Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its Bromo Derivatives: Molecular Structure and Reactivity.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) (isoBBT) is a new electron-withdrawing building block that can be used to obtain potentially interesting compounds for the synthesis of OLEDs and organic solar cells components. The electronic structure and delocalization in benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) were studied using X-ray diffraction analysis and ab initio calculations by EDDB and GIMIC methods and were compared to the corresponding properties of benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole (BBT). Calculations at a high level of theory showed that the electron affinity, which determines electron deficiency, of isoBBT was significantly smaller than that of BBT (1.09 vs. 1.90 eV). Incorporation of bromine atoms improves the electrical deficiency of bromobenzo-bis-thiadiazoles nearly without affecting aromaticity, which increases the reactivity of these compounds in aromatic nucleophilic substitution reactions and, on the other hand, does not reduce the ability to undergo cross-coupling reactions. 4-Bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) is an attractive object for the synthesis of monosubstituted isoBBT compounds. The goal to find conditions for the selective substitution of hydrogen or bromine atoms at position 4 in order to obtain compounds containing a (het)aryl group in this position and to use the remaining unsubstituted hydrogen or bromine atoms to obtain unsymmetrically substituted isoBBT derivatives, potentially interesting compounds for organic photovoltaic components, was not set before. Nucleophilic aromatic and cross-coupling reactions, along with palladium-catalyzed C-H direct arylation reactions for 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), were studied and selective conditions for the synthesis of monoarylated derivatives were found. The observed features of the structure and reactivity of isoBBT derivatives may be useful for building organic semiconductor-based devices.

Palladium-Catalyzed Direct (Het)arylation Reactions of Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole and 4,8-Dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole).

Palladium-catalyzed direct (het)arylation reactions of strongly electron-withdrawing tricyclic benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and its 4,8-dibromo derivative were studied; the conditions for the selective formation of mono- and bis-aryl derivatives were found. The reaction of 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) with thiophenes in the presence of palladium acetate as a catalyst and potassium pivalate as a base, depending on the conditions used, selectively gave both mono- and bis-thienylated benzo-bis-thiadiazoles in low to moderate yields; arenes were found to be inactive in these reactions. It was discovered that direct C-H arylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with bromo(iodo)arenes and -thiophenes in the presence of Pd(OAc)2 and di-tert-butyl(methyl)phosphonium tetrafluoroborate salt is a powerful tool for the selective formation of 4-mono- and 4,8-di(het)arylated benzo-bis-thiadiazoles. Oxidative double C-H hetarylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with thiophenes in the presence of Pd(OAc)2 and silver (I) oxide in DMSO was successfully employed to prepare bis-thienylbenzo-bis-thiadiazoles in moderate yields.

Electronic Configuration Tuning of Centrally Extended Non-Fullerene Acceptors Enabling Organic Solar Cells with Efficiency Approaching 19 .

In the molecular optimizations of non-fullerene acceptors (NFAs), extending the central core can tune the energy levels, reduce nonradiative energy loss, enhance the intramolecular (donor-acceptor and acceptor-acceptor) packing, facilitate the charge transport, and improve device performance. In this study, a new strategy was employed to synthesize acceptors featuring conjugation-extended electron-deficient cores. Among these, the acceptor CH-BBQ, embedded with benzobisthiadiazole, exhibited an optimal fibrillar network morphology, enhanced crystallinity, and improved charge generation/transport in blend films, leading to a power conversion efficiency of 18.94 % for CH-BBQ-based ternary organic solar cells (OSCs; 18.19 % for binary OSCs) owing to its delicate structure design and electronic configuration tuning. Both experimental and theoretical approaches were used to systematically investigate the influence of the central electron-deficient core on the properties of the acceptor and device performance. The electron-deficient core modulation paves a new pathway in the molecular engineering of NFAs, propelling relevant research forward.

