Porous hydroxyapatite granules for alloplastic enhancement of the facial region.

Hydroxyapatite is a biocompatible alloplast with the same chemical composition as bone. It is readily incorporated into host bone, does not undergo appreciable resorption, does not incite a clinically significant foreign body reaction, and resists infection. This article describes forms of hydroxyapatite, procedures for use, and clinical examples.

Relevance of the lesser occipital nerve in facial rejuvenation surgery.

Nerve injuries are possible during facial rejuvenation surgery. The great auricular nerve has been studied; however, little is known about the lesser occipital nerve and its relevance in facial rejuvenation surgery. To understand the importance of the lesser occipital nerve in a face lift procedure, the specific anatomy of the nerve was studied in the laboratory in 19 hemifaces, with additional nerve observations in the operating room. The course of the lesser occipital nerve, its branches, and the relationship with the surrounding structures were evaluated and recorded. The great auricular nerve was also dissected to compare the two nerve territories. In the majority of the dissections, the lesser occipital nerve supplied the superior ear and the mastoid area, whereas the great auricular nerve innervated the inferior ear and a portion of the preauricular area. The nerves, however, were variable in size and distribution. Five lesser occipital nerves provided the dominant supply to the ear, compensating for a small great auricular nerve contribution. Therefore, injury to the lesser occipital nerve can result in a major sensory deficit of the ear. We also found the lesser occipital nerve to have a subcutaneous course at a proximal and variable level. These nerve branches can be superficial, and therefore postauricular flap dissection can injure the nerve if the flap is dissected at the fascial level. We therefore suggest that the dissection be at a more superficial level to avoid nerve injury. And finally, if SMAS/platysma suspension sutures are placed, we suggest these be done in a vertical-oblique direction along the course of the lesser occipital nerve, because this should minimize the possibility of trapping terminal branches.

Osteochondral reconstruction of a non-weight-bearing joint using a high-density porous polyethylene implant.

Currently, there is no reliable reconstructive modality allowing anatomic resurfacing of traumatic digital osteochondral articular defects. The purpose of the present study is to demonstrate the utility of Medpor, a high-density porous polyethylene (HDPP) scaffold biomaterial that can (1) be readily contoured to fit any joint defect, (2) permit stable internal fixation, and (3) permit osteocyte and chondrocyte ingrowth and subsequent articular cartilage resurfacing necessary to restore joint congruity. HDPP has gained wide acceptance for use in craniofacial and skeletal reconstruction and augmentation. An avian non-weight-bearing joint model was designed to study the role of the HDPP implant in small joint reconstruction. An osteochondral defect was created with a 5-mm circular punch in the humeral articular surface of both glenohumeral joints of 32 adult White Leghorn chickens. In each animal, one defect was press-fitted with a correspondingly sized HDPP implant (HDPP implant group); the contralateral defect was filled with the original osteochondral plug (isograft group) or left unrepaired (control group). At 2 weeks, and 1, 3, and 6 months,joints from each group were harvested and evaluated. Over the 6-month study period, joints in the control group demonstrated healing with dense collagenous scar tissue leaving residual defects at the articular surfaces and significant degenerative disease of the glenohumeral joints radiographically. Joints in the isograft group demonstrated near-complete resorption with some preservation of the cartilaginous cap but overall depression of the articular surface and significant degenerative joint disease. Joints in the HDPP implant group demonstrated stable fixation by highly mineralized bony trabecular ingrowth, preservation of the articular contour of the humeral head, and no evidence of significant degenerative joint disease. These findings indicate a potential role for this high-density porous polyethylene implant in the reconstruction of small joint articular and osseous defects.

The fetal cleft palate: I. Characterization of a congenital model.

Any animal model of a human congenital anomaly established by iatrogenic methods involving intrauterine fetal manipulation has limited clinical applicability. A congenital model that more closely simulates the etiopathogenesis of a human anomaly may provide data that can more readily be extrapolated to that anomaly and, therefore, be used in diagnostic and management strategies. The present work provides a description and characterization of a congenital model of cleft palate in the goat. Palatal shelf closure normally occurs at approximately day 38 of gestation in the caprine species. Sixteen pregnant goats were gavaged twice daily during gestational days 32 through 41 [term, 145 days] with a plant slurry of Nicotiana glauca containing the piperidine alkaloid teratogen anabasine. Gross analysis and measurement of fetal clefts were performed at 60, 70, and 85 days gestation (four fetuses were studied at each time point). Seventeen clefted kids were sacrificed at specific intervals after birth (2 weeks, and 1, 3, and 6 months); after skull debridement and preparation, they were compared with 12 unclefted control kids. Complete clefting of the secondary palate occurred in 97 percent of the fetuses. In all cases, the cleft extended from the posterior aspect of the alveolar ridge to the uvula; the majority of these clefts were bilateral, with complete detachment of the vomer. Morphologically, these clefts were similar to human clefts. Eighteen percent of clefted newborn kids demonstrated gross maxillary hypoplasia and midfacial retrusion at birth with a relative Class III malocclusion. Direct measurement of the congenital caprine skulls confirmed these findings. The incidence of midfacial growth abnormalities in these clefted animals raises questions regarding the etiopathogenesis of facial dysmorphology that is unrelated to scarring of the maxilla. This congenital cleft palate model is currently being used to explore these questions and others related to craniofacial growth and palatal function after in utero repair.

