Practical Access to Fused Carbazoles via Oxidative Benzannulation and their Photophysical Properties.

An aryne annulation strategy for the synthesis of fused carbazoles is developed using indolyl ß-ketonitrile in a cascade manner. The reaction sequence involves aryne-mediated [2 + 2] cycloaddition cleavage and intramolecular Michael addition, followed by oxidation under transition-metal-free reaction conditions. Subsequently, conversion of benzo[b]carbazole-6-carbonitrile to carbazole quinone is observed upon prolongation of the reaction time. Furthermore, these materials exhibit high quantum efficiency, which promotes the light-emitting diode applications.

Hot carrier dynamics in metalated porphyrin-naphthalimide thin films.

This study employs femtosecond transient absorption spectroscopy to investigate the rapid dynamics of excited state carriers in three metalated porphyrin-naphthalimide (PN) molecules and one free-base molecule. The dynamics of electron injection, from PN to mesoporous titania (TiO2), in PN adsorbed TiO2 films (Ti-PN), were carefully investigated and compared to PN adsorbed ZrO2 films (Zr-PN). In addition, we examined the self-assembled PN films and found that, in their self-assembled state, these molecules exhibited a longer relaxation time than Zr-PN monomeric films, where the charge injection channel was insignificant. The ground-state bleach band in the Ti-PN films gradually shifted to longer wavelengths, indicating the occurrence of the Stark effect. Faster electron injection was observed for the metalated PN systems and the electron injection times from the various excited states to the conduction band of TiO2 (CB-TiO2) were obtained from the target model analysis of the transient absorption spectra data matrix. In these metal-organic complexes, hot electron injection from PN to CB-TiO2 occurred on a time scale of <360 fs. Importantly, Cu(II)-based PN complexes exhibited faster injection and longer recombination times. The injection times have been estimated to result from a locally excited state at ≈280 fs, a hot singlet excited state at 4.95 ps, and a vibrationally relaxed singlet excited state at 97.88 ps. The critical photophysical and charge injection processes seen here provide the potential for exploring the underlying factors involved and how they correlate with photocatalytic performance.

Conducting 1D nanostructures from light-stimulated copper-metalated porphyrin-dibenzothiophene.

Control over the dimensionality of stimulated organic semiconductors has aroused significant interest in organic electronics; however, the design of such materials still remains to be decided. Herein, we have developed three dibenzothiophene-appended freebase, zinc-metalated and copper-metalated porphyrin derivatives (PFb-DBT, PZn-DBT and PCu-DBT) in which PCu-DBT leads to an anion-binding complex in chloroform upon the application of light, resulting in self-assembled 1D nanostructures with high electrical conductivity. Nevertheless, light-stimulated freebase and zinc-metalated P-DBT undergo protonation and demetalation. Electron microscopic images displayed the anion-binding-assisted 1D nanostructure using weak non-covalent interactions, which promotes enhancement in electrical conductivity among other things, as confirmed by electrochemical impedance spectra. Thus, the generation of well-defined nanostructures with improved electronic characteristics from stimuli-responsive organic dyes suggests the importance of developing various smart materials for efficient field effect transistors and sensors.

Phenothiazine functional materials for organic optoelectronic applications.

Phenothiazine (PTZ) is one of the most extensively investigated S, N heterocyclic aromatic hydrocarbons due to its unique optical, electronic properties, flexibility of functionalization, low cost, and commercial availability. Hence, PTZ and its derivative materials have been attractive in various optoelectronic applications in the last few years. In this prospective, we have focused on the most significant characteristics of PTZ and highlighted how the structural modifications such as different electron donors or acceptors, length of the π-conjugated system or spacers, polar or non-polar chains, and other functional groups influence the optoelectronic properties. This prospective provides a recent account of the advances in phenothiazine derivative materials as an active layer(s) for optoelectronic (viz. dye sensitized solar cells (DSSCs), perovskite solar cells (PSCs), organic solar cells (OSCs), organic light-emitting diodes (OLEDs), organic field-effect transistor (OFETs), chemosensing, nonlinear optical materials (NLOs), and supramolecular self-assembly applications. Finally, future prospects are discussed based on the structure-property relationship in PTZ-derivative materials. This overview will pave the way for researchers to design and develop new PTZ-functionalized structures and use them for various organic optoelectronic applications.

Stipulating Low Production Cost Solar Cells All Set to Retail !