New Cycloadditon Reaction of 2-Chloroprop-2-enethioamides with Dialkyl Acetylenedicarboxylates: Synthesis of Dialkyl 2-[4,5-bis(alkoxycarbonyl)-2-(aryl{alkyl}imino)-3(2H)-thienylidene]-1,3-dithiole-4,5-dicarboxylates.

The 1,3-dipolar cycloaddition of 1,2-dithiole-3-thiones with alkynes to form 1,3-dithioles is one of the most studied reactions in this class of polysulfur-containing heterocycles. Nucleophilic substitution of chlorine atoms in dimethyl 2-(1,2-dichloro-2-thioxoethylidene)-1,3-dithiole-4,5-dicarboxylate, which was obtained by addition one molecules of DMAD to 4,5-dichloro-3H-1,2-dithiole-3-thione, led to a series of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides. Cycloaddition reaction of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides with activated alkynes led to the unexpected formation of 2-(thiophen-3(2H)-ylidene)-1,3-dithioles via new intermediate, 1-(1,3-dithiol-2-ylidene)-N-phenylethan-1-yliumimidothioate. Structure of dimethyl 2-(4,5-bis(methoxycarbonyl)-2-(phenylimino)thiophen-3(2H)-ylidene)-1,3-dithiole-4,5-dicarboxylate was finally proven by single crystal X-ray diffraction study. Optimized reaction conditions and a mechanistic rationale for the 1,3-dipolar cycloaddition of novel intermediate are presented.

Efficient Synthesis of 4,8-Dibromo Derivative of Strong Electron-Deficient Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its SNAr and Cross-Coupling Reactions.

An efficient synthesis of hydrolytically and thermally stable 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) by the bromination of its parent heterocycle is reported. The structure of 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) was confirmed by X-ray analysis. The conditions for the selective aromatic nucleophilic substitution of one bromine atom in this heterocyclic system by nitrogen nucleophiles are found, whereas thiols formed the bis-derivatives only. Suzuki-Miyaura cross-coupling reactions were found to be an effective method for the selective formation of various mono- and di(het)arylated derivatives of strong electron-deficient benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and Stille coupling can be employed for the preparation of bis-arylated heterocycles, which can be considered as useful building blocks for the synthesis of DSSCs and OLEDs components.

Novel D-A-π-A1 Type Organic Sensitizers from 4,7-Dibromobenzo[d][1,2,3]thiadiazole and Indoline Donors for Dye-Sensitized Solar Cells.

Two novel D-A-π-A1 metal-free organic dyes of the KEA series containing benzo[d][1,2,3]thiadiazole (isoBT) internal acceptor, indoline donors fused with cyclopentane or cyclohexane rings (D), a thiophene as a π-spacer, and a cyanoacrylate as an anchor part were synthesized. Monoarylation of 4,7-dibromobenzo[d][1,2,3]thiadiazole by Suzuki-Miyamura cross-coupling reaction showed that in the case of indoline and carbazole donors, the reaction was non-selective, i.e., two monosubstituted derivatives were isolated in each case, whereas only one mono-isomer was formed with phenyl- and 2-thienylboronic acids. This was explained by the fact that heterocyclic indoline and carbazole fragments are much stronger donor groups compared to thiophene and benzene, as confirmed by cyclic voltammetry measurements and calculation of HOMO energies of indoline, carbazole, thiophene and benzene molecules. The structure of monoaryl(hetaryl) derivatives was strictly proven by NMR spectroscopy and X-ray diffraction. The optical and photovoltaic properties observed for the KEA dyes showed that these compounds are promising for the creation of solar cells. A comparison with symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 showed that the asymmetric nature of benzo[d][1,2,3]thiadiazole KEA dyes leads to a hypsochromic shift of the ICT band in comparison with the corresponding benzo[c][1,2,5]thiadiazole isomers. KEA dyes have a narrow HOMO-LUMO gap of 1.5-1.6 eV. Amongst these dyes, KEA321 recorded the best power efficiency (PCE), i.e., 5.17%, which is superior to the corresponding symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 (5.07 and 4.90%).

