Evaluation of BMP2/miRNA co-expression systems for potent therapeutic efficacy in bone-tissue regeneration.

Reconstruction of bone defects and compensation of deficient repair mechanisms represent important goals within the field of regenerative medicine and require novel safe strategies for translation into the clinic. A non-viral osteogenic gene therapeutic vector system ('hybrid vectors') was generated, combining an improved bone morphogenetic protein 2 (BMP2) gene cassette and single pro-osteogenic microRNAs (miR-148b-3p, miR-20-5p, miR-590b-5p), driven by the U6 promoter. The vectors were tested in vitro for their osteogenic differentiation potential in C2C12 and C3H/10T1/2 cell lines, using BMP2 alone as control. After confirming BMP2 expression and miRNA transcription, increased osteogenic differentiation was observed by all hybrid vectors, but most consistently by BMP2/miR-590-5p, using alkaline phosphatase enzyme activity assays and osteogenic marker mRNA quantitation, including runt-related transcription factor 2 (Runx2), collagen type 1 (Col1a1) and osteocalcin. To visualise target mRNAs of the respective miRNAs, next generation sequencing was performed, confirming down-regulation of mRNA targets of the hybrid vectors. Since the hybrid vector consisting of BMP2 and miR-590-5p showed the largest increase in osteogenic differentiation in vitro, this was tested in a mouse ectopic-bone model. Mineralisation was more than with BMP2 alone. The present study showed hybrid vectors as a novel non-viral gene therapeutic plasmid system for combining therapeutic effects of recombinant protein expression and miRNA transcription that did not add to the burden of the translation machinery, while improving the therapeutic efficacies. In vivo proof-of-principle in the context of bone regeneration suggested that such hybrid vectors will be applicable in a wide array of gene therapeutic strategies.

Adipose-tissue-derived therapeutic cells in their natural environment as an autologous cell therapy strategy: the microtissue-stromal vascular fraction.

The prerequisite for a successful clinical use of autologous adipose-tissue-derived cells is the highest possible regenerative potential of the applied cell population, the stromal vascular fraction (SVF). Current isolation methods depend on high enzyme concentration, lysis buffer, long incubation steps and mechanical stress, resulting in single cell dissociation. The aim of the study was to limit cell manipulation and obtain a derivative comprising therapeutic cells (microtissue-SVF) without dissociation from their natural extracellular matrix, by employing a gentle good manufacturing practice (GMP)-grade isolation. The microtissue-SVF yielded larger numbers of viable cells as compared to the improved standard-SVF, both with low enzyme concentration and minimal dead cell content. It comprised stromal tissue compounds (collagen, glycosaminoglycans, fibroblasts), capillaries and vessel structures (CD31+, smooth muscle actin+). A broad range of cell types was identified by surface-marker characterisation, including mesenchymal, haematopoietic, pericytic, blood and lymphatic vascular and epithelial cells. Subpopulations such as supra-adventitial adipose-derived stromal/stem cells and endothelial progenitor cells were significantly more abundant in the microtissue-SVF, corroborated by significantly higher potency for angiogenic tube-like structure formation in vitro. The microtissue-SVF showed the characteristic phenotype and tri-lineage mesenchymal differentiation potential in vitro and an immunomodulatory and pro-angiogenic secretome. In vivo implantation of the microtissue-SVF combined with fat demonstrated successful graft integration in nude mice. The present study demonstrated a fast and gentle isolation by minor manipulation of liposuction material, achieving a therapeutically relevant cell population with high vascularisation potential and immunomodulatory properties still embedded in a fraction of its original matrix.

Liquid antiadhesive agents for intraperitoneal hernia repair procedures: Artiss® compared to CoSeal® and Adept® in an IPOM rat model.

