RESUMO
Abnormal bone turnover is common in CKD, but its effects on bone quality remain unclear. We qualitatively screened iliac crest bone specimens from patients on dialysis to identify those patients with low (n=18) or high (n=17) bone turnover. In addition, we obtained control bone specimens from 12 healthy volunteers with normal kidney function. In the patient and control specimens, Fourier transform infrared spectroscopy and nanoindentation quantified the material and mechanical properties of the specimens, and we used bone histomorphometry to assess parameters of bone microstructure and bone formation and resorption. Compared with high or normal turnover, bone with low turnover had microstructural abnormalities such as lower cancellous bone volume and reduced trabecular thickness. Compared with normal or low turnover, bone with high turnover had material and nanomechanical abnormalities such as reduced mineral to matrix ratio and lower stiffness. These data suggest that turnover-related alterations in bone quality may contribute to the diminished mechanical competence of bone in CKD, albeit through different mechanisms. Therapies tailored specifically to low- or high-turnover bone may treat renal osteodystrophy more effectively.
Assuntos
Osso e Ossos/metabolismo , Distúrbio Mineral e Ósseo na Doença Renal Crônica/etiologia , Distúrbio Mineral e Ósseo na Doença Renal Crônica/metabolismo , Nefropatias/complicações , Índice de Gravidade de Doença , Adulto , Idoso , Fenômenos Biomecânicos , Biópsia , Densidade Óssea , Osso e Ossos/patologia , Estudos de Casos e Controles , Doença Crônica , Feminino , Humanos , Nefropatias/terapia , Pessoa de Meia-Idade , Diálise Renal , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Elderly adults should perform exercises that maintain or improve balance to reduce risk of injury from falls. Bone fractures secondary to falls in the elderly, particularly sedentary females, continue to pose a major health and economic problem. A greater understanding of the processes that contribute to the propensity for falling may be obtained by considering changes in gait biodynamics with age and activity level. Therefore, the purpose of this study was to quantify the relationships between age/activity level and selected biodynamic parameters of the lower extremity during normal gait. Seventeen healthy women, 9 young and 8 elderly, were divided into groups of 9 active and 8 sedentary subjects. Three-dimensional (3D) video motion and force platform kinematic and kinetic data were collected from the hip, knee, and ankle of the right lower extremity as the subjects walked at self-selected speeds. Data were analyzed as functions of age and activity level by using a 2-way analysis of variance. As expected, our results show that the elderly group had significantly greater (p < 0.05) functional and mobility limitations in their lower extremity joints than did the younger group. Significant, age-related lower-limb gait alterations were manifested primarily at the ankle, whereas activity-related alterations were manifested most prominently at the hip. The knee showed the fewest changes accompanying age or activity level. Thus, age and activity level affect gait, which may have a role in the subsequent development of a predisposition to gait-related imbalances and resultant falling and increased hip fracture risk. Strength and conditioning professionals may consider these factors related to age and activity level when individualizing exercise regimens for their older, or sedentary, clients. Prophylactic physical activities involving specific, controlled 3D body movements may help prevent abnormal lower-limb joint kinematics (and their hypothetically coupled, intrinsic postural control strategies), thereby reducing fall and fracture propensity.
Assuntos
Marcha/fisiologia , Extremidade Inferior/fisiologia , Atividade Motora/fisiologia , Adulto , Fatores Etários , Idoso , Tornozelo/fisiologia , Fenômenos Biomecânicos , Feminino , Quadril/fisiologia , Humanos , Joelho/fisiologia , Limitação da Mobilidade , Comportamento Sedentário , Gravação em Vídeo , Adulto JovemRESUMO
This study quantified the length, number, and density of microcracks in bone from patients treated with bisphosphonates as a function of duration. Anterior iliac crest bone samples from 51 osteoporotic Caucasian females continuously treated with oral bisphosphonates for 1-16 years were obtained by bone biopsy. Samples were histologically processed and analyzed for bone area, microcrack number, and microcrack length. The analyses used statistical modeling and considered patient age, bone mineral density, bone volume/total volume, trabecular thickness, and bone turnover as potential covariates. Microcrack density (number of microcracks/total examined bone area) was linearly related (p = 0.018) to bisphosphonate treatment duration. None of the analyzed covariates contributed significantly to the observed relationship between microcrack density and bisphosphonate treatment duration. Observed increases in microcrack density with increasing bisphosphonate treatment duration is important because increasing levels of microcracks may not only affect bone remodeling but also reduce elastic modulus and are suspected to adversely affect other mechanical properties that may influence fracture risk. The present findings add to our prior results showing changes in bone material properties and modulus with bisphosphonate treatment duration and thereby provide a more comprehensive assessment of the relationship between bisphosphonate treatment duration and bone quality. Statement of Clinical Significance: The present findings provide information guiding clinical use of oral bisphosphonates for post-menopausal osteoporosis therapy.
