Mixed Zirconium Phosphate Bis-Phosphonomethyl Glycine from Nanocrystalline α-Zirconium Phosphate: A Tailored Suite for Gold Nanoparticles.

A novel synthetic approach was investigated for the preparation of nanoplatelets of mixed zirconium phosphate bis-phosphonomethyl glycine, ZPGly, by the reaction of a gel of nanocrystalline α-type zirconium phosphate with N,N-bis-phosphonomethyl glycine, H3Gly. The syntheses were carried out in the absence of hydrofluoric acid by changing both the reagent relative amounts and temperature. An H3Gly/Zr molar ratio >2 did not significantly improve the degree of crystallinity of the materials, while an increase of temperature from 80 °C to 120 °C improved the crystallinity; the best result was obtained with H3Gly/Zr molar ratio = 2 and with a temperature reaction of 120 °C. The sample consisted of nanoplatelets with the size in the range 20-40 nm, and it was successfully exfoliated by treatment with a solution of methylamine. By treatment of the ZPGly colloidal dispersions with HAuCl4, a color change from white to red-violet was observed, indicating the formation of gold nanoparticles. The size and morphology of the gold particles were affected by the degree of crystallinity and, in turn, by the composition of the ZPGly support. As a matter of fact, large micrometric Au particles with a cubo-octahedral morphology were obtained by using the less crystalline ZPGly_R2-80 sample, while interconnected Au particles, with a size of about 16 nm, were obtained by using ZPGly_R2-120. The samples exhibited an absorption maximum in the visible region due to the surface plasmon resonance of gold nanoparticles.

Influence of Pore Size in Benzoin Condensation of Furfural Using Heterogenized Benzimidazole Organocatalysts.

A designed N-heterocyclic carbene (NHC) catalyst was covalently anchored on a range of mesoporous and hierarchical supports, to study the influence of pore size in the benzoin condensation of furfural. The structural and spectroscopic characteristics of the anchored catalysts were investigated, also with the help of molecular dynamics simulations, in order to rationalize the degree of stability and recyclability of the heterogenized organocatalysts. Quantitative yields (99 %) and complete recyclability were maintained after several cycles, vindicating the design rationale.

DEM-Based Approach for the Modeling of Gelation and Its Application to Alginate.

The gelation of biopolymers is of great interest in the material science community and has gained increasing relevance in the past few decades, especially in the context of aerogels─lightweight open nanoporous materials. Understanding the underlying gel structure and influence of process parameters is of great importance to predict material properties such as mechanical strength. In order to improve understanding of the gelation mechanism in aqueous solution, this work presents a novel approach based on the discrete element method for the mesoscale for modeling gelation of hydrogels, similarly to an extremely coarse-grained molecular dynamics (MD) approach. For this, polymer chains are abstracted as dimer units connected by flexible bonds and interactions between units and with the environment, that is, diffusion in implicit water, are described. The model is based on Langevin dynamics and includes an implicit probabilistic ion model to capture the effects of ion availability during ion-mediated gelation. The model components are fully derived and parameterized using literature data and theoretical considerations based on a simplified representation of atomistic processes. The presented model enables investigations of the higher-scale network formation during gelation on the micrometer and millisecond scale, which are beyond classical modeling approaches such as MD. As a model system, calcium-mediated alginate gelation is investigated including the influence of ion concentration, polymer composition, polymer concentration, and molecular weight. The model is verified against numerous literature data as well as own experimental results for the corresponding Ca-alginate hydrogels using nitrogen porosimetry, NMR cryoporometry, and small-angle neutron scattering. The model reproduces both bundle size and pore size distribution in a reasonable agreement with the experiments. Overall, the modeling approach paves the way to physically motivated design of alginate gels.

Combined solid-state NMR, FT-IR and computational studies on layered and porous materials.