Synthesis and Reactivity of 3H-1,2-dithiole-3-thiones.

3H-1,2-Dithiole-3-thiones are among the best studied classes of polysulfur-containing heterocycles due to the almost explosive recent interest in these compounds as sources of hydrogen sulfide as an endogenously produced gaseous signaling molecule. This review covers the recent developments in the synthesis of these heterocycles, including both well-known procedures and important novel transformations for building the 1,2-dithiole-3-thione ring. Diverse ring transformations of 3H-1,2-dithiole-3-thiones into various heterocyclic systems through 1,3-dipolar cycloaddition, replacement of one or two sulfur atoms to form carbon- and carbon-nitrogen containing moieties, and other unexpected reactions are considered.

Benzothiadiazole vs. iso-Benzothiadiazole: Synthesis, Electrochemical and Optical Properties of D-A-D Conjugated Molecules Based on Them.

This paper presents an improved synthesis of 4,7-dibromobenzo[d][1,2,3]thiadiazole from commercially available reagents. According to quantum-mechanical calculations, benzo[d][1,2,3]thiadiazole (isoBTD) has higher values of ELUMO and energy band gap (Eg), which indicates high electron conductivity, occurring due to the high stability of the molecule in the excited state. We studied the cross-coupling reactions of this dibromide and found that the highest yields of π-spacer-acceptor-π-spacer type compounds were obtained by means of the Stille reaction. Therefore, 6 new structures of this type have been synthesized. A detailed study of the optical and electrochemical properties of the obtained π-spacer-acceptor-π-spacer type compounds in comparison with isomeric structures based on benzo[c][1,2,5]thiadiazole (BTD) showed a red shift of absorption maxima with lower absorptive and luminescent capacity. However, the addition of the 2,2'-bithiophene fragment as a π-spacer resulted in an unexpected increase of the extinction coefficient in the UV/vis spectra along with a blue shift of both absorption maxima for the isoBTD-based compound as compared to the BTD-based compound. Thus, a thorough selection of components in the designing of appropriate compounds with benzo[d][1,2,3]thiadiazole as an internal acceptor can lead to promising photovoltaic materials.

Novel D-A-D Fluorescent Dyes Based on 9-(p-Tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a Donor Unit for Solution-Processed Organic Light-Emitting-Diodes.

New fluorescent D-A-D dyes containing 9-(p-tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a donor unit and 2,1,3-benzochalcogenadiazoles as an electron-withdrawing group were synthesized. The photoluminescent and electroluminescent properties of novel dyes for fluorescent OLED application were investigated. It was demonstrated that the replacement of lightweight heteroatoms by heavier ones enables the fine tuning of the maximum emission without significantly reducing the luminescence quantum yield. The maximum quantum yield value of 62.6% for derivatives based on 2,1,3-benzoxadiazole (1a) in cyclohexane was achieved. Two devices with the architecture of glass/ITO/PEDOT-PSS/poly-TPD/EML/TPBi/LiF/Al (EML = emitting layer) were fabricated to check the suitability of the synthesized compounds as a single active emission layer in OLED. These OLEDs exhibited clear red electroluminescence of the dyes with the maximum current efficiency of 0.85 Cd/A.

Synthesis of 2-((2-(Benzo[d]oxazol-2-yl)-2H-imidazol-4-yl)amino)-phenols from 2-((5H-1,2,3-Dithiazol-5-ylidene)amino)phenols through Unprecedented Formation of Imidazole Ring from Two Methanimino Groups.

A new synthetic pathway to four substituted imidazoles from readily available 2-((4-aryl(thienyl)-5H-1,2,3-dithiazol-5-ylidene)amino)phenols has been developed. Benzo[d]oxazol-2-yl(aryl(thienyl))methanimines were proved as key intermediates in their synthesis. The formation of an imidazole ring from two methanimine derivatives likely includes the opening of one benzoxazole ring followed by ring closure by intermolecular nucleophilic attack of the N-methanimine atom to a carbon atom of another methanimine.

