Solid-State, Hectogram-Scale Preparation of Red Carbon Dots as Phosphor for Energy-Transfer-Induced High-Quality White LEDs with CRI of 97.

In this study, pre-crystallization-controlled, solid-state preparation of red carbon dots (C-dots) from o-phenylenediamine on a hectogram scale with a 94% yield is reported. Highly efficient red phosphor (C-dots@MCC) is obtained by dispersing the C-dots in microcrystalline cellulose, which matched extremely well with the commercial Y3 Al5 O12 :Ce3+ (YAG) phosphor. White light-emitting diodes (WLEDs) fabricated from the two phosphors emitted warm white light with a correlated color temperature of 3845 K, CIE color coordinates of (0.38, 0.37), and an extremely high color rendering index (CRI) of 95, outperforming all the reported YAG-derived WLEDs. Furthermore, the CRI value of the WLED can be further increased to 97 after fine-tuning, which is the highest CRI for WLEDs of any C-dots derived devices reported so far. The superior performance of the WLED is attributed to a delicate energy transfer between YAG and C-dots@MCC. Most importantly, the WLED maintained excellent stabilities under varied currents, working durations, moistures, and temperatures.

Behavioral and psychosocial factors and their effects on insomnia among people undergoing entry quarantine in hotels during COVID-19 pandemic: a cross-sectional study in Guangzhou, China.

BACKGROUND: The COVID-19 pandemic continues to impact global health and China requires a 14-day quarantine for individuals on flights with positive COVID-19 cases. This quarantine can impact mental well-being, including sleep. This study aims to examine the impact of psychosocial and behavioral factors on insomnia among individuals undergoing quarantine in hotels. METHODS: This study was a cross-sectional survey carried out in Guangzhou, China. The data was gathered through online questionnaires distributed to international passengers who arrived in Guangzhou on flights and were required to undergo a 14-day quarantine in hotels arranged by the local government. The questionnaires were sent to the participants through the government health hotline "12,320." RESULTS: Of the 1003 passengers who were quarantined, 6.7% reported significant anxiety and 25.0% had varying degrees of insomnia. Anxiety was positively associated with insomnia (ß = 0.92, P < 0.001), while collectivism (ß = -0.07, P = 0.036), indoor exercise (ß = -0.50, P < 0.001), and the perceived people orientation of the public health service (ß = -0.20, P = 0.001) were negatively associated with insomnia. The study also identified moderating effects, such that a higher sense of collectivism, a greater frequency of indoor exercise, and a higher perception of the people-oriented of the public health service were associated with a lower impact of anxiety on insomnia. These moderating effects were also observed in participants with varying degrees of insomnia. CONCLUSIONS: This study reveals that a proportion of people undergoing entry quarantine experience insomnia and confirms how psychosocial and behavioral factors can alleviate insomnia in this population.

Carbon Dots-Based Fluorescence Assay for the Facile and Reliable Detection of Ag+ in Natural Water and Serum Samples.

In this report, red-emissive carbon dots (C-dots) were facilely prepared from o-phenylenediamine via microwave-assisted hydrothermal treatment. The C-dots demonstrated excitation wavelength-independent emission with maximums at 621 nm that could be effectively quenched by Ag+ via static quenching. This phenomenon was exploited to establish a sensitive fluorescence assay with a low detection limit (0.37 µM) and wide linear range (0-50 µM). In addition, this assay demonstrated excellent selectivity toward Ag+, free from the interference of 16 commonly seen metal ions. Most importantly, the assay demonstrated high reliability toward samples in deionized water, mineral water, lake water, and serum, which could indicate potential applications for Ag+ monitoring in complicated natural and biological environments.

Synthesis Mechanisms, Structural Models, and Photothermal Therapy Applications of Top-Down Carbon Dots from Carbon Powder, Graphite, Graphene, and Carbon Nanotubes.

In this study, top-down syntheses of carbon dots (CDs) from four different carbon precursors, namely, carbon nano powders, graphite, graphene, and carbon nanotubes, were carried out. Systematic study demonstrated that the optical properties and surface functionalities of the CDs were quite similar and mainly influenced by the synthesis method, while the sizes, morphologies, chemical compositions, and core structures of the CDs were heavily influenced by the carbon precursors. On the basis of these studies, the formation processes and structural models of these four top-down CDs were proposed. The cell cytotoxicity and photothermal conversion efficiency of these CDs were also carefully evaluated, demonstrating their potential applications in photothermal therapy.

