Extensively Microtwinned Diamond with Nanolaminates of Lonsdaleite Formed by Flash Laser Heating of Glassy Carbon.

Diamond's unique properties on the nanoscale make it one of the most important materials for use in biosensors and quantum computing and for components that can withstand the harsh environments of space. We synthesize oriented, faceted diamond particles by flash laser heating of glassy carbon at 16 GPa and 2300 K. Detailed transmission electron microscopy shows them to consist of a mosaic of diamond nanocrystals frequently joined at twin boundaries forming microtwins. Striking 3-fold translational periodicity was observed in both imaging and diffraction. This periodicity was shown to originate from nanodimensional wedge-shaped overlapping regions of twinned diamond and not from a possible 9R polytype, which has also been reported in other group IVa elements and water ice. Extended bilayers of hexagonal layer stacking were observed, forming lonsdaleite nanolaminates. The particles exhibited optical fluorescence with a rapid quench time (<1 ns) attributed to their unique twinned microstructure.

A Telecom O-Band Emitter in Diamond.

Color centers in diamond are promising platforms for quantum technologies. Most color centers in diamond discovered thus far emit in the visible or near-infrared wavelength range, which are incompatible with long-distance fiber communication and unfavorable for imaging in biological tissues. Here, we report the experimental observation of a new color center that emits in the telecom O-band, which we observe in silicon-doped bulk single crystal diamonds and microdiamonds. Combining absorption and photoluminescence measurements, we identify a zero-phonon line at 1221 nm and phonon replicas separated by 42 meV. Using transient absorption spectroscopy, we measure an excited state lifetime of around 270 ps and observe a long-lived baseline that may arise from intersystem crossing to another spin manifold.

The effect of discrete wavelengths of visible light on the developing murine embryo.

PURPOSE: A current focus of the IVF field is non-invasive imaging of the embryo to quantify developmental potential. Such approaches use varying wavelengths to gain maximum biological information. The impact of irradiating the developing embryo with discrete wavelengths of light is not fully understood. Here, we assess the impact of a range of wavelengths on the developing embryo. METHODS: Murine preimplantation embryos were exposed daily to wavelengths within the blue, green, yellow, and red spectral bands and compared to an unexposed control group. Development to blastocyst, DNA damage, and cell number/allocation to blastocyst cell lineages were assessed. For the longer wavelengths (yellow and red), pregnancy/fetal outcomes and the abundance of intracellular lipid were investigated. RESULTS: Significantly fewer embryos developed to the blastocyst stage when exposed to the yellow wavelength. Elevated DNA damage was observed within embryos exposed to blue, green, or red wavelengths. There was no effect on blastocyst cell number/lineage allocation for all wavelengths except red, where there was a significant decrease in total cell number. Pregnancy rate was significantly reduced when embryos were irradiated with the red wavelength. Weight at weaning was significantly higher when embryos were exposed to yellow or red wavelengths. Lipid abundance was significantly elevated following exposure to the yellow wavelength. CONCLUSION: Our results demonstrate that the impact of light is wavelength-specific, with longer wavelengths also impacting the embryo. We also show that effects are energy-dependent. This data shows that damage is multifaceted and developmental rate alone may not fully reflect the impact of light exposure.

Acoustomicrofluidic Concentration and Signal Enhancement of Fluorescent Nanodiamond Sensors.

Diamond nitrogen-vacancy (NV) centers constitute a promising class of quantum nanosensors owing to the unique magneto-optic properties associated with their spin states. The large surface area and photostability of diamond nanoparticles, together with their relatively low synthesis costs, make them a suitable platform for the detection of biologically relevant quantities such as paramagnetic ions and molecules in solution. Nevertheless, their sensing performance in solution is often hampered by poor signal-to-noise ratios and long acquisition times due to distribution inhomogeneities throughout the analyte sample. By concentrating the diamond nanoparticles through an intense microcentrifugation effect in an acoustomicrofluidic device, we show that the resultant dense NV ensembles within the diamond nanoparticles give rise to an order-of-magnitude improvement in the measured acquisition time. The ability to concentrate nanoparticles under surface acoustic wave (SAW) microcentrifugation in a sessile droplet is, in itself, surprising given the well-documented challenge of achieving such an effect for particles below 1 µm in dimension. In addition to a demonstration of their sensing performance, we thus reveal in this work that the reason why the diamond nanoparticles readily concentrate under the SAW-driven recirculatory flow can be attributed to their considerably higher density and hence larger acoustic contrast compared to those for typical particles and cells for which the SAW microcentrifugation flow has been shown to date.

