Interplay Between Hydrogen Bonding and Electron Transfer in Mixed Valence Assemblies of Triarylamine Trisamides.

Hydrogen-bonding interactions are assumed to play a critical role in the long-range transport of light or charge recently observed in supramolecular assemblies of C3 -symmetrical discotic molecules. Herein, the structure of mixed valence assemblies formed by irradiating triarylamine trisamide (TATA) molecules was determined by multifarious techniques under various conditions with the aim of probing the interplay between the hydrogen bonding network and the rate of electron transport in different states (solution, gel, film). Irradiation was performed under initial states that vary by the degree of association of TATA monomers through hydrogen bonds. Firstly, a significant shift of the N-H and C=O stretching frequencies was observed by FTIR upon irradiation thus revealing an overlooked signature of TATA⋅+ species and interacting mixed valence aggregates. Secondly, gels and films both mostly consist of hydrogen-bonded TATA polymers but their EPR spectra recorded at 293 K reveal very different behaviors: localized electrons in the gels versus fully delocalized electrons in the films. Hydrogen bonding thus appears as a necessary but not sufficient condition to get fast electron transfer rates and a packing of the TATA monomers particularly suitable for charge transport is assumed to exist in the solid state. Finally, defects in the hydrogen bonding network are detected upon increasing the number of radical species in the mixed valence assemblies present in the film state without impeding the delocalization of the unpaired electrons. A delicate balance between hydrogen bonds and packing is thus necessary to get supramolecular polarons in mixed valence TATA assemblies.

Rationalizing the Extent of the "Sergeants-and-Soldiers" Effect in Supramolecular Helical Catalysts: Effect of Copper Coordination.

Aggregation of supramolecular helices, for example through interdigitation of their alkyl side chains or through more directional supramolecular interactions, leads to hierarchical architectures with original structural and chiroptical properties. However, when a chiral monomer (the "sergeant") is introduced as a minor component in these assemblies composed of a majority of achiral monomers (the "soldiers"), it is not clear how the aggregation changes the ability of the sergeant to induce a preferential helicity to the polymer main chain (the so-called "sergeants-and-soldiers" effect). This study reports a detailed investigation of the influence of [Cu(OAc)2 ⋅H2 O] coordination on the structure and chiroptical properties of helical hydrogen-bonded co-assemblies composed of a catalytically-active benzene-1,3,5-tricarboxamide (BTA) monomer, acting as the "soldier", and an enantiopure BTA monomer derived from cyclohexylalanine, playing the role of the "sergeant". The copper actually significantly influences the extent of the "sergeants-and-soldiers" effect since it acts as a crosslink that induces some chiral defects in the supramolecular helices. These crosslinks appear to be preserved during the catalytic hydrosilylation of 4-nitroacetophenone. The aggregation of helices through the formation of copper crosslinks is reversible since homochiral single helices are exclusively formed in the case of sergeant-rich assemblies. The fact that both main chain and side chain aggregation affects the chiroptical properties of supramolecular helices must be considered in the design of elaborated chiral materials.

Possible chemical and physical scenarios towards biological homochirality.

