Integrative analysis of the metabolome and transcriptome provides insights into the mechanisms of lignan biosynthesis in Herpetospermum pedunculosum (Cucurbitaceae).

BACKGROUND: Herpetospermum pedunculosum (Ser.) C. B. Clarke is a traditional Chinese herbal medicine that heavily relies on the lignans found in its dried ripe seeds (Herpetospermum caudigerum), which have antioxidant and hepatoprotective functions. However, little is known regarding the lignan biosynthesis in H. pedunculosum. In this study, we used metabolomic (non-targeted UHPLC-MS/MS) and transcriptome (RNA-Seq) analyses to identify key metabolites and genes (both structural and regulatory) associated with lignan production during the green mature (GM) and yellow mature (YM) stages of H. pedunculosum. RESULTS: The contents of 26 lignan-related metabolites and the expression of 30 genes involved in the lignan pathway differed considerably between the GM and YM stages; most of them were more highly expressed in YM than in GM. UPLC-Q-TOF/MS confirmed that three Herpetospermum-specific lignans (including herpetrione, herpetotriol, and herpetin) were found in YM, but were not detected in GM. In addition, we proposed a lignan biosynthesis pathway for H. pedunculosum based on the fundamental principles of chemistry and biosynthesis. An integrated study of the transcriptome and metabolome identified several transcription factors, including HpGAF1, HpHSFB3, and HpWOX1, that were highly correlated with the metabolism of lignan compounds during seed ripening. Furthermore, functional validation assays revealed that the enzyme 4-Coumarate: CoA ligase (4CL) catalyzes the synthesis of hydroxycinnamate CoA esters. CONCLUSION: These results will deepen our understanding of seed lignan biosynthesis and establish a theoretical basis for molecular breeding of H. pedunculosum.

Trade-off between climatic and human population impacts on Aedes aegypti life history shapes its geographic distribution.

The annual death statistics due to vector-borne diseases transmitted by Aedes mosquitoes cause a still growing concern for the public health in the affected regions. An improved understanding of how climatic and population changes impact the spread of Aedes aegypti will help estimate the future populations exposure and vulnerability, and is essential to the improvement of public health preparedness. We apply an empirically well-investigated process-based mathematical model based on the life cycle of the mosquito to assess how climate scenarios (Representative Concentration Pathways (RCP)) and population scenarios (Shared Socioeconomic Pathways (SSP)) will affect the growth and potential distribution of this mosquito in China. Our results show that the risk area is predicted to expand considerably, increasing up to 21.46% and 24.75% of China's land area in 2050 and 2070, respectively, and the new added area lies mainly in the east and center of China. The population in the risk area grows substantially up to 2050 and then drops down steadily. However, these predicted changes vary noticeably among different combinations between RCPs and SSPs with the RCP2.6*SSP4 yielding the most favorable scenario in 2070, representing approximately 14.11% of China's land area and 113 cities at risk, which is slightly lower compared to 2019. Our results further reveal that there is a significant trade-off between climatic and human population impacts on the spreading of Aedes aegypti, possibly leading to an overestimation (underestimation) in sparsely (densely) populated areas if the populations impact on the mosquito's life history is unaccounted for. These results suggest that both climate and population changes are crucial factors in the formation of the populations exposure to Aedes-borne virus transmission in China, however, a reduced population growth rate may slow down the spread of this mosquito by effectively counteracting the climate warming impacts.

Evaluation of a New Thermal Fog Machine for Control of Adult Aedes albopictus in a Large Enclosed Space.

Testing of the PSO BASDKA-AC1200 multifunction ultrafine particle atomization machine, a thermal fog machine, with Aqualuer 20-20(®) (permethrin 20.6%, piperonyl butoxide 20.6%) was conducted against Aedes albopictus. The machine was set at a 40 sec maximum burst interval dispersing 36 ml of chemical with an average droplet volume of 50%. Female adult Ae. albopictus were placed into cylindrical paper cages and adhered to poles at 5, 8, 10, 15, and 25 m from the center point of the machine. Control cages consisted of 1 cage placed at 5, 10, and 25 m. Control and treatment groups were left in the experiment area for 15 min. Initial knockdown after 15 min and 24 h mortality were documented. At 15 min post-treatment, Ae. albopictus displayed less than 50% knockdown. After 24 h, all treatment cages displayed greater than 90% mortality. Further bottle bioassays were conducted to determine the lowest chemical dose possible to achieve a lethal dose of 90%. A 1% dilution (10 ml Aqualuer 20-20 to 1,000 ml of polyether) of Aqualuer showed high mortality in the laboratory. However, after running 3 repetitions of a 1% dilution, there was no significant difference between the mortality of the mosquitoes at any of the distances 24 h post-treatment. This study indicates that the test machine would be an applicable and suitable machine for control of Ae. albopictus in enclosed spaces.