Encapsulation, Visualization and Expression of Genes with Biomimetically Mineralized Zeolitic Imidazolate Framework-8 (ZIF-8).

Recent work in biomolecule-metal-organic framework (MOF) composites has proven to be an effective strategy for the protection of proteins. However, for other biomacromolecules such as nucleic acids, the encapsulation into nano MOFs and the related characterizations are in their infancy. Herein, encapsulation of a complete gene-set in zeolitic imidazolate framework-8 (ZIF-8) MOFs and cellular expression of the gene delivered by the nano MOF composites are reported. Using a green fluorescent protein (GFP) plasmid (plGFP) as a proof-of-concept genetic macromolecule, successful transfection of mammalian cancer cells with plGFP for up to 4 days is shown. Cell transfection assays and soft X-ray cryo-tomography (cryo-SXT) demonstrate the feasibility of DNA@MOF biocomposites as intracellular gene delivery vehicles. Expression occurs over relatively prolonged time points where the cargo nucleic acid is released gradually in order to maintain sustained expression.

Spiropyran-Based Nanocarrier: A New Zn2+ -Responsive Delivery System with Real-Time Intracellular Sensing Capabilities.

A new spiropyran-based stimuli-responsive delivery system is fabricated. It encapsulates and then releases an extraneous compound in response to elevated levels of Zn2+ , a critical factor in cell apoptosis. A C12 -alkyl substituent on the spiropyran promotes self-assembly into a micelle-like nanocarrier in aqueous media, with nanoprecipitation and encapsulation of added payload. Zn2+ binding occurs to an appended bis(2-pyridylmethyl)amine group at biologically relevant micromolar concentration. This leads to switching of the spiropyran (SP) isomer to the strongly fluorescent ring opened merocyanine-Zn2+ (MC-Zn2+ ) complex, with associated expansion of the nanocarriers to release the encapsulated payload. Payload release is demonstrated in solution and in HEK293 cells by encapsulation of a blue fluorophore, 7-hydroxycoumarin, and monitoring its release using fluorescence spectroscopy and microscopy. Furthermore, the use of the nanocarriers to deliver a caspase inhibitor, Azure B, into apoptotic cells in response to an elevated Zn2+ concentration is demonstrated. This then inhibits intracellular caspase activity, as evidenced by confocal microscopy and in real-time by time-lapsed microscopy. Finally, the nanocarriers are shown to release an encapsulated proteasome inhibitor (5) in Zn2+ -treated breast carcinoma cell line models. This then inhibits intracellular proteasome and induces cytotoxicity to the carcinoma cells.

The effect of particle size on nanodiamond fluorescence and colloidal properties in biological media.

Fluorescent nanodiamonds (FNDs) are extremely photostable markers and nanoscale sensors, which are increasingly used in biomedical applications. Nanoparticle size is a critical parameter in the majority of these applications. Yet, the effect of particle size on FND's fluorescence and colloidal properties is not well understood today. Here, we investigate the fluorescence and colloidal stability of commercially available high-pressure high-temperature FNDs containing nitrogen-vacancy (NV) centers in biological media. Unconjugated FNDs in sizes ranging between 10 nm and 140 nm with an oxidized surface are studied using dynamic light scattering and fluorescence spectroscopy. We determine their colloidal stability in water, fetal bovine serum, Dulbecco's Modified Eagle Medium and complete media. The FNDs' relative fluorescence brightness, the NV charge-state, and the FND fluorescence against media autofluorescence are analyzed as a function of FND size. Our results will enable researchers in biology and beyond to identify the most promising FND particle size for their application.

Development of a glass-based imaging phantom to model the optical properties of human tissue.

The fabrication of a stable, reproducible optical imaging phantom is critical to the assessment and optimization of optical imaging systems. We demonstrate the use of an alternative material, glass, for the development of tissue-mimicking phantoms. The glass matrix was doped with nickel ions to approximate the absorption of hemoglobin. Scattering levels representative of human tissue were induced in the glass matrix through controlled crystallization at elevated temperatures. We show that this type of glass is a viable material for creating tissue-mimicking optical phantoms by providing controlled levels of scattering and absorption with excellent optical homogeneity, long-term stability and reproducibility.

