Mupirocin-Loaded Chitosan Microspheres Embedded in Piper betle Extract Containing Collagen Scaffold Accelerate Wound Healing Activity.

This study reports the formulation of mupirocin-loaded chitosan microspheres embedded in Piper betle extract containing collagen scaffold as combinational drug delivery for improved wound healing. Selection of chitosan type (molecular weight and degree of deacetylation) was carried out based on their antibacterial efficacy. The low molecular weight chitosan was selected owing to the highest antibacterial action against gram-positive as well as gram-negative bacteria. Low molecular weight chitosan-microspheres showed spherical shape with largely smooth surface morphology, 11.81% of mupirocin loading, and its controlled release profile. The XRD, DSC thermograms, and FT-IR spectral analysis revealed the mupirocin loaded in molecularly dispersed or in amorphous form, and having no chemical interactions with the chitosan matrix, respectively. The in vivo study indicates potential effect of the mupirocin, Piper betle, and chitosan in the collagen scaffold in the wound healing efficiency with approximately 90% wound healing observed at the end of 15 days of study for combinational drug-loaded chitosan microspheres-collagen scaffold-treated group. The histopathology examination further revealed tissue lined by stratified squamous epithelium, collagen deposition, fibroblastic proliferation, and absence of inflammation indicating relatively efficient wound healing once treated with combinational drug-loaded chitosan microspheres containing scaffold.

MicroRNAs in ovarian cancer and recent advances in the development of microRNA-based biosensors.

Ovarian cancer is the most aggressive of all gynaecological malignancies and is the leading cause of cancer-associated mortality worldwide. Over the recent years, there has been a sharp increase in this mortality rate, mostly due to late diagnosis, which can be attributed to the lack of an early and specific biomarker. Under this scenario, recent interest has shifted towards ovarian cancer associated miRNAs which play strong regulatory roles in various cellular processes. miRNAs have emerged as promising non/minimally invasive cancer biomarkers for improved diagnostic, prognostic and streamlined therapeutic applications. A large number of miRNA assays have been reported that are based on nucleic acid detection-based techniques such as RT-qPCR, microarrays and RNA sequencing methods. Despite demonstrating commendable analytical performances, these laboratory-based techniques are expensive and hence not ideally suited for routine use in resource-limited settings. In recent years, considerable attention has been dedicated to the development of relatively simple, rapid and inexpensive miRNA biosensor strategies. Among these, electrochemical sensors have shown a great promise towards point-of-care diagnostics, due to their inherent advantages such as simplicity, sensitivity, amenability to high levels of multiplexing as well as low cost. In this paper, we provide an overview of the potential role of miRNAs in ovarian cancer, as well as recent advances in the development of nanotechnology-based, optical, and electrochemical biosensing-strategies for miRNA detection.

Synthesis of Self-Assembled Randomly Oriented VO2 Nanowires on a Glass Substrate by a Spin Coating Method.

Randomly oriented vanadium dioxide (VO2) nanowires were produced on a glass substrate by spin coating from a cosolvent. SEM studies reveal that highly dense VO2 nanowires were grown at an annealing temperature of 400 °C. X-ray diffraction (XRD) provides evidence of the high crystallinity of the VO2 nanowires-embedded VO2 thin films on the glass substrate at 400 °C. Characterization by high-resolution transmission electron microscopy (HR-TEM) confirmed the formation of VO2 nanowires. The optical band gap of the nanowires-embedded VO2 thin films was also calculated from the transmittance data to be 2.65-2.70 eV. The growth mechanism of the solution-processed semiconducting VO2 nanowires was proposed based on both solvent selection and annealing temperature. Finally, the solar water splitting ability of the VO2 nanowires-embedded VO2 thin films was demonstrated in a photoelectrochemical cell (PEC).

Analysis of a "3-(Naphthalen-1-ylimino) Indoline-2-one" compound and Its Antimicrobial Assessment Using Lipid-based Self-nanoemulsifying Formulations.

