Zwitterionic materials with disorder and plasticity and their application as non-volatile solid or liquid electrolytes.

Zwitterionic materials can exhibit unique characteristics and are highly tunable by variation to the covalently bound cationic and anionic moieties. Despite the breadth of properties and potential uses reported to date, for electrolyte applications they have thus far primarily been used as additives or for making polymer gels. However, zwitterions offer intriguing promise as electrolyte matrix materials that are non-volatile and charged but non-migrating. Here we report a family of zwitterions that exhibit molecular disorder and plasticity, which allows their use as a solid-state conductive matrix. We have characterized the thermal, morphological and structural properties of these materials using techniques including differential scanning calorimetry, scanning electron microscopy, solid-state NMR and X-ray crystallography. We report the physical and transport properties of zwitterions combined with lithium salts and a lithium-functionalized polymer to form solid or high-salt-content liquid electrolytes. We demonstrate that the zwitterion-based electrolytes can allow high target ion transport and support stable lithium metal cell cycling. The ability to use disordered zwitterionic materials as electrolyte matrices for high target ion conduction, coupled with an extensive scope for varying the chemical and physical properties, has important implications for the future design of non-volatile materials that bridge the choice between traditional molecular and ionic solvent systems.

Innovative Electrolytes Based on Ionic Liquids and Polymers for Next-Generation Solid-State Batteries.

Electrolytes based on organic solvents used in current Li-ion batteries are not compatible with the next-generation energy storage technologies including those based on Li metal. Thus, there has been an increase in research activities investigating solid-state electrolytes, ionic liquids (ILs), polymers, and combinations of these. This Account will discuss some of the work from our teams in these areas. Similarly, other metal-based technologies including Na, Mg, Zn, and Al, for example, are being considered as alternatives to Li-based energy storage. However, the materials research required to effectively enable these alkali metal based energy storage applications is still in its relative infancy. Once again, electrolytes play a significant role in enabling these devices, and research has for the most part progressed along similar lines to that in advanced lithium technologies. Some of our recent contributions in these areas will also be discussed, along with our perspective on future directions in this field. For example, one approach has been to develop single-ion conductors, where the anion is tethered to the polymer backbone, and the dominant charge conductor is the lithium or sodium countercation. Typically, these present with low conductivity, whereas by using a copolymer approach or incorporating bulky quaternary ammonium co-cations, the effective charge separation is increased thus leading to higher conductivities and greater mobility of the alkali metal cation. This has been demonstrated both experimentally and via computer simulations. Further enhancements in ion transport may be possible in the future by designing and tethering more weakly associating anions to the polymer backbone. The second approach considers ion gels or composite polymer electrolytes where a polymerized ionic liquid is the matrix that provides both mechanical robustness and ion conducting pathways. The block copolymer approach is also demonstrated, in this case, to simultaneously provide mechanical properties and high ionic conductivity when used in combination with ionic-liquid electrolytes. The ultimate electrolyte material that will enable all high-performance solid-state batteries will have ion transport decoupled from the mechanical properties. While inorganic conductors can achieve this, their rigid, brittle nature creates difficulties. On the other hand, ionic polymers and their composites provide a rich area of chemistry to design and tune high ionic conductivity together with ideal mechanical properties.

Proton Conducting Membranes Based on Poly(Ionic Liquids) Having Phosphonium Counter-Cations.

Proton conducting polymeric membranes are highly searched in many different technologies ranging from energy to biosensing. Protic ionic liquids and their polymeric version represent a new family of proton conducting molecules with relatively facile synthesis and excellent properties. In this work, protic poly(ionic liquids) having the most popular phosphonium counter-cations are presented for the first time. The synthesis is carried out through proton transfer reactions or through ion exchange reactions by using commercially available tertiary phosphines. Tributyl-, trioctyl-, and tricyclohexyl-phosphine are selected to form the desired cations. Polystyrene sulfonic acid, poly(2-acrylamido-2-methyl-1-propanesulfonic acid), and lithium poly[(4-styrenesulfonyl) (trifluoromethanesulfonyl)imide] polymers are used to form the polymeric anions. The chemical structure of the protic poly(ionic liquids) is confirmed by spectroscopic characterizations such as Fourier transform infrared and nuclear magnetic resonance spectroscopies. Thermal properties of the polymer are characterized by means of differential scanning calorimetry and thermogravimetric analysis. Polymers exhibit good membrane forming ability as well as high ionic conductivities in the range of 10-8 to 10-3 S cm-1 from 30 to 90 °C.

Task-Specific Phosphonium Iongels by Fast UV-Photopolymerization for Solid-State Sodium Metal Batteries.