The fetal cleft palate: II. Scarless healing after in utero repair of a congenital model.

The role of fetal surgery in the treatment of non-life-threatening congenital anomalies remains a source of much debate. Before such undertakings can be justified, models must be established that closely resemble the respective human anomalies, and the feasibility and safety of these in utero procedures must be demonstrated. The authors recently described and characterized a congenital model of cleft palate in the goat. The present work demonstrates the methodology they developed to successfully repair these congenital cleft palates in utero, and it shows palatal healing and development after repair. A surgically created cleft model was developed for comparative purposes. Palatal shelf closure normally occurs at approximately day 38 of gestation in the caprine species. Six pregnant goats were gavaged twice daily during gestational days 32 to 41 (term, 145 days) with a plant slurry of Nicotiana glauca containing the piperidine alkaloid anabasine; the 12 fetuses had complete congenital clefts of the secondary palate. Repair of the congenital clefts was performed at 85 days of gestation using a modified von Langenbeck technique employing lateral relaxing incisions with elevation and midline approximation of full-thickness, bilateral, mucoperiosteal palatal flaps followed by single-layer closure. Six congenitally clefted fetuses underwent in utero repair, six remained as unrepaired controls. Twelve normal fetuses underwent surgical cleft creation by excision of a 20 x 3 mm full-thickness midline section of the secondary palate extending from the alveolus to the uvula, at 85 days of gestation. Six surgically clefted fetuses underwent concurrent repair of the cleft at that time; six clefted fetuses remained as unrepaired controls. At 2 weeks of age, no congenitally or surgically created clefts repaired in utero demonstrated gross or histologic evidence of scar formation. A slight indentation at the site of repair was the only remaining evidence of a cleft. At 6 months of age, normal palatal architecture, including that of mucosal, muscular, and glandular elements, was seen grossly and histologically. Cross-section through the mid-portion of the repaired congenitally clefted palates demonstrated reconstitution of a bilaminar palate, with distinct oral and nasal mucosal layers, after single-layer repair. In utero cleft palate repair is technically feasible and results in scarless healing of the mucoperiosteum and velum. The present work represents the first in utero repair of a congenital cleft palate model in any species. The use of a congenital cleft palate model that can be consistently reproduced with high predictability and little variation represents the ideal experimental situation. It provides an opportunity to manipulate specific variables, assess the influence of each change on the outcome and, subsequently, extrapolate such findings to the clinical arena with a greater degree of relevance.

An alternative procedure for ESR identification of irradiated chicken drumsticks.

The ESR spectroscopy is, at present, the most established technique for quantitative analysis of irradiated chicken bone using the additive dose method. In this paper we tried a different approach to the problem analyzing the ESR behavior of a batch of chicken bone samples coming randomly from the market. Using a suitable and standardized sample preparation technique and sample positioning in the microwave cavity, we obtained a coefficient of variation of about 30% for the batch response. The calibration curve, obtained using the batch behavior up to 10 kGy, was used for a quantitative test on unknown samples.

Criticality accident dosimetry with ESR spectroscopy.

The suitability of the ESR alanine and sugar detectors for criticality accident dosimetry was experimentally investigated during an intercomparison of dosimetry techniques. Tests were performed irradiating detectors both free-in-air and on-phantom during controlled critcality excursions at the SILENE reactor in Valduc, France. Several grays of absorbed dose were imparted in neutron gamma-ray fields of various relative intensities and spectral distributions. Analysed results confirmed the potential of these systems which can immediately provide an acute dose assessment with an average underestimate of 30%in the various fields. This performance allows for the screening of severely exposed individuals and meets the IAEA recommendations on the early estimate of accident absorbed doses.

Influencing factors on ESR bone dosimetry.

This paper reports on the influence that temperature during irradiation and dose-rate have on the radiation-induced free-radical yield and time stability in non de-proteinized bone. Bone from chicken legs was irradiated in the 253-293 K temperature range and with two different sources (60Co, 0.6 Gy/s and 12 MeV electrons, 6 x 10(6) Gy/s). Temperature influences type and number of radicals, while radical concentration seems to slightly decrease with dose rate.

[Comparative calibration of dosimetry methods used around industrial irradiation plants in Italy]. / Intercalibrazione dei metodi dosimetrici utilizzati presso gli impianti di irraggiamento industriale in Italia.

Industrial application of ionizing radiation (sterilization of medical supplies, long lasting food preservation, etc.) is a well established technique all over the world. The efficacy of the treatment depends on an accurate dosimetry assuring both the achievement of irradiation purposes at the lowest cost and the safety of consumers. This is why in 1986 the Istituto Superiore di Sanità (ISS) started an intercomparison program among the industrial plants now working in Italy, aimed to optimize the used dosimetric procedures. The electron spin resonance (ESR) alanine-based dosimetry, set up at ISS, was chosen as reference dosimetry. Each plant received 30 dosimeters to be irradiated in prefixed conditions in order to: a) compare the ESR and the routine dosimetry; b) evaluate the homogeneity factor in the irradiated product; c) test the reproducibility of the irradiation technique. Results support the need of standardized dosimetric procedures for an optimization of the radiation treatment.