In recent years, indole derivatives have acquired conspicuous significance due to their wide spectrum of biological activities-antibacterial, antiviral, and anticonvulsant. This compound is derived from naturally grown plants. Therefore, synthesis of a novel "3-(Naphthalen-1-ylimino) indoline-2-one" compound (2) and its analysis using UPLC systems along with antimicrobial assessment was the aim of the current study. Isatin was used as a parent drug for synthesizing compound (2). Liquid Chromatographic analysis was performed using a C18 BEH column (1.7 µm 2.1 × 50 mm) by UPLC systems. Degradation studies were carried out to see whether acid, base, thermal, and oxidizing agents had any impact on the synthesized molecule in stress conditions (100 °C). A lipid-based self-nanoemulsifying formulation was developed and selectivity, specificity, recovery, accuracy, and precision were measured as part of the UPLC system's validation process. Antimicrobial studies were conducted using gram-positive and gram-negative bacteria. The standard samples were run with a concentration range of 5.0-100.0 µg/mL using the isocratic mobile phase comprising of methanol/water (70/30 %v/v) at 234 nm; good linearity (R2 = 0.9998) was found. The lower limits of detection (LOD) and quantitation (LOQ) of the method were found to be 0.81 µg/mL and 2.5 µg/mL, respectively. The coefficients of variation were found to be less than 2%. The antimicrobial study suggests that compound (2) has a substantial growth effect against gram-negative bacteria. It was successfully synthesized and applied to measure the concentrations in lipid-based dosage form, along with potent antimicrobial activities.

Identification of new major histocompatibility complex-B Haplotypes in Bangladesh native chickens.

OBJECTIVE: The major histocompatibility complex in chicken demonstrates a great range of variations within varities, breeds, populations and that can eventually influence their immuneresponses. The preset study was conducted to understand the major histocompatibility complex-B (MHC-B) variability in five major populations of Bangladesh native chicken: Aseel, Hilly, Junglefowl, Non-descript Deshi, and Naked Neck. METHODS: These five major populations of Bangladesh native chicken were analyzed with a subset of 89 single nucleotide polymorphisms (SNPs) in the high-density MHC-B SNP panel and Kompetitive Allele-Specific polymerase chain reaction genotyping was applied. To explore haplotype diversity within these populations, the results were analyzed both manually and computationally using PHASE 2.1 program. The phylogenetic investigations were also performed using MrBayes program. RESULTS: A total of 136 unique haplotypes were identified within these five Bangladesh chicken populations, and only one was shared (between Hilly and Naked Neck). Phylogenetic analysis showed no distinct haplotype clustering among the five populations, although they were shared in distinct clades; notably, the first clade lacked Naked Neck haplotypes. CONCLUSION: The present study discovered a set of unique MHC-B haplotypes in Bangladesh chickens that could possibly cause varied immune reponses. However, further investigations are required to evaluate their relationships with global chicken populations.

Spanlastics as a Potential Approach for Enhancing the Nose-To-Brain Delivery of Piperine: In Vitro Prospect and In Vivo Therapeutic Efficacy for the Management of Epilepsy.

The present study delineates the preparation of piperine-loaded spanlastics (PIP-SPL) to improve piperine (PIP) solubility, bioavailability, and permeation through nasal mucosa for intranasal delivery. PIP-SPL was formulated using the thin-film hydration method and optimization was performed using Box-Behnken design (BBD). PIP-SPL optimized formulation (PIP-SPLopt) was characterized for polydispersity index (PDI), vesicle size, entrapment efficiency, zeta potential, and in vitro PIP release. For further evaluation, blood-brain distribution study, transmission electron microscopy (TEM), nasal permeation study, and confocal scanning laser microscopy (CLSM) were performed withal. The PIP-SPLopt presented spherical and sealed shape vesicles with a small vesicle size of 152.4 nm, entrapment efficiency of 72.93%, PDI of 0.1118, and in vitro release of 82.32%. The CLSM study unveiled that the developed formulation has greater permeation of PIP across the nasal mucosa in comparison with the PIP suspension. The blood-brain distribution study demonstrated higher Cmax and AUC0-24h of PIP-SPL via the intranasal route in comparison to PIP-SPL via oral administration. The in vivo study revealed that the PIP-SPL has good antiepileptic potential in comparison with the standard diazepam, which was evinced by seizure activity, neuromuscular coordination by rotarod test, biochemical estimation of oxidative stress markers, and histopathological studies. Furthermore, nasal toxicity study confirm that the developed PIP-SPL formulation is safer for intranasal application. The current investigation corroborated that the prepared spanlastic vesicle formulation is a treasured carrier for the PIP intranasal delivery for the management of epilepsy.