Telephone follow-up based on artificial intelligence technology among hypertension patients: Reliability study.

Artificial intelligence (AI) telephone is reliable for the follow-up and management of hypertensives. It takes less time and is equivalent to manual follow-up to a high degree. We conducted a reliability study to evaluate the efficiency of AI telephone follow-up in the management of hypertension. During May 18 and June 30, 2020, 350 hypertensives managed by the Pengpu Community Health Service Center in Shanghai were recruited for follow-up, once by AI and once by a human. The second follow-up was conducted within 3-7 days (mean 5.5 days). The mean length time of two calls were compared by paired t-test, and Cohen's Kappa coefficient was used to evaluate the reliability of the results between the two follow-up visits. The mean length time of AI calls was shorter (4.15 min) than that of manual calls (5.24 min, P < .001). The answers related to the symptoms showed moderate to substantial consistency (κ:.465-.624, P < .001), and those related to the complications showed fair consistency (κ:.349, P < .001). In terms of lifestyle, the answer related to smoking showed a very high consistency (κ:.915, P < .001), while those addressing salt consumption, alcohol consumption, and exercise showed moderate to substantial consistency (κ:.402-.645, P < .001). There was moderate consistency in regular usage of medication (κ:.484, P < .001).

Smart Solid-State Interphases Enable High-Safety and High-Energy Practical Lithium Batteries.

With the electrochemical performance of batteries approaching the bottleneck gradually, it is increasingly urgent to solve the safety issue. Herein, all-in-one strategy is ingeniously developed to design smart, safe, and simple (3S) practical pouch-type LiNi0.8Co0.1Mn0.1O2||Graphite@SiO (NCM811||Gr@SiO) cell, taking full advantage of liquid and solid-state electrolytes. Even under the harsh thermal abuse and high voltage condition (100 °C, 3-4.5 V), the pouch-type 3S NCM811||Gr@SiO cell can present superior capacity retention of 84.6% after 250 cycles (based pouch cell: 47.8% after 250 cycles). More surprisingly, the designed 3S NCM811||Gr@SiO cell can efficiently improve self-generated heat T1 by 45 °C, increase TR triggering temperature T2 by 40 °C, and decrease the TR highest T3 by 118 °C. These superior electrochemical and safety performances of practical 3S pouch-type cells are attributed to the robust and stable anion-induced electrode-electrolyte interphases and local solid-state electrolyte protection layer. All the fundamental findings break the conventional battery design guidelines and open up a new direction to develop practical high-performance batteries.

Initial stage oxidation corrosion of commercial ferritic stainless steels with different Cr contents at 650 °C for solid oxide fuel cells.

Selecting adequate ferritic stainless steel (FSS) with a high corrosion resistance and a low cost is critical for solid oxide fuel cells (SOFCs) operating at intermediate temperature. In this study, the corrosion behaviors of four commercial FSSs involving TS430, TY441, YG442, and TY445 with a Cr content ranging from 16.18 wt.% to 21.73 wt.% are investigated at 650 °C. The oxidation mass gains, microstructures of surface oxide scale, and electrical conductivities are measured. The effects of grain size as well as doped elements are estimated together with the Cr volatilization. Flaky Cr2O3 particles are formed on TS430 and TY441 dominated by the outward migration of Cr3+. In comparison, a thin and dense layer of chromia is observed on YG442 and TY445. A high Cr content and a uniformly distributed grain size are conducive to the formation of a thin and dense chromia scale on the FSS surface during the initial oxidation process. On the other hand, the addition of Nb, Ti, and Mo weakens the outward diffusion of Cr3+ and reduces the particle size of chromia. After oxidation at 650 °C for 120 h, scattered (Mn, Cr)3O4 spinel particles occur on TS430, YG442, and TY445. TY445 and YG442 exhibit a higher conductivity although all the results of area specific resistance (ASR) are less than 6 mΩ·cm2. Meanwhile, the effect of Cr volatilization is enlarged on the estimation of mass gain at 650 °C compared with even higher temperatures.