Sensitive, Selective and Reliable Detection of Fe3+ in Lake Water via Carbon Dots-Based Fluorescence Assay.

In this study, C-dots were facilely synthesized via microwave irradiation using citric acid and ethylenediamine as carbon precursors. The fluorescence emissions of the C-dots could be selectively quenched by Fe3+, and the degree of quenching was linearly related to the concentrations of Fe3+ presented. This phenomenon was utilized to develop a sensitive fluorescence assay for Fe3+ detection with broad linear range (0-250, 250-1200 µmol/L) and low detection limit (1.68 µmol/L). Most importantly, the assay demonstrated high reliability towards samples in deionized water, tap water and lake water, which should find potential applications for Fe3+ monitoring in complicated environments.

Quantification of Nucleic Acid Concentration in the Nanoparticle or Polymer Conjugates Using Circular Dichroism Spectroscopy.

The interface of nucleic acids and nanomaterials is among the most promising fields in recent years. Considerable efforts have been devoted to the development of novel systems based on the two components for various promising applications such as sensing, bioimaging, drug delivery, and theranostics. However, the determination of nucleic acid concentration in these systems remains as a challenge due to the interference of nanoparticles. To this end, we developed a simple, yet reliable, method to quantify the nucleic acid concentration in their nanoparticle or polymer conjugates based on circular dichroism (CD) spectroscopy. In this paper, three nucleic acids, namely, DNA sodium salt from calf thymus (NaDNA), DNA from herring sperm (hsDNA), and ribonucleic acid from torula yeast (tyRNA), were noncovalently conjugated to three nanoparticles. The concentrations of the three nucleic acids in their nanoparticle conjugates were successfully determined on the basis of CD spectra calibration curves.

Photoluminescent Carbon Dots: A Mixture of Heterogeneous Fractions.

Photoluminescent carbon dots (CDs) fractions have been isolated from a gel-like material (GM), which was synthesized using a convenient one-step solvothermal route. In terms of purification, size exclusion chromatography (SEC) and dialysis were compared with acetone wash, which revealed the advantage of acetone wash. The pre-purified GM with acetone wash (A-GM) was further isolated by the reversed-phase preparative thin layer chromatography (TLC) with acetonitrile-water mixture (7 : 3; va /vw ) as the developing solvent. As a result, there were four photoluminescent bands on the TLC plate, which indicated the presence of four photoluminescent fractions. Detailed characterization measurements such as UV/Vis absorption, fluorescence emission, attenuated total reflection Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential, dynamic light scattering, atomic force microscopy, and TEM measurements were performed on all fractions to analyze their heterogeneous optical, structural, electrical, and morphological properties. Considering the comprehensive analysis, all isolated fractions were CDs. In addition, excitation wavelength-independent CDs were obtained with a mean size of 2.5 nm and high quantum yield (55 %). Furthermore, the study demonstrates that the excitation wavelength-dependent photoluminescence of GM could result from the mixture of different surface states of each CD fraction rather than multiple surface states of uniform CDs nanoparticles.

Cancer Targeting and Drug Delivery Using Carbon-Based Quantum Dots and Nanotubes.

Currently cancer treatment is in large part non-specific with respect to treatment. Medication is often harsh on patients, whereby they suffer several undesired side effects as a result. Carbon-based nanoparticles have attracted attention in recent years due to their ability to act as a platform for the attachment of several drugs and/or ligands. Relatively simple models are often used in cancer research, wherein carbon nanoparticles are conjugated to a ligand that is specific to an overexpressed receptor for imaging and drug delivery in cancer treatment. These carbon nanoparticles confer unique properties to the imaging or delivery vehicle due to their nontoxic nature and their high fluorescence qualities. Chief among the ongoing research within carbon-based nanoparticles emerge carbon dots (C-dots) and carbon nanotubes (CNTs). In this review, the aforementioned carbon nanoparticles will be discussed in their use within doxorubicin and gemcitabine based drug delivery vehicles, as well as the ligand-mediated receptor specific targeted therapy. Further directions of research in current field are also discussed.

Method To Determine Protein Concentration in the Protein-Nanoparticle Conjugates Aqueous Solution Using Circular Dichroism Spectroscopy.