Nanotransethosomes for enhanced transdermal delivery of mangiferin against rheumatoid arthritis: formulation, characterization, invivo pharmacokinetic and pharmacodynamic evaluation.

The present research study limns the preparation of MNF loaded transethosomes (MNF-TE) to improve MNF solubility, bioavailability and permeation through skin layers for transdermal delivery. MNF-TE was formulated using thin-film hydration method and optimization was done using Box-Behnken design (BBD). MNF-TEopt was characterized for Polydispersity index (PDI), vesicle size, entrapment efficiency, zeta potential and in vitro MNF release. For further evaluation, Pharmacokinetic study, Transmission electron microscopy (TEM), Skin permeation study and Confocal scanning laser microscopy (CLSM) were performed withal. The MNF-TEopt presented spherical and sealed shape vesicles with small vesicle size of 148.6 nm, entrapment efficiency of 74.23%, PDI of 0.1139 and in vitro release of 65.32%. The CLSM study unveiled that the developed formulation has greater permeation of MNF across the skin layers in comparison with the MNF suspension gel. The pharmacokinetic study demonstrated Cmax and AUC0-24 h of 6.94 ± 0.51 µg/ml and 43.92 ± 7.90 µg.h/ml via transdermal route in comparison to Cmax and AUC0-24 h of 3.74 ± 1.91 µg/ml and 22.96 ± 9.76 µg.h/ml presented by MNF-TE oral administration. The in vivo study revealed that the MNF-TE gel has good anti-arthritic potential in comparison with the standard diclofenac gel which was evinced by radiographic analysis and histopathological studies. Further, skin irritation study on Wistar albino rats confirm that the developed MNF-TE formulation is safer for skin application. The current investigation corroborated that the prepared TE vesicle formulation is a treasured carrier for the MNF transdermal delivery for the management of rheumatoid arthritis.

Evaluating the Release of Different Commercial Orally Modified Niacin Formulations In Vitro.

OBJECTIVES: To evaluate the release profile of different modified-release oral formulations of niacin, such as immediate-release (IR) powder and tablets, timed-release (TR) caplets, extended-release (ER) capsules, and controlled-release (CR) tablets, to assure their defined release pattern and correlate this release with their matrix polymers. SIGNIFICANCE: Niacin is used to manage hyperlipidemia by reducing cutaneous flushing and hepatotoxicity adverse events. The release profiles of different types of modified-release dosage forms depend on the types of coating materials (polymers) used in the matrix formation. Although different types of niacin formulations exist, none of the niacin dissolution profiles have been evaluated and compared in the literature. METHODS: Four commercial orally modified-release niacin brands were collected from a local CVS pharmacy retail store, in Miami, FL, USA. The in vitro release study was conducted in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) conditions. RESULTS: The results of the release patterns of four niacin-modified dosage forms (IR, ER, TR, and CR) were aligned with their release definitions. However, the CR dosage form did not follow an ideal release pattern. CONCLUSIONS: The release rate of niacin in vitro was pH dependent, which was confirmed by the similarity factor (f2) results. All the f2 comparison values were below 50 in both the SIF and SGF media, while all the comparisons were below the f2 values for all brands in the SIF media.

Linalool-Incorporated Synergistically Engineered Modified Liposomal Nanocarriers for Enhanced Transungual Delivery of Terbinafine against Onychomycosis.