BACKGROUND: Adhesion formation remains an important issue in hernia surgery. Liquid agents were developed for easy and versatile application, especially in laparoscopy. The aim of this study was to compare the antiadhesive effect of fibrin sealant (FS, Artiss®), Icodextrin (ID, Adept®) and Polyethylene glycol (PEG, CoSeal®) alone and in combination and to evaluate the resulting effect on tissue integration of the mesh. METHODS: A total of 56 Sprague-Dawley rats were operated in open IPOM technique. A middleweight polypropylene mesh of 2 × 2 cm size was implanted and covered with 1: FS, 2: ID, 3: PEG, 4: FS + ID, 5: FS + PEG, 6: PEG + ID, 7: control group, uncovered mesh (n = 8 per treatment/control). Observation period was 30 days. Macroscopic and histological evaluation was performed. RESULTS: Severe adhesions were found in group 2 (ID), group 6 (PEG + ID) and the controls. Best results were achieved with FS alone or FS + ID. Mesh integration in the treatment groups was reduced in comparison with the control group. This is a new finding possibly relevant for the outcome of intraperitoneal mesh repair. Group 6 (PEG + ID) showed an impairment of tissue integration with <50 % of the mesh surface in seven samples. CONCLUSION: FS alone and in combination with ID yielded excellent adhesion prevention. ID alone did not show significant adhesion prevention after 30 days. Tissue integration of FS-covered meshes was superior to ID or PEG alone or combined. PEG did show adhesion prevention comparable to FS but evoked impaired tissue integration. So Artiss® is among the most potent antiadhesive agents in IPOM repair.

[Basic research in traumatology and its contribution to routine operation]. / Unfallchirurgische Grundlagenforschung und ihr Beitrag für den Routinebetrieb.

Basic research in traumatology supports the clinical outcome of patients in trauma care and tries to find science-based solutions for clinical problems. Furthermore, institutions for basic research in traumatology usually offer training in different skills, such as how to write a scientific paper, or practice in microsurgery or intubation. Two examples of clinically significant research topics are presented.

Improved osteogenic vector for non-viral gene therapy.

Therapeutic compensation of deficient bone regeneration is a challenging task and a topic of on-going search for novel treatment strategies. One promising approach for improvement involves non-viral gene delivery using the bone morphogenetic protein-2 (BMP-2) gene to provide transient, local and sustained expression of the growth factor. However, since efficiency of non-viral gene delivery is low, this study focused on the improvement of a BMP-2 gene expression system, aiming for compensation of poor transfection efficiency. First, the native BMP-2 gene sequence was modified by codon optimisation and altered by inserting a highly truncated artificial intron (96 bp). Transfection of multiple cell lines and rat adipose-derived mesenchymal stem cells with plasmids harbouring the improved BMP-2 sequence led to a several fold increased expression rate and subsequent osteogenic differentiation. Additionally, comparing expression kinetics of elongation factor 1 alpha (EF1α) promoter with a state of the art CMV promoter revealed significantly higher BMP-2 expression when under the influence of the EF1α promoter. Results obtained by quantification of bone markers as well as osteogenic assays showed reduced sensitivity to promoter silencing effects of the EF1α promoter in rat adipose-derived mesenchymal stem cells. Finally, screening of several protein secretion signals using either luciferase or BMP-2 as reporter protein revealed no superior candidates for potential replacement of the native BMP-2 secretion signal. Taken together, by enhancing the exogenous BMP-2 expression system, low transfection efficiencies in therapeutic applications can be compensated, making safe non-viral systems even more suitable for tissue regeneration approaches.

A surprisingly poor correlation between in vitro and in vivo testing of biomaterials for bone regeneration: results of a multicentre analysis.

New regenerative materials and approaches need to be assessed through reliable and comparable methods for rapid translation to the clinic. There is a considerable need for proven in vitro assays that are able to reduce the burden on animal testing, by allowing assessment of biomaterial utility predictive of the results currently obtained through in vivo studies. The purpose of this multicentre review was to investigate the correlation between existing in vitro results with in vivo outcomes observed for a range of biomaterials. Members from the European consortium BioDesign, comprising 8 universities in a European multicentre study, provided data from 36 in vivo studies and 47 in vitro assays testing 93 different biomaterials. The outcomes of the in vitro and in vivo experiments were scored according to commonly recognised measures of success relevant to each experiment. The correlation of in vitro with in vivo scores for each assay alone and in combination was assessed. A surprisingly poor correlation between in vitro and in vivo assessments of biomaterials was revealed indicating a clear need for further development of relevant in vitro assays. There was no significant overall correlation between in vitro and in vivo outcome. The mean in vitro scores revealed a trend of covariance to in vivo score with 58 %. The inadequacies of the current in vitro assessments highlighted here further stress the need for the development of novel approaches to in vitro biomaterial testing and validated pre-clinical pipelines.

