Evaluation on the Sex-Specific Association Between Cigarette Smoke Exposure and Inflammation Markers-C-Reactive Protein and White Blood Cell Count.

INTRODUCTION: Cigarette smoke increases peripheral white blood cell (WBC) count. However, the dose-dependent association between smoking and C-reactive protein (CRP), an important inflammatory marker, has been reported as inconsistent. AIMS AND METHODS: Here, we evaluated the associations between smoking and CRP using both smoking questionnaires and urine cotinine as exposure markers. The Korea National Health and Nutrition Examination Survey data were used for analyzing the associations. Multiple regression analyses were performed to examine the associations between cigarette smoke exposure, as assessed by questionnaires and urine cotinine, and health effects, as measured by CRP and WBC count, controlling for potential confounders. The confounders, including age, sex, body mass index, blood pressure, cholesterol, glucose, alanine aminotransferase, and uric acid, were selected a priori based on the literature. RESULTS: A total of 11 435 participants were included for analysis. For the exposure-response relationship, the results indicated a significant increase in CRP levels in male smokers compared to male nonsmokers (p = .002), whereas no significant increase was found in female smokers compared to female nonsmokers (p = .680). For the dose-response relationship, a significant positive association was observed between urine cotinine and CRP in male smokers (p = .018), whereas no significant association was found in female smokers (p = .508). WBC count consistently showed significant exposure-response and dose-response relationships in both sexes. CONCLUSIONS: WBC count was found to be a consistent effect marker of cigarette smoke exposure, while the association between CRP level and smoking was inconsistent and varied by sex. The sex-specific response to cigarette smoke exposure warrants further exploration in future studies. IMPLICATIONS: Cigarette smoke exposure is known to increase inflammation and has been thought to increase CRP, a significant inflammation marker. However, recent studies have reported conflicting results regarding the dose-dependent association between cigarette smoke exposure and CRP. This study found that the association between smoking and CRP is inconsistent and varies by sex, showing significant exposure response in men but not in women. Furthermore, the study suggests that WBC count is a more consistent marker for cigarette smoke exposure.

Lessons From the Household Humidifier Disinfectant Tragedy (HHDT) With Focus on the Chemical Poisoning Surveillance System: Review and Recommendation.

BACKGROUND: Lessons learned from the Household Humidifier Disinfectant Tragedy (HHDT) in Korea, which poisoned thousands of citizens over a period of years, necessitated an examination of national poison prevention and surveillance systems. The objectives of this study are to identify essential changes needed in chemical poisoning prevention regulations and surveillance systems for effective poison control by comparing recent trends in international poison control center (PCC) operations, and to delineate the critical elements for establishing a state-of-the-art poison control surveillance system in Korea based on recent advances in PCCs with toxicovigilance. METHODS: A comprehensive review of Korea's regulatory and surveillance systems for chemical health hazards, with a focus on household products under the HHDT, was conducted. A review of toxicovigilance systems in major countries shows that creating an effective national PCC requires key elements: a centralized database of toxic substances and poisoning cases, mandatory or voluntary reporting of poisoning cases, real-time alerts, collaboration among health organizations, and targeted follow-up of poisoned individuals. RESULTS: Significant deficiencies in Korea's legislation, toxicological data management, and poisoning surveillance systems, explained the inadequate response of the Korean government to the HHDT for nearly 17 years until the end of 2011. Based on a review of PCC toxicovigilance systems in major countries, a national framework with five core components is recommended for establishing a modern comprehensive Korea PCC system with toxicovigilance capacity. The core components include establishment of a centralized database of toxic substances information and clinical poisoning cases, implementation of mandatory or permissive reporting of poisoning cases, real-time alert mechanisms, collaborative systems among health-related organizations, and clinical follow-up of poisoned sub-groups. CONCLUSION: A rationale and framework for a state-of-the-art national Korean PCC with toxicovigilance is justified and offered. This proposed system could assist neighboring countries in establishing their own sophisticated, globally integrated PCC networks.