In Situ Polymerization Facilitating Practical High-Safety Quasi-Solid-State Batteries.

Quasi-solid-state batteries (QSSBs) are gaining widespread attention as a promising solution to improve battery safety performance. However, the safety improvement and the underlying mechanisms of QSSBs remain elusive. Herein, a novel strategy combining high-safety ethylene carbonate-free liquid electrolyte and in situ polymerization technique is proposed to prepare practical QSSBs. The Ah-level QSSBs with LiNi0.83Co0.11Mn0.06O2 cathode and graphite-silicon anode demonstrate significantly improved safety features without sacrificing electrochemical performance. As evidenced by accelerating rate calorimetry tests, the QSSBs exhibit increased self-heating temperature and onset temperature (T2), and decreased temperature rise rate during thermal runaway (TR). The T2 has a maximum increase of 48.4 °C compared to the conventional liquid batteries. Moreover, the QSSBs do not undergo TR until 180 °C (even 200 °C) during the hot-box tests, presenting significant improvement compared to the liquid batteries that run into TR at 130 °C. Systematic investigations show that the in situ formed polymer skeleton effectively mitigates the exothermic reactions between lithium salts and lithiated anode, retards the oxygen release from cathode, and inhibits crosstalk reactions between cathode and anode at elevated temperatures. The findings offer an innovative solution for practical high-safety QSSBs and open up a new sight for building safer high-energy-density batteries.

Side Reactions/Changes in Lithium-Ion Batteries: Mechanisms and Strategies for Creating Safer and Better Batteries.

Lithium-ion batteries (LIBs), in which lithium ions function as charge carriers, are considered the most competitive energy storage devices due to their high energy and power density. However, battery materials, especially with high capacity undergo side reactions and changes that result in capacity decay and safety issues. A deep understanding of the reactions that cause changes in the battery's internal components and the mechanisms of those reactions is needed to build safer and better batteries. This review focuses on the processes of battery failures, with voltage and temperature as the underlying factors. Voltage-induced failures result from anode interfacial reactions, current collector corrosion, cathode interfacial reactions, overcharge, and over-discharge, while temperature-induced failure mechanisms include SEI decomposition, separator damage, and interfacial reactions between electrodes and electrolytes. The review also presents protective strategies for controlling these reactions. As a result, the reader is offered a comprehensive overview of the safety features and failure mechanisms of various LIB components.

Comparison of pyrethroid resistance in adults and larvae of Culex pipiens pallens (Diptera: Culicidae) from four field populations in China.

The susceptibility of adults and larvae from four field populations of Culex pipiens pallens (Coguillett) (Diptera: Culicidae) in China to deltamethrin, beta-cypermethrin, and permethrin was investigated using the World Health Organization standard susceptibility test methods. One to 2 d old nonblood fed female mosquitoes emerged from pupae resulting from wild-caught larvae (F1 laboratory reared adults) were exposed to various doses of the pyrethroids. The larval bioassay was conducted using a range of concentrations to determine the LC50 values. Using allele-specific polymerase chain reaction, the frequency of the kdr resistance gene was determined in each population. The bioassay data indicated that deltamethrin was the most active larvicide in all four populations with resistance ratios (RR) of 1.6-3.9-fold. This was followed by beta-cypermethrin with RR of 1.1-3.3-fold, while larvae from three mosquito populations from Beijing, Jinan, and Kaifeng had developed resistance to permethrin with RR of 12.6-, 24.0-, and 18.8-fold, respectively. The overall RR of larvae for all insecticides in ascending order was Changchun < Beijing < Kaifeng < Jinan; and ranking of the adult mortality was Changchun < Jinan = Kaifeng < Beijing. For the three pyrethroids tested, the correlation coefficient among the three test methods on the four populations and one lab strain was quite weak. The R value was 0.113-0.320 when we compared kdr detection for kdr% with LC50, -0.565 to -0.793 when kdr% versus adult mortality test, and -0.750 to 0.505 for LC50 versus adult mortality. Permethrin showed the best correlation (R = -0.793) between kdr frequency and adult mortality. This indicates that levels of susceptibility changes to an insecticide should not be based on a single method of assessment.

Integrating UPLC-Q-Exactive Orbitrap/MS, network pharmacology and experimental validation to reveal the potential mechanism of Tibetan medicine Rhodiola granules in improving myocardial ischemia-reperfusion injury.

