Control of light polarization by optically-induced-chirality in photosensitive nematic fluids.

Light polarization rotations, created by applied optical field, are examined experimentally and theoretically in a photosensitive chiral nematic fluid. The polarization rotation of the transmitted beam is initiated by illuminating the sample with uniform UV light. The operation is tunable and reversible, depending on the UV intensity. It was revealed that the rotations can be ascribed to the optical-field-induced chirality effect, where the helical structure in chiral nematics changes in accordance with the UV intensity. The evolution of the helical structure as well as its effect on the light polarization upon illumination by uniform UV light have been monitored experimentally and compared by calculations based on the continuum theory. Our results proved that a polarization field with specific characteristics can be achieved using the remote and precise optical control.

Soliton-like surface plasmon polaritons generated on the surface of a silver nanowire embedded in a Kerr nonlinear medium.

The behavior of surface plasmon polaritons (SPPs) generated on the surface of a silver nanowire by coaxial Gaussian beams in Kerr nonlinear mediums is studied numerically. Enhancement of the propagation of the SPPs is realized due to the introduction of the nonlinear effect. Further adjusting the nonlinearity or the beam's intensity results in a soliton-like propagation of SPPs. This can be explained by the nonlinear self-focusing effect transferring more light into SPP modes and counteracting the attenuation caused by the absorption of metal. This result may contribute to SPP-based applications where an enhanced propagation length is needed.

Numerical study on a random plasmonic laser in the metal-insulator-metal structure.

This Letter proposes a random plasmonic laser in the metal-insulator-metal (MIM) structure, in which the dielectric core with gain is dispersed with circular dielectric nanoscatterers. The numerical results from finite-difference time-domain simulation indicate that scattering by the randomly distributed dielectric nanoscatterers in the MIM waveguide provides feedback to the random laser with surface plasmon. The design bypasses the requirement of a distributed feedback structure for the plasmonic waveguide-based nanolasers, which is challenging and expensive in fabrication. Additionally, the MIM structure makes this type of random laser easily applicable to nanoscale integrated photonic devices and circuits.

Determinants affecting residents' waste classification intention and behavior: A study based on TPB and A-B-C methodology.

Waste classification is regarded as one of the most important strategies for waste management, and its success depends on the active participation of the public. Based on the theory of planned behavior (TPB) and attitude-behavior-condition (A-B-C) theory, this research investigated the key factors affecting residents' domestic waste classification intention (WCI) and waste classification behavior (WCB), and explored the moderating effects of three external factors including infrastructure (INF), government publicity (GP), and incentive measures (IM) on the intention-behavior relationship. The valid data were collected from 584 residents via conducting a face-to-face interview in Chengdu, a pilot city of waste classification in China, and analyzed by using the structural equation model (SEM). Results showed that residents' WCI and WCB had a significant discrepancy with the average values of 4.07 and 2.81, respectively. Attitude (AT), perceived behavior control (PBC) and classification knowledge (CK) were significantly related to residents' WCI, with AT (ß = 0.65, P < 0.001) having the greatest direct impact. Meanwhile, CK and INF had a stronger impact on the WCB than WCI. GP indirectly affected WCB through the intermediary effect of CK. In addition, INF and GP had a positively moderating effect on residents' waste classification intention-behavior relationship and can facilitate the intention-behavior conversion. By contrast, IM failed to promote the conversion of residents' classification intention into behavior, and had no direct significant influence on residents' WCB. Finally, some relevant policy suggestions were put forward for the new pilot cities of waste classification in China.

Electrically tunable polarization of random lasing from dye-doped nematic liquid crystals.

Tunable polarizing direction of random lasing emission by an applied electric field which radiated from the lateral end face of homogeneously aligned, dye-doped nematic liquid crystal (NLC) cell was demonstrated for the first time, to the best of our knowledge. The lasing emission was partially polarized in the direction along the director of the NLC without the applied electric field. By tuning the applied electric field, the NLC director could be rotated to arbitrary direction from homogeneous to homeotropic alignment, resulting in the polarizing direction of lasing emission to any direction from parallel to perpendicular to the substrate surface in the end face.

Full-color hologram using spatial multiplexing of dielectric metasurface.

