Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review.

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Optimization of Wall Material of Freeze-Dried High-Bioactive Microcapsules with Yellow Onion Rejects Using Simplex Centroid Mixture Design Approach Based on Whey Protein Isolate, Pectin, and Sodium Caseinate as Incorporated Variables.

For the food sector, onion rejects are an appealing source of value-added byproducts. Bioactive compounds were recovered from yellow onion rejects using a pulse electric field process at 6000 v and 60 pulses. The onion extract was encapsulated with whey protein isolate (WPI), pectin (P), and sodium caseinate (SC) with a mass ratio of 1:5 (extract/wall material, w/w). A Simplex lattice with augmented axial points in the mixture design was applied for the optimization of wall material for the encapsulation of onion reject extract by freeze-drying (FD). The optimal wall materials were 47.6 g/100 g (SC), 10.0 g/100 g (P), and 42.4 g/100 g (WPI), with encapsulation yield (EY) of 85.1%, total phenolic content (TPC) of 48.7 mg gallic acid equivalent/g DW, total flavonoid content (TFC) of 92.0 mg quercetin equivalent/g DW, and DPPH capacity of 76.1%, respectively. The morphological properties of the optimal encapsulate demonstrated spherical particles with a rough surface. At optimal conditions, the minimum inhibitory concentration (MIC) of the extract (mean diameter of inhibition zone: 18.8 mm) was shown as antifungal activity against Aspergillus niger.

Evaluation of Changes in Protein Quality of High-Pressure Treated Aqueous Aquafaba.

Chickpea cooking water (CCW), known as aquafaba, has potential as a replacement for egg whites due to its emulsion and foaming properties which come from the proteins and starch that leach out from chickpeas into the cooking water. High pressure (HP) processing has the ability to modify the functional characteristics of proteins. It is hypothesized that HP processing could favorably affect the functional properties of CCW proteins by influencing their structure. The objective of this study to evaluate the effect of HP treatment on the associated secondary structure, emulsion properties and thermal characteristics of CCW proteins. A central composite rotatable design is used with pressure level (227-573 MPa) and treatment time (6-24 min) as HP variables, and concentration of freeze dried CCW aquafaba powder (11-29%) as product variable, and compared to untreated CCW powder. HP improves aquafaba emulsion properties compared to control sample. HP reduces protein aggregates by 33.3%, while ß-sheets decreases by 4.2-87.6% in which both correlated to increasing protein digestibility. α-helices drops by 50%. It affects the intensity of some HP treated samples, but not the trend of bands in most of them. HP treatment decreases Td and enthalpy because of increasing the degree of denaturation.

Effect of microencapsulation on antioxidant and antifungal properties of aqueous extract of pomegranate peel.

The aqueous extract of pomegranate (Punica granatum L.) peel compounds was freeze-dried (FDPOPx) and encapsulated using two wall forming components at two concentrations (maltodextrin: MDX and ß-cyclodextrin: ßCDX; 5 and 10%) with a mass ratio of 1:5 (extract/wall material). Different properties of the encapsulated powders (bioactive components, physicochemical and morphological properties) and storage stability of prepared microcapsules were evaluated during 42 days of storage at a different relative humidity (52 and 75%) and temperatures (4 and 25 °C). Encapsulated powder with ßCDX-10% had the highest total phenolic compounds (TPC: 58.78 mg GA/g) and antioxidant capacity [FRAP: 1414.76 µmol Fe2+/g and DPPH assay (RSA): 77.83%] among other wall materials. The amounts of TPC and their antioxidant capacity decreased during the 42 days of storage. However, the highest TPC was observed in the freeze-dried MDX-10%  % encapsulated powder at 4 °C storage temperature and 52% relative humidity with a half-life (t1/2) of 81 days, the reaction rate constant (k) of 0.85 × 10-2 min-1 and the glass transition temperature of 69.73 °C. In addition, the polyphenolic extracts (both free and encapsulated) were able to control the growth of yeasts and molds, and maintaining the sensory properties of cupcakes as the model food system. The lowest growth after 9 days of storage of cupcake was observed in samples prepared with 1.5% of microencapsulated powder (MDX-10%) which was equivalent to the effect of the chemical preservative potassium sorbate.

Microwave Processing: Current Background and Effects on the Physicochemical and Microbiological Aspects of Dairy Products.