Assuntos
Difosfonatos , Fraturas Ósseas , Feminino , Humanos , Difosfonatos/efeitos adversos , Osso Esponjoso/diagnóstico por imagem , Osso Esponjoso/patologia , Fraturas Ósseas/patologia , Densidade Óssea , Osso e Ossos/patologiaRESUMO
Oral bisphosphonates are the primary medication for osteoporosis, but concerns exist regarding potential bone-quality changes or low-energy fractures. This cross-sectional study used artificial intelligence methods to analyze relationships among bisphosphonate treatment duration, a wide variety of bone-quality parameters, and low-energy fractures. Fourier transform infrared spectroscopy and histomorphometry quantified bone-quality parameters in 67 osteoporotic women treated with oral bisphosphonates for 1 to 14 years. Artificial intelligence methods established two models relating bisphosphonate treatment duration to bone-quality changes and to low-energy clinical fractures. The model relating bisphosphonate treatment duration to bone quality demonstrated optimal performance when treatment durations of 1 to 8 years were separated from treatment durations of 9 to 14 years. This may be due to a change in relationship of bone-quality parameters with treatment duration. This model also showed that the effects of bisphosphonate treatment duration were most highly correlated with changes in means and standard deviations of infrared spectroscopically derived mineral and matrix parameters and histomorphometric bone turnover parameters. A second model related treatment duration to bone fracture in all 22 patients who fractured while on treatment with bisphosphonates for more than 8 years. This second model showed that bisphosphonate treatment duration, not hip bone mineral density (BMD), was the most strongly correlated parameter to these low-energy bone fractures. Application of artificial intelligence enabled analysis of large quantities of structural, cellular, mineral, and matrix bone-quality parameters to determine relationships with long-term oral bisphosphonate treatment and fracture. Infrared spectroscopy provides clinically relevant bone-quality information of which bone mineral purity is among the most relevant. Nine or more years of bisphosphonate treatment was associated with abnormal bone mineral purity, matrix abnormalities, and low-energy fractures. These data justify limiting bisphosphonate treatment duration to 8 years. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.
RESUMO
This study aimed to provide quantitative activation data for muscles of the forearm during pronation and supination while using a power grip. Electromyographic data was collected from 15 forearm muscles in 11 subjects while they performed maximal isometric pronating and supinating efforts in nine positions of forearm rotation. Biceps brachii was the only muscle with substantial activation in only one effort direction. It was significantly more active when supinating (µâ¯=â¯52.1%, SDâ¯=â¯17.5%) than pronating (µâ¯=â¯5.1%, SDâ¯=â¯4.8%, pâ¯<â¯.001). All other muscles showed considerable muscle activity during both pronation and supination. Brachioradialis, flexor carpi radialis, palmaris longus, pronator quadratus and pronator teres were significantly more active when pronating the forearm. Abductor pollicis longus and biceps brachii were significantly more active when supinating. This data highlights the importance of including muscles additional to the primary forearm rotators in a biomechanical analysis of forearm rotation. Doing so will further our understanding of forearm function and lead to the improved treatment of forearm fractures, trauma-induced muscle dysfunction and joint replacements.
