RESUMO
BACKGROUND: There is no universal hip implant suitably fills all femoral types, whether prostheses of porous short-stem suitable for Hip Arthroplasty is to be measured scientifically. METHODS: Ten specimens of femurs scanned by CT were input onto Mimics to rebuild 3D models; their *stl format dataset were imported into Geomagic-Studio for simulative osteotomy; the generated *.igs dataset were interacted by UG to fit solid models; the prosthesis were obtained by the same way from patients, and bored by punching bears designed by Pro-E virtually; cements between femora and prosthesis were extracted by deleting prosthesis; in HyperMesh, all compartments were assembled onto four artificial joint style as: (a) cemented long-stem prosthesis; (b) porous long-stem prosthesis; (c) cemented short-stem prosthesis; (d) porous short-stem prosthesis. Then, these numerical models of Finite Element Analysis were exported to AnSys for numerical solution. RESULTS: Observed whatever from femur or prosthesis or combinational femora-prostheses, "Kruskal-Wallis" value p > 0.05 demonstrates that displacement of (d) ≈ (a) ≈ (b) ≈ (c) shows nothing different significantly by comparison with 600 N load. If stresses are tested upon prosthesis, (d) ≈ (a) ≈ (b) ≈ (c) is also displayed; if upon femora, (d) ≈ (a) ≈ (b) < (c) is suggested; if upon integral joint, (d) ≈ (a) < (b) < (c) is presented. CONCLUSIONS: Mechanically, these four sorts of artificial joint replacement are stabilized in quantity. Cemented short-stem prostheses present the biggest stress, while porous short-stem & cemented long-stem designs are equivalently better than porous long-stem prostheses and alternatives for femoral-head replacement. The preferred design of those two depends on clinical conditions. The cemented long-stem is favorable for inactive elders with osteoporosis, and porously punched cementless short-stem design is suitable for patients with osteoporosis, while the porously punched cementless short-stem is favorable for those with a cement allergy. Clinically, the strength of this study is to enable preoperative strategy to provide acute correction and decrease procedure time.
Assuntos
Artroplastia de Quadril/instrumentação , Análise de Elementos Finitos , Prótese de Quadril , Imageamento Tridimensional/métodos , Desenho de Prótese/métodos , Realidade Virtual , Adulto , Artroplastia de Quadril/métodos , Feminino , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Prótese de Quadril/normas , Humanos , Porosidade , Desenho de Prótese/normas , Tomografia Computadorizada por Raios X/métodos , Adulto JovemRESUMO
BACKGROUND AND OBJECTIVES: There are many fixation methods for Pauwels- III fracture, the most common implants are Locking Plate (LP), Dynamic Hip Screw (DHS), Multiple Lag Screw (MLS), and mixed fixture (DHS+MLS) implants, the common procedure is HemiArthroplasty (HA). However, how these fixtures biomechanically function is not clear. The aims of this study are to compare the mechanical behaviors of these five implants by finite element modeling and determinate the most suitable procedure for individuals with Pauwels- III fractures. METHODS: We gathered 20 sets of femur images from CT scans in the *.dicom format first, and then processed them by using reverse engineering software programs, such as Mimics, Geomagic Studio, UG-8, Pro-Engineer and HyperMesh. Finally, we assembled and analyzed the five types of fixture models, the LP, DHS, MLS, DHS+LS and HA models, by AnSys. RESULTS: These numerical models of Pauwels III fractures, including fixators and a simulative HA, were validated by a previous study and a cadaver test. Our analytical findings include the following: the displacements of all fixtures were between 0.3801 and 1.0834 mm, and the differences were not statistically significantly different; the resulting average peaks in stress were e(Ha) = 43.859 ≤ d(LP) = 60.435 ≤ b(MLS) = 68.678 < c(LS+DHS) = 98.478 < a(DHS) = 248.595 in Mpa, indicating that the stress of DHS and DHS+LS are greater than those of LP, HA and MLS, while the last 3 models were not significantly different. CONCLUSIONS: To optimize the treatment for Pauwels III factures clinically, HA and LP should be proposed.
