RESUMO
Fibers have played a critical role in the long history of human development. They are the basic building blocks of textiles. Synthetic fibers not only make clothes stronger and more durable, but are also customizable and cheaper. The growth of miniature and wearable electronics has promoted the development of smart and multifunctional fibers. Particularly, the incorporation of functional semiconductors and electroactive materials in fibers has opened up the field of fiber electronics. The energy supply system is the key branch for fiber electronics. Herein, after a brief introduction on the history of smart and functional fibers, we review the current state of advanced functional fibers for their application in energy conversion and storage, focusing on nanogenerators, solar cells, supercapacitors and batteries. Subsequently, the importance of the integration of fiber-shaped energy conversion and storage devices via smart structure design is discussed. Finally, the challenges and future direction in this field are highlighted. Through this review, we hope to inspire scientists with different research backgrounds to enter this multi-disciplinary field to promote its prosperity and development and usher in a truly new era of smart fibers.
RESUMO
The recently developed physics-informed neural network (PINN) has achieved success in many science and engineering disciplines by encoding physics laws into the loss functions of the neural network such that the network not only conforms to the measurements and initial and boundary conditions but also satisfies the governing equations. This work first investigates the performance of the PINN in solving stiff chemical kinetic problems with governing equations of stiff ordinary differential equations (ODEs). The results elucidate the challenges of utilizing the PINN in stiff ODE systems. Consequently, we employ quasi-steady-state assumption (QSSA) to reduce the stiffness of the ODE systems, and the PINN then can be successfully applied to the converted non-/mild-stiff systems. Therefore, the results suggest that stiffness could be the major reason for the failure of the regular PINN in the studied stiff chemical kinetic systems. The developed stiff-PINN approach that utilizes QSSA to enable the PINN to solve stiff chemical kinetics shall open the possibility of applying the PINN to various reaction-diffusion systems involving stiff dynamics.
RESUMO
This work addresses fundamental issues related to the structure and conditioning of linear time-delayed models of non-linear dynamics on an attractor. While this approach has been well-studied in the asymptotic sense (e.g., for an infinite number of delays), the non-asymptotic setting is not well-understood. First, we show that the minimal time-delays required for perfect signal recovery are solely determined by the sparsity in the Fourier spectrum for scalar systems. For the vector case, we provide a rank test and a geometric interpretation for the necessary and sufficient conditions for the existence of an accurate linear time delayed model. Furthermore, we prove that the output controllability index of a linear system induced by the Fourier spectrum serves as a tight upper bound on the minimal number of time delays required. An explicit expression for the exact linear model in the spectral domain is also provided. From a numerical perspective, the effect of the sampling rate and the number of time delays on numerical conditioning is examined. An upper bound on the condition number is derived, with the implication that conditioning can be improved with additional time delays and/or decreasing sampling rates. Moreover, it is explicitly shown that the underlying dynamics can be accurately recovered using only a partial period of the attractor. Our analysis is first validated in simple periodic and quasiperiodic systems, and sensitivity to noise is also investigated. Finally, issues and practical strategies of choosing time delays in large-scale chaotic systems are discussed and demonstrated on 3D turbulent Rayleigh-Bénard convection.
RESUMO
With the goal of supporting close-range observation tasks of a spherical amphibious robot, such as ecological observations and intelligent surveillance, a moving target detection and tracking system was designed and implemented in this study. Given the restrictions presented by the amphibious environment and the small-sized spherical amphibious robot, an industrial camera and vision algorithms using adaptive appearance models were adopted to construct the proposed system. To handle the problem of light scattering and absorption in the underwater environment, the multi-scale retinex with color restoration algorithm was used for image enhancement. Given the environmental disturbances in practical amphibious scenarios, the Gaussian mixture model was used to detect moving targets entering the field of view of the robot. A fast compressive tracker with a Kalman prediction mechanism was used to track the specified target. Considering the limited load space and the unique mechanical structure of the robot, the proposed vision system was fabricated with a low power system-on-chip using an asymmetric and heterogeneous computing architecture. Experimental results confirmed the validity and high efficiency of the proposed system. The design presented in this paper is able to meet future demands of spherical amphibious robots in biological monitoring and multi-robot cooperation.