Assuntos
Antebraço/fisiologia , Força da Mão/fisiologia , Músculo Esquelético/fisiologia , Rotação , Adulto , Eletromiografia , Feminino , Humanos , Masculino , Pronação/fisiologia , Supinação/fisiologiaRESUMO
Acrylic bone cement, based on polymethylmethacrylate (PMMA), is a proven polymer having important applications in medicine and dentistry, but this polymer continues to have less than ideal resistance to mechanical fatigue and impact. A variety of materials have been added to bone cement to augment its mechanical strength, but none of these augmentative materials has proven successful. Carbon nanotubes, a new hollow multiwalled tubular material 10-40 nm in diameter, 10-100 microm long, and 50-100 times the strength of steel at 1/6 the weight, have emerged as a viable augmentation candidate because of their large surface area to volume ratio. The objective of this study was to determine if the addition of multiwall carbon nanotubes to bone cement can alter its static or dynamic mechanical properties. Bar-shaped specimens made from six different (0-10% by weight) concentrations of multiwall carbon nanotubes were tested to failure in quasi-static 3-point bending and in 4-point bending fatigue (5 Hz). Analyses of variance and the 3-Parameter Weibull model were used to analyze the material performance data. The 2 wt % MWNT concentration enhanced flexural strength by 12.8% (p=0.003) and produced a 13.1% enhancement in yield stress (p=0.002). Bending modulus increased slightly with the smaller (<5 wt % MWNT) concentrations, but increased 24.1% (p<0.001) in response to the 10 wt % loading. While the 2 wt % loading produced slightly improved quasi-static test results, it was associated with clearly superior fatigue performance (3.3x increase in the Weibull mean fatigue life). Weibull minimum fatigue life (No), Weibull modulus (alpha), and characteristic fatigue life (beta) for bone cement augmented with carbon nanotubes were enhanced versus that observed in the control group. These data unambiguously showed that the bone cement-MWNT polymer system has an enhanced fatigue life compared to "control" bone cement (no added nanotubes). It is concluded that specific multiwall carbon nanotube loadings can favorably improve the mechanical performance of bone cement.
Assuntos
Materiais Biocompatíveis/química , Cimentos Ósseos/química , Nanotubos de Carbono/química , Polimetil Metacrilato/química , Força Compressiva , Análise de Falha de Equipamento , Teste de Materiais , Nanotubos de Carbono/ultraestrutura , Maleabilidade , Estresse Mecânico , Propriedades de Superfície , Resistência à TraçãoRESUMO
Knowledge of hind foot bone motion is important for understanding gait as well as various foot pathologies, but the three-dimensional (3D) motion of these bones remains incompletely understood. The purpose of this study was to quantify the motion of the talus, calcaneus, navicular, and cuboid in normal adult feet during open chain quasi-static uniplanar plantar flexion motion. Magnetic resonance images of the right feet of six normal young adult males were taken from which 3D virtual models were made of each hind foot bone. The 3D motion of these models was analyzed. Each hind foot bone rotated in the same plane about half as much as the foot (mean 0.54 degrees of bone rotation per degree of foot motion, range 0.40-0.73 degrees per degree of foot motion as measured relative to the fixed tibia). Talar motion was primarily uniaxial, but the calcaneus, navicular, and cuboid bones exhibited biplanar (sometimes triplanar) translation in addition to biaxial rotation. Net translational motions of these bones averaged 0.39 mm of bone translation per degree of foot motion (range 0.06-0.62 mm per degree of foot motion). These data reflect the functional anatomy of the foot, extend the findings of prior studies, provide a standard for comparison to patients with congenital or acquired foot deformities, and establish an objective reference for quantitatively assessing the efficacy of various hind foot therapies.
Assuntos
Articulação do Tornozelo/fisiologia , Ossos do Pé/fisiologia , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética/métodos , Movimento/fisiologia , Amplitude de Movimento Articular/fisiologia , Adolescente , Adulto , Humanos , MasculinoRESUMO
OBJECTIVE: To compare biomechanical properties of currently available plating systems used to reconstruct segmental mandibular defects. DESIGN: Controlled in vitro investigation. SETTING: Academic medical center laboratory. INTERVENTIONS: Thirty-two polyurethane mandibles were equally divided among 4 groups: mandibles with a 4-cm lateral segmental defect that was bridged with a (1) 3.0-mm locking-screw reconstruction plate, (2) 2.4-mm low-profile reconstruction plate, or (3) 2.4-mm reconstruction plate and (4) uncut (control) mandibles. All plates were contoured and secured to the synthetic mandibles with 4 bicortical screws on either side of the defect. Three constructs from each group were subjected to contralateral-molar single-load-to-failure testing. Mean yield displacement, yield load, and bending stiffness were quantified and compared among the 4 groups. The single-load-to-failure data were used to establish conditions for fatigue testing; such testing was then performed on the remaining 5 samples in each group. Mean cycles to failure were measured and compared among the 4 groups. RESULTS: Mean yield displacement, yield load, and bending stiffness were comparable among the plated groups. Both the 3.0-mm locking-screw and 2.4-mm low-profile reconstruction plate designs withstood 1580 and 1124 times more cycles to failure, respectively (P = .005), than did the control group. The other reconstruction plate was also superior to the unplated controls, offering an 865-fold improvement. CONCLUSIONS: All 3 mandibular fixation device systems tested produce comparable levels of single load to failure biomechanical integrity; however, the higher-profile plating system design offered slightly superior fatigue performance. No differences in performance were observed between the locking and nonlocking designs; neither failed at the screw-substrate interface.