Synthesis and comparison of substituted 1,2,3-dithiazole and 1,2,3-thiaselenazole as inhibitors of the feline immunodeficiency virus (FIV) nucleocapsid protein as a model for HIV infection.

We report the first biological evaluation the 1,2,3-thiaselenazole class of compound and utilising a concise synthetic approach of sulfur extrusion, selenium insertion of the 1,2,3-dithiazoles. We created a small diverse library of compounds to contrast the two ring systems. This approach has highlighted new structure activity relationship insights and lead to the development of sub-micro molar anti-viral compounds with reduced toxicity. The 1,2,3-thiaselenazole represents a new class of potential compounds for the treatment of FIV and HIV.

[1,2,5]Thiadiazolo[3,4-d]Pyridazine as an Internal Acceptor in the D-A-π-A Organic Sensitizers for Dye-Sensitized Solar Cells.

Four new D-A-π-A metal-free organic sensitizers for dye-sensitized solar cells (DSSCs), with [1,2,5]thiadiazolo[3 ,4-d]pyridazine as internal acceptor, thiophene unit as π-spacer and cyanoacrylate as anchoring electron acceptor, have been synthesized. The donor moiety was introduced into [1,2,5]thiadiazolo[3,4-d]pyridazine by nucleophilic aromatic substitution and Suzuki cross-coupling reactions, allowing design of D-A-π-A sensitizers with the donor attached to the internal heterocyclic acceptor not only by the carbon atom, as it is in a majority of DSSCs, but by the nitrogen atom also. Although low values of power conversion efficiency (PCE) were found, a few important consequences were identified: (i) poor PCE data can be attributed to high electron deficiency of the internal [1,2,5]thiadiazolo[3,4-d]pyridazine acceptor due to lower light harvesting by the dye; (ii) the manner in which the donor was attached to the internal acceptor (by carbon or nitrogen) did not play an essential role in the photovoltaic properties of the dyes; (iii) dyes based on the novel donor 2,3,4,4a,9,9a-hexahydro-1H-1,4-methanocarbazolyl and 9-(p-tolyl)-2,3,4,4a,9,9a-hexahydro-1H- carbazole moieties showed similar photovoltaic properties to dyes based on the well-known 4-(p-tolyl)-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indolyl building block, which opens the door for further optimization potential of new dye families.

Safe Synthesis of 4,7-Dibromo[1,2,5]thiadiazolo[3,4-d]pyridazine and Its SNAr Reactions.

A safe and efficient synthesis of 4,7-dibromo[1,2,5]thiadiazolo[3,4-d]pyridazine from the commercial diaminomaleonitrile is reported. Conditions for selective aromatic nucleophilic substitution of one or two bromine atoms by oxygen and nitrogen nucleophiles are found, whereas thiols formed the bis-derivatives only. Buchwald-Hartwig or Ullmann techniques are successful for incorporation of a weak nitrogen base, such as carbazole, into the [1,2,5]thiadiazolo[3,4-d]pyridazine core. The formation of rather stable S…η²-(N=N) bound chains in 4,7-bis(alkylthio)-[1,2,5]thiadiazolo[3,4-d]pyridines makes these compounds promising for the design of liquid crystals.

The Conversion of 5,5'-Bi(1,2,3-dithiazolylidenes) into Isothiazolo[5,4-d]isothiazoles.

Thermolysis of 4,4'-dichloro-, 4,4'-diaryl-, and 4,4'-di(thien-2-yl)-5,5'-bi(1,2,3-dithiazol-ylidenes) affords the respective 3,6-dichloro-, 3,6-diaryl- and 3,6-di(thien-2-yl)isothiazolo[5,4-d]-isothiazoles in low to high yields. The transformation of the 4,4'-diaryl- and 4,4'-di(thien-2-yl)-5,5'-bi(1,2,3-dithiazolylidenes) occurs at lower temperatures in the presence of the thiophiles triphenylphosphine or tetraethylammonium iodide. Optimized reaction conditions and a mechanistic rationale for the thiophile-mediated ring transformation are presented.