The single chirality of biological molecules in terrestrial biology raises more questions than certitudes about its origin. The emergence of biological homochirality (BH) and its connection with the appearance of life have elicited a large number of theories related to the generation, amplification and preservation of a chiral bias in molecules of life under prebiotically relevant conditions. However, a global scenario is still lacking. Here, the possibility of inducing a significant chiral bias "from scratch", i.e. in the absence of pre-existing enantiomerically-enriched chemical species, will be considered first. It includes phenomena that are inherent to the nature of matter itself, such as the infinitesimal energy difference between enantiomers as a result of violation of parity in certain fundamental interactions, and physicochemical processes related to interactions between chiral organic molecules and physical fields, polarized particles, polarized spins and chiral surfaces. The spontaneous emergence of chirality in the absence of detectable chiral physical and chemical sources has recently undergone significant advances thanks to the deracemization of conglomerates through Viedma ripening and asymmetric auto-catalysis with the Soai reaction. All these phenomena are commonly discussed as plausible sources of asymmetry under prebiotic conditions and are potentially accountable for the primeval chiral bias in molecules of life. Then, several scenarios will be discussed that are aimed to reflect the different debates about the emergence of BH: extra-terrestrial or terrestrial origin (where?), nature of the mechanisms leading to the propagation and enhancement of the primeval chiral bias (how?) and temporal sequence between chemical homochirality, BH and life emergence (when?). Intense and ongoing theories regarding the emergence of optically pure molecules at different moments of the evolution process towards life, i.e. at the levels of building blocks of Life, of the instructed or functional polymers, or even later at the stage of more elaborated chemical systems, will be critically discussed. The underlying principles and the experimental evidence will be commented for each scenario with particular attention on those leading to the induction and enhancement of enantiomeric excesses in proteinogenic amino acids, natural sugars, and their intermediates or derivatives. The aim of this review is to propose an updated and timely synopsis in order to stimulate new efforts in this interdisciplinary field.

Energetics of Competing Chiral Supramolecular Polymers.

Chirality can have unexpected consequences including on properties other than spectroscopic. We show herein that a racemic mixture of bis-urea stereoisomers forms thermodynamically stable supramolecular polymers that result in a more viscous solution than for the pure stereoisomer. The origin of this macroscopic property was probed by characterizing the structure and stability of the assemblies. Both racemic and non-racemic bis-urea stereoisomers form two competing helical supramolecular polymers in solution: a double and a single helical structure at low and high temperature, respectively. The transition temperature between these assemblies, as probed by spectroscopic and calorimetric analyses, is strongly influenced by the composition (by up to 70 °C). A simple model that accounts for the thermodynamics of this system, indicates that the stereochemical defects (chiral mismatches and helix reversals) affect much more the stability of single helices. Therefore, the heterochiral double helical structure predominates over the single helical structure (whilst the opposite holds for the homochiral structures), which explains the aforementioned higher viscosity of the racemic bis-urea solution. This rationale constitutes a new basis to tune the macroscopic properties of the increasing number of supramolecular polymers reported to exhibit competing chiral nanostructures.

Tuning the Organogelating and Spectroscopic Properties of a C3 -Symmetric Pyrene-Based Gelator through Charge Transfer.

Two-component organogels and xerogels based on a C3 -symmetric pyrene-containing gelator have been deeply characterized through a wide range of techniques. Based on the formation of charge transfer complexes, the gelation phenomenon proved to be highly dependent on the nature of the electron poor dopant. This parameter significantly influenced the corresponding gelation domains, the critical gelation concentrations of acceptor dopants, the gel-to-sol transition temperatures, the microstructures formed in the xerogel state and their spectroscopic properties. In particular, titrations and variable-temperature UV-visible absorption spectroscopy demonstrated the key role of donor-acceptor interactions with a remarkable correlation between the phase transition temperatures and the disappearance of the characteristic charge transfer bands. The assignment of these electronic transitions was confirmed through time-dependent density functional theory (TD-DFT) calculations. Eventually, it was shown that the luminescent properties of these materials can be tuned with the temperature, either in intensity or emission wavelength.

Dissecting the Role of the Sergeants in Supramolecular Helical Catalysts: From Chain Capping to Intercalation.

Controlling the properties of supramolecular assemblies requires unveiling the specific interactions between their components. In the present work, the catalytic properties and structure of co-assemblies composed of a benzene-1,3,5-tricarboxamide (BTA) ligand coordinated to copper (the soldier) and seven enantiopure BTAs (the sergeants) have been determined. Whatever the sergeant, the enantioselectivity of the reaction is directly proportional to the optical purity of the supramolecular helices. More strikingly, the role played by the sergeant in the co-assembly process differs significantly: from almost pure intercalator (when it is incorporated in the stacks of the soldier and generates long homochiral helices) to pure chain capper (when it leads to the formation of partly helically biased and short assemblies). The former situation leads to optimal enantioselectivity for the catalytic system under study (58 % ee) while the latter situation leads to very low selectivity (8 % ee). The successful rationalization of this high and unexpected difference is crucial for the development of more efficient catalysts and more elaborate supramolecular systems.

