Enhanced Photocatalytic Activities of Sodium Borohydride-Calcined Magnetic Manganese Ferrite Nanoparticles.

The synthesis, enhancement, and maintenance of magnetite-based catalyst nanoparticles (NPs) are important for photocatalytic activity and recovery rates. We used a sodium borohydride (NaBH4) calcination method to modify MnFe2O4 nanoparticles to optimize their performance in the photocatalytic oxidation of 2,5-hydroxymethylfurfural. The results indicated a 94% increase in photocatalytic efficiency, while magnetic assessments performed using a vibrating sample magnetometer showed an 8.9% improvement in magnetic properties without degradation. These findings show the dual benefits of increased photocatalytic performance with strong magnetic properties, which are important for the application and reusability of photocatalysts. The recycling of these photocatalysts reduces secondary pollution and increases the process cost-effectiveness. These results contribute to the solution of problems with the use of photocatalytic materials.

Revealing Photocatalytic Performance of ZnxCd1-xS Nanoparticles Depending on the Irradiation Wavelength.

Photocatalysts are useful for various applications, including the conservation and storage of energy, wastewater treatment, air purification, semiconductors, and production of high-value-added products. Herein, ZnxCd1-xS nanoparticle (NP) photocatalysts with different concentrations of Zn2+ ions (x = 0.0, 0.3, 0.5, or 0.7) were successfully synthesized. The photocatalytic activities of ZnxCd1-xS NPs varied with the irradiation wavelength. X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and ultraviolet-visible spectroscopy were used to characterize the surface morphology and electronic properties of the ZnxCd1-xS NPs. In addition, in situ X-ray photoelectron spectroscopy was performed to investigate the effect of the concentration of Zn2+ ions on the irradiation wavelength for photocatalytic activity. Furthermore, wavelength-dependent photocatalytic degradation (PCD) activity of the ZnxCd1-xS NPs was investigated using biomass-derived 2,5-hydroxymethylfurfural (HMF). We observed that the selective oxidation of HMF using ZnxCd1-xS NPs resulted in the formation of 2,5-furandicarboxylic acid via 5-hydroxymethyl-2-furancarboxylic acid or 2,5-diformylfuran. The selective oxidation of HMF was dependent on the irradiation wavelength for PCD. Moreover, the irradiation wavelength for the PCD depended on the concentration of Zn2+ ions in the ZnxCd1-xS NPs.

Performance Promotion of Multipurpose Catalysts Using Increased Oxygen Vacancy Amounts by Charge-Mismatched Doping.

Modulating the oxygen vacancy (V0) in nanostructures has opened a new avenue for efficient catalyst design, facilitating biomass oxidation reactions and electrocatalytic properties. In this study, we have investigated the properties of NiO-based catalysts with varying degrees of V0 achieved through ion doping of the catalyst with cations of different oxidation states (TM3+) or the same valence state (TM2+) as Ni2+ in the NiO matrix. By introducing charge-mismatched dopants, we enhanced the concentration of V0 in the NiO catalyst, resulting in remarkable selectivity (∼50%) for the conversion of 2,5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), as well as a lower overpotential in the oxygen evolution reaction (OER). We believe that charge-mismatched doping offers a novel avenue for optimizing defect engineering in oxide-based catalysts, which can enable more efficient biomass conversion and water splitting. These findings have made a significant contribution to the field of multipurpose catalysis and hold the potential to inspire new catalyst designs that would usher in a more sustainable future.

Enhancement of Sulfur Source-Dependent Zn Vacancies in Different Photocatalytic Performances of ZnIn2S4 Nanoparticles.