In this Letter, we demonstrate theoretically a full-color hologram using spatial multiplexing of dielectric metasurface for three primary colors, capable of reconstructing arbitrary RGB images. The discrete phase maps for the red, green, and blue components of the target image are extracted through a classical Gerchberg-Saxton algorithm and reside in the corresponding subcells of each pixel. Silicon nanobars supporting narrow spectral response at the wavelengths of the three primary colors are employed as the basic meta-atoms to imprint the Pancharatnam-Berry phase while maintaining minimum crosstalk between different colors. The reconstructed holographic images agree well with the target images making it promising for colorful display.

Testing homogeneity of proportion ratios for stratified correlated bilateral data in two-arm randomized clinical trials.

Stratified data analysis is an important research topic in many biomedical studies and clinical trials. In this article, we develop five test statistics for testing the homogeneity of proportion ratios for stratified correlated bilateral binary data based on an equal correlation model assumption. Bootstrap procedures based on these test statistics are also considered. To evaluate the performance of these statistics and procedures, we conduct Monte Carlo simulations to study their empirical sizes and powers under various scenarios. Our results suggest that the procedure based on score statistic performs well generally and is highly recommended. When the sample size is large, procedures based on the commonly used weighted least square estimate and logarithmic transformation with Mantel-Haenszel estimate are recommended as they do not involve any computation of maximum likelihood estimates requiring iterative algorithms. We also derive approximate sample size formulas based on the recommended test procedures. Finally, we apply the proposed methods to analyze a multi-center randomized clinical trial for scleroderma patients.

Crystal phase and nanoscale size regulation utilizing the in-situ catalytic pyrolysis of bamboo sawdust in the recycling of spent lithium batteries.

Current Li-ion battery (LIB) recycling methods exhibit the disadvantages of low metal recovery efficiencies and high levels of pollution and energy consumption. Here, products generated via the in-situ catalytic pyrolysis of bamboo sawdust (BS) were utilized to regulate the crystal phase and nanoscale size of the NCM cathode to enhance the selective Li extraction and leaching efficiencies of other valuable metals from spent LIBs. The catalytic effect of the NCM cathode significantly promoted the release of gases from BS pyrolysis. These gases (H2, CO, and CH4) finally transformed the crystal phase of the NCM cathode from LiNixCoyMnzO2 into (Ni-Co/MnO/Li2CO3)/C. The size of the spent NCM cathode material was reduced approximately 31.7-fold (from 4.1 µm to 129.2 nm) after roasting. This could be ascribed to the in-situ catalytic decomposition of aromatic compounds generated via the primary pyrolysis of BS into C and H2 on the surface of the cathode material, resulting in the formation of the nanoscale composite (Ni-Co/MnO/Li2CO3)/C. This process enabled the targeted control of the crystal phase and nanoscale size of the material. Water leaching studies revealed a remarkable selective Li extraction efficiency of 99.27 %, and sulfuric acid leaching experiments with a concentration of 2 M revealed high extraction efficiencies of 99.15 % (Ni), 93.87 % (Co), and 99.46 % (Mn). Finally, a novel mechanism involving synergistic thermo-reduction and carbon modification for crystal phase regulation and nanoscale control was proposed. This study provides a novel concept for use in enhancing the recycling of valuable metals from spent LIBs utilizing biomass waste and practices the concept of "treating waste with waste".

Polarization and polarization control of random lasers from dye-doped nematic liquid crystals.

A polarimetric study of random laser (RL) emitted from dye-doped nematic liquid crystals (NLCs) is presented. We observed linearly polarized light, the orientation of which is in proximity to the bisection between the polarization direction at the maximal scattering in NLCs and the nematic director. Any arbitrary linear polarization of RLs can be obtained by rotating the NLC sample. The efficiency and output uniformity over the complete direction angle of 2π can be optimized by choosing a proper pump polarization.

Dynamic Trapping and Manipulation of Self-Assembled Ag Nanoplates as Efficient Plasmonic Tweezers.

Plasmonic tweezers based on periodic nanostructures have been used to manipulate particles through multiple and uniform local surface plasmon (LSP) fields. However, the coverage area of periodic nanostructures is limited, which restricts the range of trapping and manipulation. In this paper, we present a novel approach to achieve large-scale manipulation and trapping of microspheres by uniformly coupled LSP fields on a short-range disordered self-assembled Ag nanoplates (DSNP) film. The DSNP film is prepared by simple and low-cost methods─chemical growth and self-assembly technique, which overcome the challenges of preparing periodic nanostructures with a large coverage area. The uniform and coupled plasmon fields generated by this film provide enhanced electrodynamic interactions with particles, enabling the non-invasive and repeatable trapping of particles in solution. Utilizing sensitive LSPRs, dynamic manipulating particles was achieved by controlling the laser position. This large-scale platform of stable manipulation enabled by the DSNP film opens up new possibilities for the trapping and manipulation of nanoparticles in a variety of applications.