Assuntos
Mandíbula/cirurgia , Prótese Mandibular , Fenômenos Biomecânicos , Humanos , Poliuretanos , Desenho de PróteseRESUMO
BACKGROUND: A meniscal repair technique that combines the strength of vertical mattress sutures and the decreased tissue morbidity of an all-inside technique would be advantageous. HYPOTHESIS: The FasT-Fix Meniscal Repair Suture System will provide load at failure, stiffness, and displacement equivalent to that of vertical mattress sutures and superior to that of Meniscus Arrows. STUDY DESIGN: In vitro biomechanical study. METHODS: After repair of a 2-cm vertical longitudinal medial meniscal lesion, three groups of six human cadaveric knees were biomechanically tested in a random order on a servohydraulic device, and three groups of five specimens underwent cyclic loading. RESULTS: Specimens repaired with Meniscus Arrows had reduced load at failure, stiffness, and displacement, but there were no differences between the FasT-Fix and vertical mattress suture methods. During cyclic loading, specimens repaired with two Meniscus Arrows failed before test completion, whereas specimens repaired with two vertical mattress sutures (6.0 +/- 3.7 mm) or with two FasT-Fix implants (5.1 +/- 1.4 mm) maintained fixation with comparable displacements. CONCLUSIONS: The FasT-Fix provided load at failure, stiffness, and displacement comparable with that of vertical mattress sutures. CLINICAL RELEVANCE: The results suggest that the FasT-Fix may be preferable to Meniscus Arrows for meniscal repair with minimal associated tissue morbidity.
Assuntos
Meniscos Tibiais/cirurgia , Técnicas de Sutura , Análise de Variância , Fenômenos Biomecânicos , Cadáver , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estresse MecânicoRESUMO
OBJECTIVE: To determine the biomechanical consequences of cutting one centimeter off the tip of a tibial nail when treating distal tibia fractures with intramedullary nails. DESIGN: Randomized laboratory investigation using matched pairs of cadaveric tibias with osteotomies made to resemble distal tibia fractures extending to four and five centimeters from the tibiotalar joints. INTERVENTION: The smaller (four-centimeter) distal tibias were stabilized using ten-millimeter diameter tibial nails that had been modified by removing the distal one centimeter of the nail. The five-centimeter distal tibias were stabilized with standard ten-millimeter diameter tibial nails. Each tibia was tested in elastic compression, rotation, and compression-bending on a servohydraulic materials testing machine. MAIN OUTCOME MEASUREMENTS: Stiffness was calculated for each type of loading to compare stability of the modified nail construct to that of the standard nail construct. RESULTS: Four-centimeter distal tibia fragments stabilized with modified nails have comparable stiffness in compression and in torsion to five-centimeter distal tibia fragments stabilized with standard tibial nails. The stiffness in compression-bending was surprisingly low in both groups and differed by only 3.7 percent. CONCLUSIONS: Removal of one centimeter from the tip of a tibial nail allows placement of two distal interlocking screws in tibial fractures located four centimeters from the tibiotalar joint. The fixation strength achieved is comparable to that of standard intramedullary nailing of tibial fractures located five centimeters from the tibiotalar joint using two distal interlocking screws. Fixation strength with these distal fractures, however, is not strong enough to resist moderate compression-bending loads. Thus, patients with distal tibia fractures treated with intramedullary nailing must follow weight-bearing restrictions until significant fracture healing occurs to prevent coronal plane malalignment of the fracture.
Assuntos
Pinos Ortopédicos , Fixação Intramedular de Fraturas/instrumentação , Fraturas da Tíbia/cirurgia , Fenômenos Biomecânicos , Cadáver , Desenho de Equipamento , Segurança de Equipamentos , Fixação Intramedular de Fraturas/métodos , Humanos , Distribuição Aleatória , Sensibilidade e Especificidade , Estresse MecânicoRESUMO
Bone of normal quality and quantity can successfully endure physiologically imposed mechanical loads. Chronic kidney disease-mineral and bone disorder (CKD-MBD) adversely affects bone quality through alterations in bone turnover and mineralization, whereas bone quantity is affected through changes in bone volume. Changes in bone quality can be associated with altered bone material, structure, or microdamage, which can result in an elevated rate of fracture in patients with CKD-MBD. Fractures cannot always be explained by reduced bone quantity and, therefore, bone quality should be assessed with a variety of techniques from the macro-organ level to the nanoscale level. In this Review, we demonstrate the importance of evaluating bone from multiple perspectives and hierarchical levels to understand CKD-MBD-related abnormalities in bone quality. Understanding the relationships between variations in material, structure, microdamage, and mechanical properties of bone in patients with CKD-MBD should aid in the development of new modalities to prevent, or treat, these abnormalities.