Understanding the structure-property relationship of solids is of utmost relevance for efficient chemical processes and technological applications in industries. This contribution reviews the concept of coupling three well-known characterization techniques (solid-state NMR, FT-IR and computational methods) for the study of solid state materials which possess 2D and 3D architectures and discusses the way it will benefit the scientific communities. It highlights the most fundamental and applied aspects of the proactive combined approach strategies to gather information at a molecular level. The integrated approach involving multiple spectroscopic and computational methods allows achieving an in-depth understanding of the surface, interfacial and confined space processes that are beneficial for the establishment of structure-property relationships. The role of ssNMR/FT-IR spectroscopic properties of probe molecules in monitoring the strength and distribution of catalytic active sites and their accessibility at the porous/layered surface is discussed. Both experimental and theoretical aspects will be considered by reporting relevant examples. This review also identifies and discusses the progress, challenges and future prospects in the field of synthesis and applications of layered and porous solids.

Influence of Silicodactyly in the Preparation of Hybrid Materials.

The organic⁻inorganic hybrid materials have attracted great attention due to their improved or unusual properties that open promising applications in different areas such as optics, electronics, energy, environment, biology, medicine and heterogeneous catalysis. Different types of silicodactyl platforms grafted on silica inorganic supports can be used to synthesize hybrid materials. A careful evaluation of the dactyly of the organic precursors, normally alkoxysilanes, and of the type of interaction with the inorganic supports is presented. In fact, depending on the hydrophilicity of the silica surface (e.g., number and density of surface silanols) as well as on the grafting conditions, the hydrolysis and condensation reaction of the silylated moieties can involve only one or two out of three alkoxysilane groups. The influence of silicodactyly in the preparation of organic-inorganic silica-based hybrids is studied by TGA, 29Si, ¹H and 13C solid-state NMR and FTIR spectroscopies, with the support of Molecular Dynamics calculations. Computational studies are used to forecast the influence of the different grafting configurations on the tendency of the silane to stick on the inorganic surface.

Mesoporous Silica Scaffolds as Precursor to Drive the Formation of Hierarchical SAPO-34 with Tunable Acid Properties.

Using a distinctive bottom-up approach, a hierarchical silicoaluminophosphate, SAPO-34, has been synthesized using cetyl trimethylammonium bromide (CTAB) encapsulated within ordered mesoporous silica (MCM-41) that serves as both the silicon source and mesoporogen. The structural and textural properties of the hierarchical SAPO-34 were contrasted against its microporous analogue, and the nature, strength, and accessibility of the Brønsted acid sites were studied using a range of physicochemical characterization tools; notably probe-based FTIR and solid-state magic angle spinning (SS MAS) NMR spectroscopies. Whilst CO was used to study the acid properties of hierarchical SAPO-34, bulkier molecular probes (including pyridine, 2,4,6-trimethylpyridine and 2,6-di-tert-butylpyridine) allowed particular insight into the enhanced accessibility of the acid sites. The activity of the hierarchical SAPO-34 catalyst was evaluated in the industrially-relevant, acid-catalyzed Beckmann rearrangement of cyclohexanone oxime to ϵ-caprolactam, under vapor-phase conditions. These catalytic investigations revealed a significant enhancement in the yield of ϵ-caprolactam using our hierarchical SAPO-34 catalyst compared to SAPO-34, MCM-41, or a mechanical mixture of these two phases. The results highlight the merits of our design strategy for facilitating enhanced mass transfer, whilst retaining favorable acid site characteristics.

Investigating the Interaction of Water Vapour with Aminopropyl Groups on the Surface of Mesoporous Silica Nanoparticles.

The interaction of water molecules with the surface of hybrid silica-based mesoporous materials is studied by 29 Si, 1 H and 13 C solid-state NMR and IR spectroscopy, with the support of ab initio calculations. The surface of aminopropyl-grafted mesoporous silica nanoparticles is studied in the dehydrated state and upon interaction with controlled doses of water vapour. Former investigations described the interactions between aminopropyl and residual SiOH groups; the present study shows the presence of hydrogen-bonded species (SiOH to NH2 ) and weakly interacting "free" aminopropyl chains with restricted mobility, together with a small amount of protonated NH3+ groups. The concentration of the last-named species increased upon interaction with water, and this indicates reversible and fast proton exchange from water molecules to a fraction of the amino groups. Herein, this is discussed and explained for the first time, by a combination of experimental and theoretical approaches.