New Charge-Transfer Complexes with 1,2,5-Thiadiazoles as Both Electron Acceptors and Donors Featuring an Unprecedented Addition Reaction.

The design and synthesis of novel charge-transfer (CT) complexes are of interest for fundamental chemistry and applications to materials science. In addition to the recently described first CT complex with both electron acceptor (A) and donor (D) groups belonging to the 1,2,5-thiadiazole series (1; A: 4-nitro-2,1,3-benzothiadiazole; D: 4-amino-2,1,3-benzothiadiazole), herein novel CT complexes 2 and 3 with 1,2,5-thiadiazoles as both A (4,6-dinitro-2,1,3-benzothiadiazole and [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole) and D (4-amino-2,1,3-benzothiadiazole) were synthesized. The series is completed by complex 4 with [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole as A and phenoxatellurine as D. Structures of complexes 2-4 were characterized by single-crystal X-ray diffraction (XRD), as well as solution and solid-state UV/Vis spectroscopy. Thermodynamics of their formation were obtained by density functional theory (DFT) calculations, their bonding situations were analyzed by quantum theory of atoms in molecules (QTAIM) calculations and dimer model energies of interactions quantified in the framework of the Hirshfeld surface (HS) analysis. With DFT calculations, the largest value of CT between D and A was found for complex 2, with 0.027 e in the XRD structure and 0.150 e in the optimized structure in MeCN. In the UV/Vis spectra, the λmax of the CT bands of 2-4 varied in the range λ=517-705 nm. Model energy calculations for 1-4 revealed the importance of both dispersion interactions and hydrogen bonding between D and A as contributors to CT in the crystalline state. In an attempt to enlarge the CT value with bis[1,2,5-thiadiazolo][3,4-b;3',4'-e]pyrazine as A and 4-amino-2,1,3-benzoselenadiazole as D, an unprecedented 1:1 addition reaction was observed upon formation of a C-N bond between atom C7 of D and pyrazine atom N4 of A, accompanied by hydrogen atom transfer from C7 to another pyrazine atom N8 (compound 5). According to DFT calculations, the reaction is a multistep process featuring diradical intermediates and hydrogen atom intramolecular migration over four positions. Molecular and crystal structures of 5 (solvate with toluene) were elucidated by XRD and the crystal structure revealed a rather unusual porous framework.

Fused 1,2,3-Thiaselenazoles Synthesized from 1,2,3-Dithiazoles through Selective Chalcogen Exchange.

A new approach to the synthesis of fused 1,2,3-thiaselenazoles-rare five-membered heterocycles that contain two different chalcogens-from the corresponding 1,2,3-dithiazoles and SeO2 was accomplished by selective exchange of S and Se atoms. The fused carbo- and heterocyclic units were indene, naphthalenone, cyclohexadienone, cyclopentadiene, benzoannulene, and benzoxazine. The molecular structures of two of the thiaselenadiazole products and one of the dithiazole precursors were confirmed by single-crystal X-ray diffraction. The reaction is highly solvent selective; it only takes place in solvents that contain a C=O group (e.g., DMF or tetramethylurea). According to DFT calculations, the reaction is thermodynamically favorable. Based on the DFT calculations and 77 Se NMR spectroscopy, two tentative mechanisms that feature isomeric transition states and intermediates are suggested for the reaction via ring-opening addition of SeO2 to the S-X dithiazole bond (X=N or S). The DFT-calculated first adiabatic electron affinities of the compounds were chalcogen independent and positive in all cases, which assumes formation of thermodynamically stable radical anions (RAs). These calculated RAs featured either normal or abnormal elongation of the S1-X2 (X=S or Se) bond relative to their neutral precursors and possessed π* or σ* SOMOs, respectively.

