RESUMO
Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.
RESUMO
Cellulose nanocrystals (CNCs) are rod-like nanoparticles whose chiral self-assembly into photonic films has been promoted as a sustainable source of colouration. Upon drying, an aqueous CNC suspension passes through two regimes: first, a liquid phase, where the CNCs self-organise into a cholesteric liquid crystal, followed by a kinetically-arrested phase, where the helicoidal structure compresses upon loss of solvent, resulting in a solid film with vibrant structural colour. The transition between these two regimes plays an important role in the visual appearance of photonic CNC films, but details on when and how kinetic arrest occurs have remained elusive. In this work, we combine angle-resolved optical spectroscopy of photonic films (approx. 100 vol% CNC) with a model for compressed helicoidal structures to retrieve the suspension conditions during kinetic arrest (approx. 10 vol% CNC). This analysis indicates a shift in the mechanism of kinetic arrest from a glass transition at lower ionic strength to gelation at higher ionic strength, explaining the trends in domain size and film colour. In contrast, neutral additives (glucose, poly(ethylene glycol)) appear to primarily reduce the compression upon drying without affecting cholesteric behaviour, as supported by a general analytical model. These findings deepen our understanding of CNC co-assembly with various commonly-used additives, enabling better control over the production of multifunctional structurally coloured materials.
RESUMO
Maximizing the scattering of visible light within disordered nano-structured materials is essential for commercial applications such as brighteners, while also testing our fundamental understanding of light-matter interactions. The progress in the research field has been hindered by the lack of understanding how different structural features contribute to the scattering properties. Here we undertake a systematic investigation of light scattering in correlated disordered structures. We demonstrate that the scattering efficiency of disordered systems is mainly determined by topologically invariant features, such as the filling fraction and correlation length, and residual variations are largely accounted by the surface-averaged mean curvature of the systems. Optimal scattering efficiency can thus be obtained from a broad range of disordered structures, especially when structural anisotropy is included as a parameter. These results suggest that any disordered system can be optimised for whiteness and give comparable performance, which has far-reaching consequences for the industrial use of low-index materials for optical scattering.
RESUMO
Polysaccharides are a class of biopolymers that are widely exploited in living organisms for a diversity of applications, ranging from structural reinforcement to energy storage. Among the numerous types of polysaccharides found in the natural world, cellulose is the most abundant and widespread, as it is found in virtually all plants. Cellulose is typically organized into nanoscale crystalline fibrils within the cell wall to give structural integrity to plant tissue. However, in several species, such fibrils are organized into helicoidal nanostructures with a periodicity comparable to visible light (i.e., in the range 250-450 nm), resulting in structural coloration. As such, when taking bioinspiration as a design principle, it is clear that helicoidal cellulose architectures are a promising approach to developing sustainable photonic materials. Different forms of cellulose-derived materials have been shown to produce structural color by exploiting self-assembly processes. For example, crystalline nanoparticles of cellulose can be extracted from natural sources, such as cotton or wood, by strong acid hydrolysis. Such "cellulose nanocrystals" (CNCs) have been shown to form colloidal suspensions in water that can spontaneously self-organize into a cholesteric liquid crystal phase, mimicking the natural helicoidal architecture. Upon drying, this nanoscale ordering can be retained into the solid state, enabling the specific reflection of visible light. Using this approach, colors from across the entire visible spectrum can be produced, alongside striking visual effects such as iridescence or a metallic shine. Similarly, polymeric cellulose derivatives can also organize into a cholesteric liquid crystal. In particular, edible hydroxypropyl cellulose (HPC) is known to produce colorful mesophases at high concentrations in water (ca. 60-70 wt %). This solution state behavior allows for interesting visual effects such as mechanochromism (enabling its use in low-cost colorimetric pressure or strain sensors), while trapping the structure into the solid state enables the production of structurally colored films, particles and 3D printed objects. In this article, we summarize the state-of-the-art for CNC and HPC-based photonic materials, encompassing the underlying self-assembly processes, strategies to design their photonic response, and current approaches to translate this burgeoning green technology toward commercial application in a wide range of sectors, from packaging to cosmetics and food. This overview is supported by a summary of the analytical techniques required to characterize these photonic materials and approaches to model their optical response. Finally, we present several unresolved scientific questions and outstanding technical challenges that the wider community should seek to address to develop these sustainable photonic materials.
RESUMO
Understanding (de)lithiation heterogeneities in battery materials is key to ensure optimal electrochemical performance. However, this remains challenging due to the three-dimensional morphology of electrode particles, the involvement of both solid- and liquid-phase reactants and a range of relevant timescales (seconds to hours). Here we overcome this problem and demonstrate the use of confocal microscopy for the simultaneous three-dimensional operando measurement of lithium-ion dynamics in individual agglomerate particles, and the electrolyte in batteries. We examine two technologically important cathode materials: LixCoO2 and LixNi0.8Mn0.1Co0.1O2. The surface-to-core transport velocity of Li-phase fronts and volume changes are captured as a function of cycling rate. Additionally, we visualize heterogeneities in the bulk and at agglomerate surfaces during cycling, and image microscopic liquid electrolyte concentration gradients. We discover that surface-limited reactions and intra-agglomerate competing rates control (de)lithiation and structural heterogeneities in agglomerate-based electrodes. Importantly, the conditions under which optical imaging can be performed inside the complex environments of battery electrodes are outlined.