Considerable efforts have been made to synthesize and characterize protein-nanoparticle conjugates (protein-NPs) for their promising applications in bionanotechnology. However, protein concentration determination in the protein-NPs has so far not been reported. In this Letter, we present a simple and nondestructive approach to quantify the protein concentration in the protein-NPs aqueous solution using circular dichroism (CD) spectroscopy. Carbon dots (∼4 nm), gold nanoparticles (∼10 nm), and polyethylene glycol (PEG, molecular weight ∼3000) were either physically mixed or covalently conjugated (not in the case of gold nanoparticles) with proteins (human transferrin, human serum albumin, and ovalbumin). We were able to quantify the protein concentration in the protein-nanoparticle conjugates using a calibration curve from the CD spectra.

Effect of airflow rate on droplet deposition of an impinging-jet inhaler in the human respiratory tract.

This paper presents a numerical investigation to understand the transport and deposition of sprays emitted by an impinging-jet inhaler in the human respiratory tract under different inhalation flow rates. An injection model is used for the numerical simulations considering the spreading angles of the spray in the two directions, which are measured from experiments. The model parameter is adjusted to match the mean droplet size measured in the previous experiment. A time-varying sinusoidal inhalation flow rate is utilized as airflow conditions, which is closer to the actual situation when using an inhaler. The results demonstrate that the inhalation airflow rate significantly affects the spray's transport behavior and deposition results in the respiratory tract. Both excessively high and low inhalation flow rates lead to an increase in deposition in the mouth-throat. A moderate inhalation flow rate reduces throat deposition while maximizing lung deposition. Higher inhalation flow rates enable faster delivery of the droplets to the lungs, whereas lower inhalation flow rates achieve a more uniform deposition over time in the lungs. The amount of deposition in different parts of the lung lobes follows a fixed order. This study provides valuable insights for optimizing the inhalation flow rate conditions of the impinging-jet inhaler for clinical applications.

Experimental Investigation on the Influence of Water on Rockburst in Rock-like Material with Voids and Multiple Fractures.

To investigate the influence of water content on the rockburst phenomena in tunnels with horizontal joints, experiments were conducted on simulated rock specimens exhibiting five distinct levels of water absorption. Real-time monitoring of the entire blasting process was facilitated through a high-speed camera system, while the microscopic structure of the rockburst debris was analyzed using scanning electron microscopy (SEM) and a particle size analyzer. The experimental findings revealed that under varying degrees of water absorption, the specimens experienced three stages: debris ejection; rockburst; and debris spalling. As water content increased gradually, the intensity of rockburst in the specimens was mitigated. This was substantiated by a decline in peak stress intensity, a decrease in elastic modulus, delayed manifestation of pre-peak stress drop, enhanced amplitude, diminished elastic potential energy, and augmented dissipation energy, resulting in an expanded angle of rockburst debris ejection. With increasing water content, the bond strength between micro-particles was attenuated, resulting in the disintegration of the bonding material. Deformation failure was defined by the expansion of minuscule pores, gradual propagation of micro-cracks, augmentation of fluffy fine particles, exacerbation of structural surface damage akin to a honeycomb structure, diminishment of particle diameter, and a notable increase in quantity. Furthermore, the augmentation of secondary cracks and shear cracks, coupled with the enlargement of spalling areas, signified the escalation of deformation failure. Simultaneously, the total mass of rockburst debris gradually diminished, accompanied by a corresponding decrease in the proportion of micro and fine particles within the debris.

Carbon dots as multifunctional fluorescent probe for Fe3+ sensing in ubiquitous water environments and living cells as well as lysine detection via "on-off-on" mechanism.

Iron and amino acids are essential nutrients for living organisms, and their deficiency or excess can cause a range of diseases. Therefore, there is considerable interest in developing sensing assays capable of detecting these nutrients with sensitivity, selectivity, and multifunctionality even in complex environments. In this report, hydrothermally synthesized blue fluorescent carbon dots (C-dots) from zinc gluconate were utilized for the detection of Fe3+ and lysine via "on-off" and "on-off-on" mechanisms, respectively. Specifically, the Fe3+ sensing assay achieved a broad linear range of 0-200 µM and a low limit of detection (LOD) of 1.9 µM. It is worth mentioning that the assay was also well adapted to natural aqueous environments (e.g., lake water), and its linear detection range could be extended to 0-1000 µM with a LOD of 3.3 µM. Furthermore, the assay was also effective for intracellular Fe3+ tracking. Most importantly, the assay could also be applied for the quantitative detection of lysine with a linear range of 0-1200 µM and LOD of 8.6 µM. Systematic mechanistic studies revealed that Fe3+ sensing was based on a static quenching process between C-dots and Fe3+, whereas a stronger complexation might have formed between Fe3+ and Lys, leading to the release of C-dots and thus the recovery of fluorescence.

