Unidirectional coherent energy transport via conjugated oligo(p-phenylene) chains.

We discovered a way to funnel high-frequency vibrational quanta rapidly and unidirectionally over large distances using oligo(p-phenylene) chains. After mid-IR photon photoexcitation of a -COOH end group, the excess energy is injected efficiently into the chain, forming vibrational wavepackets that propagate freely along the chain. The transport delivers high-energy vibrational quanta with a range of transport speeds reaching 8.6 km/s, which exceeds the speed of sound in common metals (∼5 km/s) and polymers (∼2 km/s). Efficiencies of energy injection into the chain and transport along the chain are found to be very high and dependent on the extent of conjugation across the structure. By tuning the degree of conjugation via electronic doping of the chain, the transport speed and efficiency can be controlled. The study opens avenues for developing materials with controllable energy transport properties for heat management, schemes with efficient energy delivery to hard-to-reach regions, including transport against thermal gradients, and ways for initiating chemical reactions remotely.

C-D Vibration at C2 Position of Imidazolium Cation as a Probe of the Ionic Liquid Microenvironment.

Unlike molecular solvents, imidazolium-based ionic liquids are entirely made of ions with spatial heterogeneity. There is a need for spectroscopic probes that can assess the microenvironment near the cations of these complex liquids. In this manuscript, we describe simple chemical procedures to label the C2 position of imidazolium cation with a C-D vibrational probe and show, through linear and nonlinear vibrational spectroscopies, that this C-D stretching mode can be a useful analytical tool to assess both the solvent microenvironment and solute-solvent interactions in imidazolium-based ionic liquids from the cation point of view. It is expected that this C-D vibration probe on the cation will lead to the development of innovative experimental strategies that can provide a better understanding of such ionic liquids.

Ballistic Energy Transport in Oligomers.

The development of nanocomposite materials with desired heat management properties, including nanowires, layered semiconductor structures, and self-assembled monolayer (SAM) junctions, attracts broad interest. Such materials often involve polymeric/oligomeric components and can feature high or low thermal conductivity, depending on their design. For example, in SAM junctions made of alkane chains sandwiched between metal layers, the thermal conductivity can be very low, whereas the fibers of ordered polyethylene chains feature high thermal conductivity, exceeding that of many pure metals. The thermal conductivity of nanostructured materials is determined by the energy transport between and within each component of the material, which all need to be understood for optimizing the properties. For example, in the SAM junctions, the energy transport across the metal-chain interface as well as the transport through the chains both determine the overall heat conductivity, however, to separate these contributions is difficult. Recently developed relaxation-assisted two-dimensional infrared (RA 2DIR) spectroscopy is capable of studying energy transport in individual molecules in the time domain. The transport in a molecule is initiated by exciting an IR-active group (a tag); the method records the influence of the excess energy on another mode in the molecule (a reporter). The energy transport time can be measured for different reporters, and the transport speed through the molecule is evaluated. Various molecules were interrogated by RA 2DIR: in molecules without repeating units (disordered), the transport mechanism was expected and found to be diffusive. The transport via an oligomer backbone can potentially be ballistic, as the chain offers delocalized vibrational states. Indeed, the transport regime via three tested types of oligomers, alkanes, polyethyleneglycols, and perfluoroalkanes was found to be ballistic, whereas the transport within the end groups was diffusive. Interestingly, the transport speeds via these chains were different. Moreover, the transport speed was found to be dependent on the vibrational mode initiating the transport. For the difference in the transport speeds to be explained, the chain bands involved in the wavepacket formation were analyzed, and specific optical bands of the chain were identified as the energy transporters. For example, the transport initiated in alkanes by the stretching mode of the azido end group (2100 cm(-1)) occurs predominantly via the CH2 twisting and wagging chain bands, but the transport initiated by the C=O stretching modes of the carboxylic acid or succinimide ester end groups occurs via C-C stretching and CH2 rocking bands of the alkane chain. Direct formation of the wavepacket within the CH2 twisting and wagging chain bands occurs when the transport is initiated by the N═N stretching mode (1270 cm-1) of the azido end-group. The transport via optical chain bands in oligomers involves rather large vibrational quanta (700-1400 cm(-1)), resulting in efficient energy delivery to substantial distances. Achieved quantitative description of various energy transport steps in oligomers, including the specific contributions of different chain bands, can result in a better understanding of the transport steps in nanocomposite materials, including SAM junctions, and lead towards designing systems for molecular electronics with a controllable energy transport speed.

Competition of Several Energy-Transport Initiation Mechanisms Defines the Ballistic Transport Speed.

