o-xylene-processed PHT4:IT-4Cl-based devices with the highest PCE of 13.40%. For PHT5 with stronger aggregation, the related o-xylene-processed PSCs still showed a good PCE of 12.66%. Our results demonstrate that a delicate polymer orientation transition could be realized through a precisely controlled strategy of the side chain, yielding green-solvent-processed high-performance PSCs.

Impact of the Siloxane-Terminated Side Chain on Photovoltaic Performances of the Dithienylbenzodithiophene-Difluorobenzotriazole-Based Wide Band Gap Polymer Donor in Non-Fullerene Polymer Solar Cells.

To thoroughly disclose the role of the siloxane-terminated side chain with different substituent positions, three difluorobenzotriazole-dithienylbenzodithiophene (FTAZ-BDTT)-based polymers PBZ-1Si, PBZ-2Si, and PBZ-3Si with the siloxane-terminated side chain on the FTAZ unit (PBZ-1Si), on the BDTT unit (PBZ-2Si), and both on BDTT and FTAZ units (PBZ-3Si), respectively, were synthesized. The different side chain substitutions have slight influences on absorption behavior, thermal stability, and frontier molecular orbitals but have shown a great effect on the aggregation of the polymers. Grazing-incidence wide-angle X-ray scattering measurements reveal that, relative to PBZ-1Si with branched alkyl on the BDTT unit, polymers PBZ-2Si and PBZ-3Si, bearing the siloxane-terminated side chains on the BDTT unit, exhibit smaller π-π stacking distances and larger crystal coherence lengths, suggesting that adopting the siloxane-terminated side chain on the BDTT unit can promote the interchain π-π interaction and the ordering of molecular packing. With IT-M as the non-fullerene acceptor, among the three polymers, the PBZ-2Si-based active layer possesses the highest ordered crystals for both polymers and IT-M as well as the purest domain, which affords efficient exciton dissociation, the most balanced hole-electron transport, and reduced recombination, leading to the highest short-circuit current density (Jsc) and fill factor (FF) and then the highest power conversion efficiency (PCE) of 11.14%. In contrast, PBZ-1Si- and PBZ-3Si-based devices show lower PCEs of 8.98 and 9.92%, respectively. Moreover, PBZ-2Si:IT-M also exhibits good thickness tolerance, and its thick active layer of 240 nm shows the most limited decrease of efficiency after 77 days of storage, supplying good potential for mass fabrication. Our work suggests that the fine pairing of a siloxane-terminated side chain and an alkyl side chain is beneficial for the optimizing of a conjugated polymer donor toward high-performance non-fullerene polymer solar cells.

5,6-Difluorobenzothiazole-Based Conjugated Polymers with Large Band Gaps and Deep Highest Occupied Molecular Orbital Levels.

A 5,6-difluorobenzothiazole-based dibromo monomer was successfully synthesized, from which new fluorinated conjugated polymers PF-ffBTz and PFN-ffBTz were prepared via copolymerizations with two fluorene-based diboronic ester monomers. Twisted fluorene-ffBTz backbones enable PF-ffBTz and PFN-ffBTz with large band gaps up to 3.10 eV and deep-lying highest occupied molecular orbital levels down to -6.2 eV. The chemical structures of PF-ffBTz and PFN-ffBTz impart some new functionalities of fluorinated conjugated polymers. PF-ffBTz can show deep blue electroluminescent emission, with high external quantum efficiency of 3.71%. PFN-ffBTz, with amino-functionalized side chains on the fluorene unit, can serve as an efficient cathode interlayer in inverted polymer solar cells (PSCs), showing better photovoltaic performances if compared with a ZnO interlayer. In addition, it is found that using an optical filter to cut off the short wavelength section (≤380 nm) of incident light can significantly elevate photostability of PSCs under continuous illumination.

All-Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane-Functionalized Side Chains with Efficiency over 10.

A novel wide-bandgap conjugated copolymer based on an imide-functionalized benzotriazole building block containing a siloxane-terminated side-chain is developed. This copolymer is successfully used to fabricate highly efficient all-polymer solar cells (all-PSCs) processed at room temperature with the green-solvent 2-methyl-tetrahydrofuran. When paired with a naphthalene diimide-based polymer electron-acceptor, the all-PSC exhibits a maximum power conversion efficiency (PCE) of 10.1%, which is the highest value so far reported for an all-PSC. Of particular interest is that the PCE remains 9.4% after thermal annealing at 80 °C for 24 h. The resulting high efficiency is attributed to a combination of high and balanced bulky charge carrier mobility, favorable face-on orientation, and high crystallinity. These observations indicate that the resulting copolymer can be a promising candidate toward high-performance all-PSCs for practical applications.

A Highly Crystalline Wide-Band-Gap Conjugated Polymer toward High-Performance As-Cast Nonfullerene Polymer Solar Cells.

A new wide-band-gap conjugated polymer PBODT was successfully synthesized that showed high crystallinity and was utilized as the active material in nonfullerene bulk-heterojunction polymer solar cells (PSCs). The photovoltaic devices based on the as-cast blend films of PBODT with ITIC and IDIC acceptors showed notable power conversion efficiencies (PCEs) of 7.06% and 9.09%, with high open-circuit voltages of 1.00 and 0.93 V that correspond to low energy losses of 0.59 and 0.69 eV, respectively. In the case of PBODT:ITIC, lower exciton quenching efficiency and monomolecular recombination are found for devices with small driving force. On the other hand, the relatively higher driving force and suppressed monomolecular recombination for PBODT:IDIC devices are identified to be the reason for their higher short-circuit current density (Jsc) and higher PCEs. In addition, when processed with the nonchlorinated solvent 1,2,4-trimethylbenzene, a good PCE of 8.19% was still achieved for the IDIC-based device. Our work shows that such wide-band-gap polymers have great potential for the environmentally friendly fabrication of highly efficient PSCs.

Molecular dynamics simulations for the examination of mechanical properties of hydroxyapatite/ poly α-n-butyl cyanoacrylate under additive manufacturing.

Molecular dynamics (MD) simulations emerged to be a helpful tool in the field of material science. In rapid prototyping artificial bone scaffolds process, the binder spraying volume and mechanism are very important for bone scaffolds mechanical properties. In this study, we applied MD simulations to investigating the binding energy of α-n-butyl cyanoacrylate (NBCA) on Hydroxyapatite (HA) crystallographic planes (001, 100 and 110), and to calculating and analyzing the mechanical properties and radial distribution function of the HA(110)/NBCA mixed system. The simulation results suggested that HA (110) has the highest binding energy with NBCA owing to the high planar atom density, and the mechanical properties of HA(110)/NBCA mixed system is stronger than pure HA system. Therefore, the multi-grade strength bone scaffold could be fabricated through spraying various volume NBCA binders during 3D printing process. By calculating the radial distribution function of HA(110)/NBCA, the essence of the interface interaction were successfully elucidated. The forming situation parameters can be referred to calculation results. There exists a strong interaction between HA crystallographic plane (110) and NBCA, it is mainly derived from the hydrogen bonds between O atoms which connect with C atoms of NBCA and H atoms in HA crystal. Furthermore, a strong adsorption effect can be demonstrated between HA and NBCA.