This work investigates the synthesis of linalool-containing invasomes for terbinafine (TBF-IN) in order to increase the solubility, bioavailability, and nail permeability of terbinafine (TBF) for transungual administration. TBF-IN was created utilising the thin-film hydration technique, and with the Box-Behnken design (BBD), optimisation was carried out. TBF-INopt were investigated for vesicle size, zeta potential, PDI (Polydispersity index), entrapment efficiency (EE) and in vitro TBF release. In addition, nail permeation analysis, TEM (transmission electron microscopy), and CLSM (confocal scanning laser microscopy) were performed for further evaluation. The TBF-INopt exhibited spherical as well as sealed vesicles with a considerably small size of 146.3 nm, an EE of 74.23 per cent, a PDI of 0.1612, and an in vitro release of 85.32 per cent. The CLSM investigation revealed that the new formulation had better TBF nail penetration than the TBF suspension gel. The antifungal investigation demonstrated that the TBF-IN gel has superior antifungal activity against Trichophyton rubrum and Candida albicans compared to the commercially available terbinafine gel. In addition, an investigation of skin irritation using Wistar albino rats indicates that the TBF-IN formulation is safe for topical treatment. This study confirmed that the invasomal vesicle formulation is an effective vehicle for the transungual delivery of TBF for the treatment of onychomycosis.

Improving curcumin bactericidal potential against multi-drug resistant bacteria via its loading in polydopamine coated zinc-based metal-organic frameworks.

Multi-drug resistant (MDR) bactearial strains have posed serious health issues, thus leading to a significant increase in mortality, morbidity, and the expensive treatment of infections. Metal-organic frameworks (MOFs), comprising metal ions and a variety of organic ligands, have been employed as an effective drug deliveryy vehicle due to their low toxicity, biodegradability, higher structural integrity and diverse surface functionalities. Polydopamine (PDA) is a versatile biocompatible polymer with several interesting properties, including the ability to adhere to biological surfaces. As a result, modifying drug delivery vehicles with PDA has the potential to improve their antimicrobial properties. This work describes the preparation of PDA-coated Zn-MOFs for improving curcumin's antibacterial properties against S. aureus and E. coli. Powder X-ray diffraction (P-XRD), FT-IR, scanning electron microscopy (SEM), and DLS were utilized to characterize PDA-coated Zn-MOFs. The curcumin loading and in vitro release of the prepared MOFs were also examined. Finally, the MOFs were tested for bactericidal ability against E. coli and S. aureus using an anti-bacterial assay and surface morphological analysis. Smaller size MOFs were capable of loading and releasing curcumin. The findings showed that as curcumin was encapsulated into PDA-coated MOFs, its bactericidal potential was significantly enhanced, and the findings were further supported by SEM which indicated the complete morphological distortion of the bacteria after treatment with PDA-Cur-Zn-MOFs. These studies clearly indicate that the PDA-Cur-Zn-MOFs developed in this study are extremely promising for long-term release of drugs to treat a wide range of microbial infections.

Quality by Design-Optimized Glycerosome-Enabled Nanosunscreen Gel of Rutin Hydrate.

Sunburn is caused by prolonged exposure to ultraviolet (UV) rays from the sun, resulting in redness of the skin as well as tenderness, swelling, and blistering issues. During the healing process, it can cause peeling, irritation, and some long-term effects, including premature aging, pigmentation, and a high risk of skin cancer. Rutin has antioxidant and anti-inflammatory effects, which could potentially reduce inflammation and soothe sunburned skin. The objective of the current proposal is to develop and create carbopol gel-encased glycerosomes for the treatment of sunburn. The Design of Expert (DoE) technique was used to optimize the proposed formulation and was subjected to various characterization parameters such as nanovesicles size, polydispersity index (PDI), surface charge, entrapment efficiency (EE), and surface morphology. The optimized rutin-loaded glycerosomes (opt-RUT-loaded-GMs) were further characterised for drug release, 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay, and confocal laser scanning microscopy (CLSM). The formulation showed sustained release, greater permeation into the skin, and good antioxidant activity. The dermatokinetic study of opt-RUT-loaded-GMs confirms that the Rutin hydrate had better retention in the epidermis as compared to the dermis, owing to its potential for long lasting protection after topical application. It was observed that the prepared formulation was stable, highly safe, and had good sun protection factor (SPF) values that could be used as a suitable option for topical drug administration to maximize the therapeutic efficacy of the drugs.