Fast response beam coupling in liquid crystal cells sandwiched between ZnSe substrates.

Fast responses (20 ms rising time) both in symmetrical two-wave and degenerate-four-wave mixing experiments were observed and investigated in C(60) doped 4,4'-n-pentylcyanobiphenyl liquid crystal cells sandwiched between bare ZnSe substrates with an electric field applied parallel to the cell surfaces. The ZnSe material seems responsible for the fast response due to its excellent charge carrier transportation capability. Strong fanning effect and transient features were seen and studied, hinting super strong photorefractive effect in the material system. This low voltage operated liquid crystal based photorefractive approach is promising in real time applications over visible to terahertz regime.

Optical magnetic field enhancement through coupling magnetic plasmons to Tamm plasmons.

We report on a theoretical investigation of the coupling between magnetic plasmons (MPs) and Tamm plasmons (TPs) in a metal-dielectric Bragg reflector (DBR) containing a gold nanowire pair array embedded in the low refractive index layer closest to the metal film. Strong coupling between MPs and TPs is observed, manifested by large anticrossings in the dispersion diagram. It creates a narrow-band hybridized MP mode with a Rabi-type splitting as large as 290 meV. Upon the excitation of this hybridized MP mode, a 2.5-fold enhancement of the magnetic field in the center of nanowire pairs is achieved as compared with the pure MP of the nanowire pairs embedded in a bare DBR structure (without the metal film). This result holds a promising potential application in magnetic nonlinearity and sensors.

Optical interband transitions in [111] poled relaxor-based ferroelectric 0.24Pb(In1/2Nb1/2)O3-(0.76 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 single crystal.

Optical transmission spectra of single crystal 0.24Pb(In1/2Nb1/2)O3-(0.76 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (x = 0.27, 0.33) were measured in the pseudo-cubic crystallographic directions [111] and [112̄]. Ferroelectric domain structures were observed in order to explain the difference of transmittance for the two composition crystals. Wavelength dependence of the absorption coefficients was measured and the optical energy band gaps were calculated for both direct and indirect transitions, which are Egd = 3.09-3.18 eV and Egi = 2.89-2.96 eV, respectively, and the phonon energy is Ep = 0.07-0.08 eV. The transmission spectra were explained by the refractive indices and extinction coefficients measured by spectroscopic ellipsometry.

Ethanol Production from the Mixture of Waste French Fries and Municipal Wastewater via Separate Hydrolysis and Fermentation.

The potential of bioethanol generation using the mixture of waste French fries (WFF) and municipal wastewater (MWW) via separate hydrolysis and fermentation (SHF) was evaluated in this study. The effect of WFF substrate loading (SL, 10%, 16%, and 20%, w/v) on the SHF was also examined. Both glucose production and hydrolysis efficiency increased with increasing of SL from 10 to 16% and the maximum glucose yield of 0.236 g glucose/g WFF and hydrolysis efficiency of 91.9% were obtained at SL of 16%. However, the glucose production and hydrolysis efficiency decreased when the SL further increased to 20% due to the inhibition on enzyme caused by higher glucose production. The mixture hydrolysate was then used as feedstock for ethanol fermentation. The maximum ethanol production of 22.69 g/L was obtained from SL of 16%. The highest rate of glucose conversion to ethanol was 84.2%. The results demonstrated that the mixture of WFF and MWW could be used for ethanol production by the SHF.

Bioethanol production from expired cookies and economic analysis for practical application.

This work examined the potential of bioethanol production from expired cookies (EC) by the separate hydrolysis and fermentation process. EC was hydrolyzed by glucoamylase with different enzyme addition (3.5 U/g to 140 U/g) to produce the EC hydrolysate. The glucose concentration increased with enzyme addition from 3.5 U/g to 14 U/g and the highest glucose concentration of 21.2 g/L was obtained. The EC hydrolysate was used by Saccharomyces cerevisiae for bioethanol production. The optimal ethanol production obtained from this study was 40.1 g/L in term of economics and efficiency. According to the mass balance, the highest ethanol yield from EC was 0.4 g/g. Techno-economic analysis of the plant with capacity of 5 tons EC/day was also assessed in this study. The total capital cost and annual operation cost were US$540400.7 and US$144543.9/y, respectively. The revenue of the plant was US$390522/y with the sales of 660 t/y ethanol and 412.5 t/y oils. The plant should feed the EC more than 1.04 t/d (334.2 t/y) to avoid the shutdown point. This is the first study to demonstrate the bioethanol production from EC and assess the economic feasibility for industrial application.