Assuntos
Fraturas do Colo Femoral , Fenômenos Biomecânicos , Parafusos Ósseos , Fêmur , Análise de Elementos Finitos , Fixação Interna de Fraturas , HumanosRESUMO
A multi-view three-dimensional stereophotogrammetry system was developed to capture 3D shape of breasts for breast cancer patients. The patients had received immediate unilateral breast reconstruction after mastectomy by the extended latissimus dorsi flap and without contralateral surgery. In order to capture the whole breast shape including the inframammary fold, the patients were introduced to the imaging room and leaned over the imaging rig to open up the inframammary fold and to expose the entire area of each breast. The imaging system consisted of eight high-resolution ([Formula: see text] pixels) digital cameras and four flash units. The cameras were arranged in four stereo pairs from four different view angles to cover the whole surface of the breasts. The system calibration was carried out ahead of every capture session, and the stereo images were matched to generate four range images to be integrated using an elastic model proposed. A watertight breast mesh model was reconstructed to measure the volume of the breast captured. The accuracy of using the developed multi-view stereophotogrammetry system for breast volume measurement was 11.12cc with SEM 7.74cc, comparing to the measurements of the water displacement method. It was concluded that the 3D stereophotogrammetry image system developed was more reliable than the method of water displacement.
Assuntos
Mamoplastia/métodos , Mastectomia/métodos , Fotogrametria/métodos , Artefatos , Calibragem , Feminino , Humanos , Imageamento TridimensionalRESUMO
OBJECTIVE: To investigate a registration approach for 2-dimension (2D) based on characteristic localization to achieve 3-dimension (3D) fusion from images of PET, CT and MR one by one. METHOD: A cubic oriented scheme of"9-point & 3-plane" for co-registration design was verified to be geometrically practical. After acquisiting DICOM data of PET/CT/MR (directed by radiotracer 18F-FDG etc.), through 3D reconstruction and virtual dissection, human internal feature points were sorted to combine with preselected external feature points for matching process. By following the procedure of feature extraction and image mapping, "picking points to form planes" and "picking planes for segmentation" were executed. Eventually, image fusion was implemented at real-time workstation mimics based on auto-fuse techniques so called "information exchange" and "signal overlay". RESULT: The 2D and 3D images fused across modalities of [CT+MR], [PET+MR], [PET+CT] and [PET+CT+MR] were tested on data of patients suffered from tumors. Complementary 2D/3D images simultaneously presenting metabolic activities and anatomic structures were created with detectable-rate of 70%, 56%, 54% (or 98%) and 44% with no significant difference for each in statistics. CONCLUSION: Currently, based on the condition that there is no complete hybrid detector integrated of triple-module [PET+CT+MR] internationally, this sort of multiple modality fusion is doubtlessly an essential complement for the existing function of single modality imaging.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional , Imageamento por Ressonância Magnética , Imagem Multimodal , Neoplasias/diagnóstico , Tomografia por Emissão de Pósitrons , Tomografia Computadorizada por Raios X , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND AND AIMS: Because there is no complete three-dimensional (3D) hybrid detector integrated PET+MRI internationally, this study aims to investigate a registration approach for a two-dimensional (2D) hybrid based on characteristic localization to achieve a 3D fusion from the images of PET and MRI as a whole. METHODS: A cubic-oriented scheme of "9-point and 3-plane" for a coregistration design was verified to be geometrically practical. Through 3D reconstruction and virtual dissection, human internal feature points were sorted to combine with preselected external feature points for matching process. By following the procedure of feature extraction and image mapping, the processes of "picking points to form planes" and "picking planes for segmentation" were executed. Eventually, the image fusion was implemented at the real-time workstation Mimics based on auto-fuse techniques called "information exchange" and "signal overlay". RESULTS: A complementary 3D image across PET+MRI modalities, which simultaneously present metabolic activities and anatomic structures, was created with a detectable rate of 56%. This is equivalent to the detectable rate of PET+CT or MRI+CT with no statistically significant difference, and it facilitates a 3D vision that is not yet functional for 2D hybrid imaging. CONCLUSIONS: This cross-modality fusion is doubtless an essential complement for the existing toolkit of a 2D hybrid device. Thus, it would potentially improve the efficiency of diagnosis and therapy for oncology.