Assuntos
Doenças Ósseas Metabólicas/diagnóstico , Doenças Ósseas Metabólicas/fisiopatologia , Osso e Ossos/fisiologia , Insuficiência Renal Crônica/fisiopatologia , Doenças Ósseas Metabólicas/etiologia , Humanos , Insuficiência Renal Crônica/complicaçõesRESUMO
BACKGROUND: Osteoporotic fractures commonly occur after low-energy trauma in postmenopausal women with reduced bone quantity documented by low bone mineral density (BMD). Low-energy fractures, however, have also been reported to occur in premenopausal women with normal or near-normal BMD, suggesting the existence of a bone quality abnormality. METHODS: Bone quality and quantity were evaluated in a cross-sectional study of three groups of premenopausal white females: (1) twenty-five subjects with low-energy fracture(s) and BMD in the normal range (t-scores > -2.0), (2) eighteen subjects with low-energy fracture(s) and BMD in the osteoporotic range (t-scores ≤ -2.5), and (3) fourteen healthy volunteers (controls). Bone quality was assessed with use of Fourier transform infrared spectroscopy and histomorphometry in iliac crest bone samples obtained from all subjects; bone quantity was assessed by dual x-ray absorptiometry and histomorphometry. RESULTS: The collagen crosslinking ratio in the non-low-BMD subjects with fractures was 13% greater than the ratio in the low-BMD subjects with fractures and 14% greater than the ratio in the controls (p < 0.001 for both). Cancellous bone volume was 29% greater (p < 0.01) and trabecular separation was 31% less (p < 0.01) in the non-low-BMD subjects with fractures than in the low-BMD subjects with fractures; the values in the non-low-BMD subjects did not differ from those in the controls. Bone turnover did not differ among the groups, and osteomalacia was not present in any subject. Thus, the non-low-BMD subjects with fractures maintained bone quantity, but the collagen crosslinking ratio, a parameter of bone quality, was abnormal. In contrast, the low-BMD subjects with fractures did not have this collagen crosslinking abnormality but did have abnormal bone quantity. CONCLUSIONS: This study highlights a collagen crosslinking abnormality in patients with low-energy fractures and nonosteoporotic t-scores. Reports have indicated that altered collagen crosslinking is associated with subnormal fracture resistance. A finding of nonosteoporotic bone mass in a patient with low-energy fractures would justify assessment of bone material quality, which currently requires a bone biopsy. Further studies are needed to search for possible noninvasive tests to diagnose abnormal crosslinking. Since no specific therapies for abnormal collagen crosslinking are currently available, studies are also needed to explore novel therapeutic modalities to reverse the underlying collagen crosslinking abnormality. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Densidade Óssea/fisiologia , Matriz Óssea/fisiopatologia , Doenças do Colágeno/fisiopatologia , Osteoporose/fisiopatologia , Fraturas por Osteoporose/fisiopatologia , Pré-Menopausa/fisiologia , Adulto , Matriz Óssea/patologia , Estudos de Casos e Controles , Colágeno/química , Doenças do Colágeno/etiologia , Doenças do Colágeno/patologia , Estudos Transversais , Feminino , Humanos , Osteoporose/patologia , Fraturas por Osteoporose/etiologia , Fraturas por Osteoporose/patologiaRESUMO
The wooden plank fence presents a deadly but unrecognized hazard to motorists. We hypothesize that fence plank injury is prevalent and results in significant morbidity and mortality. Databases of the University of Kentucky's Level I Trauma Center and the Fayette County Coroner were retrospectively analyzed over a 12-year period (1995-2006). One hundred and twenty-eight subjects were involved in vehicle contact with wooden plank fences. One hundred and twenty-three subjects were evaluated at the Emergency Department of our trauma center; 35 (27%) had a patient-plank interaction (PPI). Men (30/35) were more frequently involved (86%), and average age was 32.8 years. Thirty-two (91%) were drivers; 14/35 (40%) died from PPI-related injuries. The most common cause of death was blunt head trauma in 13 of these 14 fatally injured subjects (93%). This study provides new data underscoring the frequency, lethality, and economic consequences of this injury mechanism. Further research is needed to quantify the national prevalence of this problem and develop injury-mitigating strategies pertaining to roadway or fence design.
