RESUMO
The anaerobic biodegradation of ethanol-glycol ether mixtures as 1-ethoxy-2-propanol (E2P) and 1-methoxy-2-propanol (M2P), widely used in printing facilities, was investigated by means of two laboratory-scale anaerobic bioreactors at 25oC: an expanded granular sludge bed (EGSB) reactor and an anaerobic hybrid reactor (AHR), which incorporated a packed bed to improve biomass retention. Despite AHR showed almost half of solid leakages compared to EGSB, both reactors obtained practically the same performance for the operating conditions studied with global removal efficiencies (REs) higher than 92% for organic loading rates (OLRs) as high as 54â¯kg of chemical oxygen demand (COD) m-3 d-1 (REs of 70% and 100% for OLRs of 10.6 and 8.3â¯kg COD m-3 d-1 for E2P and M2P, respectively). Identified byproducts allowed clarifying the anaerobic degradation pathways of these glycol ethers. Thus, this study shows that anaerobic scrubber can be a feasible treatment for printing emissions.
Assuntos
Etanol , Éter , Eliminação de Resíduos Líquidos , Anaerobiose , Reatores Biológicos , Éteres , EsgotosRESUMO
A process-simulation model for a novel process consisted of an anaerobic bioscrubber was developed in Aspen Plus®. A novel approach was performed to implement the anaerobic reactor in the simulation, enabling it to be connected to the scrubber. The model was calibrated and validated using data from an industrial prototype that converted air emissions polluted with volatile organic compounds with an average daily concentration of 1129â¯mgC Nm-3 into bioenergy for more than one year. The scrubber, which showed a removal efficiency within 83-93%, was successfully predicted with an average absolute relative error of 5.2⯱â¯0.08% using an average height-to-theoretical-plate value of 1.05⯱â¯0.08â¯m and 1.37⯱â¯0.11â¯m for each of the two commercial packing materials used, respectively. The anaerobic reactor, which treated up to 24â¯kg of chemical oxygen demand m-3 d-1 with efficiencies of about 93%, was accurately simulated, both in effluent-stream characteristics and in the biogas stream. For example, the average absolute error between the experimental biogas production and the model values was 19.6⯱â¯18.9%. The model proved its capability as a predictive tool and an aid in design, resulting in savings of time and money for practitioners. In addition, the approach proposed can be expanded to other bioprocesses that include unit operations.
Assuntos
Biocombustíveis , Compostos Orgânicos Voláteis , Anaerobiose , Reatores Biológicos , MetanoRESUMO
A novel process consisted of an anaerobic bioscrubber was studied at the field scale for the removal of volatile organic compounds (VOCs) emitted from a printing press facility. The pilot unit worked under high fluctuating waste gas emissions containing ethanol, ethyl acetate, and 1-ethoxy-2-propanol as main pollutants, with airflows ranging between 184 and 1253 m3 h-1 and an average concentration of 1126 ± 470 mg-C Nm-3. Three scrubber configurations (cross-flow and vertical-flow packings and spray tower) were tested, and cross-flow packing was found to be the best one. For this packing, daily average values of VOC removal efficiency ranged between 83% and 93% for liquid to air volume ratios between 3.5·10-3 and 9.1·10-3. Biomass growth was prevented by periodical chemical cleaning; the average pressure drop was 165 Pa m-1. Rapid initiation of anaerobic degradation was achieved by using granular sludge from a brewery wastewater treatment plant. Despite the intermittent and fluctuating organic load, the expanded granular sludge bed reactor showed an excellent level of performance, reaching removal efficiencies of 93 ± 5% at 25.1 ± 3.2 °C, with biogas methane content of 94 ± 3% in volume. Volatile fatty acid concentration was as low as 200 mg acetic acid L-1 by treating daily average organic loads up to 3.0 kg COD h-1, equivalent to 24 kg COD m-3 bed d-1. The denaturing gradient gel electrophoresis (DGGE) results revealed the initial shift of the domains Archaea and Bacteria associated with the limitation of the carbon source to a few organic solvents. The Archaea domain was more sensitive, resulting in a drop of the Shannon index from 1.07 to 0.41 in the first 123 days. Among Archaea, the predominance of Methanosaeta persisted throughout the experimental period. The increase in the proportion of Methanospirillum and Methanobacterium sp. was linked to the spontaneous variations of operating temperature and load, respectively. Among Bacteria, high levels of ethanol degraders (Geobacter and Pelobacter sp.) were observed during the trial.