Sodium metal batteries are an emerging technology that shows promise in terms of materials availability with respect to lithium batteries. Solid electrolytes are needed to tackle the safety issues related to sodium metal. In this work, a simple method to prepare a mechanically robust and efficient soft solid electrolyte for sodium batteries is demonstrated. A task-specific iongel electrolyte was prepared by combining in a simple process the excellent performance of sodium metal electrodes of an ionic liquid electrolyte and the mechanical properties of polymers. The iongel was synthesized by fast (<1 min) UV photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of a saturated 42%mol solution of sodium bis(fluorosulfonyl)imide (NaFSI) in trimethyl iso-butyl phosphonium bis(fluorosulfonyl)imide (P111i4FSI). The resulting soft solid electrolytes showed high ionic conductivity at room temperature (≥10−3 S cm−1) and tunable storage modulus (104−107 Pa). Iongel with the best ionic conductivity and good mechanical properties (Iongel10) showed excellent battery performance: Na/iongel/NaFePO4 full cells delivered a high specific capacity of 140 mAh g−1 at 0.1 C and 120 mAh g−1 at 1 C with good capacity retention after 30 cycles.

Tuning Proton Exchange and Transport in Protic Ionic Liquid Solution through Anion Chemistry.

Herein, we demonstrate that the potential difference of proton reduction and hydrogen gas oxidation of protic ionic liquids is closely related to the proton exchange rate in the electrolyte. Through a careful design of anion chemistry, the proton exchange rate can be boosted by several orders of magnitude, reaching 200 kHz at 100 °C. It is found that the enhanced proton exchange rate can effectively decrease the potential loss at the electrode, most likely through alleviating the H+ concentration gradient incurred by electrochemical reactions at the electrode surfaces. This research therefore highlights the strategy of using anions of medium-strength acids, such as H2PO4-, for protic ionic liquids with enhanced proton exchange capability.

Easy-to-Make Polymer Hydrogels by UV-Curing for the Cleaning of Acrylic Emulsion Paint Films.

The cleaning of acrylic emulsion paint surfaces poses a great challenge in the conservation field, due to their high water sensitivity. In this article, we present easy-to-make polymer hydrogels, made by UV-photopolymerization, that show excellent cleaning properties. The formulation of hydrogels obtained by UV-curing and their performance as dry cleaners for acrylic paints was investigated. First, different hydrogel formulations based on functional acrylic monomers were used to formulate a series of UV cross-linked hydrogels by fast UV photopolymerization. Their effectiveness on surface dirt removal was investigated by SEM microscopy and colorimetry. The hydrogels showed excellent cleaning properties and controlled water release, and they still performed satisfactorily after several cleaning uses. The obtained UV-hydrogels were compared to the well-known agar gels, showing benefits in terms of reducing excess water. This article shows that easy-to-make UV-cured hydrogels are an efficient tool for the cleaning of surface dirt from water-sensitive paintings, overcoming the limits of traditional cleaning methods.

Emerging iongel materials towards applications in energy and bioelectronics.

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Single-Ion Conducting Polymer Nanoparticles as Functional Fillers for Solid Electrolytes in Lithium Metal Batteries.

Composite solid electrolytes including inorganic nanoparticles or nanofibers which improve the performance of polymer electrolytes due to their superior mechanical, ionic conductivity, or lithium transference number are actively being researched for applications in lithium metal batteries. However, inorganic nanoparticles present limitations such as tedious surface functionalization and agglomeration issues and poor homogeneity at high concentrations in polymer matrixes. In this work, we report on polymer nanoparticles with a lithium sulfonamide surface functionality (LiPNP) for application as electrolytes in lithium metal batteries. The particles are prepared by semibatch emulsion polymerization, an easily up-scalable technique. LiPNPs are used to prepare two different families of particle-reinforced solid electrolytes. When mixed with poly(ethylene oxide) and lithium bis(trifluoromethane)sulfonimide (LiTFSI/PEO), the particles invoke a significant stiffening effect (E' > 106 Pa vs 105 Pa at 80 °C) while the membranes retain high ionic conductivity (σ = 6.6 × 10-4 S cm-1). Preliminary testing in LiFePO4 lithium metal cells showed promising performance of the PEO nanocomposite electrolytes. By mixing the particles with propylene carbonate without any additional salt, we obtain true single-ion conducting gel electrolytes, as the lithium sulfonamide surface functionalities are the only sources of lithium ions in the system. The gel electrolytes are mechanically robust (up to G' = 106 Pa) and show ionic conductivity up to 10-4 S cm-1. Finally, the PC nanocomposite electrolytes were tested in symmetrical lithium cells. Our findings suggest that all-polymer nanoparticles could represent a new building block material for solid-state lithium metal battery applications.