Today's solar cells are exceptionally in demand whilst excess exploitation of natural fossil fuels. In this context, the first and second generation solar cells commercially available in market for more than decades however limitations in production cost and large-scale applications insist to generate inexpensive materials for fabrication. Thereby, organic materials based solar cells explored and emerging as third generation solar cells which possess flexibility, low cost and large-scale applications. For example, organic photovoltaics, dye sensitized solar cells and perovskite (organic-inorganic) solar cells (PSCs) are considered third generation solar cells wherein PSCs reached the record power conversion efficiency (PCE ∼23 %) and durability assists great advantages for commercialization in near future. Moreover, we reported various global renowned companies involved producing the modules and materials for three generation solar cells, hence, majority of companies considered commercialization of perovskite based solar cells assist low cost photovoltaics to meet the current energy necessities and environmental safety.

Metal-free propargylation/aza-annulation approach to substituted ß-carbolines and evaluation of their photophysical properties.

An efficient acid-catalyzed propargylation/aza-annulation sequence was developed under metal-free reaction conditions, thus leading to a one-pot synthesis of a variety of substituted ß-carbolines starting from propargylic alcohols and indole 2-carbonyls. This versatile strategy was further extended to the synthesis of 5-azaindoles and 5-azabenzothiazoles. Optical properties suggested that manipulation of electron donor and acceptor moieties on ß-carbolines has an impact on their ground and excited state electronic behavior. This leads to blue or green emission and should facilitate the development of organic light emitting diodes (OLEDs). Electrochemical and stability studies revealed that 4a-6 shows ease of redox activity and photostability during illumination.

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells.

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic-inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine) 9,9-spirobifluorene (spiro-OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuOx reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.

Light induced oxidation of an indoline derived system triggered spherical aggregates.

Indoline based donor-acceptor system (InBT) exhibits a colour transition from pink to orange to yellow in chloroform facilitated by the photo-oxidation of the N,N-dimethyl indoline of InBT and neutralized by chloride counter ions upon light irradiation at short and long range excitation wavelengths of 320 and 500 nm, which leads to spherical aggregates when subjected to methanol vapour diffusion (MVD).

Selective synthesis of single- and multi-walled supramolecular nanotubes by using solvophobic/solvophilic controls: stepwise radial growth via "coil-on-tube" intermediates.

Novel hexa-peri-hexabenzocoronene (HBC) derivatives, (F) HBC and (F) HBC*, which carry perfluoroalkyl segments on one side of the HBC core and long alkyl tails on the other, were synthesized. Their perfluoroalkyl segments are highly solvated in C6 F6 (solvophilic effect) and do not assemble, whereas in CH2 Cl2 , they are excluded (solvophobic effect) and assemble together consequently. For example, the use of C6 F6 and CH2 Cl2 as assembling media for (F) HBC leads to the selective formation of single- and multi-walled nanotubes, respectively. When a higher monomer concentration is applied in CH2 Cl2 , multi-walled nanotubes with a larger number of walls result. (F) HBC in CH2 Cl2 self-assembles rather slowly, thereby allowing for the observation of coil-on-tube structures, which are possible intermediates for the stepwise radial growth of the nanotubular wall. Casting of the multi-walled nanotubes onto a quartz plate yields a superhydrophobic thin film with a water contact angle of 161±2°.

Organic donor-acceptor assemblies form coaxial p-n heterojunctions with high photoconductivity.

The formation of coaxial p-n heterojunctions by mesoscale alignment of self-sorted donor and acceptor molecules, important to achieve high photocurrent generation in organic semiconductor-based assemblies, remains a challenging topic. Herein, we show that mixing a p-type π gelator (TTV) with an n-type semiconductor (PBI) results in the formation of self-sorted fibers which are coaxially aligned to form interfacial p-n heterojunctions. UV/Vis absorption spectroscopy, powder X-ray diffraction studies, atomic force microscopy, and Kelvin-probe force microscopy revealed an initial self-sorting at the molecular level and a subsequent mesoscale self-assembly of the resulted supramolecular fibers leading to coaxially aligned p-n heterojunctions. A flash photolysis time-resolved microwave conductivity (FP-TRMC) study revealed a 12-fold enhancement in the anisotropic photoconductivity of TTV/PBI coaxial fibers when compared to the individual assemblies of the donor/acceptor molecules.

Metal-free functionalization of tyrosine residues in short peptides and study of the morphological alterations.