RESUMO
The structural coloration of arthropods often arises from helicoidal structures made primarily of chitin. Although it is possible to achieve analogous helicoidal architectures by exploiting the self-assembly of chitin nanocrystals (ChNCs), to date no evidence of structural coloration has been reported from such structures. Previous studies are identified to have been constrained by both the experimental inability to access sub-micrometer helicoidal pitches and the intrinsically low birefringence of crystalline chitin. To expand the range of accessible pitches, here, ChNCs are isolated from two phylogenetically distinct sources of α-chitin, namely fungi and shrimp, while to increase the birefringence, an in situ alkaline treatment is performed, increasing the intensity of the reflected color by nearly two orders of magnitude. By combining this treatment with precise control over ChNC suspension formulation, structurally colored chitin-based films are demonstrated with reflection tunable from blue to near infrared.
Assuntos
Quitina , Nanopartículas , Quitina/química , Nanopartículas/química , SuspensõesRESUMO
The brightest colours in nature often originate from the interaction of light with materials structured at the nanoscale. Different organisms produce such coloration with a wide variety of materials and architectures. In the case of bacterial colonies, structural colours stem for the periodic organization of the cells within the colony, and while considerable efforts have been spent on elucidating the mechanisms responsible for such coloration, the biochemical processes determining the development of this effect have not been explored. Here, we study the influence of nutrients on the organization of cells from the structurally coloured bacteria Flavobacterium strain IR1. By analysing the optical properties of the colonies grown with and without specific polysaccharides, we found that the highly ordered organization of the cells can be altered by the presence of fucoidans. Additionally, by comparing the organization of the wild-type strain with mutants grown in different nutrient conditions, we deduced that this regulation of cell ordering is linked to a specific region of the IR1 chromosome. This region encodes a mechanism for the uptake and metabolism of polysaccharides, including a polysaccharide utilization locus (PUL operon) that appears specific to fucoidan, providing new insight into the biochemical pathways regulating structural colour in bacteria.
Assuntos
Bactérias , Polissacarídeos , Bactérias/metabolismo , Cor , Polissacarídeos/metabolismoRESUMO
The transfer of chirality across length-scales is an intriguing and universal natural phenomenon. However, connecting the properties of individual building blocks to the emergent features of their resulting large-scale structure remains a challenge. In this work, we investigate the origins of mesophase chirality in cellulose nanocrystal suspensions, whose self-assembly into chiral photonic films has attracted significant interest. By correlating the ensemble behaviour in suspensions and films with a quantitative morphological analysis of the individual nanoparticles, we reveal an inverse relationship between the cholesteric pitch and the abundance of laterally-bound composite particles. These 'bundles' thus act as colloidal chiral dopants, analogous to those used in molecular liquid crystals, providing the missing link in the hierarchical transfer of chirality from the molecular to the colloidal scale.
Assuntos
Cristais Líquidos , Nanopartículas , Celulose/química , Cristais Líquidos/química , Nanopartículas/química , Óptica e Fotônica , SuspensõesRESUMO
Daytime radiative cooling (DRC) materials offer a sustainable approach to thermal management by exploiting net positive heat transfer to deep space. While such materials typically have a white or mirror-like appearance to maximize solar reflection, extending the palette of available colors is required to promote their real-world utilization. However, the incorporation of conventional absorption-based colorants inevitably leads to solar heating, which counteracts any radiative cooling effect. In this work, efficient sub-ambient DRC (Day: -4 °C, Night: -11 °C) from a vibrant, structurally colored film prepared from naturally derived cellulose nanocrystals (CNCs), is instead demonstrated. Arising from the underlying photonic nanostructure, the film selectively reflects visible light resulting in intense, fade-resistant coloration, while maintaining a low solar absorption (≈3%). Additionally, a high emission within the mid-infrared atmospheric window (>90%) allows for significant radiative heat loss. By coating such CNC films onto a highly scattering, porous ethylcellulose (EC) base layer, any sunlight that penetrates the CNC layer is backscattered by the EC layer below, achieving broadband solar reflection and vibrant structural color simultaneously. Finally, scalable manufacturing using a commercially relevant roll-to-roll process validates the potential to produce such colored radiative cooling materials at a large scale from a low-cost and sustainable feedstock.
Assuntos
Nanoestruturas , Fótons , Temperatura Baixa , Nanoestruturas/química , Transição de Fase , Luz SolarRESUMO
Cellulose nanocrystals (CNCs) can spontaneously assemble into chiral nematic films capable of reflecting circularly polarized light in the visible range. As many other photonic materials obtained by bottom-up approaches, CNC films often display defects that greatly impact their visual appearance. Here, we study the optical response of defects in photonic CNC films, coupling optical microscopy with hyperspectral imaging, and we compare it to optical simulations of discontinuous cholesteric structures of increasing complexity. Cross-sectional SEM observations of the film structure guided the choice of simulation parameters and showed excellent agreement with experimental optical patterns. More importantly, it strongly suggests that the last fraction of CNCs to self-assemble, upon solvent evaporation, does not undergo the typical nucleation and growth pathway, but a spinodal decomposition, an alternative self-assembly pathway so far overlooked in cast films and that can have far-reaching consequences on choices of CNC sources and assembly conditions.