Process design and techno-economic analysis of fuel ethanol production from food waste by enzymatic hydrolysis and fermentation.

In this study, fuel ethanol production from food waste using enzymatic hydrolysis and fermentation was evaluated from techno-economic viewpoint. The plant was designed with a capacity of 10 t/d food waste and a lifetime of 15-year. The total capital cost, annual operation cost and annual net profits of the plant were US$ 367,552, US$ 155,959 and US$ 74,995.57, respectively. The plant was economically viable as long as the internal rate of return remained below 29.8%. The shortest payback time was 5 years with discount rate of 5%. The price of fuel ethanol and food waste treatment fee were the most important variables for the economic performance of the plant by sensitivity analysis. This work could provide the basic knowledge for techno-economic analysis of food waste treatment and promote the industrial production of fuel ethanol.

Enhanced magnetic response in a gold nanowire pair array through coupling with Bloch surface waves.

We numerically study the coupling of magnetic plasmon polaritons (MPPs) with Bloch surface waves (BSWs) in a system composed of a one-dimensional gold nanowire pair array lying on a periodic dielectric multilayer. At an appropriate period of the dielectric multilayer, maximum coupling takes place between the MPP and the BSW. It results in two branches of hybridized MPPs with a Rabi-type splitting as large as 125 meV. The maximal magnetic field intensity achieved in the center of nanowire pairs is enhanced greatly and an enhancement factor >1.5 is observed compared with that achieved by a nanowire pair array lying directly on a substrate. This has potential applications in nonlinear optics and near-field enhanced spectroscopy.

Testing equality of correlations of two paired binary responses from two treated groups in a randomized trial.

We explore measuring Scleroderma patient disease improvement at the paired body part level and account for their correlation with the long term goal of possibly redefining disease progression using a shorter clinical examination. We propose using a binary outcome to measure disease progression at each paired body part level, construct tests for assessing equality of the correlations between groups for each paired body part and determine sample size requirements for such tests in a two-arm randomized clinical trial. Simulations are performed to evaluate properties of the tests and the accuracy of our sample size formulae. We demonstrate our method with data from a multi-center two-arm randomized clinical trial.

Surface plasmon induced spot and line formation at interfaces of ITO coated LiNbO3 slabs and gigantic nonlinearity.

Remarkable spots and lines were clearly observed at the two interfaces of indium-tin-oxide coated Z-cut Fe-doped lithium noibate plates under illumination by milliwatt continuous-wave laser light; this occurred because of the visible surface plasmons (SPs) supported by the promising non-metal plasmonic system. The intriguing observations are here explained via the SP-strengthened nonlinear effect, through consideration of the electrostatic field (which is comparable to the atomic field) and its large gradient; this hints at a promising, highly sensitive plasmonic system. The gigantic nonlinear effect discussed in this paper should be ubiquitously existed in many oxide ferroelectric/semiconductor combinations and is promising for visible plasmonic applications.

Sensitive and visual detection of p-phenylenediamine by using dialdehyde cellulose membrane as a solid matrix.

A novel method was developed for the sensitive and visual detection of p-phenylenediamine (PPD) via immobilizing the target specie PPD on dialdehyde cellulose membrane (DCM) followed by the reaction with salicylaldehyde. The obtained solid fluorescent membrane (S-PPD-DCM) emitted yellow fluorescence under 365 nm UV light. DCM was not only used as a solid matrix but also played a vital role in the enrichment of PPD. Experimental variables influencing the fluorescence signal were investigated and optimized. Under the optimum conditions, a detection limit of 5.35 µg L-1 was obtained and two linear ranges were observed at 10-100 and 100-1000 µg L-1, respectively. Moreover, the fluorescence of the resultant membrane can still be visualized by naked eye when PPD concentration was 50 µg L-1. The detection of PPD was hardly affected by the coexistence of 1 mg L-1 of o-phenylenediamine, m-phenylenediamine or phenylamine, exhibiting good selectivity. The developed method involved in a two-step Schiff base reaction and enhanced the fluorescence emission via blocking nonradiative intramolecular rotation decay of the excited molecules. It was applied to determine the PPD in spiked hair dye with satisfactory results.