An efficient functionalization of tyrosine residues in phenolic regions is achieved under metal-free conditions. The strategy involves the conversion of a tyrosine residue to 4-amino phenylalanine or 4-amino-3-methoxy phenylalanine in short peptides through a controlled oxidative dearomatization. This transformation is achieved in one pot with good yields and excellent regioselectivity. Consequently, the self-assembly of the peptide compounds has been studied at the nanoscopic level before and after functionalization. The results suggest that the peptide derivatives comprising amide groups promote intermolecular H-bonding interactions and the difference in -OH and -NH2 functional groups is found to be responsible for the morphological changes. Morphological transitions from 1D nanowires to 2D nanosheets were observed during functional group modification.

Narcissistic self-sorting in Zn(II) porphyrin derived semiconducting nanostructures.

The narcissistic self-sorted phenomenon is explicitly attributed to the structural similarities in organic molecules. Although such relevant materials are rarely explored, self-sorted structures from macrocyclic π-conjugated-based p- and n-type organic semiconductors facilitate the increase of exciton dissociation and charge separation in bulk heterojunction solar cells. Herein, we report two extended π-conjugated derivatives consisting of zinc-porphyrin-linked benzothiadiazole acting as an acceptor (PB) and anthracene as a donor (PA). Despite having the same porphyrin π-conjugated core in PA and PB, variations in donor and acceptor moieties make the molecular packing form one-dimensional (1D) self-assembled nanofibers via H- and J-type aggregates. Interestingly, a dissimilar aggregate of PA and PB exists as a mixture (PA + PB), promoting narcissistic self-sorted structures. Electrochemical impedance investigation reveals that the electronic characteristics of self-sorting assemblies are influenced by the difference in electrostatic potentials for PA and PB, resulting in a transitional electrical conductivity of 0.14 S cm-1. Therefore, the design of such materials for the fabrication of effective photovoltaics is promoted by these extraordinary self-sorted behaviors in comparable organic π-conjugated molecules.

All-Inorganic Lead-Free Doped-Metal Halides for Bright Solid-State Emission from Primary Colors to White Light.

Metal halides have been explored with the aid of strong photoluminescence for optical and optoelectronic applications. However, the preparation of lead (Pb)-free solid-state emitters with high photoluminescence quantum yields (PLQYs) and tunable emission remains exceptionally challenging. Herein, we report metal ion (Cu(I), Mn(II), and Sn(II))-doped Cs3ZnI5 single crystals that are primary color (violet, green, and orange/red) emitters with extremely high PLQYs. Whereas the Mn-doping leads to bright green emissions with 100% PLQY, the Cu- and Sn-doping give rise to blue and red emissions with PLQYs of 57 and 64%, respectively. Interestingly, higher Mn doping results in white light emissive crystals as a side product, which are found to be Mn-doped CsI single crystals. The bright white light emissive crystals can be synthesized in a pure form in large quantities and exhibit a high color rendering index (CRI) of 78 and CIE coordinates of (0.30, 0.38), which are close to daylight conditions. To the best of our knowledge, this is the first demonstration of white light emission from a complete inorganic system. Importantly, the single crystals of all colors exhibit high long-term stability as their PLQY remains unchanged even after 2 months of preparation, and are thermally stable up to 600 °C.

Self-assembled gelators for organic electronics.

Nature excels at engineering materials by using the principles of chemical synthesis and molecular self-assembly with the help of noncovalent forces. Learning from these phenomena, scientists have been able to create a variety of self-assembled artificial materials of different size, shapes, and properties for wide ranging applications. An area of great interest in this regard is solvent-assisted gel formation with functional organic molecules, thus leading to one-dimensional fibers. Such fibers have improved electronic properties and are potential soft materials for organic electronic devices, particularly in bulk heterojunction solar cells. Described herein is how molecular self-assembly, which was originally proposed as a simple laboratory curiosity, has helped the evolution of a variety of soft functional materials useful for advanced electronic devices such as organic field-effect transistors and organic solar cells. Highlights on some of the recent developments are discussed.

Structurally directed thienylenevinylene self-assembly for improved charge carrier mobility: 2D sheets vs. 1D fibers.

High charge carrier mobility is a prerequisite for organic electronics for which molecular arrangement and morphology play a vital role. Herein, we report how the self-assembly of thienylenevinylenes T1 and T2 can achieve morphologically distinct nanostructures with improved charge carrier mobility. Morphological analysis revealed that T1 forms 2D nanosheets that further extend to an array of hierarchical pseudo-1D assemblies, whereas T2 results in 1D nanofibers. Flash photolysis - time resolved microwave conductivity and transient absorption spectroscopy (FP-TRMC and TAS) revealed that 1D fibers of T2 show 1.75 fold higher charge carrier mobility (9.2 × 10-2 cm2 V-1 s-1) when compared to the array of 2D sheets obtained from T1 (5.0 × 10-2 cm2 V-1 s-1). This simple approach can be extended to design self-assembled organic photoconducting materials for optoelectronic applications.