Overheating is still a major problem in the use of conventional heating for milk and various dairy products, because it leads to the lowering of quality and sensory and nutritional values. Microwave (MW) heating has been credited with providing superior-quality dairy-based products with extended shelf-life, representing a good alternative to conventional heat treatment. The main drawback of MW heating refers to nonuniform temperature distribution, resulting in hot and cold spots mainly in solid and semisolid products; however, MW heating has been shown to be suitable for liquid foods, especially in a continuous fluid system. This review aims to describe the main factors and parameters necessary for the application of MW heating technology for dairy processing, considering the theoretical fundamentals and its effects on quality and safety aspects of milk and dairy products. MW heating has demonstrated great ability for the destruction of pathogenic/spoilage microorganisms and their spores, and also inactivation of enzymes, thereby preserving fresh characteristics of dairy products.

Effect of feed components on quality parameters of wheat-tef-sesame-tomato based extruded products.

Wheat flour is one of the principal ingredients in extruded wheat products. Wheat-based extruded products have relatively low protein and high gluten contents as well as a high glycemic index. Incorporation of nutrient-rich supplements could overcome those limitations. A D-optimal statistical experimental design was used to develop high-value and nutrient-rich extruded products by supplementing wheat flour (WF), with tef flour (TF), sesame protein concentrate (SPC) and tomato powder (TM). Effects of feed compositions on physical and functional properties of the extruded products were evaluated and modeled using an artificial neural network (ANN). SPC contributed to elevate the protein and simultaneously lower the carbohydrate content of the extruded products while TF and TM contributed to improving crude fiber and antioxidant properties. Evaluated physicochemical properties were adequately predicted by the ANN models (R2 = 0.979-0.998) with root mean square error of less than 0.008. Physical properties and sensorial evaluation correlated well and revealed that TF, SPC and TP addition to wheat flour produced distinct extruded products rich in protein and antioxidants with lowered carbohydrate and gluten contents.

Heat transfer phenomena during thermal processing of liquid particulate mixtures-A review.

During the past few decades, food industry has explored various novel thermal and non-thermal processing technologies to minimize the associated high-quality loss involved in conventional thermal processing. Among these are the novel agitation systems that permit forced convention in canned particulate fluids to improve heat transfer, reduce process time, and minimize heat damage to processed products. These include traditional rotary agitation systems involving end-over-end, axial, or biaxial rotation of cans and the more recent reciprocating (lateral) agitation. The invention of thermal processing systems with induced container agitation has made heat transfer studies more difficult due to problems in tracking the particle temperatures due to their dynamic motion during processing and complexities resulting from the effects of forced convection currents within the container. This has prompted active research on modeling and characterization of heat transfer phenomena in such systems. This review brings to perspective, the current status on thermal processing of particulate foods, within the constraints of lethality requirements from safety view point, and discusses available techniques of data collection, heat transfer coefficient evaluation, and the critical processing parameters that affect these heat transfer coefficients, especially under agitation processing conditions.

Effect of reciprocating agitation thermal processing (RA-TP) on quality of canned tomato (Solanum lycopersicum) puree.

BACKGROUND: Reciprocating agitation thermal processing (RA-TP) is a recent innovation in the field of canning for obtaining high-quality canned food. The objective of this study was to compare RA-TP processing with conventional non-agitated (still) processing with respect to the impact on quality (color, antioxidant capacity, total phenols, carotenoid and lycopene contents) of canned tomato (Solanum lycopersicum) puree. RESULTS: Owing to a 63-81% reduction in process times as compared with still processing, tomato puree with a brighter red color (closer to fresh) was obtained during RA-TP. At 3 Hz reciprocation frequency, the loss of antioxidant, lycopene and carotenoid contents could be reduced to 34, 8 and 8% respectively as compared with 96, 41 and 52% respectively during still processing. In fact, the phenolic content for RA-TP at 3 Hz was 5% higher than in fresh puree. Quality retention generally increased with an increase in frequency, although the differences were less significant at higher reciprocation frequencies (between 2 and 3 Hz). CONCLUSION: Research findings indicate that RA-TP can be effective to obtain thermally processed foods with high-quality attribute retention. It can also be concluded that a very high reciprocation frequency (>3 Hz) is not necessarily needed and significant quality improvement can be obtained at lower frequencies (∼2 Hz). © 2016 Society of Chemical Industry.

Effects of locust bean gum on the structural and rheological properties of resistant corn starch.