Assuntos
Acidentes de Trânsito/estatística & dados numéricos , Madeira , Ferimentos Penetrantes/epidemiologia , Ferimentos Penetrantes/patologia , Adolescente , Adulto , Distribuição por Idade , Idoso , Idoso de 80 Anos ou mais , Médicos Legistas , Feminino , Medicina Legal , Humanos , Escala de Gravidade do Ferimento , Kentucky/epidemiologia , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Distribuição por Sexo , Centros de Traumatologia , Ferimentos e Lesões/epidemiologia , Adulto JovemRESUMO
BACKGROUND/PURPOSE: This study sought to establish objective anthropometric measures of fit or misfit for young riders on adult and youth-sized all-terrain vehicles and use these metrics to test the unproved historical reasoning that age alone is a sufficient measure of rider-ATV fit. METHODS: Male children (6-11 years, n=8; and 12-15 years, n=11) were selected by convenience sampling. Rider-ATV fit was quantified by five measures adapted from published recommendations: (1) standing-seat clearance, (2) hand size, (3) foot vs. foot-brake position, (4) elbow angle, and (5) handlebar-to-knee distance. RESULTS: Youths aged 12-15 years fit the adult-sized ATV better than the ATV Safety Institute recommended age-appropriate youth model (63% of subjects fit all 5 measures on adult-sized ATV vs. 20% on youth-sized ATV). Youths aged 6-11 years fit poorly on ATVs of both sizes (0% fit all 5 parameters on the adult-sized ATV vs 12% on the youth-sized ATV). CONCLUSIONS: The ATV Safety Institute recommends rider-ATV fit according to age and engine displacement, but no objective data linking age or anthropometrics with ATV engine or frame size has been previously published. Age alone is a poor predictor of rider-ATV fit; the five metrics used offer an improvement compared to current recommendations.
Assuntos
Prevenção de Acidentes , Antropometria , Qualidade de Produtos para o Consumidor , Veículos Off-Road , Adolescente , Fatores Etários , Criança , Guias como Assunto , Humanos , Masculino , Valor Preditivo dos Testes , Estudos Prospectivos , Reprodutibilidade dos TestesRESUMO
Treatment of Legg-Calvé-Perthes disease (LCPD) may improve if new knowledge can be obtained regarding how articular cartilage changes shape during the course of this disorder. A new technique is presented showing how analyses of magnetic resonance images can be used to quantify the three-dimensional changes in the femoral and acetabular articulating cartilage surfaces of children with LCPD. Ten male subjects (8 +/- 1 years) with unilateral LCPD were enrolled in this IRB approved study. Sets of magnetic resonance images of both hips were obtained at three different times. Three-dimensional virtual models of the cartilage were created from these images, and mathematical spheres were fit to the articulating surfaces. Five parameters (size, shape deformity (sphericity error), radial growth rate, joint fit, and joint incongruity) were used to quantify cartilage surface shape. Data were analyzed by using a linear mixed-model. Joint incongruity, i.e., the distance between the centers of the femoral and acetabular spheres, was slightly more than 2.5 times larger (p = 0.001) in LCPD hips than the contralateral normal hips. Cartilage shape deformity was 65% larger in hips with LCPD than in normal hips. Growth rates of the femoral head and the opposing acetabular surface showed that distortion of the femoral surface occurred first and the opposing acetabular surface followed. Mean radial difference (acetabular surface radius minus femoral surface radius) in LCPD hips was less than half (p < 0.01) the value of normal hips. Interobserver variability was approximately 10% of the value attributable to LCPD. This is the first known report presenting a technique that quantifies the three-dimensional size, deformity, growth, fit. and incongruity of the femoral and acetabular articulating cartilaginous surfaces of LCPD and contralateral normal hips. The data obtained support the use of this technique and provide pilot data for a future clinical study of LCPD. Objective assessment of cartilage shape enabled by this technique may aid future diagnoses, enable monitoring of three-dimensional femoral and acetabular remodeling, and permit quantitative assessment of treatment efficacy.