Assuntos
Reatores Biológicos , Impressão , Compostos Orgânicos Voláteis , Eliminação de Resíduos Líquidos , Anaerobiose , Metano , EsgotosRESUMO
Two laboratory-scale expanded granular sludge bed (EGSB) reactors were operated at 18 and 25 °C, respectively, for the treatment of synthetic wastewater composed of ethanol and 1-methoxy-2-propanol (M2P) in a mass ratio of 4:1. Reactors were operated first with continuous wastewater supply and after with discontinuous substrate supply (5 days a week, 16 h a day) to simulate shift working conditions. Under continuous wastewater supply chemical oxygen demand (COD), removal efficiency higher than 95 % was achieved at the end of the trial applying organic loading rates (OLR) of 29 and 43 kg COD m(-3) day(-1) at 18 and 25 °C; thus, corresponding to M2P OLR of 6.4 and 9.3 kg COD m(-3) day(-1), respectively. During intermittent supply of substrate, good performance was recorded at both temperatures with an OLR of 30 kg COD m(-3) day(-1) (M2P OLR of 6.6 kg COD m(-3) day(-1)). After 56 h without substrate supply, a decline in methane yield of 15-30 % was observed due to the deactivation of the biomass. Specific methanogenic activity (SMA) assays were carried out at the end of the experiments. SMA values using 1-methoxy-2-propanol as substrate were 24.3 and 7.8 ml CH4 gVSS(-1) day(-1) at 25 °C and at 18 °C, respectively. This is the first attempt to investigate the removal of 1-methoxy-2-propanol by EGSB reactors.
Assuntos
Reatores Biológicos/microbiologia , Propilenoglicóis/metabolismo , Águas Residuárias/microbiologia , Purificação da Água/métodos , AnaerobioseRESUMO
The study of an industrial unit of biotrickling filter for the treatment of the exhaust gases of a flexographic facility was investigated over a 2-year period with the objective to meet the volatile organic compound (VOC) regulatory emission limits. Increasing the water flow rate from 2 to 40 m(3) h(-1) improved the performance of the process, meeting the VOC regulation when 40 m(3) h(-1) were used. An empty bed residence time (EBRT) of 36 s was used when the inlet air temperature was 18.7 °C, and an EBRT as low as 26 s was set when the inlet temperature was 26.8 °C. During this long-term operation, the pressure drop over the column of the bioreactor was completely controlled avoiding clogging problems and the system could perfectly handle the non-working periods without VOC emission, demonstrating its robustness and feasibility to treat the emission of the flexographic sector.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/prevenção & controle , Reatores Biológicos , Filtração/instrumentação , Impressão , Compostos Orgânicos Voláteis/análise , Pressão , EsgotosRESUMO
The effect of using ground tire rubber (GTR) as an adsorptive material in the removal of a 2:1:1 weight mixture of n-butyl acetate, toluene and m-xylene by using a peat biofilter under different intermittent conditions was investigated. The performance of two identical size biofilters, one packed with fibrous peat alone and the other with a 3:1 (vol) fibrous peat and GTR mixture, was examined for a period of four months. Partition coefficients of both materials were measured. Values of 53, 118 and 402 L kg(-1) were determined for n-butyl acetate, toluene and m-xylene in peat, respectively; and values of 40, 609 and 3035 L kg(-1) were measured for the same compounds in GTR. Intermittent load feeding of 16 h per day, 5 days per week working at an EBRT of 60 s and an inlet VOC concentration of 0.3 g C m(-1), resulted in removal efficiencies higher than 90% for both biofilters, indicating that the addition of GTR did not adversely affect the behavior of the bioreactor. Full removal of n-butyl acetate was obtained for both biofilters. GTR improved the removal of the aromatics in the first part of the biofilter, facilitating lower penetration of the toluene and m-xylene into the bed. A 31-day starvation period was applied and intermittent operation subsequently restarted. In both biofilters, high removal efficiencies after a re-acclimation period of two days were achieved. A shock loading test related to 1-h peaks of three- and four-fold increases in its baseline concentration (0.30 g C m(-3)) was applied in both biofilters. For the biofilter packed with the peat and GTR mixture, attenuation greater than 60% was observed in the maximum outlet concentration when compared to the biofilter packed with peat alone.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/prevenção & controle , Filtração/métodos , Borracha/química , Solo/química , Compostos Orgânicos Voláteis/análise , Acetatos/análise , Adsorção , Cromatografia Gasosa , Tolueno/análise , Xilenos/análiseRESUMO