RESUMO
A visual tracking system is essential as a basis for visual servoing, autonomous navigation, path planning, robot-human interaction and other robotic functions. To execute various tasks in diverse and ever-changing environments, a mobile robot requires high levels of robustness, precision, environmental adaptability and real-time performance of the visual tracking system. In keeping with the application characteristics of our amphibious spherical robot, which was proposed for flexible and economical underwater exploration in 2012, an improved RGB-D visual tracking algorithm is proposed and implemented. Given the limited power source and computational capabilities of mobile robots, compressive tracking (CT), which is the effective and efficient algorithm that was proposed in 2012, was selected as the basis of the proposed algorithm to process colour images. A Kalman filter with a second-order motion model was implemented to predict the state of the target and select candidate patches or samples for the CT tracker. In addition, a variance ratio features shift (VR-V) tracker with a Kalman estimation mechanism was used to process depth images. Using a feedback strategy, the depth tracking results were used to assist the CT tracker in updating classifier parameters at an adaptive rate. In this way, most of the deficiencies of CT, including drift and poor robustness to occlusion and high-speed target motion, were partly solved. To evaluate the proposed algorithm, a Microsoft Kinect sensor, which combines colour and infrared depth cameras, was adopted for use in a prototype of the robotic tracking system. The experimental results with various image sequences demonstrated the effectiveness, robustness and real-time performance of the tracking system.
Assuntos
Algoritmos , Inteligência Artificial , RobóticaRESUMO
A new and general method to produce flexible, wearable dye-sensitized solar cell (DSC) textiles by the stacking of two textile electrodes has been developed. A metal-textile electrode that was made from micrometer-sized metal wires was used as a working electrode, while the textile counter electrode was woven from highly aligned carbon nanotube fibers with high mechanical strengths and electrical conductivities. The resulting DSC textile exhibited a high energy conversion efficiency that was well maintained under bending. Compared with the woven DSC textiles that are based on wire-shaped devices, this stacked DSC textile unexpectedly exhibited a unique deformation from a rectangle to a parallelogram, which is highly desired in portable electronics. This lightweight and wearable stacked DSC textile is superior to conventional planar DSCs because the energy conversion efficiency of the stacked DSC textile was independent of the angle of incident light.
RESUMO
An all-solid-state, lightweight, flexible, and wearable polymer solar cell (PSC) textile with reasonable photovoltaic performance has been developed. A metal textile electrode made from micrometer-sized metal wires is used as the cathode, and the surfaces of the metal wires are dip-coated with the photoactive layers. Two ultrathin, transparent, and aligned carbon nanotube sheets that exhibit remarkable electronic and mechanical properties were coated onto the modified metal textile at both sides as the anode to produce the desired PSC textile. Because of the designed sandwich structure, the PSC textile displays the same energy conversion efficiencies regardless of which side it is irradiated from. As expected, the PSC textiles are highly flexible, and their energy conversion efficiencies varied by less than 3% after bending for more than 200â cycles. The PSC textile shows an areal density (5.9â mg cm(-2)) that is lower than that of flexible film-based PSCs (31.3â mg cm(-2)).
RESUMO
Fiber electronics with flexible and weavable features can be easily integrated into textiles for wearable applications. However, due to small sizes and curved surfaces of fiber materials, it remains challenging to load robust active layers, thus hindering production of high-sensitivity fiber strain sensors. Herein, functional sensing materials are firmly anchored on the fiber surface in-situ through a hydrolytic condensation process. The anchoring sensing layer with robust interfacial adhesion is ultra-mechanically sensitive, which significantly improves the sensitivity of strain sensors due to the easy generation of microcracks during stretching. The resulting stretchable fiber sensors simultaneously possess an ultra-low strain detection limit of 0.05%, a high stretchability of 100%, and a high gauge factor of 433.6, giving 254-folds enhancement in sensitivity. Additionally, these fiber sensors are soft and lightweight, enabling them to be attached onto skin or woven into clothes for recording physiological signals, e.g. pulse wave velocity has been effectively obtained by them. As a demonstration, a fiber sensor-based wearable smart healthcare system is designed to monitor and transmit health status for timely intervention. This work presents an effective strategy for developing high-performance fiber strain sensors as well as other stretchable electronic devices.