Fabrication of silk mesh with enhanced cytocompatibility: preliminary in vitro investigation toward cell-based therapy for hernia repair.

Recent studies have demonstrated that combining cells with meshes prior to implantation successfully enhanced hernia repair. The idea is to create a biologic coating surrounding the mesh with autologous cells, before transplantation into the patient. However, due to the lack of a prompt and robust cell adhesion to the meshes, extensive in vitro cultivation is required to obtain a homogenous cell layer covering the mesh. In this context, the objective of this publication is to manufacture meshes made of silk fibres and to enhance the cytoadhesion and cytocompatibility of the biomaterial by surface immobilization of a pro-adhesive wheat germ agglutinin (lectin WGA). We first investigated the affinity between the glycoprotein WGA and cells, in solution and then after covalent immobilization of WGA on silk films. Then, we manufactured meshes made of silk fibres, tailored them with WGA grafting and finally evaluated the cytocompatibility and the inflammatory response of silk and silk-lectin meshes compared to common polypropylene mesh, using fibroblasts and peripheral blood mononuclear cells, respectively. The in vitro experiments revealed that the cytocompatibility of silk can be enhanced by surface immobilization with lectin WGA without exhibiting negative response in terms of pro-inflammatory reaction. Grafting lectin to silk meshes could bring advantages to facilitate cell-coating of meshes prior to implantation, which is an imperative prerequisite for abdominal wall tissue regeneration using cell-based therapy.

Haemostatic profile of reconstituted blood in a proposed 1:1:1 ratio of packed red blood cells, platelet concentrate and four different plasma preparations.

The concept of haemostatic resuscitation implies early and high-volume plasma transfusion. We investigated the haemostatic profile of reconstituted whole blood prepared in a 1:1:1 ratio of blood, platelets and plasma. This consisted of packed red blood cells, platelet concentrate and four different plasma variants: fresh frozen; solvent-detergent; lyophilised quarantine; and lyophilised methylene blue-inactivated plasma. Haematocrit, platelet count, endogenous thrombin potential and coagulation factor activity were significantly lower in reconstituted blood compared with citrated whole blood (p < 0.01). Except for lyophilised methylene blue-inactivated plasma, no substantial differences between plasma variants in coagulation factor activity, endogenous thrombin potential and standard coagulation tests were observed. After reconstitution, haematocrit and platelet counts were slightly above recommended transfusion triggers, most thromboelastometry (ROTEM(®)) parameters were within the normal range and fibrinogen concentrations were between 1.57 g.l(-1) and 1.91 g.l(-1). Reconstitution of whole blood in a 1:1:1 ratio resulted in significant dilution of haematocrit and platelet count, but values remained above limits recommended by transfusion guidelines. Fibrinogen concentrations of reconstituted whole blood were also significantly reduced, and these were below the threshold value for supplementation recommended by recent guidelines.

Constitutive and inducible co-expression systems for non-viral osteoinductive gene therapy.

Tissue regenerative gene therapy requires expression strategies that deliver therapeutic effective amounts of transgenes. As physiological expression patterns are more complex than high-level expression of a singular therapeutic gene, we aimed at constitutive or inducible co-expression of 2 transgenes simultaneously. Co-expression of human bone morphogenetic protein 2 and 7 (BMP2/7) from constitutively expressing and doxycycline inducible plasmids was evaluated in vitro in C2C12 cells with osteocalcin reporter gene assays and standard assays for osteogenic differentiation. The constitutive systems were additionally tested in an in vivo pilot for ectopic bone formation after repeated naked DNA injection to murine muscle tissue. Inductor controlled differentiation was demonstrated in vitro for inducible co-expression. Both co-expression systems, inducible and constitutive, achieved significantly better osteogenic differentiation than single factor expression. The potency of the constitutive co-expression systems was dependent on relative expression cassette topology. In vivo, ectopic bone formation was demonstrated in 6/13 animals (46% bone formation efficacy) at days 14 and 28 in hind limb muscles as proven by in vivo µCT and histological evaluation. In vitro findings demonstrated that the devised single vector BMP2/7 co-expression strategy mediates superior osteoinduction, can be applied in an inductor controlled fashion and that its efficiency is dependent on expression cassette topology. In vivo results indicatethatco-expression of BMP2/7 applied by non-viral naked DNA gene transfer effectively mediates bone formation without the application of biomaterials, cells or recombinant growth factors, offering a promising alternative to current treatment strategies with potential for clinical translation in the future.