Investigating the self-assembling of nicotinic hydrazide-based amphiphile into nano-range vesicles and its amphotericin B loading applications.

Most of the drugs are hydrophobic and have low water solubility, therefore posing issues in their absorption and bioavailability. Nonionic surfactants improve the solubility of hydrophobic drugs by entrapping them in their lipid bilayers. Two nonionic surfactants NODNH-16 and NODNH-18 are synthesized and characterized using different techniques i.e. EI-MS, 1H NMR, and FTIR. These newly synthesized surfactants were screened for blood hemolysis assay and cell toxicity studies using the NIH/3T3 cell line to assess their biocompatibility. Then amphotericin B was loaded into niosomal vesicles, and the drug entrapment efficiency of these surfactants was measured using UV-visible spectroscopy. The morphology of drug-loaded niosomes of synthesized surfactants was investigated using AFM, and their size, polydispersity, and zeta potential were measured with the Zetasizer instrument. Finally, a simulation study was performed to determine the pattern of self-assembly of the synthesized amphiphiles. Both synthesized nonionic surfactants showed good entrapment efficiency of 60.65 ± 2.12% and 68.45 ± 2.12%, respectively. It was also confirmed that both these synthesized nonionic surfactants were safe and biocompatible and showed less blood hemolysis (i.e. 21.13 ± 2.11% and 23.32 ± 2.45%) and higher 3T3 cells' viability at 150 µg/mL concentration as compared to Tween®-80. The antifungal potential of amphotericin B-loaded niosomes has been evaluated against unicellular multi-fungal species, which showed a promising potential for fungicidal activity. These results are substantiated by constructing a safe vehicle system for drug delivery.

Rapid Assay for the Therapeutic Drug Monitoring of Edoxaban.

Edoxaban is a direct oral anticoagulant (DOAC) that has been recently indicated for the treatment of pulmonary embolism (PE) in SARS-CoV-2 infections. Due to its pharmacokinetic variability and a narrow therapeutic index, the safe administration of the drug requires its therapeutic drug monitoring (TDM) in patients receiving the treatment. In this work, we present a label-free method for the TDM of edoxaban by surface enhanced Raman spectroscopy (SERS). The new method utilises the thiol chemistry of the drug to chemisorb its molecules onto a highly sensitive SERS substrate. This leads to the formation of efficient hotspots and a strong signal enhancement of the drug Raman bands, thus negating the need for a Raman reporter for its SERS quantification. The standard samples were run with a concentration range of 1.4 × 10-4 M to 10-12 M using a mobile phase comprising of methanol/acetonitrile (85:15 v/v) at 291 nm followed by the good linearity of R2 = 0.997. The lowest limit of quantification (LOQ) by the SERS method was experimentally determined to be 10-12 M, whereas LOQ for HPLC-UV was 4.5 × 10-7 M, respectively. The new method was used directly and in a simple HPLC-SERS assembly to detect the drug in aqueous solutions and in spiked human blood plasma down to 1 pM. Therefore, the SERS method has strong potential for the rapid screening of the drug at pathology labs and points of care.

Developing of SiO2 Nanoshells Loaded with Fluticasone Propionate for Potential Nasal Drug Delivery: Determination of Pro-Inflammatory Cytokines through mRNA Expression.