This study focuses on the synthesis and investigation of ZnIn2S4 nanoparticle (NP) photocatalysts treated with different sulfur sources, thioacetamide (TAA), or thiourea (TU), to explore their wavelength-dependent photocatalytic activity. The research aims to understand the impact of Zn vacancies present on the surface of ZnIn2S4 NPs. The investigation involves electron spin resonance and in situ X-ray photoelectron spectroscopy to study the photocatalytic activity of ZnIn2S4-TU and ZnIn2S4-TAA NPs, following the characterization of surface morphology and electronic properties using high-resolution transmission electron microscopy and X-ray diffraction. Additionally, the study delves into the wavelength-dependent photocatalytic degradation (PCD) activity of the ZnIn2S4 NPs using 2,5-hydroxymethylfurfural (HMF) across a wide range. Notably, the selective oxidation of HMF using ZnIn2S4-TU NPs resulted in the formation of 2,5-furandicarboxylic acid (FDCA) via 2,5-diformylfuran, with an efficiency exceeding 40% over the broad wavelength range. The research demonstrates that the irradiation wavelength for PCD is influenced by the number of defect structures introduced into the ZnIn2S4 NPs through the sulfur source.

Selective Oxidation of Biomass Molecules via ZnO Nanoparticles Modified Using Charge Mismatch of the Doped Co ions.

A charge mismatch between transition-metal-ion dopants and metal oxide nanoparticles (MO NPs) within an engineered complex engenders a significant number of oxygen vacancies (VO) on the surface of the MO NP construct. To elucidate in-depth the mechanism of this tendency, Co ions with different charge states (Co3+ and Co2+) were doped into ZnO NPs, and their atomic structural changes were correlated with their photocatalytic efficiency. We ascertained that the increase of the Zn-O bond distances was distinctly affected by Co3+-ion doping, and, subsequently, the number of VO was noticeably increased. We further investigated the mechanistic pathways of the photocatalytic oxidation of 2,5-hydroxymethylfurfural (HMF), which have been widely investigated as biomass derivatives because of their potential use as precursors for the synthesis of sustainable alternatives to petrochemical substances. To identify the reaction products in each oxidation step, selective oxidation products obtained from HMF in the presence of pristine ZnO NPs, Co3+- and Co2+-ion-doped ZnO NPs were evaluated. We confirmed that Co3+-ion-doped ZnO NPs can efficiently and selectively oxidize HMF with a good conversion rate (∼40%) by converting HMF to 2,5-furandicarboxylic acid (FDCA). The present study demonstrates the feasibility of improving the production efficiency of FDCA (an alternative energy material) by using enhanced photocatalytic MO NPs with the help of the charge mismatch between MO and metal-ion dopants.

Photocatalysis of Cr- and Fe-Doped CeO2 Nanoparticles to Selective Oxidation of 5-Hydroxymethylfurfural.

Oxygen vacancies (Vo) present in CeO2 nanoparticles (NPs) can effectively boost their photocatalytic activity under ultraviolet (UV) light. To improve photocatalytic performance, Cr- and Fe-doped CeO2 NPs with increased Vo were prepared using a simple method of doping Cr and Fe ions into CeO2 NPs, which was confirmed by an in-depth analysis of the structural and electronic changes. Through photocatalytic degradation (PCD) experiments with 5-hydroxymethylfurfural (HMF), we found that the PCD rates of the two doped CeO2 NPs were faster than that of the CeO2 NPs. In addition, the conversion of HMF to 2,5-furandicarboxylic acid (FDCA) using the doped CeO2 NPs occurred only through the mechanism of the selective oxidation to 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), exhibiting better efficiency than using CeO2 NPs.

Verifying the relationships of defect site and enhanced photocatalytic properties of modified ZrO2 nanoparticles evaluated by in-situ spectroscopy and STEM-EELS.

Base treatment and metal doping were evaluated as means of enhancing the photocatalytic activity of ZrO2 nanoparticles (NPs) via the generation of oxygen vacancies (OvS), and the sites responsible for this enhancement were identified and characterized by spectroscopic and microscopic techniques. We confirmed that OvS produced by base treatment engaged in photocatalytic activity for organic pollutant degradation, whereas surface defects introduced by Cr-ion doping engaged in oxidative catalysis of molecules. Moreover, we verified that base-treated ZrO2 NPs outperformed their Cr-ion doped counterparts as photocatalysts using in situ X-ray photoelectron spectroscopy and scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS). Thus, our study provides valuable information on the origin of the enhanced photocatalytic activity of modified ZrO2 NPs and demonstrates the practicality of in situ spectroscopy and STEM-EELS for the evaluation of highly efficient metal oxide photocatalysts.