Evaluation of Temporal Trends of Lead Exposure in Korean Workers Using Workplace Monitoring Data.

BACKGROUND: Lead, which is widely used in various industrial settings, is a major health hazard for manufacturing workers. Therefore, control of lead exposure has been implemented in an effort to prevent lead-related health problems. In this study, our aim was to evaluate temporal trends in occupational lead exposure in Korean lead workers using data from monitoring of workplace exposure. METHODS: A nationwide work environment monitoring database, data from a work environment monitoring institution, and data extracted from a review paper were utilized. Different versions of standard industrial classification codes were aligned with the 10th Korean Standard Industrial Classification, which is generally consistent with the 4th revision of the International Standard Industrial Classification. The multiple data sources were combined and temporal trends over the period from 1994-2021 were estimated. In addition, separate estimation of temporal trends in the storage battery manufacturing industry over the period from 1987-2021 was also performed. RESULTS: A total of 444,296 personal airborne lead measurements were used for the estimation process. The temporal trends in occupational exposure to lead declined by -6% annually over the study period. In particular, levels of lead exposure in the storage battery manufacturing industry showed a steeper decline of -12% annually. CONCLUSIONS: Findings of our study showed that occupational exposure to lead declined over the period from 1994 to 2021 in Korea. However, adverse effects of exposure to lead on health should be regarded with caution. The results will be useful in conduct of epidemiological studies examining lead-related effects on health.

Review of Inhalation Health Risks Involving Chloromethylisothiazolinone (CMIT) and Methylisothiazolinone (MIT) Used as Disinfectants in Household Humidifiers.

The association between lung injury and exposure to humidifier disinfectant (HD) containing a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) has been controversial in South Korea. This study conducts a literature review in order to evaluate the likelihood of CMIT/MIT reaching the lower part of the respiratory tract and causing lung injury. A literature review focused on the inhalation risk of HD containing a mixture of CMIT and MIT. The major contents included the physicochemical properties of CMIT and MIT contained in HDs and methodological reviews on substance analysis, toxicity tests and clinical cases. HD products marketed in South Korea have been reported to contain approximately 1-2% CMIT and 0.2-0.6% MIT along with magnesium nitrate (20-25%), magnesium chloride (0.2-1.0%), and water (70-75%). The types of CMIT and MIT dispersed into the air and deposited in the respiratory tract are assumed to be either gaseous substances or nanoparticles mixed with magnesium salts. The result of the literature review including clinical cases of lung injury among CMIT/MIT HD product users, demonstrated that these chemicals likely reach the lower respiratory tract and accordingly cause lung injury. A number of humidifier disinfectant-associated lung injury cases with clinical evidence should be prioritized in risk assessment of HD containing CMIT and MIT, even though there might be insufficient evidence in all related areas, including inhalation exposure assessment studies, animal testing, and epidemiological studies.

Vehicle Load Estimation Using the Reaction Force of a Vertical Displacement Sensor Based on Fiber Bragg Grating.

Accurately calculating the vehicle load acting on a bridge at any one time is crucial to determining the integrity and safety of the bridge. To ensure this integrity and safety, information on the types, characteristics, and load of vehicles that regularly cross the bridge is very important in terms of its structural adequacy and maintenance. In this study, the vehicle load that a bridge will be subjected to was estimated using the reaction force response at the support. To estimate this response to the reaction force, a vertical displacement sensor, developed based on Fiber Bragg Grating (FBG), was applied to the Eradi Quake System (EQS), a commercially available bridge bearing. This vertical displacement sensor can measure the vertical load and has the advantage of being easy to attach and detach. To verify the performance and accuracy of this sensor, this study conducted numerical analysis and vehicle loading tests. It found that the vehicle load can be estimated from the reaction force response, as measured by the vertical displacement sensor on the bridge.

Characteristics of the Molecular Weight of Polyhexamethylene Guanidine (PHMG) Used as a Household Humidifier Disinfectant.