Mesoporous Silica Nanoparticles (MSN) are porous inorganic materials that have been extensively used for drug delivery due to their special qualities, such as biocompatibility, biodegradability, and non-toxicity. MSN is a promising drug delivery system to enhance the efficacy and safety of drug administration in nasal diseases like chronic rhinitis (CR). In this study, we used the sol-gel technique for MSN synthesis and incorporate fluticasone propionate (FP) for intranasal drug administration for the treatment of chronic rhinitis (CR). In order to confirm the particle size, shape, drug release, and compatibility, various instruments were used. MSN was effectively prepared with average sizes ranging between 400 ± 34 nm (mean ± SD) as measured by dynamic light scattering (DLS), while zeta potential verified in all cases their positive charged surface. To investigate MSN features, the Fourier transform infrared spectrometer (FTIR), scanning electron microscopy (SEM), transmission electron microscope (TEM), thermal analysis, X-ray diffraction (XRD), and nitrogen adsorption/desorption measurement were used. The loaded compound was submitted to in vitro dissolution tests, and a remarkable dissolution rate improvement was observed compared to the crystalline drug in both pH conditions (1.2 and 7.4 pH). By using an MTT assay cell viability was assessed. The expression levels of the anti-inflammatory cytokines IL-4 and IL-5 were also measured using mRNA extraction from rat blood. Other characterizations like acute toxicity and hemolytic activity were also performed to confirm loaded MSN safety. Loaded MSN was incorporated in nasal spray prepared by using innovator excipients including poloxamer. After this, its nasal spray's physical characteristics were also determined and compared with a commercial product (Ticovate).

Stability of Inhaled Ciprofloxacin-Loaded Poly(2-ethyl-2-oxazoline) Nanoparticle Dry Powder Inhaler Formulation in High Stressed Conditions.

In this study, the stability of ciprofloxacin (CIP)-loaded poly(2-ethyl-2-oxazoline) (PEtOx) nanoparticles (NPs) was investigated at normal and high stressed conditions. The blank NPs were used to understand the intrinsic physicochemical properties of the polymer NPs under these storage conditions. The formulated NPs were prepared by a coassembly reaction and dried by lyophilization. The powder NPs were stored at controlled room temperature (25 °C) with normal relative humidity (RH) (43%) and high temperature (40 °C) and RH (75%). The stored samples were analyzed by determining the particle sizes, morphology, solid-state properties, thermal behavior, drug-polymer interactions, and aerosol performances over six months. The chemical stability of the formulations was determined by X-ray diffraction, attenuated total refection-Fourier transform infrared (ATR-FTIR), and high-performance liquid chromatography (HPLC) over six months under both conditions. The particle size of the blank PEtOx NPs significantly (p < 0.05) increased from 195.4 nm to 202.7 nm after 3 months at 40 °C/75% RH due to the moisture absorption from high RH; however, no significant increase was observed afterward. On the other hand, the sizes of CIP-loaded PEtOx NPs significantly (p < 0.05) reduced from 200.2 nm to 126.3 nm after 6 months at 40 °C/75% RH. In addition, the scanning electron microscopy (SEM) images revealed that the surfaces of CIP-loaded PEtOx NPs become smoother after 3 months of storage due to the decay of surface drugs compared to the freshly prepared NPs. However, transmission electron microscopy (TEM) images could not provide much information on drug decay from the nanoparticle's surfaces. The fine particle fraction (FPF) of CIP-loaded PEtOx NPs dropped significantly (p < 0.05) after three months at 25 °C/43% RH and 40 °C/75% RH conditions. The reduced FPF of CIP-loaded PEtOx NPs occurred due to the drug decay from the polymeric surface and blank PEtOx NPs due to the aggregations of the NPs at high temperatures and RH. Although the aerosolization properties of the prepared CIP-loaded PEtOx NPs were reduced, all formulations were chemically stable in the experimental conditions.

Formulation, Optimization and Evaluation of Cytarabine-Loaded Iron Oxide Nanoparticles: From In Vitro to In Vivo Evaluation of Anticancer Activity.