Emergence of Homochiral Benzene-1,3,5-tricarboxamide Helical Assemblies and Catalysts upon Addition of an Achiral Monomer.

Chirality amplification refers to the ability of a small chiral bias to fully control the main chain helicity of polymers and assemblies. Further implementation of functional chirally amplified helices as switchable asymmetric catalysts, chiral sensors, and circularly polarized light emitters will require a greater control of the energetics governing these chirality amplification effects. In this work, we report on the counterintuitive ability of an achiral molecule to suppress conformational defects in supramolecular helices, thus leading to the emergence of homochirality in a system containing a very small chiral bias. We focus our investigation on supramolecular helices composed of an achiral benzene-1,3,5-tricarboxamide (BTA) ligand, coordinated to copper, and an enantiopure BTA comonomer. Amplification of chirality as probed by varying the amount (sergeants and soldiers effect) or the optical purity (diluted majority-rules effect) of the enantiopure comonomer are modest in this initial system. However, both effects are hugely enhanced upon addition of a second achiral BTA monomer, leading to a perfect control of the helicity either by means of a remarkably low amount of sergeants (0.5%) or a small bias from a racemic mixture of enantiopure comonomers (10% ee). Such an enhancement in the amplification of chirality is only achieved by mixing the three components, i.e. the two achiral and the enantiopure comonomers, highlighting a synergistic effect upon coassembly of the three monomers. Investigation of the role of the achiral additive by multifarious analytical techniques supports its ability to stabilize the helical coassemblies and suppress helix reversals: i.e., conformational defects. Implementation of these helical copper precatalysts in the hydrosilylation of 1-(4-nitrophenyl)ethanone confirms that the effect of the achiral BTA additive is also operative under the conditions of the catalytic experiment. A highly enantioenriched product (90% ee) is produced by a supramolecular catalyst operating with ppm levels of chiral species.

N-Substituted Benzene-1-Urea-3,5-Biscarboxamide (BUBA): Easily Accessible C2 -Symmetric Monomers for the Construction of Reversible and Chirally Amplified Helical Assemblies.

Non-C3 -symmetric supramolecular helices are gaining interest for the design of hierarchical assemblies, for the compartmentalisation or the self-assembly of polymer chains and for application in asymmetric catalysis. Herein, N-substituted benzene-1-urea-3,5-biscarboxamide (BUBA) monomers, which consist of one urea and two carbon-connected amide functions linked to an aromatic ring, are introduced as an easily accessible class of C2 -symmetric supramolecular synthons. In apolar solvents, BUBA monomers assemble into long helical assemblies by means of hydrogen-bonding and aromatic interactions, as assessed by several analytical techniques. To probe the influence of the urea function, BUBA and related benzene-1,3,5-tricarboxamide (BTA) helical polymers have been compared, in terms of their thermodynamics of formation, stability, reversibility and chiral amplification properties. Similar to BTA, BUBA monomers form long helices reversibly through a highly cooperative mechanism and the helicity of their assemblies is governed by chiral amplification effects. However, precise quantification of their properties reveals that BUBA monomers assemble in a more cooperative manner. Also, chiral amplification operates to a higher extent in BUBA helices, as probed by both sergeants-and-soldiers and majority-rules experiments. Compatibility between urea and amide functions also allows the formation of co-assemblies that incorporate both BUBA and BTA monomers. Importantly, a small amount of chiral BUBA monomers in these co-assemblies is sufficient to obtain single-handed helices; thus paving the way towards the development of functional supramolecular helices.

Organogel Formation Rationalized by Hansen Solubility Parameters: Shift of the Gelation Sphere with the Gelator Structure.

