Fabrication of Patchy Silica Microspheres with Tailor-Made Patch Functionality using Photo-Iniferter Reversible-Addition-Fragmentation Chain-Transfer (PI-RAFT) Polymerization.

Their inherent directional information renders patchy particles interesting building blocks for advanced applications in materials science. In this study, a feasible method to fabricate patchy silicon dioxide microspheres is demonstrated, which they are able to equip with tailor-made polymeric materials as patches. Their fabrication method relies on a solid-state supported microcontact printing (µCP) routine optimized for the transfer of functional groups to capillary-active substrates, which is used to introduce amino functionalities as patches to a monolayer of particles. Acting as anchor groups for polymerization, photo-iniferter reversible addition-fragmentation chain-transfer (RAFT) is used to graft polymer from the patch areas. Accordingly, particles with poly(N-acryloyl morpholine), poly(N-isopropyl acrylamide), and poly(n-butyl acrylate) are prepared as representative acrylic acid-derived functional patch materials. To facilitate their handling in water, a passivation strategy of the particles for aqueous systems is introduced. The protocol introduced here, therefore, promises a vast degree of freedom in engineering the surface properties of highly functional patchy particles. This feature is unmatched by other techniques to fabricate anisotropic colloids. The method, thus, can be considered a platform technology, culminating in the fabrication of particles that possess locally precisely formed patches on particles at a low µm scale with a high material functionality.

Light-Dependent RAFT Polymerization of Spiropyran Acrylates.

A light-assisted RAFT copolymerization protocol is established and investigated for the synthesis of 2-hydroxyethyl acrylate (HEA) / spiropyran acrylate (SPA) copolymers with enhanced SPA-contents. Radiation with visible light prevents the spiropyran (SP) motif from isomerizing into the open merocyanine (MC) form which can interfere with the polymerization process by abstracting a hydrogen atom from an active radical via its phenolic oxygen.

Modification of 3D-Printed PLA Structures Using Photo-Iniferter Polymerization: Toward On-Demand Antimicrobial Water Filters.

Water filtration is an important application to ensure the accessibility of clean drinking water. As requirements and contaminants vary on a local level, adjustable filter devices and their evaluation with contaminants are required. Within this work, modular filter devices are designed featuring an adjustable surface functionalization. For this purpose, 3D-printed structures are created consisting of bio-based poly(lactic acid) (PLA) that are manufactured by extrusion printing. The surface of PLA is activated with amino groups that are used to install xanthates as chain transfer agents. Subsequently, photo-iniferter (PI) polymerization is used to create cationic polymer brushes on the surface of PLA substrates. Multiple surface characterization techniques are employed to prove successful growth of polymer brushes on PLA. After initial optimization studies on flat surfaces, filter devices are printed, functionalized, and used to remove bacteria from contaminated water. Significant reduction of the number of microorganisms is detected after filtration (single filtration or cycling) and contaminating organism can also be removed from freshwater samples by simple incubation with a 3D-printed filter. The herein developed setup for producing functional filter devices and probing their performance in affinity filtration is a useful platform technology, enabling the rapid testing of polymer brushes for such applications.

Biocatalytically Active Thin Films via Self-Assembly of 2-Deoxy-d-ribose-5-phosphate Aldolase-Poly(N-isopropylacrylamide) Conjugates.

2-Deoxy-d-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. However, substrate as well as product inhibition requires a more-sophisticated process design for the synthesis of these motifs. One way to do so is to the couple aldehyde conversion with transport processes, which, in turn, would require an immobilization of the enzyme within a thin film that can be deposited on a membrane support. Consequently, we developed a fabrication process for such films that is based on the formation of DERA-poly(N-isopropylacrylamide) conjugates that are subsequently allowed to self-assemble at an air-water interface to yield the respective film. In this contribution, we discuss the conjugation conditions, investigate the interfacial properties of the conjugates, and, finally, demonstrate a successful film formation under the preservation of enzymatic activity.

Control of glycopolymer nanoparticle morphology by a one-pot, double modification procedure using thiolactones.

A copolymer from N-isopropylacryl amide (NIPAAm) and N-homocysteine thiolactone acrylamide (TlaAm), prepared by RAFT polymerization, is reacted with various amines, bearing alkyl residues of increasing length (n-propylamine, n-hexylamine, and n-dodecylamine) to liberate the corresponding thiol, which is consequently reacted in situ with 2-bromoethyl-2',3',4',6'-tetra-O-acetyl-α-d-mannopyranoside. The resulting double-modified graft copolymers show characteristic self-assembly behavior due to their amphiphilic nature, affording glycopoly-mer-based nanoparticles. While the n-propylamine-derived amphiphiles mainly lead to micelles (30 nm), the n-hexylamine adducts give rise to larger vesicles (200-600 nm). Longer alkyl amines result in the formation of large compound micelles. The assembled nanoparticles are bioactive and interact effectively with Concanavalin A (ConA).