A water-based and metal-free dye solar cell exceeding 7% efficiency using a cationic poly(3,4-ethylenedioxythiophene) derivative.

A green, efficient and stable solar cell based only on water and safe and cheap elements of the periodic table is proposed in this work, finally consolidating (also from a sustainability viewpoint) the concept of "artificial photosynthesis" studied for decades by the scientific community. The concept of dye-sensitized solar cells is re-proposed here with a metal-free organic dye, an iodine-based electrolyte in a 100% aqueous environment and a new cathode (cationic PEDOT) synthesized for the first time with the aim of inhibiting the repulsion between the anions of redox couples and the PEDOT:PSS matrix commonly used as the counter-electrode. This elegant setup leads to a record efficiency of 7.02%, the highest value ever obtained for a water-based solar cell and, in general, for a photovoltaic device free of both organic solvents and expensive/heavy metals.

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries.

Lithium metal anodes have been pursued for decades as a way to significantly increase the energy density of lithium-ion batteries. However, safety risks caused by flammable liquid electrolytes and short circuits due to lithium dendrite formation during cell cycling have so far prevented the use of lithium metal in commercial batteries. Solid polymer electrolytes (SPEs) offer a potential solution if their mechanical properties and ionic conductivity can be simultaneously engineered. Here, we introduce a family of SPEs that are scalable and easy to prepare with a photopolymerization process, synthesized from amphiphilic acrylic polymer conetworks based on poly(ethylene glycol), 2-hydroxy-ethylacrylate, norbornyl acrylate, and either lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) or a single-ion polymethacrylate as lithium-ion source. Several conetworks were synthesized and cycled, and their ionic conductivity, mechanical properties, and lithium transference number were characterized. A single-ion-conducting polymer electrolyte shows the best compromise between the different properties and extends the calendar life of the cell.

Tailored Methodology Based on Vapor Phase Polymerization to Manufacture PEDOT/CNT Scaffolds for Tissue Engineering.

Three-dimensional (3D) scaffolds with tailored stiffness, porosity, and conductive properties are particularly important in tissue engineering for electroactive cell attachment, proliferation, and vascularization. Carbon nanotubes (CNTs) and poly(3,4-ethylenedioxythiophene) (PEDOT) have been extensively used separately as neural interfaces showing excellent results. Herein, we combine both the materials and manufacture 3D structures composed exclusively of PEDOT and CNTs using a methodology based on vapor phase polymerization of PEDOT onto a CNT/sucrose template. Such a strategy presents versatility to produce porous scaffolds, after leaching out the sucrose grains, with different ratios of polymer/CNTs, and controllable and tunable electrical and mechanical properties. The resulting 3D structures show Young's modulus typical of soft materials (20-50 kPa), as well as high electrical conductivity, which may play an important role in electroactive cell growth. The conductive PEDOT/CNT porous scaffolds present high biocompatibility after 3 and 6 days of C8-D1A astrocyte incubation.

Ionic Hydrogel for Accelerated Dopamine Delivery via Retrodialysis.

Local drug delivery directly to the source of a given pathology using retrodialysis is a promising approach to treating otherwise untreatable diseases. As the primary material component in retrodialysis, the semipermeable membrane represents a critical point for innovation. This work presents a new ionic hydrogel based on polyethylene glycol and acrylate with dopamine counterions. The ionic hydrogel membrane is shown to be a promising material for controlled diffusive delivery of dopamine. The ionic nature of the membrane accelerates uptake of cationic species compared to a nonionic membrane of otherwise similar composition. It is demonstrated that the increased uptake of cations can be exploited to confer an accelerated transport of cationic species between reservoirs as is desired in retrodialysis applications. This effect is shown to enable nearly 10-fold increases in drug delivery rates from low concentration solutions. The processability of the membrane is found to allow for integration with microfabricated devices which will in turn accelerate adaptation into both existing and emerging device modalities. It is anticipated that a similar materials design approach may be broadly applied to a variety of cationic and anionic compounds for drug delivery applications ranging from neurological disorders to cancer.

Biodegradable Polycarbonate Iongels for Electrophysiology Measurements.