To rationalize how the gelation ability of a low molecular weight gelator is influenced by its molecular structure, we performed extensive solubility tests of a group of thiazole-based gelators and made use of Hansen solubility parameter formalism. We observe that the increase of a linear alkyl chain in these gelators promotes an increase of the radius of the gelation sphere as well as a gradual shift of its center to lower values of the polar (δP) and hydrogen bonding (δH) components. The molecular packing within the fibers and the crystal habit were determined by a combination of X-ray diffraction and molecular modeling. We attribute the gradual and linear shift of the gelation sphere to the fact that all of the studied gelators share the same molecular packing, so that an increasing length of the alkyl chain reduces the proportion of polar groups at the surface, resulting in a gradual increase in the contact between apolar parts of the fiber and the solvent.

A Competing Hydrogen Bonding Pattern to Yield a Thermo-Thickening Supramolecular Polymer.

Introduction of competing interactions in the design of a supramolecular polymer (SP) creates pathway complexity. Ester-bis-ureas contain both a strong bis-urea sticker that is responsible for the build-up of long rod-like objects by hydrogen bonding and ester groups that can interfere with this main pattern in a subtle way. Spectroscopic (FTIR and CD), calorimetric (DSC), and scattering (SANS) techniques show that such ester-bis-ureas self-assemble into three competing rod-like SPs. The previously unreported low-temperature SP is stabilized by hydrogen bonds between the interfering ester groups and the urea moieties. It also features a weak macroscopic alignment of the rods. The other structures form isotropic dispersions of rods stabilized by the more classical urea-urea hydrogen bonding pattern. The transition from the low-temperature structure to the next occurs reversibly by heating and is accompanied by an increase in viscosity, a rare feature for solutions in hydrocarbons.

Organogel formation rationalized by Hansen solubility parameters: improved methodology.

An organogel is obtained when a low molar mass compound forms a network of anisotropic fibres in a liquid that is therefore transformed into a macroscopic solid. Various approaches have been proposed to correlate organogel formation and Hansen solubility parameters. These approaches are well adapted to specific experimental datasets but lack universality. A general method to determine the gelation domain from the solubility data of low molecular weight gelators is here reported.

Real-Time Control of the Enantioselectivity of a Supramolecular Catalyst Allows Selecting the Configuration of Consecutively Formed Stereogenic Centers.

The enantiomeric state of a supramolecular copper catalyst can be switched in situ in ca. five seconds. The dynamic property of the catalyst is provided by the non-covalent nature of the helical assemblies supporting the copper centers. These assemblies are formed by mixing an achiral benzene-1,3,5-tricarboxamide (BTA) phosphine ligand (for copper coordination) and both enantiomers of a chiral phosphine-free BTA co-monomer (for chirality amplification). The enantioselectivity of the hydrosilylation reaction is fixed by the BTA enantiomer in excess, which can be altered by simple BTA addition. As a result of the complete and fast stereochemical switch, any combination of the enantiomers was obtained during the conversion of a mixture of two substrates.

Correlation between the Selectivity and the Structure of an Asymmetric Catalyst Built on a Chirally Amplified Supramolecular Helical Scaffold.

For the first time, supramolecular helical rods composed of an achiral metal complex and a complementary enantiopure monomer provided a good level of enantioinduction in asymmetric catalysis. Mixtures containing an achiral ligand monomer (BTA(PPh2), 2 mol %) and an enantiopure ligand-free comonomer (ester BTA, 2.5 mol %), both possessing a complementary benzene-1,3,5-tricarboxamide (BTA) central unit, were investigated in combination with [Rh(cod)2]BArF (1 mol %) in the asymmetric hydrogenation of dimethyl itaconate. Notably, efficient chirality transfer occurs within the hydrogen-bonded coassemblies formed by BTA Ile and the intrinsically achiral catalytic rhodium catalyst, providing the hydrogenation product with up to 85% ee. The effect of the relative content of BTA Ile as compared to the ligand was investigated. The amount of chiral comonomer can be decreased down to one-fourth of that of the ligand without deteriorating the enantioselectivity of the reaction, while the enantioselectivity decreases for mixtures containing high amounts of BTA Ile. The nonlinear relationship between the amount of chiral comonomer and the enantioselectivity indicates that chirality amplification effects are at work in this catalytic system. Also, right-handed helical rods are formed upon co-assembly of the achiral rhodium complex of BTA(PPh2) and the enantiopure comonomer BTA Ile as confirmed by various spectroscopic and scattering techniques. Remarkably, the major enantiomer and the selectivity of the catalytic reaction are related to the handedness and the net helicity of the coassemblies, respectively. Further development of this class of catalysts built on chirally amplified helical scaffolds should contribute to the design of asymmetric catalysts operating with low amounts of chiral entities.