ETHNOPHARMACOLOGY RELEVANCE: Rhodiola granules (RG) is a traditional Tibetan medicine prescription that can be used to improve the symptoms of ischemia and hypoxia in cardiovascular and cerebrovascular diseases. However, there is no report on its use to improve myocardial ischemia/reperfusion (I/R) injury, and its potential active ingredients and mechanism against myocardial ischemia/reperfusion (I/R) injury remain unclear. AIM OF THE STUDY: This study aimed to reveal the potential bioactive components and underlying pharmacological mechanisms of RG in improving myocardial I/R injury through a comprehensive strategy. MATERIALS AND METHODS: UPLC-Q-Exactive Orbitrap/MS technology was used to analyze the chemical components of RG, the potential bioactive components and targets were tracked and predicted by the SwissADME and SwissTargetPrediction databases, and the core targets were predicted through the PPI network, as well the functions and pathways were determined by GO and KEGG analysis. In addition, the molecular docking and ligation of the anterior descending coronary artery-induced rat I/R models were experimentally validated. RESULTS: A total of 37 ingredients were detected from RG, including nine flavones, ten flavonoid glycosides, one glycoside, eight organic acids, four amides, two nucleosides, one amino acid, and two other components. Among them, 15 chemical components, such as salidroside, morin, diosmetin, and gallic acid were identified as key active compounds. Ten core targets, including AKT1, VEGF, PTGS2, and STAT3, were discovered through the analysis of the PPI network constructed from 124 common potential targets. These possible targets were involved in the regulation of oxidative stress and HIF-1/VEGF/PI3K-Akt signaling pathways. Furthermore, molecular docking confirmed that the potential bioactive compounds in RG have good potential binding abilities to AKT1, VEGFA, PTGS2, STAT3, and HIF-1α proteins. Then, the animal experiments showed that RG could significantly improve the cardiac function of I/R rats, reduce the size of myocardial infarction, improve the myocardial structure, and reduce the degree of myocardial fibrosis, inflammatory cell infiltration, and myocardial cell apoptosis rate in I/R rats. In addition, we also found that RG could decrease the concentration of AGE, Ox-LDL, MDA, MPO, XOD, SDH, Ca2+, and ROS, and increase the concentration of Trx, TrxR1, SOD, T-AOC, NO, ATP, Na+k+-ATPase, Ca2+-ATPase, and CCO. Moreover, RG could significantly down-regulate the expressions of Bax, Cleaved-caspase3, HIF-1α, and PTGS2, as well up-regulate the expressions of Bcl-2, VEGFA, p-AKT1, and p-STAT3. CONCLUSION: In summary, we revealed for the first time the potential active ingredients and mechanisms of RG for myocardial I/R injury therapy through a comprehensive research strategy. RG may synergistically improve myocardial I/R injury through anti-inflammatory, regulating energy metabolism, and oxidative stress, improving I/R-induced myocardial apoptosis, which may be related to the HIF-1/VEGF/PI3K-Akt signaling pathway. Our study provides new insights into the clinical application of RG and also provides a reference for the development and mechanism research of other Tibetan medicine compound preparations.

Enabling Electrochemical-Mechanical Robustness of Ultra-High Ni Cathode via Self-Supported Primary-Grain-Alignment Strategy.

The electrochemical-mechanical degradation of ultrahigh Ni cathode for lithium-ion batteries is a crucial aspect that limits the cycle life and safety of devices. Herein, the study reports a facile strategy involving rational design of primary grain crystallographic orientation within polycrystalline cathode, which well enhanced its electro-mechanical strength and Li+ transfer kinetics. Ex situ and in situ experiments/simulations including cross-sectional particle electron backscatter diffraction (EBSD), single-particle micro-compression, thermogravimetric analysis combined with mass spectrometry (TGA-MS), and finite element modeling reveal that, the primary-grain-alignment strategy effectively mitigates the particle pulverization, lattice oxygen release thereby enhances battery cycle life and safety. Besides the preexisting doping and coating methodologies to improve the stability of Ni-rich cathode, the primary-grain-alignment strategy, with no foreign elements or heterophase layers, is unprecedently proposed here. The results shed new light on the study of electrochemical-mechanical strain alleviation for electrode materials.

Synergistic effects of EP-1 and ivermectin mixture (iEP-1) to control rodents and their ectoparasites.