(1) Background: Household humidifier disinfectant (HD) brands containing polyhexamethylene guanidine (PHMG) have been found to cause the most HD-associated lung injuries (HDLIs) in the Republic of Korea. Nevertheless, no study has attempted to characterize the potential association of the health effects, including HDLI, with the physicochemical properties of PHMG dissolved in different HD brands. This study aimed to characterize the molecular weight (MW) distribution, the number-average molecular weight (Mn), the weight-average molecular weight (Mw), and the structural types of PHMG used in HD products. (2) Methods: Quantitative measurements were made using matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS). The Mn, Mw, and MW distributions were compared among various HD products. (3) Results: The mean Mn and Mw were 542.4 g/mol (range: 403.0-692.2 g/mol) and 560.7 g/mol (range: 424.0-714.70 g/mol), respectively. The degree of PHMG oligomerization ranged from 3 to 7. The MW distribution of PHMG indicated oligomeric compounds regardless of the HD brands. (4) Conclusions: Based on the molecular weight distribution, the average molecular weight of PHMG, and the degree of polymerization, the PHMG collected from HDLI victims could be regarded as an oligomer. PHMG, as used in household humidifiers, should not be exempted from toxic chemical registration as a polymer. Further study is necessary to examine the association of PHMG oligomeric compounds and respiratory health effects, including HDLI.

Physicochemical characteristics of colloidal nanomaterial suspensions and aerosolized particulates from nano-enabled consumer spray products.

Physicochemical properties between colloidal engineered nanomaterials (ENMs) and aerosols released from consumer spray products were characterized. A dynamic light scattering (DLS), transmission electron microscopy (TEM), and inductively coupled plasma mass spectrometer (ICP-MS) were used to evaluate the suspended ENMs in the products. Direct-reading instruments, TEM, and ICP-MS were used to characterize the properties of aerosolized ENMs. The aerosolized organic compounds with ENMs were assumed to be vaporized for a short time after spraying. The median diameter of ENMs in product solutions measured by DLS was about 200-350 nm, while individual particle was confirmed from 3 to 50 nm by TEM. The size of aerosolized ENMs was ranged from 7 to 44 nm, and their aggregates were about 100-1000 nm in near distance. Some inorganic substances including raw nanomaterials were also found in the aerosol. The particles released from the propellant sprays were identified in far distance, while they were not found in far distance when pump sprays were used. The number concentration from the propellant sprays increased up to 6000 particles/cm3 /g at near distance and dispersed to far distance, while the most of droplets emitted from pump sprays were settled down near sprayer's location. We found other metals besides labeled ENMs are included in each product and the characteristics of the particles are different when they are sprayed.

Non-Contact Water Level Response Measurement of a Tubular Level Gauge Using Image Signals.

The occurrence of excessive fluid sloshing during an earthquake can damage structures used to store fluids and can induce secondary disasters, such as environmental destruction and human casualties, due to discharge of the stored fluids. Thus, to prevent such disasters, it is important to accurately predict the sloshing behavior of liquid storage tanks. Tubular level gauges, which visually show the fluid level of a liquid storage tank, are easy to install and economical compared to other water level gauges. They directly show the fluid level and can be applied for various fluids because they can be constructed with various materials according to the fluid characteristics and the intended use. Therefore, in this study, the shaking table test was conducted to verify the validity of the method for measuring the water level response of the tubular level gauge installed on a liquid storage tank using image signals. In addition, image enhancement methods were applied to distinguish between the float installed in the tubular level gauge and the gray level of the background.

Properties of Polyhexamethylene Guanidine (PHMG) Associated with Fatal Lung Injury in Korea.