Aquivion-Based Spray Freeze-Dried Composite Materials for the Cascade Production of γ-Valerolactone.

The development of multifunctional catalysts is a necessary step to effectively carry out one-pot cascade reactions, such as that from furfural to γ-valerolactone. This research effort faces the challenge posed by the intrinsic limit of how many kinds of catalytic sites a single material can bear. In this work, the application of Spray-Freeze Drying (SFD) as a synthetic technique for the preparation of a wide range of innovative composite multi-functional catalysts is reported. Herein we show that by the proper combination of Aquivion as a highly active Brønsted acid catalyst and metal oxides as both support materials and Lewis acids (LAS) enable to achieve highly unique efficient and effective dual acid composite catalysts that are able to carry out the cascade reaction from furfural to γ-valerolactone. The dual catalytic system comprised of Aq/ZrO2 with 30 % polymer content prepared via spray-freeze drying exhibited GVL yields of 25 % after only 2 h at 180 °C and a remarkably high productivity of 4470 µmolGVL gCat -1 h-1, one of the highest reported results. Mechanistic studies based on experimental and advanced characterisation and spectroscopic techniques, such as, SEM, TEM, 15N MAS NMR and 19F MAS NMR indicate that activity arises from the proper tuning of BAS/LAS (Brønsted Acid Site/Lewis Acid Site) acidic properties.

Aldehyde-containing clays: a sustainable approach against the olive tree pest, Bactrocera oleae.

A set of organic/inorganic layered materials was obtained by functionalizing a montmorillonite-containing bentonite natural clay with linear aliphatic C6 or C7 aldehydes through a cost-effective and technologically simple incipient-wetness deposition method. The solids were investigated by means of a multi-technique approach (X-ray powder diffraction, XRPD, scanning electron microscopy, SEM, Fourier-transform infrared spectroscopy, FT-IR, thermogravimetric analysis, TGA, elemental analysis and solid-state nuclear magnetic resonance, ssNMR) to clarify the nature of the deposited organic species and the mode of interaction between the aldehyde and the clay. Since both natural clays and short-chain linear aldehydes find application as alternative strategies in the control of the olive fruit fly, Bactrocera oleae, the hybrid layered materials were tested under real-life conditions and their insect-inhibiting capability was evaluated in open-field trials on olive tree orchards in Tuscany, Central Italy. Specific tests were conducted to evaluate the resistance of the solids to weathering and their capability to provide a constant and long-lasting release of the bioactive ingredient. Aldehyde-containing bentonite clays have shown promising performance in controlling B. oleae infestation (with up to 86-95% reduction of affected olive fruits) in open-field trials across two years in two locations with different pedological and meteo-climatic characteristics.

Novel insights on magadiite disaggregation: a multitechnique study on thermal stability.

Disaggregated magadiite was obtained through ion-exchange in acidic media from magadiite intercalated in the synthesis with cetyltrimethylamonium cations. The combination of Soxhlet extraction and ultrasound during the procedure resulted in different morphology and different properties when compared with the pristine material, as observed by SEM. Thermal and surface properties studies performed by VT-XRD, TG, VT-FTIR, HETCOR SS-NMR, and N2 physisorption show that disaggregated magadiite presents a basal space of 1.35 nm and that [SiO4] entities of adjacent magadiite silicate layers connect during ion-exchange under ultrasound. Despite these bonding events, the surface area increased from 20-26 m(2) g(-1) in CTA-magadiite to 55-72 m(2) g(-1) in disaggregated magadiite.

Structural characterization and thermal and chemical stability of bioactive molecule-hydrotalcite (LDH) nanocomposites.