The impact of atraumatic fibrin sealant vs. staple mesh fixation in TAPP hernia repair on chronic pain and quality of life: results of a randomized controlled study.

BACKGROUND: Mesh reinforcement has become the standard of care in the open and laparoscopic repair of inguinal hernia. Chronic pain after inguinal hernia repair is often due to nerve injury by penetrating mesh fixation devices such as staples (ST), tacks, or sutures. In several studies on hernioplasty, atraumatic mesh fixation with fibrin sealant (FS) proved to be efficient in terms of fixation strength and elasticity. Unfortunately, most of these studies did not provide a standardized follow-up and assessment of the development of chronic pain (CP) and the quality of life (QoL). Therefore, a randomized controlled trial comparing CP and QoL after FS fixation of mesh with ST in transabdominal preperitoneal hernioplasty (TAPP) was performed at our department. The primary end point of our study was to assess the patient outcome by using a visual analog scale (VAS) and the short form 36 (SF-36). The evaluation of recurrence rates was the secondary aim. METHODS: According to the randomization, a macroporous mesh (TiMESH(®)) was fixed in group A (44 patients with 54 inguinal hernias) with FS (TISSEEL) or in group B (45 patients with 56 inguinal hernias) with ST (EMS(®) Stapler). The observation period was 1 year with regular clinical check ups and assessment of VAS and SF-36. RESULTS: Patient characteristics expressed by BMI, ASA scores, and Schumpelick hernia classification were similar in both treatment groups. In each group there was one recurrence within 8 (FS) and 9 months (ST) postsurgery. The mean preoperative pain values scored by VAS were 1.7 (range = 0-7.5) in the FS group and 2.2 (range = 0-6) in the ST group. Postoperative mean VAS scores measured at 1 year postsurgery were 0.4 (range = 0-3) in the FS group and 0.9 (range = 0-7.5) in the ST group. One year postsurgery there was no significant difference between the two groups with respect to the parameter pain in the SF-36 and VAS. CONCLUSION: Fibrin sealant fixation leads to a low rate of hernia recurrence and avoids tissue trauma. ST provide similar results in the hand of the expert but bear inherent risks of complications due to tissue perforation.

Comparison of three separate antiadhesive barriers for intraperitoneal onlay mesh hernia repair in an experimental model.

BACKGROUND: Adhesion formation is a common adverse effect in intraperitoneal onlay mesh (IPOM) surgery. Different methods of adhesion prevention have been developed, including coated meshes and separate antiadhesive barriers (SABs). In this study one type of mesh was tested with different SABs, which were fixed to the sutured mesh using fibrin sealant. The primary aim was to compare adhesion prevention between different SABs. Secondary aims were the assessment of tissue integration and evaluation of SAB fixation with fibrin sealant. METHODS: Thirty-two rats were randomized to one of three treatment groups (SurgiWrap, Prevadh and Seprafilm) or a control group (no SAB). Animals were operated on with an open IPOM technique (8 per group). One macroporous polypropylene mesh per animal (2 × 2 cm) was fixed with four non-absorbable sutures. An antiadhesive barrier of 2·5 × 2·5 cm was fixed with fibrin sealant. After 30 days, adhesion formation, tissue integration, seroma formation, inflammation and vascularization were evaluated macroscopically and by histology. RESULTS: Prevadh and Seprafilm groups showed a significant reduction in adhesion formation compared with the control group. Tissue integration of the mesh was reduced in these groups. Fibrin sealant fixed the SAB to the mesh securely in all groups. CONCLUSION: Prevadh and Seprafilm are potent materials for the reduction of adhesion formation. A potential relationship between effective adhesion prevention and impaired tissue integration of the implant was observed. Fibrin sealant proved an excellent agent for SAB fixation.