The use of humidifier disinfectant (HD) has been determined to be associated with lung injuries (HDLI) in Korea. Although HD brands containing polyhexamethylene guanidine (PHMG) oligomers have been found to cause more HDLI compared to brands containing other disinfectants, the physicochemical properties of PHMG have been poorly defined. We aimed to quantify the PHMG dissolved in HD brands, characterize the number-average (Mn) and weight-average (Mw) molecular masses, and identify the polymerization degree of PHMG. Analysis of the PHMG oligomers was performed using a matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI-TOF MS) operated in positive-ion reflectron mode. Eight brands of HD containing PHMG were identified. The PHMG concentrations in these brands ranged from 160 to 37,200 ppm (mean = 3100.9 ppm). Concentration was a significant variable among and within HD brands. The degree of PHMG oligomerization fell within the range of two to four. The averages of Mn and Mw were 517.2 g/mol (range: 422-613 g/mol) and 537.3 g/mol (range: 441.0-678.0 g/mol), respectively. Based on the average molecular weight and the degree of polymerization, the PHMG examined here could be regarded as oligomers, which may be associated with the highest proportion of HDLI being caused by PHMG.

Characteristics of Exposure to Chloromethylisothiazolinone (CMIT) and Methylisothiazolinone (MIT) among Humidifier Disinfectant-Associated Lung Injury (HDLI) Patients in South Korea.

This study aimed to quantify both chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) dissolved in different product brands and to characterize the exposure to these chemicals among humidifier disinfectant-associated lung injury (HDLI) patients. Both CMIT and MIT dissolved in different humidifier disinfectant (HD) products were quantified using gas chromatography-mass spectrometry. The inhalation level of CMIT and MIT was estimated based on HD-associated factors as reported by HDLI patients. A total of eleven HD products marketed until the end of 2011 were found to contain CMIT and/or MIT. The level of combined CMIT and/or MIT dissolved in these HD products ranged from 12 to 353 ppm. The level varied among HD products and the year of manufacture. The average inhalation levels were estimated to be 7.5, 4.1, and 3.2 µg/m3 for the definite, probable, and possible groups, respectively. If probable and possible groups were collapsed together, the inhalation level of the collapsed group was significantly different from that of the definite group (p < 0.001). All HDLI patients responded as having used HD not only while sleeping, but also as having a humidifier treated with HD within close proximity every day in insufficiently ventilated spaces. These HD use characteristics of patients may be directly/indirectly linked to the HDLI development.

Humidifier disinfectant and use characteristics associated with lung injury in Korea.

Since around the year 2000, hundreds of people in Korea have developed humidifier disinfectant-associated lung injury (HDLI). We collected all HD exposure-related information from the field investigations into the locations in which the 1199 registered patients had used HD. Among the people who registered, 38% (1st round = 214, 2nd = 73, 3rd = 166) were confirmed as HDLI patients. Children aged under eight years old made up the highest proportion of HDLI cases (N = 279, 62%), followed by pregnant women (N = 31, 7%). One hundred thirty-three (29%) of the confirmed HDLI patients died. Fifty-seven percent of HDLI patients (N = 259) developed HDLI after <1 year of HD use. The number of HDLI patients who used only the Oxy Saksak HD brand was found to be 176 (39%), followed by the brands Cefu (N = 27, 6%) and Aekyung (N = 22, 5%). HD products containing only polyhexamethylene guanidine phosphate (PHMG-P) were the most frequently used among HDLI patients (N = 234, 52%), followed by oligo (2-(2-ethoxy)ethoxyethyl) guanidinium (PGH) (N = 27, 6%) and a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) (N = 26, 6%). The average PHMG-P inhalation level estimated from the patient group classified as suffering lung injury definitely associated with HD use was 145.1 µg/m3 (N = 91, SD = 395.1 µg/m3 ), higher than levels estimated from both the probable and possible HDLI patient groups. In conclusion, HD exposure-related variables, including type of HD brand and estimated inhalation HD level, were associated with the risk of HDLI.

Characterization of Levels of Extremely Low Frequency Magnetic Fields Emitted From Portable Hand-Held Fans.