Layered double hydroxides (LDH) are versatile materials used for intercalating bioactive molecules, both in pharmaceutical and cosmetic fields, with the purpose of protecting them from degradation, enhancing their water solubility to increase bioavailability, and/or obtaining modified release properties. The properties of the intercalation compounds of Mg/Al_LDH and Zn/Al_LDH with different drugs and sunscreens, namely diclofenac, ketoprofen, gliclazide, retinoic acid, furosemide, para-aminobenzoic acid and 2-phenylbenzimidazolsulfonic (Eusolex) acid, have been studied by crystallographic, spectroscopic and thermogravimetric techniques and by solid state NMR, to shed light on their structure, their molecular interactions and their stability from the thermal and chemical viewpoint. The structural features were described with particular attention to the interaction between the organic and inorganic components and to the stability of the intercalation products. For the first time two synchrotron radiation powder diffraction patterns of organic-containing LDH were solved and refined by Rietveld methods to obtain an experimental crystal structure.

Immobilization of Alendronate on Zirconium Phosphate Nanoplatelets.

Different amounts of sodium-alendronate (ALN) were loaded into layered zirconium phosphates of alpha and gamma type (αZP and γZP) by means of topotactic exchange reactions of phosphate with ALN. In order to extend the exchange process to the less accessible interlayer regions, ALN solutions were contacted with colloidal dispersions of the layered solids previously exfoliated in single sheets by means of intercalation reaction of propylamine (for αZP) or acetone (for γZP). The ALN loading degree was determined by liquid P-nuclear magnetic resonance (NMR) and inductively coupled plasma (ICP), and it was reported as ALN/Zr molar ratios (Rs). The maximum R obtained for γZP was 0.34, while αZP was able to load a higher amount of ALN, reaching Rs equal to 1. The synthesized compounds were characterized by X-ray powder diffractometry, scanning electron microscopy (SEM), solid-state NMR, and infrared spectroscopy. The way the grafted organo-phosphonate groups were bonded to the layers of the host structure was suggested. The effect of ZP derivatives was assessed on cell proliferation, and the results showed that after 7 days of incubation, none of the samples showed a decrease in cell proliferation.

A novel route to enhance the dissolution of apatite: Structural incorporation of hydrogen phosphate.

Potential use of hydroxyapatite nanoparticles (HANPs) [Ca10(PO4)6(OH)2] as slow P-release fertilizer (SRF) has recently attracted wider attention. However, commercially available HANP (with Ca/P ratio = 1.667) is the least soluble calcium phosphate and thus limits its full potential as an SRF in agronomic applications. In this research, we sought to enhance the dissolution rate of HANPs by enriching hydrogen phosphate (HPO42-) species in the phosphate (PO43-) structural sites. Seven different types of pure crystalline HANPs were synthesized at a range of Ca/P ratio from 1.46 (at pH 6.0) to 2.10 (at pH 12.0). Complementary results from FTIR and solid-state 31P MAS NMR spectroscopies showed that HPO42- species is most abundant in HANPs crystallized at pH 6.0 and gradually depleted at higher pH products. The rate of depletion of HPO42- species is proportional to the increase in carbonate incorporation into the HANP lattice, which preferentially forms B-type carbonated HANPs. The enhanced dissolution rate of HANPs due to hydrogen phosphate incorporation was tested using a flow-through macro-dialysis system that limits the partial transition of HANPs to other solid phases, which otherwise interfere with dissolution. The results show that the dissolution rate of HANPs increased with decreasing pH of synthesis and was highest in HANPs at pH 6.0. The dissolution rate differed by ten times between HANPs synthesized at pH 7.0 and 10.0. Overall, the atom-efficient synthetic route developed and the ability to tune the dissolution rate of HANPs are significant steps forward in improving the P-release efficiency of a potent SRF and is expected to contribute to efforts toward enhancing agricultural sustainability.

One-pot synthesis and physicochemical properties of an organo-modified saponite clay.