Assuntos
Doença de Legg-Calve-Perthes/patologia , Imageamento por Ressonância Magnética/métodos , Acetábulo/patologia , Cartilagem Articular/patologia , Criança , Cabeça do Fêmur/patologia , Humanos , MasculinoRESUMO
PURPOSE: The purpose of the present preliminary study is to show that a novel 3-dimensional porous silica-calcium phosphate nanocomposite (SCPC) can provide a controlled release of rhBMP-2 and regenerate bone in a load-bearing segmental defect. MATERIALS AND METHODS: A bone replica of the rabbit ulna was created from SCPC powder using rapid prototyping technology. The ceramic bone replica was coated with rhBMP-2 and then implanted into a 10-mm segmental defect created in a rabbit ulna and fixated with a 1-mm titanium adaptation plate. Bone healing was evaluated using computed tomography (CT) scan, histomorphometry, and biomechanical techniques. The release kinetics of rhBMP-2 and the dissolution kinetics were also determined in vitro. Statistical analysis was performed to compare the biomechanical strength of the grafted bone with the contralateral unoperated ulna. RESULTS: After 4 weeks, CT scans showed that the critical size defect had been replaced by newly formed bone. Torsional testing of the ulna after 12 weeks showed restoration of maximum torque and angle at failure. Histological evaluation showed that the regenerated bone had the morphological characteristics of mature bone. SCPC provided a sustained release profile of an effective dose of rhBMP-2 for 14 days. CONCLUSIONS: The SCPC-rhBMP-2 hybrid enhanced bone regeneration in a load-bearing segmental defect in a rabbit ulna. The regenerated bone acquired morphology and mechanical strength typical for natural bone. The enhanced bone formation correlates well with the surface bioactivity and effective release profile of rhBMP-2. The present preliminary study shows the proof of principles that porous, resorbable, bioactive SCPC-rhBMP-2 tissue engineering hybrid can serve as a substitute for autologous bone in load-bearing applications.
Assuntos
Proteínas Morfogenéticas Ósseas/metabolismo , Substitutos Ósseos/farmacocinética , Fosfatos de Cálcio/farmacocinética , Nanocompostos/uso terapêutico , Desenho de Prótese/métodos , Silicatos/farmacocinética , Fator de Crescimento Transformador beta/metabolismo , Ulna/efeitos dos fármacos , Implantes Absorvíveis , Animais , Fenômenos Biomecânicos , Proteína Morfogenética Óssea 2 , Proteínas Morfogenéticas Ósseas/administração & dosagem , Proteínas Morfogenéticas Ósseas/análise , Regeneração Óssea/efeitos dos fármacos , Regeneração Óssea/fisiologia , Substitutos Ósseos/química , Substitutos Ósseos/uso terapêutico , Fosfatos de Cálcio/química , Fosfatos de Cálcio/uso terapêutico , Preparações de Ação Retardada , Sistemas de Liberação de Medicamentos , Regeneração Tecidual Guiada/métodos , Humanos , Masculino , Teste de Materiais , Nanocompostos/química , Osseointegração/efeitos dos fármacos , Osseointegração/fisiologia , Coelhos , Proteínas Recombinantes , Silicatos/química , Silicatos/uso terapêutico , Engenharia Tecidual/métodos , Fator de Crescimento Transformador beta/administração & dosagem , Fator de Crescimento Transformador beta/análise , Ulna/cirurgiaRESUMO
BACKGROUND: Conventional (rigid) fusion instrumentation is believed to accelerate the degeneration of adjacent discs by increasing stresses caused by motion discontinuity. Fusion instrumentation that employs reduced rod stiffness and increased axial motion, or dynamic instrumentation, may partially alleviate this problem, but the effects of this instrumentation on the stresses in the adjacent disc are unknown. We used a finiteelement model to calculate and compare the stresses in the adjacent-level disc that are induced by rigid and dynamic posterior lumbar fusion instrumentation. METHODS: A 3-dimensional finite-element model of the lumbar spine was obtained that simulated flexion and extension. The L5-S1 segment of this model was fused, and the L4-L5 segment was fixed with rigid or dynamic instrumentation. The mechanical properties of the dynamic instrumentation were determined by laboratory testing and then used in the finite-element model. Peak stresses in the lumbar discs were calculated and compared. RESULTS: The reduced-stiffness component of the dynamic instrumentation was associated with a 1% to 2% reduction in peak compressive stresses in the adjacent-level disc (at 45° flexion), and the increased axial motion component of this instrumentation reduced peak disc stress by 8% to 9%. Areas of disc tissue exposed to 80% of peak stresses of 6.17 MPa were 47% less for discs adjacent to dynamic instrumentation than for those adjacent to rigid instrumentation. CONCLUSIONS: Reduced stiffness and increased axial motion of dynamic posterior lumbar fusion instrumentation designs result in an approximately 10% cumulative stress reduction for each flexion cycle. The effect of this stress reduction over many cycles may be substantial. CLINICAL RELEVANCE: The cumulative effect of this reduced amplitude and distribution of peak stresses in the adjacent disc may partially alleviate the problem of adjacent-level disc degeneration.