In this study, interactions between resistant corn starch (RS) (5% w/w) and locust bean gum (LBG) (0, 0.125, 0.25, 0.50 and 1.0% w/v) on the viscoelastic, pasting and morphological characteristics of aqueous dispersions were evaluated. Results showed that the storage modulus (G'), loss modulus (G''), and apparent viscosity values of starch/gum (RS/LBG) mixtures were enhanced with the addition of LBG, and the rheograms demonstrated a biphasic behavior. RS/LBG samples were predominantly either solid like (G' > G'') or viscous (G'' > G'), depending on the added concentration level of LBG. Gum addition also caused higher peak viscosity, breakdown and total set back of RS/LBG mixtures. A strong correlation between rheological and structural properties was found. Confocal laser scanning microscopy (CLSM) images confirmed the transition of starch particles from a scattered angular shape to clustered structures cross-linked by dense aggregate junction zones justifying the observed changes in rheological properties.

Recycling of osmotic solutions in microwave-osmotic dehydration: product quality and potential for creation of a novel product.

BACKGROUND: Despite osmotic dehydration being a cost effective process for moisture removal, the cost implications of making, regenerating, and properly disposing of the spent osmotic solutions contributes greatly to the economic feasibility of the drying operation. The potential for recycling of osmotic solutions and their use for creation of a novel product was explored using microwave-osmotic dehydration under continuous flow spray (MWODS) conditions. RESULTS: Identical runs were repeated 10 times to determine the progressive physical and compositional effects of the thermal treatment and leaching from the cranberry samples. The microbiological stability and constant drying performance indicated that MWODS would be well suited for employing recycled solutions. While the anthocyanin content of the solution never approached that of cranberry juice concentrate, it is demonstrated that the spent syrup can infuse these health positive components into another product (apple). CONCLUSION: This study found that re-using osmotic solutions is a viable option to reduce cost in future MWODS applications, with no detriment to product quality and potential to use the spent solution for novel products. © 2015 Society of Chemical Industry.

Effect of Soybean Oil on the Improvement of the Functionality of Edible Membrane-Type Food Packaging Films Based on Caseinate-Carboxymethyl Chitosan Compositions.

Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate-carboxymethyl chitosan (CA-CMCH) composite films were made with the incorporation of soybean oil (SO) using a casting technique. The influence of different soybean oil concentrations at 0, 0.5, and 1% (w/w) on physical, mechanical, barrier, and surface characteristics of films composed of caseinate-carboxymethyl chitosan (CA-CMCH) was evaluated. The brightest film (L* value of 95.95 ± 0.30) was obtained with the edible film made from the control group of samples with sodium caseinate (NaCA-100; 100% NaCA). The results also indicated that samples with 1% SO in NaCA-75 and CaCA-75 had lower water vapor permeability (WVP), while those with NaCA-50 and CaCA-50 showed higher values of WVP. For mechanical properties, this study found that incorporating soybean oil into the caseinate-carboxymethyl (CA-CMCH) composite films led to an enhancement of both tensile strength and elongation at break. The morphological structures, determined using SEM, of control and composite films showed compact and homogenous surfaces. Overall, the addition of soybean oil contributed to the improvement of the functional properties of the edible films, offering potential solutions to the environmental issues associated with plastic packaging and enhancing the safety and performance of food packaging.

Regulation of the Ice â to Ice III high pressure phase transition meta-stability in milk and its bactericidal effects.

This study was focused on a novel approach of creating perturbations under high pressure (HP) meta-stable Ice Ⅰ to Ice Ⅲ phase transition and its bactericidal effects. Experiments were carried out under subzero high pressure processing conditions using Escherichia coli suspended in milk, and the microbial inactivation before and after the meta-stable state regulation was compared. The phase transition position of unperturbed milk was 302 MPa/-37.5 °C. The volume change resulting from the phase transition was employed as the perturbation mechanism. Glucose (5 %, 20 %) and sodium chloride solutions (5 %, 20 %) were used as regulatory sources. Glucose solutions accelerated the phase change of the milk better than the sodium chloride solution and resulted in an optimum phase transition position of milk at 243 MPa/-30.6 °C. The induced perturbations accelerated meta-stable transformation and enhanced the microbial destruction. At 330 MPa/3s, compared to the unfrozen samples, the lethality of E. coli in the frozen-regulated samples significantly increased by 1.79 log. The relationship between the E. coli inactivation within the phase change pressure range and the pressure was not continuous, but a segmented one, both before and after meta-stable state regulation. A higher level of E. coli destruction was accomplished by a 5 min pressure-holding of frozen samples at 220 MPa and 280 MPa as compared to the one-pulse and two-pulses treatments without holding time. The maximum lethality of 6.73 log was achieved at 280 MPa/5 min in the frozen-regulated application.