An organo-saponite clay containing intercalated cetyltrimethylammonium (CTA(+)) cations was synthesized by an efficient one-step hydrothermal method and was compared with a CTA-exchanged saponite prepared by a classical postsynthesis intercalation route. In both hybrid samples, surfactant loading up to 10% was achieved. A comparative investigation of the physicochemical properties of both solids was carried out by a multidisciplinary approach, by using a combination of spectroscopic, structural, and thermal characterization tools. Powder X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM) data indicated that the one-pot-prepared solid showed that the presence of CTA(+) molecules in the synthesis gel did not affect the clay structure. In addition, thermal analysis suggested that the inorganic layers play an active role in stabilizing and protecting the surfactant molecules by increasing their thermal stability. A different arrangement of intercalated CTA(+) ions in the two hybrid clays was observed by solid state NMR in combination with Fourier transform infrared (FTIR) spectroscopy and assigned to a different all-trans/gauche conformation ratio of the surfactant depending on the synthetic method used to prepare the two final materials. The surfactant organization is also influenced by the lamellae charge density, which is different in the two organo-modified materials as found by (27)Al and (29)Si MAS NMR experiments.

Hyper Cross-Linked Polymers as Additives for Preventing Aging of PIM-1 Membranes.

Mixed-matrix membranes (MMMs) are membranes that are composed of polymers embedded with inorganic particles. By combining the polymers with the inorganic fillers, improvements can be made to the permeability compared to the pure polymer membranes due to new pathways for gas transport. However, the fillers, such as hyper cross-linked polymers (HCP), can also help to reduce the physical aging of the MMMs composed of a glassy polymer matrix. Here we report the synthesis of two novel HCP fillers, based on the Friedel-Crafts reaction between a tetraphenyl methane monomer and a bromomethyl benzene monomer. According to the temperature and the solvent used during the reaction (dichloromethane (DCM) or dichloroethane (DCE)), two different particle sizes have been obtained, 498 nm with DCM and 120 nm with DCE. The change in the reaction process also induces a change in the surface area and pore volumes. Several MMMs have been developed with PIM-1 as matrix and HCPs as fillers at 3% and 10wt % loading. Their permeation performances have been studied over the course of two years in order to explore physical aging effects over time. Without filler, PIM-1 exhibits the classical aging behavior of polymers of intrinsic microporosity, namely, a progressive decline in gas permeation, up to 90% for CO2 permeability. On the contrary, with HCPs, the physical aging at longer terms in PIM-1 is moderated with a decrease of 60% for CO2 permeability. 13C spin-lattice relaxation times (T1) indicates that this slowdown is related to the interactions between HCPs and PIM-1.

Adsorption Features of Various Inorganic Materials for the Drug Removal from Water and Synthetic Urine Medium: A Multi-Technique Time-Resolved In Situ Investigation.

Pharmaceutical active compounds, including hundreds of different substances, are counted among the emerging contaminants in waterbodies, whose presence raises a growing concern for the ecosystem. Drugs are metabolized and excreted mainly through urine as an unchanged active ingredient or in the form of metabolites. These emerging contaminants are not effectively removed with the technologies currently in use, making them a relevant environmental problem. This study proposes the treatment of urine and water at the source that can allow an easier removal of dissolved drugs and metabolites. The treatment of synthetic urine, with dissolved ibuprofen as a model compound, by adsorption, using various classes of inorganic materials, such as clays, hierarchical zeolites and ordered mesoporous silica (MCM-41), is presented. A multi-technique approach involving X-ray powder diffraction, solid-state NMR, UV-Vis and Raman spectroscopies was employed to investigate the adsorption process in inorganic adsorbents. Moreover, the uptake, the ensuing competition, the efficiency and selectivity as well as the packing of the model compound in ordered mesoporous silica during the incipient wetness impregnation process were all thoroughly monitored by a novel approach, involving combined complementary time-resolved in situ 1H and 13C MAS NMR spectroscopy as well as X-ray powder diffraction.

Mechanism of Hydration and Hydration Induced Structural Changes of Calcium Alginate Aerogel.

