Arthroscopic Training Courses Improve Trainee Arthroscopy Skills: A Simulation-Based Prospective Trial.

PURPOSE: To evaluate the correlation between timed task performance on an arthroscopy shoulder simulator and participation in a standardized expert shoulder arthroscopy educational course. METHODS: Orthopaedic trainees were voluntarily recruited from over 25 residency programs throughout the United States and Canada. Each trainee was tested on arrival at the Arthroscopy Association of North America orthopaedic learning center on a virtual reality arthroscopy shoulder simulator, and his or her performance was objectively scored. Each trainee's postgraduate year level was recorded, as was his or her experience in residency with shoulder arthroscopy as measured by Accreditation Council for Graduate Medical Education case-log totals. After the focused 4-day training curriculum consisting of didactics and cadaveric experience, each trainee was re-evaluated on the same simulator. Statistical analysis was performed to determine if participation in the course was associated with changes in simulation performance from before to after assessment. RESULTS: Forty-eight trainees completed the testing. On completion of the course, trainees showed significant improvements in all objective measures recorded by the simulator. Total probe distance needed to complete the task decreased by 42% (from 420.4 mm to 245.3 mm, P < .001), arthroscope tip distance traveled decreased by 59% (from 194.1 mm to 80.2 mm, P < .001), and time to completion decreased by 38% (from 66.8 seconds to 41.6 seconds, P < .001). Highly significant improvements in all 3 measures suggest improved instrument handling, anatomic recognition, and arthroscopy-related visual-spatial ability. CONCLUSIONS: This study shows objective improvement in orthopaedic trainee basic arthroscopy skill and proficiency after a standardized 4-day arthroscopy training curriculum. The results validate the Arthroscopy Association of North America resident training course and its curriculum with objective evidence of benefit. LEVEL OF EVIDENCE: Level III, prospective study of nonconsecutive participants.

Biomechanical Comparison of a Novel Multiplanar, Perpendicular Whipstitch With the Krackow Stitch and Standard Commercial Whipstitch.

Background: Using alternating orthogonal suture throws with the looped whipstitch technique may allow enhanced suture fixation. Hypothesis: It was hypothesized that this novel multiplanar, perpendicular looped whipstitch (MP) technique would have improved biomechanical properties compared with the standard looped whipstitch (WS) and Krackow stitch (KS). Study Design: Controlled laboratory study. Methods: A total of 30 cadaveric tibialis anterior tendons were randomly assigned into 3 groups of 10. Tendons were secured to a custom clamp, and the other end was sutured using 1 of 3 techniques: the KS, WS, or novel MP. The MP was performed with alternating orthogonal throws starting right to left, then front to back, left to right, and back to front. Each technique used 4 passes of No. 2 FiberWire spaced 5 mm apart and ending 10 mm from the tendon end. Tendons were preloaded to 5 N, pretensioned to 50 N at 100 mm/min for 3 cycles, returned to 5 N for 1 minute, cycled from 5 to 100 N at 200 mm/min for 100 cycles, and then loaded to failure at 20 mm/min. Elongation was recorded after pretensioning and cycling and was measured both across the suture-tendon interface and from the base of the suture-tendon interface to markings on the suture limbs (construct elongation). One-way analyses of variance were performed, with Bonferroni post hoc analysis when appropriate. Results: There were no differences in cross-sectional area or stiffness among the 3 techniques. The ultimate load for WS (183.33 ± 57.44 N) was less compared with both MP (270.76 ± 39.36 N) and KS (298.90 ± 25.94 N) (P ≤ .001 for both). There was less construct elongation for KS compared with WS and MP for total displacement, measured from pretensioning to the end of cycling (P < .001). All 3 techniques saw a decrease in length (shortening) at the suture-tendon interface during testing. There was more shortening at the suture-tendon interface for WS compared with KS (P = .006). Conclusion: The KS appears superior, as it maximized strength while minimizing construct elongation or graft shortening. The ultimate load of the MP technique was greater than that of the standard technique but not significantly different from that of the KS technique. Clinical Relevance: The KS is preferred. If using a WS, multiplanar, perpendicular passes should be considered.

Radial Tears of the Lateral Meniscus-Two Novel Repair Techniques: A Biomechanical Study.

BACKGROUND: A common treatment for radial tears of the meniscus has historically been partial meniscectomy. Owing to the poor outcomes associated with partial meniscectomy, repair of the meniscus is an important treatment option. It is important to evaluate different repair techniques for radial tears of the meniscus. PURPOSE/HYPOTHESIS: The purpose of this study was to evaluate 2 novel techniques to repair radial tears of the lateral meniscus. The 2 techniques were compared biomechanically with the cross-suture method with an inside-out technique. The authors hypothesized that novel repair techniques would result in less displacement after cyclic loading, increased load required to displace the repair 3 mm, greater load to failure, decreased displacement at load to failure, and increased stiffness of the repair, resulting in a construct that more closely re-creates the function of the intact meniscus. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 36 fresh-frozen cadaveric tibial plateaus containing intact menisci were obtained. The menisci were divided into 3 groups (n = 12 in each group), and each meniscus was repaired simulating an inside-out technique. The 3 repairs completed were the hashtag, crosstag, and cross-suture techniques. Radial tears were created at the midbody of the lateral meniscus and repaired via the 3 techniques. The repaired menisci were attached to an axial loading machine and tested for cyclic and failure loading. RESULTS: After cyclic loading, the cross-suture repair displaced 4.78 ± 1.65 mm; the hashtag, 2.42 ± 1.13 mm; and the crosstag, 3.13 ± 1.77 mm. The hashtag and cross-tag repairs both resulted in significantly less displacement (P = .003 and .024, respectively) as compared with the cross-suture repair. The cross-suture technique had a load to failure of 81.43 ± 14.31 N; the hashtag, 86.08 ± 23.58 N; and the crosstag, 62.50 ± 12.15 N. The cross-suture and hashtag repairs both resulted in a greater load to failure when compared with the crosstag (P = .009 and .009, respectively). There was no difference comparing the load required to displace the cross-suture technique 3 mm versus the hashtag or crosstag technique (P = .564 and .094, respectively). However, when compared with the crosstag technique, the hashtag technique required a significantly greater load to displace the repair 3 mm (P = .015). CONCLUSION: This study introduced 2 novel repair techniques-hashtag and crosstag-that did not demonstrate superiority in terms of load to failure or stiffness, but both repairs were statistically superior to the cross-suture repair in terms of displacement after cyclic loading. Considerations that may influence the validity of these techniques include cost, surgical time, and increased technical demand. CLINICAL RELEVANCE: Radial tears of the meniscus are difficult to repair. Further research into more stable constructs is necessary.