This study aims to assess the levels of extremely low frequency magnetic fields (ELF-MF) emitted from portable hand-held fans (HHFs) and their principal frequency and to identify factors influencing these levels. We collected a total of eleven models of HHF and monitored the ELF-MF as a function of fan speed and distance from the fan. EMDEX II was used to monitor the ELF-MF. An SMP2 EMF-meter equipped with a P400 field probe was used to determine the levels of ELF-MF and the frequency spectrum. Ten of the fans, excluding only one bladeless-fan model, emitted a high level of ELF-MF near the source of the HHF direct-current motor. The maximum measured level of ELF-MF ranged from 14.07 to 218.7 µT. All measurements of the ELF-MF taken within 10 cm from the HHFs showed values higher than 1.0 µT. ELF-MF levels were found to decrease markedly with distance, regardless of the HHF product. The level of ELF-MF rose noticeably with increased fan speed. The speed of and distance from the HHF significantly influenced the level of ELF-MF. All principal frequencies ranged from 1 to 300 Hz, which falls in the typical range of ELF. Bioelectromagnetics. 2019;40:569-577. © 2019 Bioelectromagnetics Society.

Early-life exposure to humidifier disinfectant determines the prognosis of lung function in children.

BACKGROUND: Use of humidifier disinfectants (HD) at home leads to chemical airborne exposure, causing HD associated lung injury (HDLI) with high mortality. However, the lung function in children diagnosed with HDLI is not well studied. We investigated the effect of HD exposure on lung function, prognosis, and exposure characteristics associated with the lung function phenotype in children. METHODS: Eighty-one children diagnosed with HDLI in a nationwide cohort were tested for spirometry and diffusing capacity of the lung for carbon monoxide (DLco) from July 2013 and followed up with at five time points over 2 years. The results were compared with 122 children without HD exposure as controls. Home investigation and questionnaire analysis were conducted to assess HD inhalation exposure. RESULTS: HDLI survivor's mean percent of predicted forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), and corrected DLco were significantly lower compared with the control group. On longitudinal assessment, FVC was within the normal range, but flattened, and spirometry showed a predominantly restrictive pattern. Corrected DLco did not normalize above 80% despite increasing age. The persistently low phenotype of lung function was associated with initial exposure age, especially less than 12 months of age. Higher density HD exposure during sleep and close distance between the bed and the humidifier were significantly associated with persistently low corrected DLco. CONCLUSIONS: HD exposure affects prolonged decrement in lung function, especially DLco, particularly among children who are exposed within the first year of life. These results suggested that early-life HD exposure determines long-term prognosis of lung function in children.

Estimates of the Prevalence, Intensity and the Number of Workers Exposed to Cigarette Smoking across Occupations and Industries in Korea.

BACKGROUND: Tobacco smoking affects the incidence of various illnesses such as lung cancer, respiratory diseases, and cardiovascular diseases. In an effort to prevent smoking-related cancers, we aimed to estimate the smoking prevalence, intensity, and number of workers exposed to smoking, which would be specific to the occupational and industrial circumstances in Korea. METHODS: We used the Korean Working Condition Survey (KWCS) and Korea's Census data. Smoking prevalence and intensity were estimated using the KWCS data. The number of smokers was estimated by multiplying smoking prevalence with the number of workers in the occupation or industry. Smoking prevalence, intensity, and number of smokers were estimated for major, sub-major, and minor groups of occupation and industry. RESULTS: Of the total labor force in 2010, 52.66% of men and 5.24% of women workers were estimated to be current smokers. Men workers smoked 15.42 cigarettes/day, and women workers 11.29 cigarettes/day. In terms of occupation, "craft and related trades workers" demonstrated the highest smoking prevalence (52.24%). "Managers" smoked the highest number of cigarettes (16.63 cigarettes/day) and "equipment, machine operating, and assembling workers" comprised the largest number of estimated smokers (1,368,726 workers). In terms of industry, "mining and quarrying" had the highest smoking prevalence (69.27%). Those in "construction" smoked the highest number of cigarettes (17.16 cigarettes/day) and those in "manufacturing" comprised the largest number of estimated smokers (1,629,893 workers). CONCLUSION: Our results may help in setting priorities for smoking prevention-related activities. In addition, these results can be used for epidemiological studies controlling for the effect of smoking by occupation or industry.