Correlative Fluorescence and Transmission Electron Microscopy Assisted by 3D Machine Learning Reveals Thin Nanodiamonds Fluoresce Brighter.

Nitrogen vacancy (NV) centers in fluorescent nanodiamonds (FNDs) draw widespread attention as quantum sensors due to their room-temperature luminescence, exceptional photo- and chemical stability, and biocompatibility. For bioscience applications, NV centers in FNDs offer high-spatial-resolution capabilities that are unparalleled by other solid-state nanoparticle emitters. On the other hand, pursuits to further improve the optical properties of FNDs have reached a bottleneck, with intense debate in the literature over which of the many factors are most pertinent. Here, we describe how substantial progress can be achieved using a correlative transmission electron microscopy and photoluminescence (TEMPL) method that we have developed. TEMPL enables a precise correlative analysis of the fluorescence brightness, size, and shape of individual FND particles. Augmented with machine learning, TEMPL can be used to analyze a large, statistically meaningful number of particles. Our results reveal that FND fluorescence is strongly dependent on particle shape, specifically, that thin, flake-shaped particles are up to several times brighter and that fluorescence increases with decreasing particle sphericity. Our theoretical analysis shows that these observations are attributable to the constructive interference of light waves within the FNDs. Our findings have significant implications for state-of-the-art sensing applications, and they offer potential avenues for improving the sensitivity and resolution of quantum sensing devices.

Detection of Paramagnetic Spins with an Ultrathin van der Waals Quantum Sensor.

Detecting magnetic noise from small quantities of paramagnetic spins is a powerful capability for chemical, biochemical, and medical analysis. Quantum sensors based on optically addressable spin defects in bulk semiconductors are typically employed for such purposes, but the 3D crystal structure of the sensor inhibits sensitivity by limiting the proximity of the defects to the target spins. Here we demonstrate the detection of paramagnetic spins using spin defects hosted in hexagonal boron nitride (hBN), a van der Waals material that can be exfoliated into the 2D regime. We first create negatively charged boron vacancy (VB-) defects in a powder of ultrathin hBN nanoflakes (<10 atomic monolayers thick on average) and measure the longitudinal spin relaxation time (T1) of this system. We then decorate the dry hBN nanopowder with paramagnetic Gd3+ ions and observe a clear T1 quenching under ambient conditions, consistent with the added magnetic noise. Finally, we demonstrate the possibility of performing spin measurements, including T1 relaxometry using solution-suspended hBN nanopowder. Our results highlight the potential and versatility of the hBN quantum sensor for a range of sensing applications and make steps toward the realization of a truly 2D, ultrasensitive quantum sensor.

The Acoustophotoelectric Effect: Efficient Phonon-Photon-Electron Coupling in Zero-Voltage-Biased 2D SnS2 for Broad-Band Photodetection.

Two-dimensional (2D) layered metal dichalcogenides constitute a promising class of materials for photodetector applications due to their excellent optoelectronic properties. The most common photodetectors, which work on the principle of photoconductive or photovoltaic effects, however, require either the application of external voltage biases or built-in electric fields, which makes it challenging to simultaneously achieve high responsivities across broad-band wavelength excitation─especially beyond the material's nominal band gap─while producing low dark currents. In this work, we report the discovery of an intricate phonon-photon-electron coupling─which we term the acoustophotoelectric effect─in SnS2 that facilitates efficient photodetection through the application of 100 MHz order propagating surface acoustic waves (SAWs). This effect not only reduces the band gap of SnS2 but also provides the requisite momentum for indirect band gap transition of the photoexcited charge carriers, to enable broad-band photodetection beyond the visible light range, while maintaining pA-order dark currents─ without the need for any external voltage bias. More specifically, we show in the infrared excitation range that it is possible to achieve up to 8 orders of magnitude improvement in the material's photoresponsivity compared to that previously reported for SnS2-based photodetectors, in addition to exhibiting superior performance compared to most other 2D materials reported to date for photodetection.

Ultrasmall Nanodiamonds: Perspectives and Questions.

Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this perspective, we discuss recent advances, challenges, and opportunities in the synthesis, characterization, and application of ultrasmall nanodiamonds. We particularly focus on the advantages of bottom-up synthesis of these particles and critically assess the physicochemical properties of ultrasmall nanodiamonds, which significantly differ from those of larger particles and bulk diamond.

Targeting cell surface glycans with lectin-coated fluorescent nanodiamonds.

Glycosylation is arguably the most important functional post-translational modification in brain cells and abnormal cell surface glycan expression has been associated with neurological diseases and brain cancers. In this study we developed a novel method for uptake of fluorescent nanodiamonds (FND), carbon-based nanoparticles with low toxicity and easily modifiable surfaces, into brain cell subtypes by targeting their glycan receptors with carbohydrate-binding lectins. Lectins facilitated uptake of 120 nm FND with nitrogen-vacancy centers in three types of brain cells - U87-MG astrocytes, PC12 neurons and BV-2 microglia cells. The nanodiamond/lectin complexes used in this study target glycans that have been described to be altered in brain diseases including sialic acid glycans via wheat (Triticum aestivum) germ agglutinin (WGA), high mannose glycans via tomato (Lycopersicon esculentum) lectin (TL) and core fucosylated glycans via Aleuria aurantia lectin (AAL). The lectin conjugated nanodiamonds were taken up differently by the various brain cell types with fucose binding AAL/FNDs taken up preferentially by glioblastoma phenotype astrocyte cells (U87-MG), sialic acid binding WGA/FNDs by neuronal phenotype cells (PC12) and high mannose binding TL/FNDs by microglial cells (BV-2). With increasing recognition of glycans having a role in many diseases, the lectin bioconjugated nanodiamonds developed here are well suited for further investigation into theranostic applications.

Large Area Ultrathin InN and Tin Doped InN Nanosheets Featuring 2D Electron Gases.

Indium nitride (InN) has been of significant interest for creating and studying two-dimensional electron gases (2DEG). Herein we demonstrate the formation of 2DEGs in ultrathin doped and undoped 2D InN nanosheets featuring high carrier mobilities at room temperature. The synthesis is carried out via a two-step liquid metal-based printing method followed by a microwave plasma-enhanced nitridation reaction. Ultrathin InN nanosheets with a thickness of ∼2 ± 0.2 nm were isolated over large areas with lateral dimensions exceeding centimeter scale. Room temperature Hall effect measurements reveal carrier mobilities of ∼216 and ∼148 cm2 V-1 s-1 for undoped and doped InN, respectively. Further analysis suggests the presence of defined quantized states in these ultrathin nitride nanosheets that can be attributed to a 2D electron gas forming due to strong out-of-plane confinement. Overall, the combination of electronic and plasmonic features in undoped and doped ultrathin 2D InN holds promise for creating advanced optoelectronic devices and functional 2D heterostructures.

The effect of salt and particle concentration on the dynamic self-assembly of detonation nanodiamonds in water.

Detonation nanodiamonds (DNDs) are becoming increasingly important in science and technology with applications from drug delivery to tribology. DNDs are known to self-assemble into fractal-like aggregates in water, but their colloidal properties remain poorly understood. Here, the effect of salt and particle concentration on the size and shape of these aggregates is investigated using dynamic light scattering and small-angle X-ray scattering. Our results suggest the existence of two particle aggregate populations with diameters on the scale of 50 nm and 300 nm, respectively. The concentration of NaCl, in the range 0.005-1 mM, does not have a significant effect on the size or shape of the particle aggregates. The hydrodynamic radius of both aggregate populations decreases as the DND concentration increases from 0.01 to 2 mg mL-1. At the same time, the particle aggregates become denser and their overall shape changes from disk-like to rod-like with increasing DND concentration. We identify unexpected similarities between the aggregate structures observed for DNDs and those commonly observed for concentrated colloidal particles in high salt environments, described by classical colloid aggregation theories. Our results contribute to the fundamental understanding of the colloidal properties of DNDs and pave the way for the engineering of novel nanoparticle-based systems that make use of DNDs' unique colloidal properties for future applications.

Acoustomicrofluidic Synthesis of Pristine Ultrathin Ti3C2Tz MXene Nanosheets and Quantum Dots.