RESUMO
Endowing flexible and adaptable fiber devices with light-emitting capabilities has the potential to revolutionize the current design philosophy of intelligent, wearable interactive devices. However, significant challenges remain in developing fiber devices when it comes to achieving uniform and customizable light effects while utilizing lightweight hardware. Here, we introduce a mass-produced, wearable, and interactive photochromic fiber that provides uniform multicolored light control. We designed independent waveguides inside the fiber to maintain total internal reflection of light as it traverses the fiber. The impact of excessive light leakage on the overall illuminance can be reduced by utilizing the saturable absorption effect of fluorescent materials to ensure light emission uniformity along the transmission direction. In addition, we coupled various fluorescent composite materials inside the fiber to achieve artificially controllable spectral radiation of multiple color systems in a single fiber. We prepared fibers on mass-produced kilometer-long using the thermal drawing method. The fibers can be directly integrated into daily wearable devices or clothing in various patterns and combined with other signal input components to control and display patterns as needed. This work provides a new perspective and inspiration to the existing field of fiber display interaction, paving the way for future human-machine integration.
RESUMO
An organic thiolate/disulfide redox couple with low absorption in the visible region was developed for use in fabricating novel dye-sensitized photovoltaic wires with an aligned carbon nanotube (CNT) fiber as the counter electrode. These flexible wire devices achieved a maximal energy conversion efficiency of 7.33%, much higher than the value of 5.97% for the conventional I(-)/I3(-) redox couple. In addition, the aligned CNT fiber also greatly outperforms the conventional Pt counter electrode with a maximal efficiency of 2.06% based on the thiolate/disulfide redox couple.
RESUMO
In the crystal structure of the title compound, C(33)H(39)N(3)O(10)·C(3)H(6)O, the acetone mol-ecule is encapsulated into the cavity of the cryptand and fixed by two N-Hâ¯O and one C-Hâ¯O hydrogen bond. C-Hâ¯O and C-Hâ¯N inter-actions link neighbouring cryptands. The dihedral angles between the pyridine ring and the benzene rings are 86.47â (17) and 85.53â (13)°.
RESUMO
Abstract: In the recent COVID-19 pandemic, World Health Organization emphasized that early detection is an effective strategy to reduce the spread of SARS-CoV-2 viruses. Several diagnostic methods, such as reverse transcription-polymerase chain reaction (RT-PCR) and lateral flow immunoassay (LFIA), have been applied based on the mechanism of specific recognition and binding of the probes to viruses or viral antigens. Although the remarkable progress, these methods still suffer from inadequate cellular materials or errors in the detection and sampling procedure of nasopharyngeal/oropharyngeal swab collection. Therefore, developing accurate, ultrafast, and visualized detection calls for more advanced materials and technology urgently to fight against the epidemic. In this review, we first summarize the current methodologies for SARS-CoV-2 diagnosis. Then, recent representative examples are introduced based on various output signals (e.g., colorimetric, fluorometric, electronic, acoustic). Finally, we discuss the limitations of the methods and provide our perspectives on priorities for future test development.
RESUMO
Two novel cryptand-based [2]rotaxanes were synthesized by a facile one-pot reaction from three neutral precursors: easily accessible cryptand host 1 and commercially available 4,4'-bipyridine and 3,5-di-tert-butylbenzyl bromide. Their structures were confirmed by (1)H NMR, 2D NMR, HRMS and X-ray analysis. Moreover, two [2]pseudorotaxanes based on the same cryptand hosts and dibenzyl viologen guest 3 were also demonstrated both in solution and in the solid state, which are different from previously reported [3]pseudorotaxane-like complexes formed by dimethyl viologen guest 2 and the cryptands.