In recent years, gels based on ionic liquids incorporated into polymer matrices, namely iongels, have emerged as long-term contact media for cutaneous electrophysiology. Iongels possess high ionic conductivity and negligible vapor pressure and can be designed on demand. In spite of the extensive efforts devoted to the preparation of biodegradable ionic liquids, the investigations related to the preparation of iongels based on biodegradable polymers remain scarce. In this work, biodegradable polycarbonate-based iongels are prepared by ring-opening polymerization of N-substituted eight ring membered cyclic carbonate monomers in the presence of imidazolium lactate ionic liquid. Our iongels are able to take up 10⁻30 wt % of ionic liquid and become softer materials by increasing the amount of free ionic liquid. Rheological measurements showed that the cross-over point between the storage modulus G' and loss modulus G″ occurs at lower angular frequencies when the loading of free ionic liquid increases. These gels are able to take up to 30 wt % of the ionic liquid and the ionic conductivity of these gels increased up to 5 × 10-4 S·cm-1 at 25 °C as the amount of free ionic liquid increased. Additionally, we assess the biodegradation studies of the iongels by immersing them in water. The iongels decrease the impedance with the human skin to levels that are similar to commercial Ag/AgCl electrodes, allowing an accurate physiologic signals recording. The low toxicity and biodegradability of polycarbonate-based iongels make these materials highly attractive for cutaneous electrophysiology applications.

Super Soft All-Ethylene Oxide Polymer Electrolyte for Safe All-Solid Lithium Batteries.

Here we demonstrate that by regulating the mobility of classic -EO- based backbones, an innovative polymer electrolyte system can be architectured. This polymer electrolyte allows the construction of all solid lithium-based polymer cells having outstanding cycling behaviour in terms of rate capability and stability over a wide range of operating temperatures. Polymer electrolytes are obtained by UV-induced (co)polymerization, which promotes an effective interlinking between the polyethylene oxide (PEO) chains plasticized by tetraglyme at various lithium salt concentrations. The polymer networks exhibit sterling mechanical robustness, high flexibility, homogeneous and highly amorphous characteristics. Ambient temperature ionic conductivity values exceeding 0.1 mS cm(-1) are obtained, along with a wide electrochemical stability window (>5 V vs. Li/Li(+)), excellent lithium ion transference number (>0.6) as well as interfacial stability. Moreover, the efficacious resistance to lithium dendrite nucleation and growth postulates the implementation of these polymer electrolytes in next generation of all-solid Li-metal batteries working at ambient conditions.

Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries.

Polymer electrolytes have been proposed as replacement for conventional liquid electrolytes in lithium-ion batteries (LIBs) due to their intrinsic enhanced safety. Nevertheless, the power delivery of these materials is limited by the concentration gradient of the lithium salt. Single-ion conducting polyelectrolytes represent the ideal solution since their nature prevents polarization phenomena. Herein, the preparation of a new family of single-ion conducting block copolymer polyelectrolytes via reversible addition-fragmentation chain transfer polymerization technique is reported. These copolymers comprise poly(lithium 1-[3-(methacryloyloxy)propylsulfonyl]-1-(trifluoromethylsulfonyl)imide) and poly(ethylene glycol) methyl ether methacrylate blocks. The obtained polyelectrolytes show low Tg values in the range of -61 to 0.6 °C, comparatively high ionic conductivity (up to 2.3 × 10(-6) and 1.2 × 10(-5) S cm(-1) at 25 and 55 °C, respectively), wide electrochemical stability (up to 4.5 V versus Li(+)/Li), and a lithium-ion transference number close to unity (0.83). Owing to the combination of all mentioned properties, the prepared polymer materials were used as solid polyelectrolytes and as binders in the elaboration of lithium-metal battery prototypes with high charge/discharge efficiency and excellent specific capacity (up to 130 mAh g(-1)) at C/15 rate.

Newly Elaborated Multipurpose Polymer Electrolyte Encompassing RTILs for Smart Energy-Efficient Devices.

Profoundly ion-conducting, self-standing, and tack-free ethylene oxide-based polymer electrolytes encompassing a room-temperature ionic liquid (RTIL) with specific amounts of lithium salt are successfully prepared via a rapid and easily upscalable process including a UV irradiation step. All prepared materials are thoroughly characterized in terms of their physical, chemical, and morphological properties and eventually galvanostatically cycled in lab-scale lithium batteries (LIBs) exploiting a novel direct polymerization procedure to get intimate electrode/electrolyte interfacial characteristics. The promising multipurpose characteristics of the newly elaborated materials are demonstrated by testing them in dye-sensitized solar cells (DSSCs), where the introduction of the iodine/iodide-based redox mediator in the polymer matrix assured the functioning of a lab-scale test cell with conversion efficiency exceeding 6% at 1 sun. The reported results enlighten the promising prospects of the material to be successfully implemented as stable, durable, and efficient electrolyte in next-generation energy conversion and storage devices.