In order to investigate suitable packing materials, a soil amendment composed of granular high mineralized peat (35% organic content) locally available has been evaluated as carrier material for biofiltration of volatile organic compounds in air by comparison with a fibrous peat (95% organic content). Both supports were tested to eliminate ethylbenzene from air streams in laboratory-scale reactors inoculated with a two-month conditioned culture. In pseudo-steady state operation, experiments at various ethylbenzene inlet loads (ILs) were carried out. Maximum elimination capacity of about 120 g m(-3) h(-1) for an IL of 135 g m(-3) h(-1) was obtained for the fibrous peat. The soil amendment reactor achieved a maximum elimination capacity of about 45 g m(-3) h(-1) for an inlet load of 55 g m(-3) h(-1). Ottengraf-van den Oever model was applied to the prediction of the performance of both biofilters. The influence of gas flow rate was also studied: the fibrous peat reactor kept near complete removal efficiency for empty bed residence times greater than 1 min. For the soil amendment reactor, an empty bed residence time greater than 2 min was needed to achieve adequate removal efficiency. Concentration profiles along the biofilter were also compared: elimination occurred in the whole fibrous peat biofilter, while in the soil amendment reactor the biodegradation only occurred in the first 65% part of the biofilter. Results indicated that soil amendment material, previously selected to increase the organic content, would have potential application as biofilter carrier to treat moderate VOC inlet loads.
Assuntos
Derivados de Benzeno/isolamento & purificação , Filtração/métodos , Solo/análise , Filtração/instrumentação , Modelos Teóricos , EspanhaRESUMO
Activated Sludge Model No. 2d (ASM2d) was validated with data obtained from pilot scale plant treating municipal wastewater from the city of Valencia (Spain). First of all, ASM2d was calibrated using experimental data from anaerobic, anoxic and aerobic batches. A set of kinetic and stoichiometric parameters resulted from these assays. Differences between the values obtained and default values proposed in ASM2d can be explained by the presence of glycogen accumulating organisms (GAOs). The calibrated model was then used to simulate results from a pilot plant. Simulation using the set of parameters obtained accurately reproduces experimental results. This paper also presents a detailed procedure to estimate kinetic and stoichiometric parameters for heterotrophic, autotrophic and polyphosphate accumulating bacteria.
Assuntos
Modelos Teóricos , Esgotos/microbiologia , Bactérias Aeróbias/metabolismo , Bactérias Anaeróbias/metabolismo , Reatores Biológicos , Calibragem , Humanos , Nitrogênio/análise , Fósforo/análise , Reprodutibilidade dos Testes , Esgotos/análise , EspanhaRESUMO
Laboratory bench-scale experiments were conducted to investigate the performance of primary sludge fermentation for volatile fatty acids production. Primary sludges from two major wastewater treatment plants located in Valencia (Pinedo and Carraixet) were used. Experiments were performed at solids retention times between 4 and 10 days, and total volatile solids concentrations between 0.6% and 2.8%. Operation at two temperatures (20 degrees C and 30 degrees C) was also checked. Results indicated the importance of feed sludge characteristics on volatile fatty acids yields, being approximately double for the Carraixet wastewater treatment plant sludge than for the Pinedo plant. In both cases, higher volatile fatty acids yields were observed at higher total volatile solids concentrations. Solids retention times above 6 days scarcely improve volatile fatty acids yields, while experiments conducted at 4 days of solids retention times show an important decrease in volatile fatty acids yields. On raising temperature an increase in volatile fatty acids yields was observed, mainly due to an improvement in the hydrolysis of particulate organic matter.
Assuntos
Ácidos Graxos/metabolismo , Modelos Teóricos , Esgotos/química , Reatores Biológicos , Fermentação , Humanos , Temperatura , Fatores de Tempo , VolatilizaçãoRESUMO
In this paper, several tuning algorithms, specifically ITAE, IMC and Cohen and Coon, were applied in order to tune an activated sludge aeration PID controller. Performance results of these controllers were compared by simulation with those obtained by using a nonlinear fuzzy PID controller. In order to design this controller, a trial and error procedure was used to determine, as a function of error at current time and at a previous time, sets of parameters (including controller gain, integral time and derivative time) which achieve satisfactory response of a PID controller actuating over the aeration process. Once these sets of data were obtained, neural networks were used to obtain fuzzy membership functions and fuzzy rules of the fuzzy PID controller.