RESUMO
Despite the inability of radiographic measurements to quantify the 3-dimensional (3D) shape and size of the hindfoot bones affected by the clubfoot pathology, radiographs continue to be used to evaluate treatment efficacy. Advancements in imaging and image analysis allow new quantitative insights to be obtained into bone shape and size. Therefore, this study sought to quantify and compare the 3D size, shape, and articulating surface morphology of the tibia, talus, calcaneus, navicular, and cuboid bones in the adolescent surgically treated unilateral clubfoot and the contralateral normal foot. Anatomic measurements were obtained by geometrically modeling 3D reconstructed magnetic resonance images of the hindfoot tarsals in the feet of 7 adolescents (mean age, 13.0+/-2.8 years). The results showed that the tarsal bones in the surgically treated clubfoot were smaller in volume (20%-36%) and smaller in surface area (16%-28%) than those in the contralateral normal foot. Correspondingly, the size and shape of the articulating surfaces of these bones in the surgically treated clubfoot were also smaller and flatter than those in the contralateral normal foot. Specifically, the mean talar articular surface area was 25% to 40% smaller, the mean talar-tibiotalar articular surface length was 26% smaller, the mean tibiotalar articular surface length difference was 78% smaller, and the mean navicular "flattening index" was 86% larger in the surgically treated clubfoot. These data offer an objective standard that will advance the knowledge of the clubfoot pathology and aid treatment efficacy evaluation.
Assuntos
Pé Torto Equinovaro/diagnóstico por imagem , Pé Torto Equinovaro/cirurgia , Avaliação de Resultados em Cuidados de Saúde/métodos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Índice de Gravidade de Doença , Adolescente , Pé Torto Equinovaro/classificação , Feminino , Humanos , Imageamento Tridimensional , Masculino , Prognóstico , Valores de Referência , Resultado do TratamentoRESUMO
Advances in imaging and computerized analyses have enabled three-dimensional bone motion in the treated clubfoot to be measured precisely. Three-dimensional translations and rotations of the talus, calcaneus, navicular, and cuboid of surgically treated clubfeet were less in magnitude and sometimes different in direction (or without motion in a specific plane) compared with the contralateral normal feet. Surgical techniques used for clubfoot treatment do not restore normal hindfoot bone motion when examined with high-resolution magnetic resonance imaging, computer reconstruction, and image analysis techniques. These data advance the knowledge of hindfoot bone motion and establish a new and quantitative objective.
Assuntos
Articulação do Tornozelo/fisiologia , Pé Torto Equinovaro/fisiopatologia , Pé Torto Equinovaro/cirurgia , Calcanhar/fisiologia , Interpretação de Imagem Assistida por Computador , Imageamento Tridimensional , Adolescente , Criança , Pé Torto Equinovaro/diagnóstico , Humanos , Imageamento por Ressonância Magnética , Masculino , Pronação , Amplitude de Movimento Articular , SupinaçãoRESUMO
Proximal tibial osteotomies require secure and durable fixation to allow early range of motion; however, biomechanical data comparing commonly used fixation methods are lacking. The current study was done to quantify the dynamic biomechanical performance of blade staple fixation and plate fixation of simulated proximal tibial osteotomies. A 15 degrees proximal tibial osteotomy was done on each of 18 synthetic adult composite tibias. Blade staples were used as the means of fixation in nine tibias; plate fixation was used in the remaining nine tibias. The specimens were stressed cyclically in sinusoidal loading whose peak compression and tension loads imitate those measured during normal gait. Device performance was quantified by measuring displacement at the osteotomy site and the number of cycles to failure. Plate fixation had a greater fatigue life than staples (eight plates surviving past 200,000 cycles versus one blade staple) and showed a trend toward less displacement (0.69 mm versus 0.97 mm). Plate fixation of proximal tibial osteotomies offers better fixation and dynamic mechanical performance than blade staples.