Spatial-Temporal Dispersion of Aerosolized Nanoparticles During the Use of Consumer Spray Products and Estimates of Inhalation Exposure.

We evaluated the spatial-temporal dispersion of airborne nanomaterials during the use of spray consumer products and estimated the level of consumer inhalation exposure. A total of eight spray products including five propellant and three pump types were selected to evaluate the dispersion of airborne nanoparticles across time and space in a cleanroom which could control the background particles. Four products were advertised to contain silver and one contained titanium nanoparticles, while three products were specified no ENM but as being manufactured through the use of nanotechnology. We used direct-reading instruments with a thermodesorber unit to measure the particles (number, mass, surface area), as well as filter sampling to examine physicochemical characteristics. Sampling was conducted simultaneously at each location (1 m, near-field; 2, 3 m, far-field) by distance from the source. We estimated the inhaled doses at the breathing zone, and the doses deposited in each part of the respiratory tract using the experimental data and mathematical models. Nanoparticles released from the propellant sprays persisted in the air and dispersed over a large distance due to their small size (1466-5565 particles/cm3). Conversely, the pump sprays produced larger droplets that settled out of the air relatively close to the source, so the concentration was similar to background level (<200 particles/cm3). The estimates of inhalation exposure also suggested that exposure to nanoparticles was greater with propellant sprays (1.2 × 108 ± 4.0 × 107 particles/kgbw/day) than pump sprays (2.7 × 107 ± 6.5 × 106 particles/kgbw/day). We concluded that the propellant sprays create a higher risk of exposure than the pump sprays.

Comparison of Grouping Schemes for Exposure to Total Dust in Cement Factories in Korea.

OBJECTIVE: The purpose of this study was to evaluate grouping schemes for exposure to total dust in cement industry workers using non-repeated measurement data. METHODS: In total, 2370 total dust measurements taken from nine Portland cement factories in 1995-2009 were analyzed. Various grouping schemes were generated based on work process, job, factory, or average exposure. To characterize variance components of each grouping scheme, we developed mixed-effects models with a B-spline time trend incorporated as fixed effects and a grouping variable incorporated as a random effect. Using the estimated variance components, elasticity was calculated. To compare the prediction performances of different grouping schemes, 10-fold cross-validation tests were conducted, and root mean squared errors and pooled correlation coefficients were calculated for each grouping scheme. RESULTS: The five exposure groups created a posteriori by ranking job and factory combinations according to average dust exposure showed the best prediction performance and highest elasticity among various grouping schemes. CONCLUSION: Our findings suggest a grouping method based on ranking of job, and factory combinations would be the optimal choice in this population. Our grouping method may aid exposure assessment efforts in similar occupational settings, minimizing the misclassification of exposures.

Exposure characteristics of familial cases of lung injury associated with the use of humidifier disinfectants.

BACKGROUND: This study describes 17 families with 38 lung injury patients (14 males, 24 females; 22 preschool-age children less than six years of age and 16 individuals of 13-50 years) who used disinfectant added to humidifiers in the home. METHODS: Clinical examination and humidifier disinfectant-use histories were taken, and a thorough home investigation was performed to assess exposure to humidifier disinfectant. RESULTS: Nine of the patients (three pregnant females, six preschool-age children) died soon after they first developed lung damage. Six (16%) were pregnant females and 22 (58%) were preschool-aged children younger than six years. The patients used humidifier disinfectant products containing either polyhexamethylene guanidine phosphate (PHMG, n = 36) or oligo(2-(2-ethoxy)ethoxyethyl guanidinium chloride (PGH, n = 2). Twenty-six patients (68%) used the brand "Oxy"®, which contains PHMG. Of the ten patients with fatal lung injury, nine were found to have used PHMG. CONCLUSIONS: Our findings suggest that the use of humidifier disinfectant products containing either PGH or PHMG can cause lung injury, especially in preschool-age children younger than six years and pregnant women.