1D alignment of Co(II) metalated porphyrin-napthalimide based self-assembled nanowires for photocatalytic hydrogen evolution.

The splitting of water into hydrogen and oxygen under visible light is an emerging phenomenon in green energy technology. Nevertheless, selecting an appropriate photocatalyst is rather significant to enhance hydrogen production on a large scale. In this context, organic photocatalysts have received considerable attention owing to their larger surface area, control in diffusion adsorption, nanostructures and electronic properties. Herein, we have developed five either free base or transition metalated porphyrin-napthalimide based donor-acceptor systems (PN1-PN5) and studied their morphology, electronic properties and catalytic behaviour. Detailed studies suggest that the Co(II) substituent D-A system (PN2) displayed a well-aligned one-dimensional (1D) nanowire with high electrical conductivity promoting remarkable photocatalytic hydrogen production rate (18 mM g-1 h-1) when compared to that of porphyrin-based derivatives reported until now. Thus, these results propose to investigate diverse metalated π-conjugated materials as photocatalysts for hydrogen production.

Self-assembly of thienylenevinylene molecular wires to semiconducting gels with doped metallic conductivity.

Oligo(thienylenevinylene) (OTV) based gelators with high conductivity are reported. When compared to OTV1, OTV2 having an increased conjugation length forms relatively strong gels with a metallic conductivity of 4.8 S/cm upon doping which is the highest value reported for an organogelator. This new class of conducting gels is expected to be useful for organic electronics and photonics application, particularly for bulk heterojunction devices.

Solution phase epitaxial self-assembly and high charge-carrier mobility nanofibers of semiconducting molecular gelators.

Trithienylenevinylenes having amide end functional groups form supramolecular gels in nonpolar solvents, comprised of self-assembled nanowires. These gels exhibit the unique property of solution phase epitaxy leading to the alignment of fibers on mica surface. FP-TRMC studies revealed high charge carrier mobility for xerogels from decane-chloroform whereas films obtained from chloroform solutions showed less mobility, highlighting the role of self-assembly and gelation on the electronic properties of semiconducting molecular gelators. This study opens the window for a new class of conducting gelators which may find wide application in organic electronic devices.

Synthesis and Opto-electronic Properties of BODIPY o-OPhos Systems.

Herein, we report the versatile synthetic strategy and opto-electronic properties for the phosphorylation of BODIPY derivatives 5aa-5ak by substituting with an electron-donating/withdrawing group at the ortho position. Nevertheless, this new methodology relatively promotes the tolerance of the aldehyde moiety and the high yield for the synthesis of BODIPY o-OPhos derivatives. The photophysical studies suggest improved optical properties due to the inductive effect of various electron-donating/withdrawing groups. The UV-visible and the emission data suggest that BODIPY o-OPhos derivatives emphasize the property of the excited states with an increase in fluorescence intensity and high quantum yields due to the presence of bulky phospsho-triester at the meso- position which hinders the free rotation around the C-Ar bond and facilitates the development of OLEDs and various organophosphorus warfare agents. Electrochemical studies reveal 5ak depicts the ease of redox activity amongst the 5aa-5ak derivatives. The density functional theory indicates the highest occupied molecular orbital on the BODIPY moiety whereas the lowest unoccupied molecular orbital delocalized on BODIPY and the phospho-triester moieties. Thus, the unique development of the novel BODIPY derivatives with improved optical and redox properties pave the way for fluorescent probes and bioimaging techniques.

Recent Advances on Stimuli-Responsive Smart Materials and their Applications.

Stimuli-responsive materials have raised major attention in digital technology, sensors and biomedical applications owing to quick response towards external stimuli, for example light, voltage, pressure, temperature, mechanical friction and pH. Nevertheless, action of external stimuli on organic materials affects their internal physico-chemical properties and facilitates improved thermal/photo stability, tuning detection sensitivity, accuracy and biocompatibility. This review article highlights recent progress on stimuli-responsive materials with mixed valence species, viologens, twisting chirality, crystalline/amorphous, sol-gel phase transitions and resulting supramolecular nanostructures via non-covalent interactions. These materials can be applied in flexible electronics, drug delivery, detection of pollutants and bioimaging. Thus, the demand for widespread research on development of stimuli-responsive materials are requisite to resolve the challenges pertaining to stability and sensitivity of devices for design in comprehensive technology.