BACKGROUND: Ectoparasites of rodents play significant roles in disease transmission to humans. Conventional poisoning potentially reduces the population densities of rodents, however, they may increase the ectoparasite loads on the surviving hosts. EP-1 has been shown to have anti-fertility effects on many rodent species, while ivermectin is effective in controlling ectoparasites. In this study, we examined the combined effects of EP-1 and ivermectin mixture (iEP-1) baits on rodents and their corresponding flea/tick loads. RESULTS: In males, the weight of testis, epididymis, and seminiferous vesicle were reduced to less than 33%, 25%, and 17%, respectively, compared to the control group following administration of iEP-1 for 7 days. The weight of the uterus increased by approximately 75%. After 5 days of iEP-1 intake, all ticks were killed, whereas 94% of fleas on mice died after 3 days of bait intake. In the field test near Beijing, the flea index was reduced by more than 90% after 7 days of iEP-1 bait delivery. In a field test in Inner Mongolia, the weights of testis, epididymis, and seminiferous vesicle were significantly reduced by 27%, 32%, and 57%, respectively, 2 weeks after iEP-1 bait delivery. Approximately 36% rodents exhibited obvious uterine oedema accompanied by a weight increase of about 150%. The flea index was reduced by over 90%. CONCLUSION: Our results indicated that iEP-1 is a promising treatment for reducing the abundance of both small rodents and their ectoparasites; this will be effective for managing rodent damage and transmission of rodent-borne diseases associated with fleas and ticks. © 2022 Society of Chemical Industry.

Synergistic Dual-Salt Electrolyte for Safe and High-Voltage LiNi0.8Co0.1Mn0.1O2//Graphite Pouch Cells.

Concerns about thermal safety and unresolved high-voltage stability have impeded the commercialization of high-energy lithium-ion batteries bearing LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes. Enhancing the cathode structure and optimizing the electrolyte formula have demonstrated significant potential in improving the high-voltage properties of batteries while simultaneously minimizing thermal hazards. The current study reports the development of a high-voltage lithium-ion battery that is both safe and reliable, using single-crystal NCM811 and a dual-salt electrolyte (DSE). After 200 cycles at high voltage (up to 4.5 V), the capacity retention of the battery with DSE was 98.80%, while that for the battery with a traditional electrolyte was merely 86.14%. Additionally, in comparison to the traditional electrolyte, the DSE could raise the tipping temperature of a battery's thermal runaway (TR) by 31.1 °C and lower the maximum failure temperature by 76.1 °C. Moreover, the DSE could effectively reduce the battery's TR heat release rate (by 23.08%) as well as eliminate concerns relating to fire hazards (no fire during TR). Based on material characterization, the LiDFOB and LiBF4 salts were found to facilitate the in situ formation of an F- and B-rich cathode-electrolyte interphase, which aids in inhibiting oxygen and interfacial side reactions, thereby reducing the intensity of redox reactions within the battery. Therefore, the findings indicate that DSE is promising as a safe and high-voltage lithium-ion battery material.

Thermal-Switchable, Trifunctional Ceramic-Hydrogel Nanocomposites Enable Full-Lifecycle Security in Practical Battery Systems.

Thermal runaway (TR) failures of large-format lithium-ion battery systems related to fires and explosions have become a growing concern. Here, we design a smart ceramic-hydrogel nanocomposite that provides integrated thermal management, cooling, and fire insulation functionalities and enables full-lifecycle security. The glass-ceramic nanobelt sponges exhibit high mechanical flexibility with 80% reversible compressibility and high fatigue resistance, which can firmly couple with the polymer-nanoparticle hydrogels and form thermal-switchable nanocomposites. In the operating mode, the high enthalpy of the nanocomposites enables efficient thermal management, thereby preventing local temperature spikes and overheating under extremely fast charging conditions. In the case of mechanical or thermal abuse, the stored water can be immediately released, leaving behind a highly flexible ceramic matrix with low thermal conductivity (42 mW m-1 K-1 at 200 °C) and high-temperature resistance (up to 1300 °C), thus effectively cooling the TR battery and alleviating the devastating TR propagation. The versatility, self-adaptivity, environmental friendliness, and manufacturing scalability make this material highly attractive for practical safety assurance applications.

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries.

The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) is fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly shows that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating rate calorimetry tests reveal that the practical 1 Ah LiNi0.6 Co0.2 Mn0.2 O2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dtmax ) of only 3.7 °C s-1 compared to 131.6 °C s-1 in the case of Al2 O3 @PE macroporous separator. Moreover, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al2 O3 @PE separator at high temperature without sacrificing specific capacity and rate capability.