RESUMO
The mol-ecule of the title compound {systematic name: 17,35-bis-[(2-propyn-1-yl-oxy)meth-yl]-2,5,8,11,14,20,23,26,29,32-deca-oxatricyclo-[31.3.1.1(15,19)]octa-triaconta-1(37),15,17,19â (38),33,35-hex-a--ene}, C(36)H(48)O(12), has crystallographic inversion symmetry and adopts a chair-like conformation. The polyether bridges of the macrocycle adopt gauche conformations and the cavity of the macrocycle is collapsed. In the crystal structure, there are weak inter-molecular C-Hâ¯O hydrogen bonds driven in part by the elevated acidity of acetylenyl H atoms.
RESUMO
Skin is the largest organ, with the functionalities of protection, regulation, and sensation. The emulation of human skin via flexible and stretchable electronics gives rise to electronic skin (e-skin), which has realized artificial sensation and other functions that cannot be achieved by conventional electronics. To date, tremendous progress has been made in data acquisition and transmission for e-skin systems, while the implementation of perception within systems, that is, sensory data processing, is still in its infancy. Integrating the perception functionality into a flexible and stretchable sensing system, namely artificial skin perception, is critical to endow current e-skin systems with higher intelligence. Here, recent progress in the design and fabrication of artificial skin perception devices and systems is summarized, and challenges and prospects are discussed. The strategies for implementing artificial skin perception utilize either conventional silicon-based circuits or novel flexible computing devices such as memristive devices and synaptic transistors, which enable artificial skin to surpass human skin, with a distributed, low-latency, and energy-efficient information-processing ability. In future, artificial skin perception would be a new enabling technology to construct next-generation intelligent electronic devices and systems for advanced applications, such as robotic surgery, rehabilitation, and prosthetics.
Assuntos
Pele Artificial , Técnicas Biossensoriais , Humanos , SilícioRESUMO
Microwave-invisible devices are emerging as a valuable technology in various applications, including soft robotics, shape-morphing structures, and textural camouflages, especially in electronic countermeasures. Unfortunately, conventional microwave-absorbing metastructures and bulk absorbers are stretching confined, limiting their application in deformable or special-shaped targets. To overcome such limitations, a conceptually novel soft-rigid-connection strategy, inspired by the pangolin, is proposed. Pangolin-inspired metascale (PIMS), which is a kind of stretchable metamaterial consisting of an electromagnetic dissipative scale (EMD-scale) and elastomer, is rationally designed. Such a device exhibits robust microwave-absorbing capacity under the interference of 50% stretching. Besides, profiting from the covering effect and size-confined effect of EMD-scale, the out-of-plane indentation failure force of PIMS is at least 5 times larger than conventional device. As a proof of concept, the proposed device is conformally pasted on nondevelopable surfaces. For a spherical dome surface, the maximum radar cross-section (RCS) reduction of PIMS is 6.3 dB larger than that of a conventional device, while for a saddle surface, the bandwidth of 10 dB RCS reduction exhibits an increase of 83%. In short, this work provides a conceptually novel platform to develop stretchable, nondevelopable surface conformable functional devices.
RESUMO
Bacterial infections remain a leading threat to global health because of the misuse of antibiotics and the rise in drug-resistant pathogens. Although several strategies such as photothermal therapy and magneto-thermal therapy can suppress bacterial infections, excessive heat often damages host cells and lengthens the healing time. Here, a localized thermal managing strategy, thermal-disrupting interface induced mitigation (TRIM), is reported, to minimize intercellular cohesion loss for accurate antibacterial therapy. The TRIM dressing film is composed of alternative microscale arrangement of heat-responsive hydrogel regions and mechanical support regions, which enables the surface microtopography to have a significant effect on disrupting bacterial colonization upon infrared irradiation. The regulation of the interfacial contact to the attached skin confines the produced heat and minimizes the risk of skin damage during thermoablation. Quantitative mechanobiology studies demonstrate the TRIM dressing film with a critical dimension for surface features plays a critical role in maintaining intercellular cohesion of the epidermis during photothermal therapy. Finally, endowing wound dressing with the TRIM effect via in vivo studies in S. aureus infected mice demonstrates a promising strategy for mitigating the side effects of photothermal therapy against a wide spectrum of bacterial infections, promoting future biointerface design for antibacterial therapy.