Human vital amniotic membrane reduces adhesions in experimental intraperitoneal onlay mesh repair.

BACKGROUND: Various antiadhesive coatings have been proposed for intraperitoneal onlay meshes (IPOM). However, adhesions, mesh infections, and impaired integration remain clinically relevant problems. In this experiment, human vital amniotic membrane (AM) was tested as antiadhesive mesh coating. Vital AM complies with clinical standards of product safety. METHODS: In this study, 24 rats were randomized to one control or two treatment groups (n=8). An uncoated polypropylene mesh (Vitamesh) was implanted using open IPOM technique and fixed with four sutures. In the treatment groups, vital AM was attached to Vitamesh by fibrin sealant fixation. The observation period was 7 and 17 days. Vitamesh fixed by suture only served as the control condition (17 days). Adhesion formation, tissue integration, and neovascularization were assessed macroscopically and histologically. RESULTS: All the meshes in the control group elicited severe adhesions. Vital AM was highly efficient in reducing adhesions to mesh and sutures. No foreign body reaction or unfavorable immunologic response to vital AM occurred. Tissue integration and neovascularization of coated meshes were good. Fibrin sealant yielded a reliable fixation. CONCLUSION: Human vital AM was highly effective in reducing adhesions to polypropylene mesh and sutures in experimental IPOM. No adverse effects were detected, and tissue integration of the mesh was good.

Biologic hernia implants in experimental intraperitoneal onlay mesh plasty repair: the impact of proprietary collagen processing methods and fibrin sealant application on tissue integration.

BACKGROUND: Biologic implants have been recommended for reinforcement in routine and challenging hernia repair. However, experimental and clinical studies have reported adverse effects (e.g., slow implant integration and pronounced foreign body reaction). To evaluate the impact of different material processing methods (cross-linking vs. non-cross-linking of collagen) and implant design, four different biologic hernia implants were compared directly in experimental intraperitoneal onlay mesh plasty (IPOM). Tissue integration, shrinkage, and foreign body reaction were primary outcome parameters. METHODS: In this study, 48 Sprague-Dawley rats were randomized to four treatment groups. Open IPOM repair was performed. One peritoneal defect per animal was covered with 2 × 2 cm patches of cross-linked or non-cross-linked implants including CollaMend (n = 12), Peripatch (n = 12), Surgisis (n = 12), and Tutomesh (n = 12). In half of the animals, fibrin sealant was applied for additional fixation and to cover sutures. The observation period was 60 days. The primary outcome parameters were implant integration, shrinkage, and foreign body reaction. Macroscopic and histologic assessments were performed. RESULTS: The integration of implants was insufficient in all the groups. The implants could be detached easily from the underlying tissue, and the penetration of fibroblasts and vessels was limited to the perforations. Foreign body reaction was pronounced with CollaMend and Surgisis, leading to persistent granulomatous inflammation. Shrinkage was excessive with Surgisis, whereas Tutomesh and Peripatch yielded sufficient anti-adhesion and elicited no foreign body reaction. CONCLUSION: At 2 months, cross-linked and non-cross-linked biologic hernia implants were poorly integrated. Cross-linking led to a more pronounced foreign body reaction. Less inflammatory response may reduce local complications, but did not enhance implant integration in this study.

Repopulation of decellularised articular cartilage by laser-based matrix engraving.