Mechanochemical Activation of Anthracene [4+4] Cycloadducts.

Controlled formation and breaking of weak chemical bonds is a versatile method for modifying the properties of materials. Anthracene [4+4] cycloadducts are a prime example that can be formed by light and opened by external forces. We address the theoretical description of mechanochemistry of these cycloadducts, where the standard constraint geometry simulates forces approach fails due to the lack of consideration of temperature. Explicit inclusion of external forces reveals the corresponding transition barriers that are clearly dominated by rupture of the [4+4] inter-anthracene bonds. Other bonds come into play at extremely large forces only, which cannot be expected to be reached under ambient conditions. The theoretical results are in line with the experimental rheology of [4+4]-linked anthracene polymers, which indicates reversible re-formation of [4+4] cycloaddition bonds with ultraviolet light after mechanochemical bond breaking due to applied shear stress.

Solid-Phase Microcontact Printing for Precise Patterning of Rough Surfaces: Using Polymer-Tethered Elastomeric Stamps for the Transfer of Reactive Silanes.

We present a microcontact printing (µCP) routine suitable to introduce defined (sub-) microscale patterns on surface substrates exhibiting a high capillary activity and receptive to a silane-based chemistry. This is achieved by transferring functional trivalent alkoxysilanes, such as (3-aminopropyl)-triethoxysilane (APTES) as a low-molecular weight ink via reversible covalent attachment to polymer brushes grafted from elastomeric polydimethylsiloxane (PDMS) stamps. The brushes consist of poly{N-[tris(hydroxymethyl)-methyl]acrylamide} (PTrisAAm) synthesized by reversible addition-fragmentation chain-transfer (RAFT)-polymerization and used for immobilization of the alkoxysilane-based ink by substituting the alkoxy moieties with polymer-bound hydroxyl groups. Upon physical contact of the silane-carrying polymers with surfaces, the conjugated silane transfers to the substrate, thus completely suppressing ink-flow and, in turn, maximizing printing accuracy even for otherwise not addressable substrate topographies. We provide a concisely conducted investigation on polymer brush formation using atomic force microscopy (AFM) and ellipsometry as well as ink immobilization utilizing two-dimensional proton nuclear Overhauser enhancement spectroscopy (1H-1H-NOESY-NMR). We analyze the µCP process by printing onto Si-wafers and show how even distinctively rough surfaces can be addressed, which otherwise represent particularly challenging substrates.

Switching enzyme activity by a temperature responsive inhibitor modified polymer.

A thermoresponsive NIPAAm-based polymer is combined with the selective acetylcholinesterase inhibitor tacrine in order to create a strict in sense on/off switch for enzymatic activity. This polymer-inhibitor conjugate inhibits AChE at room temperature and enables reactivation of AChE by heating above the cloud point of the conjugate.

Biocatalytically active microgels by precipitation polymerization of N-isopropyl acrylamide in the presence of an enzyme.

We present a novel protocol for the synthesis of enzymatically active microgels. The protocol is based on the precipitation polymerization of N-isopropylacrylamide (NIPAm) in the presence of an enzyme and a protein binding comonomer. A basic investigation on the influence of different reaction parameters such as monomer concentration and reaction temperature on the microgel size and size distribution is performed and immobilization yields are determined. Microgels exhibiting hydrodynamic diameters between 100 nm and 1 µm and narrow size distribution could be synthesized while about 31-44% of the enzyme present in the initial reaction mixture can be immobilized. Successful immobilization including a verification of enzymatic activity of the microgels is achieved for glucose oxidase (GOx) and 2-deoxy-d-ribose-5-phosphate aldolase (DERA). The thermoresponsive properties of the microgels are assessed and discussed in the light of activity evolution with temperature. The positive correlation of enzymatic activity with temperature for the GOx containing microgel originates from a direct interaction of the enzyme with the PNIPAm based polymer matrix whose magnitude is highly influenced by temperature.

A Biocatalytically Active Membrane Obtained from Immobilization of 2-Deoxy-d-ribose-5-phosphate Aldolase on a Porous Support.