Applications of helical-chiral pyridines as organocatalysts in asymmetric synthesis.

A new family of chiral pyridines has been designed and synthesized for use in asymmetric organocatalysis. Thus, helical-chiral pyridines induce high enantioselectivity in a range of mechanistically unrelated, synthetically significant transformations, including Friedel-Crafts alkylation with nitroalkenes, periselective Diels-Alder reactions with nitroalkenes, the ring-opening of epoxides with a chloride nucleophile, and the propargylation of aldehydes.

Enantio- and periselective nitroalkene Diels-Alder reactions catalyzed by helical-chiral hydrogen bond donor catalysts.

Helical-chiral double hydrogen bond donor catalysts promote the nitroalkene Diels-Alder reaction in an enantio- and periselective manner. This represents the first asymmetric catalytic nitroalkene Diels-Alder reaction via LUMO-lowering catalysis. To gain an insight into this new process, the substrate scope of our catalyst was investigated by exploiting readily available 5-substituted pentamethylcyclopentadienes. The catalyst was found to tolerate dienes with different steric demands as well as dienes substituted with heteroatoms. The synthetic utility of 5-substituted pentamethylcyclopentadienes is rather limited, and thus we have developed a three-step route to 1,4,5,5-tetrasubstituted cyclopentadienes from commercially available ketones.

Indocyanine green derived carbon dots with significantly enhanced properties for efficient photothermal therapy.

A simple yet effective strategy to enhance the properties of traditional dye indocyanine green (ICG) in all aspects was proposed and demonstrated. Specifically, indocyanine green-derived carbon dots (ICGCDs) were synthesized from ICG via a simple hydrothermal treatment. The ICGCDs exhibited significantly enhanced thermal stability and anti-photobleaching compared to ICG. Furthermore, their photothermal properties were also notably strengthened, in which a wider functional pH range, 50% improvement in photothermal conversion efficiency and superior photothermal cyclability were achieved. Thanks to these superior properties, ICGCDs were demonstrated as efficient NIR bioimaging and photothermal agents in both in vitro and in vivo experiments. Most excitingly, the strategy demonstrated in this study is likely to have broad applications in other systems.

Hydrothermal vs microwave nanoarchitechtonics of carbon dots significantly affects the structure, physicochemical properties, and anti-cancer activity against a specific neuroblastoma cell line.

Carbon dots (CDs) from glucose were synthesized using two of the most common bottom-up methods, namely, microwave assisted (MW) and hydrothermal carbonization (HT). Synthetic parameters such as reaction time, temperature, and precursor concentration were changed to study the effects of each parameter on CD size, structure, surface functionalities, charge, photoluminescence behavior, quantum yield, cytotoxicity, blood-brain barrier (BBB) crossing ability and bioimaging. A detailed analysis is performed to compare the structure and properties of the CDs synthesized in ten different conditions. We show that the synthesis route drastically changes the structure, properties, and related functions of glucose-derived CDs yielding two different subtypes of CDs. Surprisingly, CDs that was synthesized via HT method showed specific anticancer activity against a neuroblastoma cell line while being non-toxic towards healthy cell lines, indicating significant potential for therapeutic applications. CDs synthesized via MW crosses the BBB in zebrafish and rat models, and accumulates in neurons. CDs synthesized via MW method showed high biocompatibility and a great potential to be used for bioimaging applications in vitro and in vivo targeting neurons. Finally, a formation mechanism of CDs is proposed for both HT and MW synthesis routes.

Ferulic acid regulates miR-17/PTEN axis to inhibit LPS-induced pulmonary microvascular endothelial cells apoptosis through activation of PI3K/Akt pathway.