Innovative drug delivery systems based on iron oxide nanoparticles (INPs) has generated a lot of interest worldwide and have prime biomedical benefits in anticancer therapy. There are still issues reported regarding the stability, absorption, and toxicity of iron oxide nanoparticles (INPs) when administered due to its rapid surface oxidation and agglomeration with blood proteins. To solve this problem, we have synthesized trehalose-coated stabilized iron oxide nanoparticles (TINPs) by a co-precipitation technique. The surface coating of INPs with trehalose helps to improve the stability, prevents protein binding, and increase absorption uptake inside the body. Developed TINPs was then loaded with anticancer drug cytarabine by chemical crosslinking encapsulation method using suitable solvent. Engineered cytarabine-loaded trehalose-coated stabilized iron oxide nanoparticles (CY-TINPs) were optimized for particle size, zeta potential (-13.03 mV), and solid-state characterization such as differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and transmission electron microscope (TEM) studies. The particle size of 50 nm was achieved for developed CY-TINPs. The developed CY-TINPs was further evaluated for in vitro cell line investigations which confirmed potential cytotoxic activity. Developed CY-TINPs show remarkable enhancement in in vivo pharmacokinetic parameters Cmax as 425.26 ± 2.11 and AUC0-72 as 11,546.64 ± 139.82 as compared to pure drug. Compared to traditional drug delivery, the CY-TINPs formulation can effectively delay release, improve bioavailability, and boost cytotoxic activity against tumors.

Identification of New Drug Target in Staphylococcus lugdunensis by Subtractive Genomics Analysis and Their Inhibitors through Molecular Docking and Molecular Dynamic Simulation Studies.

Staphylococcus lugdunensis is a coagulase-negative, Gram-positive, and human pathogenic bacteria. S. lugdunensis is the causative agent of diseases, such as native and prosthetic valve endocarditis, meningitis, septic arthritis, skin abscesses, brain abscess, breast abscesses, spondylodiscitis, post-surgical wound infections, bacteremia, and peritonitis. S. lugdunensis displays resistance to beta-lactam antibiotics due to the production of beta-lactamases. This study aimed to identify potential novel essential, human non-homologous, and non-gut flora drug targets in the S. lugdunensis strain N920143, and to evaluate the potential inhibitors of drug targets. The method was concerned with a homology search between the host and the pathogen proteome. Various tools, including the DEG (database of essential genes) for the essentiality of proteins, the KEGG for pathways analysis, CELLO V.2.5 for cellular localization prediction, and the drug bank database for predicting the druggability potential of proteins, were used. Furthermore, a similarity search with gut flora proteins was performed. A DNA-binding response-regulator protein was identified as a novel drug target against the N920143 strain of S. lugdunensis. The three-dimensional structure of the drug target was modelled and validated with the help of online tools. Furthermore, ten thousand drug-like compounds were retrieved from the ZINC15 database. The molecular docking approach for the DNA-binding response-regulator protein identified ZINC000020192004 and ZINC000020530348 as the most favorable compounds to interact with the active site residues of the drug target. These two compounds were subjected to an MD simulation study. Our analysis revealed that the identified compounds revealed more stable behavior when bound to the drug target DNA-binding response-regulator protein than the apostate.

Phytosterol-Loaded Surface-Tailored Bioactive-Polymer Nanoparticles for Cancer Treatment: Optimization, In Vitro Cell Viability, Antioxidant Activity, and Stability Studies.