Fused 1,2,3-Dithiazoles: Convenient Synthesis, Structural Characterization, and Electrochemical Properties.

A new general protocol for synthesis of fused 1,2,3-dithiazoles by the reaction of cyclic oximes with S2Cl2 and pyridine in acetonitrile has been developed. The target 1,2,3-dithiazoles fused with various carbocycles, such as indene, naphthalenone, cyclohexadienone, cyclopentadiene, and benzoannulene, were selectively obtained in low to high yields. In most cases, the hetero ring-closure was accompanied by chlorination of the carbocyclic moieties. With naphthalenone derivatives, a novel dithiazole rearrangement (15→13) featuring unexpected movement of the dithiazole ring from α- to ß-position, with respect to keto group, was discovered. Molecular structure of 4-chloro-5H-naphtho[1,2-d][1,2,3]dithiazol-5-one 13 was confirmed by single-crystal X-ray diffraction. Electrochemical properties of 13 were studied by cyclic voltammetry and a complex behavior was observed, most likely including hydrodechlorination at a low potential.

Novel fused tetrathiocines as antivirals that target the nucleocapsid zinc finger containing protein of the feline immunodeficiency virus (FIV) as a model of HIV infection.

A novel series of fused tetrathiocines were prepared for evaluation of activity against the nucleocapsid protein of the feline immunodeficiency virus (FIV) in an in vitro cell culture approach. The results demonstrated that the compounds display potent nanomolar activity and low toxicity against this key model of HIV infection.

Synthesis and Properties of the Heterospin (S1 = S2 = (1)/2) Radical-Ion Salt Bis(mesitylene)molybdenum(I) [1,2,5]Thiadiazolo[3,4-c][1,2,5]thiadiazolidyl.

Low-temperature interaction of [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) with MoMes2 (Mes = mesitylene/1,3,5-trimethylbenzene) in tetrahydrofuran gave the heterospin (S1 = S2 = (1)/2) radical-ion salt [MoMes2](+)[1](-) (2) whose structure was confirmed by single-crystal X-ray diffraction (XRD). The structure revealed alternating layers of the cations and anions with the Mes ligands perpendicular, and the anions tilted by 45°, to the layer plane. At 300 K the effective magnetic moment of 2 is equal to 2.40 µB (theoretically expected 2.45 µB) and monotonically decreases with lowering of the temperature. In the temperature range 2-300 K, the molar magnetic susceptibility of 2 is well-described by the Curie-Weiss law with parameters C and θ equal to 0.78 cm(3) K mol(-1) and -31.2 K, respectively. Overall, the magnetic behavior of 2 is similar to that of [CrTol2](+)[1](-) and [CrCp*2](+)[1](-), i.e., changing the cation [MAr2](+) 3d atom M = Cr (Z = 24) with weak spin-orbit coupling (SOC) to a 4d atom M = Mo (Z = 42) with stronger SOC does not affect macroscopic magnetic properties of the salts. For the XRD structure of salt 2, parameters of the Heisenberg spin-Hamiltonian were calculated using the broken-symmetry DFT and CASSCF approaches, and the complex 3D magnetic structure with both the ferromagnetic (FM) and antiferromagnetic (AF) exchange interactions was revealed with the latter as dominating. Salt 2 is thermally unstable and slowly loses the Mes ligands upon storage at ambient temperature. Under the same reaction conditions, interaction of 1 with MoTol2 (Tol = toluene) proceeded with partial loss of the Tol ligands to afford diamagnetic product.

Direct Exchange of Oxygen and Selenium Atoms in the 1,2,5-Oxadiazoles and 1,2,5-Selenadiazoles by Action of Sulfur Monochloride.

A short synthetic approach to fused 1,2,5-thiadiazoles from the corresponding 1,2,5-oxadiazoles and 1,2,5-selenadiazoles has been developed. Mono- and bis(1,2,5-thiadiazoles) were selectively obtained in high yields. The pathways for these novel reactions were discussed.