Effects of high-pressure processing on the physicochemical and adsorption properties, structural characteristics, and dietary fiber content of kelp (Laminaria japonica).

To investigate the effects of high-pressure processing (HPP) on the physicochemical and adsorption properties and structural characteristics of kelp, kelp slice (KS) and kelp powder (KP) were treated under different pressures (300, 450, and 600 MPa) for 5 and 10 min. Compared to untreated KP, HPP-treated KP yielded a 1.31-fold increase in water holding capacity (600 MPa/5 min), a 0.12-fold increase in swelling capacity (450 MPa/10 min), a 1.33-fold increase in oil holding capacity (600 MPa/10 min), a 10-fold increase in glucose adsorption capacity (450 MPa/10 min), and a 0.22-fold increase in cholesterol adsorption capacity (163.1 mg/g DW at 450 MPa/10 min), and exhibited good Cd (Ⅱ) adsorption capacity when its concentration was 10 mmol/L in the small intestine. The physicochemical properties of HPP-treated KS were not improved due to its low specific surface area. In addition, HPP treatment efficiently reduced the particle size of KP and increased its total and soluble dietary fiber content by 17% and 63% at 600 MPa/10 min, respectively. Scanning electron microscope micrographs demonstrated that the surface of HPP-treated KP was rough and porous, and the specific surface area increased with increasing pressure and processing time. To conclude, the results obtained in the present study suggest that HPP is a promising processing method for improving the functionality and structural characteristics of KP and provide a theoretical basis for the utilization of HPP-treated KP as a fiber-rich ingredient in the functional food industry.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review.

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

An Automated Image Processing Module for Quality Evaluation of Milled Rice.

The paper demonstrates a low-cost rice quality assessment system based on image processing and machine learning (ML) algorithms. A Raspberry-Pi based image acquisition module was developed to extract the structural and geometric features from 3081 images of eight different varieties of rice grains. Based on features such as perimeter, area, solidity, roundness, compactness, and shape factor, an automatic identification system is developed to segment the grains based on their types and classify them by using seven machine learning algorithms. These ML models are trained using the images and are compared using different ML models. ROC curves are plotted for each model for quantitative analysis to assess the model's performance. It is concluded that the random forest classifier presents an accuracy of 77 percent and is the best-performing model for the classification of rice varieties. Furthermore, the same algorithm is efficiently employed to determine the price of adulterated rice samples based upon the market price of individual rice.

Antibacterial activity and improvement of the oxidative stability of soybean oil by 4-hydroxybenzyl isothiocyanate from white mustard seeds.

4-Hydroxybenzyl isothiocyanate (4-HBITC) is one of the most important secondary metabolite products in white mustard seeds. The antibacterial activity and inhibition of lipid oxidation of 4-HBITC were investigated. The results indicated that 4-HBITC had a significant antibacterial effect on Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium, and its effect on gram-positive bacteria was superior to that on gram-negative bacteria. The combination of 4-HBITC with citric acid or ascorbic acid had a better antibacterial effect than adding them alone. The antibacterial mechanism of 4-HBITC to affect the metabolic activity rather than the integrity or the permeability of cell membranes was identified. In addition, white mustard seed extract which contains 4-HBITC was found to extend the oxidative stability of soybean oil, and this effect was also improved after the combination of 4-HBITC with citric acid. These results indicated that 4-HBITC and white mustard seed extract have potential for application as a natural preservatives in food and for improving the oxidative stability of edible oils.

Facilitation of metastable ice â - ice III phase transition of liquid foods at high-pressure sub-zero temperature by perturbation.