The ballistic regime of vibrational energy transport in oligomeric molecular chains occurs with a constant, often high, transport speed and high efficiency. Such a transport regime can be initiated by exciting a chain end group with a mid-infrared (IR) photon. To better understand the wavepacket formation process, two chemically identical end groups, azido groups with normal, 14N3-, and isotopically substituted, 15N3-, nitrogen atoms, were tested for wavepacket initiation in compounds with alkyl chains of n = 5, 10, and 15 methylene units terminated with a carboxylic acid (-a) group, denoted as 14N3Cn-a and 15N3Cn-a. The transport was initiated by exciting the azido moiety stretching mode, the νN≡N tag, at 2100 cm-1 (14N3Cn-a) or 2031 cm-1 (15N3Cn-a). Opposite to the expectation, the ballistic transport speed was found to decrease upon 14N3 → 15N3 isotope editing. Three mechanisms of the transport initiation of a vibrational wavepacket are described and analyzed. The first mechanism involves the direct formation of a wavepacket via excitation with IR photons of several strong Fermi resonances of the tag mode with the νN═N + νN-C combination state while each of the combination state components is mixed with delocalized chain states. The second mechanism relies on the vibrational relaxation of an end-group-localized tag into a mostly localized end-group state that is strongly coupled to multiple delocalized states of a chain band. Harmonic mixing of νN═N of the azido group with CH2 wagging states of the chain permits a wavepacket formation within a portion of the wagging band, suggesting a fast transport speed. The third mechanism involves the vibrational relaxation of an end-group-localized mode into chain states. Two such pathways were found for the νN≡N initiation: The νN═N mode relaxes efficiently into the twisting band states and low-frequency acoustic modes, and the νN-C mode relaxes into the rocking band states and low-frequency acoustic modes. The contributions of the three initiation mechanisms in the ballistic energy transport initiated by νN≡N tag are quantitatively evaluated and related to the experiment. We conclude that the third mechanism dominates the transport in alkane chains of 5-15 methylene units initiated with the νN≡N tag and the wavepacket generated predominantly at the CH2 twisting band. The isotope effect of the transport speed is attributed to a larger contribution of the faster wavepackets for 14N3Cn-a or to the different breadth of the wavepacket within the twisting band. The study offers a systematic description of different transport initiation mechanisms and discusses the requirements and features of each mechanism. Such analysis will be useful for designing novel materials for energy management.

Band-selective ballistic energy transport in alkane oligomers: toward controlling the transport speed.

Intramolecular transport of vibrational energy in two series of oligomers featuring alkane chains of various length was studied by relaxation-assisted two-dimensional infrared spectroscopy. The transport was initiated by exciting various end-group modes (tags) such as different modes of the azido (ν(N≡N) and ν(N═N)), carboxylic acid (ν(C═O)), and succinimide ester (νas(C═O)) with short mid-IR laser pulses. It is shown that the transport via alkane chains is ballistic and the transport speed is dependent on the type of the tag mode that initiates the transport. The transport speed of 8.0 Å/ps was observed when initiated by either ν(C═O) or νas(C═O). When initiated by ν(N≡N) and ν(N═N), the transport speed of 14.4 ± 2 and 11 ± 4 Å/ps was observed. Analysis of the vibrational relaxation channels of different tags, combined with the results for the group velocity evaluation, permits identification of the chain bands predominantly contributing to the transport for different cases of the transport initiation. For the transport initiated by ν(N≡N) the CH2 twisting and wagging chain bands were identified as the major energy transport channels. For the transport initiated by ν(C═O), the C-C stretching and CH2 rocking chain bands served as major energy transporters. The transport initiated by ν(N═N) results in direct formation of the wave packet within the CH2 twisting and wagging chain bands. These developments can aid in designing molecular systems featuring faster and more controllable energy transport in molecules.

Fully automated dual-frequency three-pulse-echo 2DIR spectrometer accessing spectral range from 800 to 4000 wavenumbers.

A novel dual-frequency two-dimensional infrared instrument is designed and built that permits three-pulse heterodyned echo measurements of any cross-peak within a spectral range from 800 to 4000 cm(-1) to be performed in a fully automated fashion. The superior sensitivity of the instrument is achieved by a combination of spectral interferometry, phase cycling, and closed-loop phase stabilization accurate to ~70 as. The anharmonicity of smaller than 10(-4) cm(-1) was recorded for strong carbonyl stretching modes using 800 laser shot accumulations. The novel design of the phase stabilization scheme permits tuning polarizations of the mid-infrared (m-IR) pulses, thus supporting measurements of the angles between vibrational transition dipoles. The automatic frequency tuning is achieved by implementing beam direction stabilization schemes for each m-IR beam, providing better than 50 µrad beam stability, and novel scheme for setting the phase-matching geometry for the m-IR beams at the sample. The errors in the cross-peak amplitudes associated with imperfect phase matching conditions and alignment are found to be at the level of 20%. The instrument can be used by non-specialists in ultrafast spectroscopy.