This study aimsto optimize, characterize, and assess the phytosterol-loaded surface-tailored bioactive Alginate/Chitosan NPs for antitumor efficacy against breast cancer. ß-Sitosterol-loaded Alginate/Chitosan nanoparticles (ß-SIT-Alg/Ch-NPs) were fabricated using an ion-gelation technique, and then the NPs' surfaces were activated using an EDC/sulfo-NHS conjugation reaction. The activated chitosan NPs werefunctionalized with folic acid (FA), leveled as ß-SIT-Alg/Ch-NPs-FA. Moreover, the functionalized NPs were characterized for size distribution, polydispersity index (PDI), and surface charge, FT-IR and DSC. ß-SIT released from ß-SIT-Alg/Ch-NPs was estimated in various biorelevant media of pH 7.4, 6.5, and 5.5, and data werefitted into various kinetic models. The cytotoxic study of ß-SIT-Alg/Ch-NPs-FA against the cancer cell line was established. The antioxidant study of developed ß-SIT-Alg/Ch-NPs was performed using DPPH assay. The stability of developed optimized formulation was assessed in phosphate buffer saline (PBS, pH 7.4), as per ICH guidelines. The drug-entrapped Alg/Ch-NPs-FA appeared uniform and nonaggregated, and the nanoscale particle measured a mean size of 126 ± 8.70 nm. The %drug encapsulation efficiency and %drug loading in ß-SIT-Alg/Ch-NPs-FA were 91.06 ± 2.6% and 6.0 ± 0.52%, respectively. The surface charge on ß-SIT-Alg/Ch-NPs-FA was measured as +25 mV. The maximum ß-SIT release from ß-SIT-Alg/Ch-NPs-FA was 71.50 ± 6.5% in pH 5.5. The cytotoxic assay expressed an extremely significant antitumor effect by ß-SIT-Alg/Ch-NPs-FA when compared to ß-SIT-suspension (p < 0.001). The antioxidant capacity of ß-SIT-Alg/Ch-NPs-FA was 91 ± 5.99% compared to 29 ± 8.02% for ß-SIT-suspension. The stability of NPs noticed an unworthy alteration (p > 0.05) in particle sizes and other parameters under study in the specific period.

Development and Evaluation of Ginkgo biloba/Sodium Alginate Nanocomplex Gel as a Long-Acting Formulation for Wound Healing.

The aim of the study was to develop and evaluate the Ginkgo biloba nanocomplex gel (GKNG) as a long-acting formulation for the wound healing potential. Pharmaceutical analysis showed an average particle size of 450.14 ± 36.06 nm for GKNG, zeta potential +0.012 ± 0.003 mV, and encapsulation efficiency 91 ± 1.8%. The rheological analysis also showed the optimum diffusion rate and viscosity needed for topical drug delivery. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analysis further confirmed the success of GKNG. The in vivo study showed increments in the antioxidant enzymes superoxide dismutase (SOD) and glutathione peroxidase (GPx) and a lower level of lipid peroxidation (MDA) after GKNG treatment. The GKNG group showed upregulations in collagen type I, as alpha 1 collagen (COL1A1), and collagen type IV, as alpha 1 collagen (COL4A1). Furthermore, the in vivo study showed increments in hydroxyproline, epidermal growth factor (EGF), vascular endothelial growth factor (VEGF), and transforming growth factor-beta 1 (TGF-ß1) after the GKNG. Additionally, GKNG effectively increased the wound contraction compared to GK gel and sodium alginate (SA) gel. Based on the in vitro and in vivo evaluation, GKNG effectively accelerated wound healing by modulation of antioxidant enzymes, collagens, angiogenic factors, and TGF-ß1.

A Validated, Rapid and Cost-Efficient HPTLC Method for Quantification of Gamma-Linolenic Acid in Borage Oil and Evaluation of Antioxidant Activity.

Borage oil that is extracted from (Borago officinalis Linn.) is a well-known medicinal plant having various medicinal benefits. In this work, an affordable, simple, reliable, rapid and easily accessible high-performance thin-layer chromatography (HPTLC) method was developed for the estimation of gamma-linolenic acid (GLA) in borage oil. HPTLC method employs thin-layer chromatography (TLC) aluminum plates precoated with silica gel (G60F254) as the stationary phase, and the mixture of hexane:toulene:glacial acetic acid (3:7:1, v/v/v) was used as the mobile phase. Densitometric analysis of the TLC plates was carried out at 200 nm. The developed method showed well-resolved spots with retention factor (Rf) value of 0.53 ± 0.04 for GLA. Various experimental conditions like saturation time for chamber, solvent phase migration and width of the band were studied intensely for selecting the optimum conditions. The method validation was performed for parameters like linearity, accuracy, specificity and precision. The values of limit of detection and limit of quantification for GLA were found to be 0.221 and 0.737 µg/band, respectively. In nutshell, the developed HPTLC method was found to be highly sensitive for the estimation of GLA in the herbal oil samples and formulations.