Thermal Runaway of Nonflammable Localized High-Concentration Electrolytes for Practical LiNi0.8 Mn0.1 Co0.1 O2 |Graphite-SiO Pouch Cells.

With continuous improvement of batteries in energy density, enhancing their safety is becoming increasingly urgent. Herein, practical high energy density LiNi0.8 Mn0.1 Co0.1 O2 |graphite-SiO pouch cell with nonflammable localized high concentration electrolyte (LHCE) is proposed that presents unique self-discharge characteristic before thermal runaway (TR), thus effectively reducing safety hazards. Compared with the reference electrolyte, pouch cell with nonflammable LHCE can increase self-generated heat temperature by 4.4 °C, increase TR triggering temperature by 47.3 °C, decrease the TR highest temperature by 71.8 °C, and extend the time from self-generated heat to triggering TR by ≈8 h. In addition, the cell with nonflammable LHCE presents superior high voltage cycle stability, attributed to the formation of robust inorganic-rich electrode-electrolyte interphase. The strategy represents a pivotal step forward for practical high energy and high safety batteries.

[Detecting the concentrations of bisphenol A (BPA) in air of workplaces with HPLC].

OBJECTIVE: To establish the method of detecting the concentrations of bisphenol A (BPA)in air of workplaces with high performance liquid chromatographic (HPLC). METHODS: According to standards of methods for determining the chemical substances in workplace air, BPA in the air was collected by glass fiber filter, then dissolved by acetonitrile and determined by high performance liquid chromatography with FLD. RESULTS: There was a linear relationship within the range of 0.01-10.0 pg /ml, and the detection limit was 0.005 pg/ml. The lowest detected concentration was 3.3x10-5 mg/m3. The relative standard deviation was 2.5-5.5%. The dissolution efficiencies were 95.0%-101.9% and the sampling efficiencies were 99.6%. The samples in glass fiber filter membrane could be stored for 7 days at room temperature. CONCLUSION: The present method could meet with the requirements of Guide for establishing occupational health standards-Part 4 Determination methods of air chemicals in workplace and be feasible for determination of BPA in workplace air.

Spatial Dynamics of Dengue Fever in Mainland China, 2019.

New spatial characteristics of dengue fever in mainland China during 2019 were analyzed. There was a dengue fever outbreak in mainland China in 2019, with 15,187 indigenous cases in 13 provinces, 1281 domestic imported cases from 12 provinces and 5778 overseas imported cases from 47 countries, more than the previous cases during the period 2005-2018, except for in 2014. Indigenous cases occurred in Sichuan, Hubei and Chongqing in 2019. There have been big changes in the spatial distribution and proportion of dengue cases. Indigenous cases were not only located in the southwestern border and southeastern coastal provinces of Yunnan, Guangdong, Guangxi and Fujian but also in the central provinces of Jiangxi and Chongqing. Domestic imported cases were not only from Guangdong, but also from Yunnan. There were five new sources of importation of cases. Overseas imported cases were mainly from Cambodia and Myanmar in 2019. Understanding the new spatial characteristics of dengue fever in China helps to formulate targeted, strategic plans and implement effective public health prevention and control measures.

Morphological and Molecular Identification of Tropical Bed Bugs From Two Cities of the Pearl River Delta in China.

From the 1960s to the 1980s, with the implementation of nationwide 'Four-Pest Elimination' campaigns (bed bugs, Cimex lectularius L. and Cimex hemipterus (F.) (Hemiptera: Cimicidae), were listed as one of the targeted pests), bed bug infestations were gradually eliminated in most provinces in China. However, during the last two decades, reports of bed bug infestations in the Pearl River Delta of China have shown an upward trend. Up to now, the bed bug species occurring in this area was much less frequently reported. In this study, we used both morphological and molecular methods to accurately identify the species of bed bugs collected from the cities of Guangzhou and Foshan, China. Results indicated that no significant difference was observed in the mean pronotum width-to-length ratio of Guangzhou (2.6) and Foshan (2.4) specimens; however, both were significantly lower than that of a laboratory strain C. lectularius (3.1). The genetic distances of our specimens with C. hemipterus and C. lectularius were 0-0.2% and 22.2-22.6%, respectively. On the basis of the morphological characteristics and mitochondrial DNA sequence data, it can be affirmed that bed bugs collected from Guangzhou and Foshan were C. hemipterus.

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode.

Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H2 was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.