Developing estimates of frequency and intensity of exposure to three types of metalworking fluids in a population-based case-control study of bladder cancer.

BACKGROUND: A systematic, transparent, and data-driven approach was developed to estimate frequency and intensity of exposure to straight, soluble, and synthetic/semi-synthetic metalworking fluids (MWFs) within a case-control study of bladder cancer in New England. METHODS: We assessed frequency using individual-level information from job-specific questionnaires wherever possible, then derived and applied job group-level patterns to likely exposed jobs with less information. Intensity estimates were calculated using a statistical model developed from measurements and determinants extracted from the published literature. RESULTS: For jobs with probabilities of exposure≥0.5, median frequencies were 8-10 hr/week, depending on MWF type. Median intensities for these jobs were 2.5, 2.1, and 1.0 mg/m3 for soluble, straight, and synthetic/semi-synthetic MWFs, respectively. CONCLUSIONS: Compared to case-by-case assessment, these data-driven decision rules are transparent and reproducible and may result in less biased estimates. These rules can also aid future exposure assessments of MWFs in population-based studies.

Estimation of the probability of exposure to machining fluids in a population-based case-control study.

We describe an approach for estimating the probability that study subjects were exposed to metalworking fluids (MWFs) in a population-based case-control study of bladder cancer. Study subject reports on the frequency of machining and use of specific MWFs (straight, soluble, and synthetic/semi-synthetic) were used to estimate exposure probability when available. Those reports also were used to develop estimates for job groups, which were then applied to jobs without MWF reports. Estimates using both cases and controls and controls only were developed. The prevalence of machining varied substantially across job groups (0.1->0.9%), with the greatest percentage of jobs that machined being reported by machinists and tool and die workers. Reports of straight and soluble MWF use were fairly consistent across job groups (generally 50-70%). Synthetic MWF use was lower (13-45%). There was little difference in reports by cases and controls vs. controls only. Approximately, 1% of the entire study population was assessed as definitely exposed to straight or soluble fluids in contrast to 0.2% definitely exposed to synthetic/semi-synthetics. A comparison between the reported use of the MWFs and U.S. production levels found high correlations (r generally >0.7). Overall, the method described here is likely to have provided a systematic and reliable ranking that better reflects the variability of exposure to three types of MWFs than approaches applied in the past. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resources: a list of keywords in the occupational histories that were used to link study subjects to the metalworking fluids (MWFs) modules; recommendations from the literature on selection of MWFs based on type of machining operation, the metal being machined and decade; popular additives to MWFs; the number and proportion of controls who reported various MWF responses by job group; the number and proportion of controls assigned to the MWF types by job group and exposure category; and the distribution of cases and controls assigned various levels of probability by MWF type.].

Blood levels of cadmium and lead in residents near abandoned metal mine areas in Korea.

We analyzed national data on blood lead levels (BLL) and blood cadmium levels (BCL) in residents living near 38 abandoned metal mining areas (n = 5,682, 18-96 years old) in Korea that were collected by the first Health Effect Surveillance for Residents in Abandoned Metal mines (HESRAM) from 2008 to 2011. The geometric mean BCL and BLL were 1.60 µg/L (95 % CI = 1.57-1.62 µg/L) and 2.87 µg/dL (95 % CI = 2.84-2.90 µg/dL), respectively, notably higher than levels in the general population in Korea and other countries. We found significantly higher BLL and BCL levels in people living within 2 km of an abandoned metal mine (n = 3,165, BCL = 1.87 µg/L, BLL = 2.91 µg/dL) compared to people living more than 2 km away (n = 2,517, BCL = 1.31 µg/L, BLL = 2.82 µg/dL; P < 0.0001) and to the general population values reported in the literature.