Acute lung injury (ALI) is mainly mediated by the damage of pulmonary microvascular endothelial cells (PMVECs). LPS is one of the pathogenic factors leading to microcirculatory abnormalities of ALI. Ferulic acid (FA) exhibits therapeutic effects against various diseases. During lipopolysaccharide-induced acute respiratory distress syndrome, FA, when given beforehand, could depress inflammation and oxidative stress. However, the concrete role and underlying mechanism of FA in ALI have not been well characterized. Ten µg/mL Lipopolysaccharide (LPS) was used to treat rat PMVECs for 24 hr. qRT-PCR was used to detect the level of miR-17 and phosphatase and tensin homolog deleted on chromosome ten (PTEN). Western blot was used to analyze the associated proteins in the PI3K/Akt pathway, and the apoptosis-related proteins. Flow cytometric analysis was performed to detect the apoptosis of PMVECs. MTT assay was constructed to detect the cell viability. Luciferase assay was conducted to detect the target gene of miR-17 and PTEN. A cell model for in vitro studying the role of FA in ALI was established using PMVECs. Our data demonstrate that FA up-regulates miR-17 and declines apoptosis induced by LPS. FA inhibits apoptosis mediated by up-regulating miR-17. Furthermore, we found miR-17 targeted PTEN negatively. FA inhibits cleaved caspase-3 and Bax expression through the PI3K/Akt pathway mediated by up-regulating miR-17. Over-expression of PTEN could contribute to the similar expression trend of the PI3K/Akt signal pathway protein compared to miR-17 inhibitor transfected cells. FA inhibits PMVECs apoptosis induced by LPS via miR-17/PTEN to further regulate the activation of the PI3K/Akt pathway in ALI. We anticipate that our data will provoke additional studies for ALI clinical therapy.

Carbon dot composites for bioapplications: a review.

Carbon dots (CDs) have received extensive attention in the last decade for their excellent optical, chemical and biological properties. In recent years, CD composites have also received significant attention due to their ability to improve the intrinsic properties and expand the application scope of CDs. In this article, the synthesis processes of four types of CD composites (metal-CD, nonmetallic inorganics-CD, and organics-CD as well as multi-components-CD composites) are systematically summarized first. Then the recent advancements in the bioapplications (bioimaging, drug delivery and biosensing) of these composites are also highlighted and discussed. Last, the current challenges and future trends of CD composites in biomedical fields are discussed.

An insight into embryogenesis interruption by carbon nitride dots: can they be nucleobase analogs?

The carbon nitride dot (CND) is an emerging carbon-based nanomaterial. It possesses rich surface functional moieties and a carbon nitride core. Spectroscopic data have demonstrated the analogy between CNDs and cytosine/uracil. Recently, it was found that CNDs could interrupt the normal embryogenesis of zebrafish. Modifying CNDs with various nucleobases, especially cytosine, further decreased embryo viability and increased deformities. Physicochemical property characterization demonstrated that adenine- and cytosine-incorporated CNDs are similar but different from guanine-, thymine- and uracil-incorporated CNDs in many properties, morphology, and structure. To investigate the embryogenesis interruption at the cellular level, bare and different nucleobase-incorporated CNDs were applied to normal and cancerous cell lines. A dose-dependent decline was observed in the viability of normal and cancerous cells incubated with cytosine-incorporated CNDs, which matched results from the zebrafish embryogenesis experiment. In addition, nucleobase-incorporated CNDs were observed to enter cell nuclei, demonstrating a possibility of CND-DNA interactions. CNDs modified by complementary nucleobases could bind each other via hydrogen bonds, which suggests nucleobase-incorporated CNDs can potentially bind the complementary nucleobases in a DNA double helix. Nonetheless, neither bare nor nucleobase-incorporated CNDs were observed to intervene in the amplification of the zebrafish polymerase-alpha 1 gene in quantitative polymerase chain reactions. Thus, in conclusion, the embryogenesis interruption by bare and nucleobase-incorporated CNDs might not be a consequence of CND-DNA interactions during DNA replication. Instead, CND-Ca2+ interactions offer a plausible mechanism that hindered cell proliferation and zebrafish embryogenesis originating from disturbed Ca2+ homeostasis by CNDs. Eventually, the hypothesis that raw or nucleobase-incorporated CNDs can be nucleobase analogs proved to be invalid.

Facile and Sensitive Detection of Nitrogen-Containing Organic Bases with Near Infrared C-Dots Derived Assays.

In this article, we have designed both colorimetric (including solution and test paper type) and spectral sensors (including UV-vis and PL type) for the quick and sensitive detection of general nitrogen-containing organic bases (NCOBs); the limit of detection could reach as low as 0.50 nM. NCOBs included 11 examples, covering aliphatic and aromatic amines, five- and six-membered heterocyclics, fused-ring heterocyclics, amino acids, and antibiotics. Furthermore, the assays demonstrated high reliability in sensing NCOBs and excellent ability to distinguish NCOBs from oxygen and sulfur containing organics. The assays developed could find important applications for the detection of NCOBs in the fields of biomedicine, chemistry, and agriculture.