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration-on the order of 10 million g's-produced by high-frequency (10 MHz) nanometer-order electromechanical vibrations on a chip-scale piezoelectric substrate is capable of efficiently nebulizing, and consequently dimensionally reducing, a suspension of multilayer Ti3C2Tz (MXene) into predominantly monolayer nanosheets and quantum dots while, importantly, preserving the material from any appreciable oxidation. As an example application, we show that the high-purity MXene quantum dots produced using this room-temperature chemical-free synthesis method exhibit superior performance as electrode materials for electrochemical sensing of hydrogen peroxide compared to the highly oxidized samples obtained through conventional hydrothermal synthesis. The ability to detect concentrations as low as 5 nM is a 10-fold improvement to the best reported performance of Ti3C2Tz MXene electrochemical sensors to date.

Multimodal Imaging and Soft X-Ray Tomography of Fluorescent Nanodiamonds in Cancer Cells.

Multimodal imaging promises to revolutionize the understanding of biological processes across scales in space and time by combining the strengths of multiple imaging techniques. Fluorescent nanodiamonds (FNDs) are biocompatible, chemically inert, provide high contrast in light- and electron-based microscopy, and are versatile optical quantum sensors. Here it is demonstrated that FNDs also provide high absorption contrast in nanoscale 3D soft X-ray tomograms with a resolution of 28 nm in all dimensions. Confocal fluorescence, atomic force, and scanning electron microscopy images of FNDs inside and on the surface of PC3 cancer cells with sub-micrometer precision are correlated. FNDs are found inside ≈1 µm sized vesicles present in the cytoplasm, providing direct evidence of the active uptake of bare FNDs by cancer cells. Imaging artefacts are quantified and separated from changes in cell morphology caused by sample preparation. These results demonstrate the utility of FNDs in multimodal imaging, contribute to the understanding of the fate of FNDs in cells, and open up new possibilities for biological imaging and sensing across the nano- and microscale.

Thermophoresis of single stranded DNA.

The manipulation and analysis of biomolecules in native bulk solution is highly desired; however, few methods are available. In thermophoresis, the thermal analog to electrophoresis, molecules are moved along a microscopic temperature gradient. Its theoretical foundation is still under debate, but practical applications for analytics in biology show considerable potential. Here we measured the thermophoresis of highly diluted single stranded DNA using an all-optical capillary approach. Temperature gradients were created locally by an infrared laser. The thermal depletion of oligonucleotides of between 5 and 50 bases in length were investigated by fluorescence at various salt concentrations. To a good approximation, the previously tested capacitor model describes thermophoresis: the Soret coefficient linearly depends on the Debye length and is proportional to the DNA length to the power of 0.35, dictated by the conformation-based size scaling of the diffusion coefficient. The results form the basis for quantitative DNA analytics using thermophoresis.

3D-Printed Diamond-Titanium Composite: A Hybrid Material for Implant Engineering.

Diamond-based implant materials make up an emerging research area where the materials could be prepared to promote cellular functions, decrease bacteria attachment, and be suitable for potential in situ imaging. Up until now, diamond implants have been fabricated using coating technologies or embedding diamond nanoparticles in polymer matrices. Here we demonstrated a method of manufacturing diamond implants using laser cladding technology to 3D print a composite of diamond and fused titanium material. Using this method, we could prepare composite scaffolds of up to 50% diamond, which has never been achieved before. We next investigated the interfacial properties of these scaffolds for potential applications in implants. The addition of diamond to the biomaterial results in a 30% decrease in the water contact angle, making the scaffolds more hydrophilic and improving cellular adhesion and proliferation.

Dynamic self-assembly of detonation nanodiamond in water.

Nanodiamonds are increasingly used in many areas of science and technology, yet, their colloidal properties remain poorly understood. Here we use direct imaging as well as light and X-ray scattering reveal that purified detonation nanodiamond (DND) particles in an aqueous environment exhibit a self-assembled lace-like network, even without additional surface modification. Such behaviour is previously unknown and contradicts the current consensus that DND exists as mono-dispersed single particles. With the aid of mesoscale simulations, we show that the lace network is likely the result of competition between a short-ranged electrostatic attraction between faceted particles and a longer-ranged repulsion arising from the interaction between the surface functional groups and the surrounding water molecules which prevents complete flocculation. Our findings have significant implications for applications of DND where control of the aggregation behaviour is critical to performance.