BACKGROUND: In spite of advances in the treatment of cartilage defects using cell and scaffold-based therapeutic strategies, the long-term outcome is still not satisfying since clinical scores decline years after treatment. Scaffold materials currently used in clinical settings have shown limitations in providing suitable biomechanical properties and an authentic and protective environment for regenerative cells. To tackle this problem, we developed a scaffold material based on decellularised human articular cartilage. METHODS: Human articular cartilage matrix was engraved using a CO2 laser and treated for decellularisation and glycosaminoglycan removal. Characterisation of the resulting scaffold was performed via mechanical testing, DNA and GAG quantification and in vitro cultivation with adipose-derived stromal cells (ASC). Cell vitality, adhesion and chondrogenic differentiation were assessed. An ectopic, unloaded mouse model was used for the assessment of the in vivo performance of the scaffold in combination with ASC and human as well as bovine chondrocytes. The novel scaffold was compared to a commercial collagen type I/III scaffold. FINDINGS: Crossed line engravings of the matrix allowed for a most regular and ubiquitous distribution of cells and chemical as well as enzymatic matrix treatment was performed to increase cell adhesion. The biomechanical characteristics of this novel scaffold that we term CartiScaff were found to be superior to those of commercially available materials. Neo-tissue was integrated excellently into the scaffold matrix and new collagen fibres were guided by the laser incisions towards a vertical alignment, a typical feature of native cartilage important for nutrition and biomechanics. In an ectopic, unloaded in vivo model, chondrocytes and mesenchymal stromal cells differentiated within the incisions despite the lack of growth factors and load, indicating a strong chondrogenic microenvironment within the scaffold incisions. Cells, most noticeably bone marrow-derived cells, were able to repopulate the empty chondrocyte lacunae inside the scaffold matrix. INTERPRETATION: Due to the better load-bearing, its chondrogenic effect and the ability to guide matrix-deposition, CartiScaff is a promising biomaterial to accelerate rehabilitation and to improve long term clinical success of cartilage defect treatment. FUNDING: Austrian Research Promotion Agency FFG ("CartiScaff" #842455), Lorenz Böhler Fonds (16/13), City of Vienna Competence Team Project Signaltissue (MA23, #18-08).

Pre-clinical evaluation of liposomal gene transfer to improve dermal and epidermal regeneration.

Liposomal gene transfer effectively enhances dermal and epidermal regeneration in burned rodents. To advance this treatment to clinical studies, we investigated the efficacy of liposomal gene transfer in a clinically relevant porcine wound model. Mimicking the clinical scenario, six female Yorkshire pigs (40-50 kg) received up to 12 burns of 50 cm(2) area that were fully excised and covered with skin autograft meshed at 4:1 ratio 24 h post-burn. Animals received control injections (empty liposomes), liposomes (DMRIE-C) containing 1 mg LacZ-cDNA, or liposomes (DMRIE-C) with 1 mg of platelet-derived growth factor (PDGF)-cDNA, or the naked PDGF gene. Serial biopsies were taken from different wound sites at multiple time points up to 12 days post-wounding. Transfection efficacy and transfection rate of LacZ and localization of beta-gal were determined by immunohistochemical and immunofluorescent techniques. RT-PCR and multiplex protein analysis (ELISA) were used to measure levels of growth factor mRNA transcribed and growth factor protein translated. Wound re-epithelialization and graft adhesion was evaluated using planimetric analysis and clinical scores. We found that peak transfection of liposomal beta-galactosidase occurred on day 2, with a fluorescence increase of 154% to baseline (P<0.001). Transfection intensity dropped to 115% above baseline on day 4 (P<0.001) and 109% on day 7. Immunohistochemistry showed a maximum transfection rate of 34% of cells in wound tissue. Gene transfer of liposomal PDGF-cDNA resulted in increased PDGF-mRNA and protein expression on days 2 and 4, and accelerated wound re-epithlialization as well as graft adhesion on day 9 (P<0.05). In this study, we showed that liposomal cDNA gene transfer is possible in a porcine wound model, and by using PDGF-cDNA we further showed that dermal and epidermal regeneration can be improved. These data indicate that liposomal gene transfer can be a new therapeutic approach to improve wound healing in humans.

A comparison of a bovine albumin/glutaraldehyde glue versus fibrin sealant for hernia mesh fixation in experimental onlay and IPOM repair in rats.