Induced Circular Dichroism in Phosphine Gold(I) Aryl Acetylide Urea Complexes through Hydrogen-Bonded Chiral Co-Assemblies.

Phosphine gold(I) aryl acetylide complexes equipped with a central bis(urea) moiety form 1D hydrogen-bonded polymeric assemblies in solution that do not display any optical activity. Chiral co-assemblies are formed by simple addition of an enantiopure (metal-free) complementary monomer. Although exhibiting an intrinsically achiral linear geometry, the gold(I) aryl acetylide fragment is located in the chiral environment displayed by the hydrogen-bonded co-assemblies, as demonstrated by induced circular dichroism (ICD).

Tuning the nature and stability of self-assemblies formed by ester benzene 1,3,5-tricarboxamides: the crucial role played by the substituents.

As the benzene 1,3,5-tricarboxamide (BTA) moiety is commonly used as the central assembling unit for the construction of functionalized supramolecular architectures, strategies to tailor the nature and stability of BTA assemblies are needed. The assembly properties of a library of structurally simple BTAs derived from amino dodecyl esters (ester BTAs, 13 members) have been studied, either in the bulk or in cyclohexane solutions, by means of a series of analytical methods (NMR, DSC, POM, FT-IR, UV-Vis, CD, ITC, high-sensitivity DSC, SANS). Two types of hydrogen-bonded species have been identified and characterized: the expected amide-bonded helical rods (or stacks) that are structurally similar to those formed by BTAs with simple alkyl side chains (alkyl BTAs), and ester-bonded dimers in which the BTAs are connected by means of hydrogen bonds linking the amide N-H and the ester C[double bond, length as m-dash]O. MM/MD calculations coupled with simulations of CD spectra allow for the precise determination of the molecular arrangement and of the hydrogen bond pattern of these dimers. Our study points out the crucial influence of the substituent attached on the amino-ester α-carbon on the relative stability of the rod-like versus dimeric assemblies. By varying this substituent, one can precisely tune the nature of the dominant hydrogen-bonded species (stacks or dimers) in the neat compounds and in cyclohexane over a wide range of temperatures and concentrations. In the neat BTAs, stacks are stable up to 213 °C and dimers above 180 °C whilst in cyclohexane stacks form at c* > 3 × 10-5 M at 20 °C and dimers are stable up to 80 °C at 7 × 10-6 M. Ester BTAs that assemble into stacks form a liquid-crystalline phase and yield gels or viscous solutions in cyclohexane, demonstrating the importance of controlling the structure of these assemblies. Our systematic study of these structurally similar ester BTAs also allows for a better understanding of how a single atom or moiety can impact the nature and stability of BTA aggregates, which is of importance for the future development of functionalized BTA supramolecular polymers.

Structural Control of Bisurea-Based Supramolecular Polymers: Influence of an Ester Moiety.