Assuntos
Antibacterianos/química , Fototerapia , Infecções Estafilocócicas/terapia , Resinas Acrílicas/química , Animais , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Bandagens , Ouro/química , Bactérias Gram-Negativas/efeitos dos fármacos , Bactérias Gram-Negativas/efeitos da radiação , Bactérias Gram-Positivas/efeitos dos fármacos , Bactérias Gram-Positivas/efeitos da radiação , Hidrogéis/química , Raios Infravermelhos/uso terapêutico , Nanopartículas Metálicas/química , Camundongos , Infecções Estafilocócicas/patologia , Infecções Estafilocócicas/veterináriaRESUMO
Stretchable strain sensors have aroused great interest for their application in human activity recognition, health monitoring, and soft robotics. For various scenarios involving the application of different strain ranges, specific sensitivities need to be developed, due to a trade-off between sensor sensitivity and stretchability. Traditional stretchable strain sensors are developed based on conductive sensing materials and still lack the function of customizable sensitivity. A novel strategy of mechanocombinatorics is proposed to screen the sensor sensitivity based on mechanically heterogeneous substrates. Strain redistribution over substrates is optimized by mechanics and structure parameters, which gives rise to customizable sensitivity. As a proof of concept, a local illumination method is used to fabricate heterogeneous substrates with customizable mechanics and structure parameters. A library of mechanocombinatorial strain sensors is created for extracting the specific sensitivity. Thus, not only is an effective strategy for screening of sensor sensitivity demonstrated, but a contribution to the mechanocombinatorial strategy for personalized stretchable electronics is also made.
RESUMO
Although some progress has been made on stretchable supercapacitors, traditional stretchable supercapacitors fabricated by predesigning structured electrodes for device assembling still lack the device-level editability and programmability. To adapt to wearable electronics with arbitrary configurations, it is highly desirable to develop editable supercapacitors that can be directly transferred into desirable shapes and stretchability. In this work, editable supercapacitors for customizable shapes and stretchability using electrodes based on mechanically strengthened ultralong MnO2 nanowire composites are developed. A supercapacitor edited with honeycomb-like structure shows a specific capacitance of 227.2 mF cm-2 and can be stretched up to 500% without degradation of electrochemical performance, which is superior to most of the state-of-the-art stretchable supercapacitors. In addition, it maintains nearly 98% of the initial capacitance after 10 000 stretch-and-release cycles under 400% tensile strain. As a representative of concept for system integration, the editable supercapacitors are integrated with a strain sensor, and the system exhibits a stable sensing performance even under arm swing. Being highly stretchable, easily programmable, as well as connectable in series and parallel, an editable supercapacitor with customizable stretchability is promising to produce stylish energy storage devices to power various portable, stretchable, and wearable devices.
RESUMO
Sensory neurons within skin form an interface between the external physical reality and the inner tactile perception. This interface enables sensory information to be organized identified, and interpreted through perceptual learning-the process whereby the sensing abilities improve through experience. Here, an artificial sensory neuron that can integrate and differentiate the spatiotemporal features of touched patterns for recognition is shown. The system comprises sensing, transmitting, and processing components that are parallel to those found in a sensory neuron. A resistive pressure sensor converts pressure stimuli into electric signals, which are transmitted to a synaptic transistor through interfacial ionic/electronic coupling via a soft ionic conductor. Furthermore, the recognition error rate can be dramatically decreased from 44% to 0.4% by integrating with the machine learning method. This work represents a step toward the design and use of neuromorphic electronic skin with artificial intelligence for robotics and prosthetics.