BACKGROUND: Research in hernia repair has targeted new atraumatic mesh fixation to reduce major complications such as chronic pain and adhesion formation. The efficacy and safety of two surgical adhesives, viz. Artiss® (FS, fibrin sealant containing 4 IU thrombin) and Bioglue® (AGG, bovine serum albumin/glutaraldehyde glue), were evaluated in this study. Primary study endpoints were tissue integration, dislocation, and adhesion formation. Foreign-body reaction formed the secondary study endpoint. METHODS: Twenty-four polypropylene meshes (VM, Vitamesh®) were randomized to four groups (n = 6): two groups of onlay hernia repair (two meshes per animal) with mesh fixation by FS (O-FS) or by AGG (O-AGG), and two groups of IPOM repair (one mesh per animal) with mesh fixation by four sutures and FS (I-FS) or AGG (I-AGG). Eighteen rats underwent surgery. Follow-up was 30 days. Tissue integration, dislocation, seroma formation, inflammation, adhesion formation, and foreign-body reaction were assessed. RESULTS: Meshes fixed with FS (O-FS, I-FS) showed good tissue integration. No dislocation, seroma formation, or macroscopic signs of inflammation were detectable. Adhesion formation of I-FS was significantly milder compared with I-AGG (P = 0.024). A moderate foreign-body reaction without active inflammation was seen histologically in O-FS and I-FS groups. Samples fixed with AGG (O-AGG, I-AGG) showed extensive scar formation. No dislocation and no seroma formation were observed. All of these samples showed moderate to severe signs of inflammation with abscess formation in the six meshes of O-AGG. Histology underlined these findings. CONCLUSIONS: The fibrin sealant adhesive showed very good overall results of the primary and secondary outcome parameters. FS is a recommendable atraumatic fixation tool for the surgical onlay technique. AGG provides high adhesive strength, but shows low biocompatibility. Persisting active inflammation was seen in both the O-AGG and I-AGG groups, not favoring its use for these indications.

Stromal vascular fraction cells as biologic coating of mesh for hernia repair.

BACKGROUND: The interest in non-manipulated cells originating from adipose tissue has raised tremendously in the field of tissue engineering and regenerative medicine. The resulting stromal vascular fraction (SVF) cells have been successfully used in numerous clinical applications. The aim of this experimental work is, first to combine a macroporous synthetic mesh with SVF isolated using a mechanical disruption process, and to assess the effect of those cells on the early healing phase of hernia. METHODS: Human SVF cells combined with fibrin were used to coat commercial titanized polypropylene meshes. In vitro, viability and growth of the SVF cells were assessed using live/dead staining and scanning electron microscopy. The influence of SVF cells on abdominal wall hernia healing was conducted on immunodeficient rats, with a focus on short-term vascularization and fibrogenesis. RESULTS: Macroporous meshes were easily coated with SVF using a fibrin gel as temporary carrier. The in vitro experiments showed that the whole process including the isolation of human SVF cells and their coating on PP meshes did not impact on the SVF cells' viability and on their capacity to attach and to proliferate. In vivo, the SVF cells were well tolerated by the animals, and coating mesh with SVF resulted in a decrease degree of vascularity compared to control group at day 21. CONCLUSIONS: The utilization of SVF-coated mesh influences the level of angiogenesis during the early onset of tissue healing. Further long-term animal experiments are needed to confirm that this effect correlates with a more robust mesh integration compared to non-SVF-coated mesh.

Biphasic calcium phosphate ceramics in small bone defects: potential influence of carrier substances and bone marrow on bone regeneration.

OBJECTIVES: Synthetic calcium phosphate bone substitutes such as hydroxyapatite (HA), beta-tricalcium phosphate (beta-TCP) or mixtures are alternatives to autogenous bone grafts. TricOs T((R)) and Collagraft((R)) are resorbable bone substitutes consisting of biphasic calcium phosphate and a bioactive matrix. Both products have a similar HA to beta-TCP ratio, but differ by their matrix. It was the aim of this study to determine the influence of matrix and autologous bone marrow on bone regeneration in a rabbit femoral condyle model. MATERIAL AND METHODS: A critical-sized bicortical channel with a diameter of 4.5 mm was drilled through the femoral condyles in male New Zealand rabbits. Collagraft((R)) with bone marrow harvested from the posterior iliac crest or TricOs T((R)) with and without bone marrow was introduced into the defect. Rabbits were euthanized 8 weeks later. The percentage of newly formed bone was determined by micro-computed tomography. RESULTS: There was no significant difference between bone ingrowth at 8 weeks. Thus, TricOs T((R)) without bone marrow showed similar bone ingrowth as Collagraft((R)) with bone marrow. Furthermore, no increase of bone ingrowth could be achieved by adding bone marrow to TricOs T((R)) in the present setting. CONCLUSION: Both bone substitutes showed similar bone ingrowth in this investigation. Using TricOs T((R)) without bone marrow could avoid donor site morbidity due to harvesting of bone marrow. Further prospective clinical trials will be needed to investigate this approach.