The most relevant properties of polysaccharide aerogels in practical applications are determined by their microstructures. Hydration has a dominant role in altering the microstructures of these hydrophilic porous materials. To understand the hydration induced structural changes of monolithic Ca-alginate aerogel, produced by drying fully cross-linked gels with supercritical CO2, the aerogel was gradually hydrated and characterized at different states of hydration by small-angle neutron scattering (SANS), liquid-state nuclear magnetic resonance (NMR) spectroscopy, and magic angle spinning (MAS) NMR spectroscopy. First, the incorporation of structural water and the formation of an extensive hydration sphere mobilize the Ca-alginate macromolecules and induce the rearrangement of the dry-state tertiary and quaternary structures. The primary fibrils of the original aerogel backbone form hydrated fibers and fascicles, resulting in the significant increase of pore size, the smoothing of the nanostructured surface, and the increase of the fractal dimension of the matrix. Because of the formation of these new superstructures in the hydrated backbone, the stiffness and the compressive strength of the aerogel significantly increase compared to its dry-state properties. Further elevation of the water content of the aerogel results in a critical hydration state. The Ca-alginate fibers of the backbone disintegrate into well-hydrated chains, which eventually form a quasi-homogeneous hydrogel-like network. Consequently, the porous structure collapses and the well-defined solid backbone ceases to exist. Even in this hydrogel-like state, the macroscopic integrity of the Ca-alginate monolith is intact. The postulated mechanism accounts for the modification of the macroscopic properties of Ca-alginate aerogel in relation to both humid and aqueous environments.

Predicting the Conformation of Organic Catalysts Grafted on Silica Surfaces with Different Numbers of Tethering Chains: The Silicopodality Concept.

Hybrid catalysts are attracting much attention, since they combine the versatility and efficiency of homogeneous organic catalysis with the robustness and thermal stability of solid materials, for example, mesoporous silica; in addition, they can be used in cascade reactions, for exploring both organic and inorganic catalysis at the same time. Despite the importance of the organic/inorganic interface in these materials, the effect of the grafting architecture on the final conformation of the organic layer (and hence its reactivity) is still largely unexplored. Here, we investigate a series of organosiloxanes comprising a pyridine ring (the catalyst model) and different numbers of alkylsiloxane chains used to anchor it to the MCM-41 surface. The hybrid interfaces are characterized with X-ray powder diffraction, thermogravimetric analyses, Fourier-transform infrared spectroscopy, nuclear magnetic resonance techniques and are modeled theoretically through molecular dynamics (MD) simulations, to determine the relationship between the number of chains and the average position of the pyridine group; MD simulations also provide some insights about temperature and solvent effects.

Sulfonamide antibiotics embedded in high silica zeolite Y: a combined experimental and theoretical study of host-guest and guest-guest interactions.

A combined experimental and computational study of the interactions of three sulfonamides--sulfadiazine, sulfamethazine, and sulfachloropyridazine--embedded into the cages of high silica zeolite Y is here proposed. For all host-guest systems, the close vicinity of aromatic rings with zeolite framework was evidenced by multidimensional and multinuclear ((1)H, (13)C, (29)Si) SS-NMR measurements. Host-guest and guest-guest interactions were also elucidated by in situ FTIR spectroscopy and confirmed by ab initio computational modeling. Single molecules of sulfamethazine and sulfachloropyridazine were stabilized inside the zeolite cage by the vicinity of methyl and amino groups, respectively. Sulfadiazine is present in both monomeric and dimeric forms. Multiple weak H-bonds and van der Waals type interactions between organic molecules and zeolite are responsible for the irreversible extraction from water of all the examined sulfa drugs.

A smart use of biomass derivatives to template an ad hoc hierarchical SAPO-5 acid catalyst.

A smart design of hierarchical SAPO-5 acid catalyst using biomass derived monosaccharides as sustainable and low-cost mesoporogens has been developed. The hierarchical SAPO-5 was characterized by several physico-chemical techniques to elucidate structure-properties relationships and was tested as a catalyst in the MW-assisted glucose transformation in 5-HMF using γ-valerolactone (GVL) as green solvent.