In this study, the distribution of ice Ⅰ - ice III phase transition positions and its influencing factors on various fruit juices and food model solutions under high pressure (HP) were investigated. In addition, the effect of perturbation on induction of phase change in metastable apple juice was also explored. The phase transition positions of fruit juice samples deviated far from the theoretical value (210 MPa/ -21 °C), with pressure in range of 268 âˆ¼ 305 MPa and temperature between -31.09 °C and -37.21 °C, with the most extreme phase transition position of 305 MPa/ -37.21 °C for apple juice. The phase change position was affected by the type of solution but not by the concentration of solutions. The cooling media namely, sodium chloride (5%, 20%) and glucose solution (5%, 20%) were used as perturbation sources to stimulate the metastable apple juice by using instantaneous volume reduction during the ice Ⅰ - ice III phase transition. They successfully promoted the phase transition of apple juice, where 20% sodium chloride solution significantly (p < 0.05) reduced the phase change pressure of apple juice to 239 MPa. The perturbation effect was influenced by the type and concentration of the perturbation source, the composition of the cavity area and the softness of the sample container.

Formation of hydroxyphenyl-pyranoanthocyanins derived from cyanidin-3-O-glucoside and effects of high-pressure processing on the transformation efficiency.

Hydroxyphenyl-pyranoanthocyanins (PACNs), derived from anthocyanins (ACNs) reacted with hydroxycinnamic acids, have higher practical application value because of better physicochemical stability than their precursors. However, the slow formation rate restricted their broader applications. In the present study, cyanidin-3-O-glucoside (C3G) was chosen to react with four kinds of hydroxycinnamic acids in a model solution. Changes of color and the production of hydroxyphenyl-PACNs were monitored. The formation of derivatives was time-dependent, and the orange-yellow changing trend was correlated with the formation of PACNs and the consumption of C3G. In addition, high-pressure processing (HPP) as a widely-used non-thermal processing method in the food industry was conducted to investigate its impact on hydroxyphenyl-PACNs formation. The results showed that HPP significantly improves the yield of two types of hydroxyphenyl-PACNs (C3G-4-vinylcatechol and C3G-4-vinylphenol) and the retention of total residual pigments during 56 days of storage. Therefore, HPP contributed to color-protecting and the transformation of hydroxyphenyl-PACNs.

Recent Progress in the Synergistic Bactericidal Effect of High Pressure and Temperature Processing in Fruits and Vegetables and Related Kinetics.

BACKGROUND: Traditional thermal processing is a widely used method to ensure food safety. However, thermal processing leads to a significant decline in food quality, especially in the case of fruits and vegetables. To overcome this drawback, researchers are extensively exploring alternative non-thermal High-Pressure Processing (HPP) technology to ensure microbial safety and retaining the sensory and nutritional quality of food. However, HPP is unable to inactivate the spores of some pathogenic bacteria; thus, HPP in conjunction with moderate- and low-temperature is employed for inactivating the spores of harmful microorganisms. Scope and approach: In this paper, the inactivation effect of high-pressure and high-pressure thermal processing (HPTP) on harmful microorganisms in different food systems, along with the bactericidal kinetics model followed by HPP in certain food samples, have been reviewed. In addition, the effects of different factors such as microorganism species and growth stage, process parameters and pressurization mode, and food composition on microbial inactivation under the combined high-pressure and moderate/low-temperature treatment were discussed. KEY FINDINGS AND CONCLUSIONS: The establishment of a reliable bactericidal kinetic model and accurate prediction of microbial inactivation will be helpful for industrial design, development, and optimization of safe HPP and HPTP treatment conditions.

Effect of Emulsion Particle Size on the Encapsulation Behavior and Oxidative Stability of Spray Microencapsulated Sweet Orange Oil (Citrus aurantium var. dulcis).

Three different feed emulsions of different particle sizes were mixed with a modified starch and maltodextrin and spray dried to make a large (LP), small (SP), and nano-size encapsulated powder (NP), respectively. Emulsion size, oil content, loading capacity (LC), encapsulation efficiency (EE), water content, aw, scanning electron microscopy (SEM), glass transition temperature (Tg), as well as d-limonene release characteristic and limonene oxide formation rate during 37 °C and various aw storage were determined. With the increase of the feed emulsion size, the reconstituted emulsion size of the LP tended to increase and change to a bimodal distribution. The surface oil content increased with the increasing size of the reconstituted emulsion, and the opposite was true for EE. The smaller the reconstituted emulsion size, the higher Tg during a low aw condition. The Tg of the LP, SP and NP were 62, 88, and 100 °C, respectively, and NP > SP > LP. The release and the oxidative rate of d-limonene was the lowest for the NP and then increased for the SP and LP. The release and oxidative rates increased with the elevation of aw and peaked at 0.33. The powder surface morphological structure was intact, the spray-dried powder was more stable, and microstructure changed from a glass state to a rubbery state during storage.