Histomorphometric Analysis of Callus Formation Stimulated by Axial Dynamisation in a Standardised Ovine Osteotomy Model.

The cyclic axial dynamisation of a stabilised fracture is intended to promote callus formation and bone healing. Most studies focused on biomechanical properties or the quantity of new bone formation. Far less is known about the quality of newly formed callus tissues, such as tissue distribution and arrangement within the callus. The aim of this current study was to investigate the effect of cyclic, axial dynamisation on the quantity and quality of callus in an established delayed fracture healing model. In 41 sheep transverse osteotomies with a gap size of 3 mm were stabilised with a unilateral external fixator. In 32 of these, fracture ends were axially stimulated with displacement amplitudes of 0.8 mm, 0.4 mm, 0.2 mm, or 0.0 mm, respectively, for six weeks. In the remaining 9 sheep of the control group, an additional external fixator was mounted to achieve almost total rigidity. Animal material originating from a past animal experiment was reanalysed in this study. Histological thin-ground sections were histomorphometrically analysed regarding the histological structure and composition of the defect region. A slight tendency towards an increase in size of total callus area, area of new bone (nB.Ar), and cartilage (Cg.Ar) was detected with increasing displacement amplitudes compared to the control group. At the anterior callus side nB.Ar and Cg.Ar were significantly larger than at the posterior side in all groups independent of treatment. Regarding the quality of callus, areas of very compact bone were predominant in the treatment groups whereas in the control group a slight shift to more porous bone was observed. No difference of callus compactness was observed between the anterior and the posterior side. The established method to assess the local compactness of callus areas is a useful tool to quantitatively determine the spatial distribution of new bone tissue within the callus. The application of this method in combination with biomechanical testing might reveal interesting relations between tissue distribution and bone strength that, with traditional histomorphometry, cannot be identified.

Repopulation of an auricular cartilage scaffold, AuriScaff, perforated with an enzyme combination.

Biomaterials currently in use for articular cartilage regeneration do not mimic the composition or architecture of hyaline cartilage, leading to the formation of repair tissue with inferior characteristics. In this study we demonstrate the use of "AuriScaff", an enzymatically perforated bovine auricular cartilage scaffold, as a novel biomaterial for repopulation with regenerative cells and for the formation of high-quality hyaline cartilage. AuriScaff features a traversing channel network, generated by selective depletion of elastic fibers, enabling uniform repopulation with therapeutic cells. The complex collagen type II matrix is left intact, as observed by immunohistochemistry, SEM and TEM. The compressive modulus is diminished, but three times higher than in the clinically used collagen type I/III scaffold that served as control. Seeding tests with human articular chondrocytes (hAC) alone and in co-culture with human adipose-derived stromal/stem cells (ASC) confirmed that the network enabled cell migration throughout the scaffold. It also guides collagen alignment along the channels and, due to the generally traverse channel alignment, newly deposited cartilage matrix corresponds with the orientation of collagen within articular cartilage. In an osteochondral plug model, AuriScaff filled the complete defect with compact collagen type II matrix and enabled chondrogenic differentiation inside the channels. Using adult articular chondrocytes from bovine origin (bAC), filling of even deep defects with high-quality hyaline-like cartilage was achieved after 6 weeks in vivo. With its composition and spatial organization, AuriScaff provides an optimal chondrogenic environment for therapeutic cells to treat cartilage defects and is expected to improve long-term outcome by channel-guided repopulation followed by matrix deposition and alignment. STATEMENT OF SIGNIFICANCE: After two decades of tissue engineering for cartilage regeneration, there is still no optimal strategy available to overcome problems such as inconsistent clinical outcome, early and late graft failures. Especially large defects are dependent on biomaterials and their scaffolding, guiding and protective function. Considering the currently used biomaterials, structure and mechanical properties appear to be insufficient to fulfill this task. The novel scaffold developed within this study is the first approach enabling the use of dense cartilage matrix, repopulate it via channels and provide the cells with a compact collagen type II environment. Due to its density, it also provides better mechanical properties than materials currently used in clinics. We therefore think, that the auricular cartilage scaffold (AuriScaff) has a high potential to improve future cartilage regeneration approaches.