A few examples of monomers are known that self-assemble into various high molar mass structures in solution. Controlling the morphology of the resulting supramolecular polymers is a highly desirable goal for many applications. Herein, we compare the self-assembling properties of newly prepared ester bisurea monomers with those of previously investigated alkyl bisurea monomers. The ester functionality decreases the hydrogen bonding strength of the bisurea monomers but does not prevent the formation of long assemblies in nonpolar solvents: gels are formed at millimolar concentration. Surprisingly, ester bisureas self-assemble at room temperature into rod-like urea-bonded supramolecular polymers that are different from the ones formed by alkyl bisureas. The rods formed by ester bisurea supramolecular polymers are compact (instead of tubular in the case of alkyl bisureas) and display two monomers in the cross-section (instead of three in the case of alkyl bisureas). The stability of the structures formed by ester bisureas can be easily tuned by changing the nature of the substituent in the α-position of the urea functions and/or the nature of the alkyl side chains.

Organogel formation rationalized by Hansen solubility parameters: influence of gelator structure.

Some organic compounds form gels in liquids by forming a network of anisotropic fibres. Based on extensive solubility tests of four gelators of similar structures, and on Hansen solubility parameter formalism, we have probed the quantitative effect of a structural variation of the gelator structure on its gel formation ability. Increasing the length of an alkyl group of the gelator obviously reduces its polarity, which leads to a gradual shift of its solubility sphere towards lower δp and δh values. At the same time, its gelation sphere is shifted - to a much stronger extent - towards larger δp and δh values.

Supramolecular catalysis. Part 2: artificial enzyme mimics.

The design of artificial catalysts able to compete with the catalytic proficiency of enzymes is an intense subject of research. Non-covalent interactions are thought to be involved in several properties of enzymatic catalysis, notably (i) the confinement of the substrates and the active site within a catalytic pocket, (ii) the creation of a hydrophobic pocket in water, (iii) self-replication properties and (iv) allosteric properties. The origins of the enhanced rates and high catalytic selectivities associated with these properties are still a matter of debate. Stabilisation of the transition state and favourable conformations of the active site and the product(s) are probably part of the answer. We present here artificial catalysts and biomacromolecule hybrid catalysts which constitute good models towards the development of truly competitive artificial enzymes.

Supramolecular catalysis. Part 1: non-covalent interactions as a tool for building and modifying homogeneous catalysts.

Supramolecular catalysis is a rapidly expanding discipline which has benefited from the development of both homogeneous catalysis and supramolecular chemistry. The properties of classical metal and organic catalysts can now be carefully tailored by means of several suitable approaches and the choice of reversible interactions such as hydrogen bond, metal-ligand, electrostatic and hydrophobic interactions. The first part of these two subsequent reviews will be dedicated to catalytic systems for which non-covalent interactions between the partners of the reaction have been designed although mimicking enzyme properties has not been intended. Ligand, metal, organocatalyst, substrate, additive, and metal counterion are reaction partners that can be held together by non-covalent interactions. The resulting catalysts possess unique properties compared to analogues lacking the assembling properties. Depending on the nature of the reaction partners involved in the interactions, distinct applications have been accomplished, mainly (i) the building of bidentate ligand libraries (intra ligand-ligand), (ii) the building of di- or oligonuclear complexes (inter ligand-ligand), (iii) the alteration of the coordination spheres of a metal catalyst (ligand-ligand additive), and (iv) the control of the substrate reactivity (catalyst-substrate). More complex systems that involve the cooperative action of three reaction partners have also been disclosed. In this review, special attention will be given to supramolecular catalysts for which the observed catalytic activity and/or selectivity have been imputed to non-covalent interaction between the reaction partners. Additional features of these catalysts are the easy modulation of the catalytic performance by modifying one of their building blocks and the development of new catalytic pathways/reactions not achievable with classical covalent catalysts.

Organogel formation rationalized by Hansen solubility parameters: dos and don'ts.

Some organic compounds gelate liquids by forming a network of anisotropic fibres. Hansen solubility parameters can be used to predict the range of liquids that are likely to be gelled by any given gelator. We critically review the various approaches recently proposed in the literature. In particular, we discuss the shape of the gelation domain, the relevance of the Teas plot representation and the use of group contribution calculations. We also propose an improved scheme for the solubility tests, and a detailed procedure for the determination of the gelation domain.