Aldol reactions play an important role in organic synthesis, as they belong to the class of highly beneficial C-C-linking reactions. Aldol-type reactions can be efficiently and stereoselectively catalyzed by the enzyme 2-deoxy-d-ribose-5-phosphate aldolase (DERA) to gain key intermediates for pharmaceuticals such as atorvastatin. The immobilization of DERA would open the opportunity for a continuous operation mode which gives access to an efficient, large-scale production of respective organic intermediates. In this contribution, we synthesize and utilize DERA/polymer conjugates for the generation and fixation of a DERA bearing thin film on a polymeric membrane support. The conjugation strongly increases the tolerance of the enzyme toward the industrial relevant substrate acetaldehyde while UV-cross-linkable groups along the conjugated polymer chains provide the opportunity for covalent binding to the support. First, we provide a thorough characterization of the conjugates followed by immobilization tests on representative, nonporous cycloolefinic copolymer supports. Finally, immobilization on the target supports constituted of polyacrylonitrile (PAN) membranes is performed, and the resulting enzymatically active membranes are implemented in a simple membrane module setup for the first assessment of biocatalytic performance in the continuous operation mode using the combination hexanal/acetaldehyde as the substrate.

Immobilization of 2-Deoxy-d-ribose-5-phosphate Aldolase in Polymeric Thin Films via the Langmuir-Schaefer Technique.

A synthetic protocol for the fabrication of ultrathin polymeric films containing the enzyme 2-deoxy-d-ribose-5-phosphate aldolase from Escherichia coli (DERAEC) is presented. Ultrathin enzymatically active films are useful for applications in which only small quantities of active material are needed and at the same time quick response and contact times without diffusion limitation are wanted. We show how DERA as an exemplary enzyme can be immobilized in a thin polymer layer at the air-water interface and transferred to a suitable support by the Langmuir-Schaefer technique under full conservation of enzymatic activity. The polymer in use is a poly(N-isopropylacrylamide-co-N-2-thiolactone acrylamide) (P(NIPAAm-co-TlaAm)) statistical copolymer in which the thiolactone units serve a multitude of purposes including hydrophobization of the polymer, covalent binding of the enzyme and the support and finally cross-linking of the polymer matrix. The application of this type of polymer keeps the whole approach simple as additional cocomponents such as cross-linkers are avoided.

Polythiolactone-based redox-responsive layers for the reversible release of functional molecules.

The development of thin macromolecular layers with incorporated disulfide bonds that can be disrupted and formed again under redox stimulation is of general interest for drug release applications, because such layers can provide rapid and reversible responses to specific biological systems and signals. However, the preparation of such layers from polythiols remains difficult, because of the fast oxidation of thiol groups in ambient conditions. Here we propose water-soluble thiolactone-containing copolymers as stable precursors containing protected thiol groups, allowing us to produce on demand polythiol layers on gold substrates in the presence of amine derivatives. Electrochemical, water contact angle, X-ray photoelectron spectroscopy, and X-ray reflectometry measurements evidence the formation of uniform copolymer layers containing both anchored and free thiol groups. The number of free thiols increases with the content of thiolactone units in the copolymers. In a second step, a thiolated dye, used as a model drug, was successfully grafted on the free thiol groups through disulfide bonds using mild oxidizing conditions, as proved by fluorescence and quartz crystal microbalance measurements. Finally, the reversible release/regrafting of the dye under redox stimulation is demonstrated.

One-Pot Double Modification of p(NIPAAm): A Tool for Designing Tailor-Made Multiresponsive Polymers.

A quantitative, additive-free, and one-pot reaction cascade involving the ring-opening of a thiolactone by primary amine treatment and subsequent conversion of the released thiol groups via Michael addition to an acrylate has been utilized for the double modification/functionalization of poly(N-isopropyl acrylamide), yielding tailor-made thermoresponsive polymers. After proving a quantitative double functionalization, different amine/acrylate combinations were employed in order to demonstrate the general applicability of the concept. Cloud points can be tuned by adjusting the amount of ring-opening amine in the reaction mixture, which enables to control the degree of modification.

Facile Access to Hydroxy-Functional Core-Shell Microspheres via Grafting of Ethylene Oxide by Anionic Ring-Opening Polymerization.

We present a facile access route to hydroxy-functional narrow disperse microspheres of well-defined grafting density (GD). Ethylene oxide has been grafted from highly crosslinked poly(divinyl benzene) microspheres by anionic ring-opening polymerization using sec-butyllithium as activator together with the phosphazene base t-BuP(4) . Initially, core microspheres have been prepared by precipitation polymerization utilizing divinyl benzene (DVB, 80 wt.-%). The grafting of poly(ethylene oxide) (PEO) from the surface resulted in the formation of functional core-shell microspheres with hydroxy-terminal end groups. The number average particle diameter of the grafted microspheres was 3.6 µm and the particle weight increased by 5.7%. The microspheres were characterized by SEM, FT-IR spectroscopy, elemental analysis, and fluorescence microscopy. The surface GD (determined via two methods) was 1.65 ± 0.06 and 2.09 ± 0.08 chains · nm(-2) , respectively.