Push-Pull Electrolyte Design Strategy Enables High-Voltage Low-Temperature Lithium Metal Batteries.

Lithium (Li) metal batteries hold significant promise in elevating energy density, yet their performance at ultralow temperatures remains constrained by sluggish charge transport kinetics and the formation of unstable interphases. In conventional electrolyte systems, lithium ions are tightly locked in the solvation structure, thereby engendering difficulty in the desolvation process and further exacerbating solvent decomposition. Herein, we propose a new push-pull electrolyte design strategy, utilizing molecular electrostatic potential (ESP) screening to identify 2,2-difluoroethyl trifluoromethanesulfonate (DTF) as an optimal cosolvent. Importantly, DTF exhibits a moderate ESP minimum (-21.0 kcal mol-1) to strike a balance between overly strong and overly weak Li ion affinity, which allows the sulfonyl group to effectively pull Li ions without disrupting the anion-rich solvation structure. Simultaneously, the difluoromethyl group, with a high ESP maximum (37.3 kcal mol-1), pushes solvent molecules via competitive hydrogen bonding. This design reconstructs existing solvation structures and expedites Li ion desolvation. Furthermore, fluorinated DTF demonstrates excellent stability at elevated voltage and facilitates the formation of robust inorganic-rich interphases. Impressively, rapid charge transfer kinetics can be achieved employing designed electrolyte, and the LiNi0.8Mn0.1Co0.1O2 (NMC811)||Li cells demonstrate excellent charge-discharge cycling stability with a high capacity exceeding 153 mAh g-1 even at -40 °C, retaining over 93% of initial capacity after 100 cycles under a 4.8 V charging cutoff. This work provides insights into the design of low-temperature electrolytes with a wide electrochemical window, advancing the development of batteries for extreme conditions.

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte.

LiCoO2 (LCO) cathode materials have attracted significant attention for its potential to provide higher energy density in current Lithium-ion batteries (LIBs). However, the structure and performance degradation are exacerbated by increasing voltage due to the catastrophic reaction between the applied electrolyte and delithiated LCO. The present study focuses on the construction of physically and chemically robust Mg-integrated cathode-electrolyte interface (MCEI) to address this issue, by incorporating Magnesium bis(trifluoromethanesulfonyl)imide (Mg[TFSI]2) as an electrolyte additive. During formation cycles, the strong MCEI is formed and maintained its 2 nm thickness throughout long-term cycling. Notably, Mg is detected not only in the robust MCEI, but also imbedded in the surface of the LCO lattice. As a result, the parasitic interfacial side reactions, surface phase reconstruction, particle cracking, Co dissolution and shuttling are considerably suppressed, resulting in long-term cycling stability of LCO up to 4.5 V. Therefore, benefit from the double protection of the strong MCEI, the Li||LCO coin cell and the Ah-level Graphite||LCO pouch cell exhibit high capacity retention by using Mg-electrolyte, which are 88.13% after 200 cycles and 90.4% after 300 cycles, respectively. This work provides a novel approach for the rational design of traditional electrolyte additives.

Effects of fluorinated solvents on electrolyte solvation structures and electrode/electrolyte interphases for lithium metal batteries.

Electrolyte is very critical to the performance of the high-voltage lithium (Li) metal battery (LMB), which is one of the most attractive candidates for the next-generation high-density energy-storage systems. Electrolyte formulation and structure determine the physical properties of the electrolytes and their interfacial chemistries on the electrode surfaces. Localized high-concentration electrolytes (LHCEs) outperform state-of-the-art carbonate electrolytes in many aspects in LMBs due to their unique solvation structures. Types of fluorinated cosolvents used in LHCEs are investigated here in searching for the most suitable diluent for high-concentration electrolytes (HCEs). Nonsolvating solvents (including fluorinated ethers, fluorinated borate, and fluorinated orthoformate) added in HCEs enable the formation of LHCEs with high-concentration solvation structures. However, low-solvating fluorinated carbonate will coordinate with Li+ ions and form a second solvation shell or a pseudo-LHCE which diminishes the benefits of LHCE. In addition, it is evident that the diluent has significant influence on the electrode/electrolyte interphases (EEIs) beyond retaining the high-concentration solvation structures. Diluent molecules surrounding the high-concentration clusters could accelerate or decelerate the anion decomposition through coparticipation of diluent decomposition in the EEI formation. The varied interphase features lead to significantly different battery performance. This study points out the importance of diluents and their synergetic effects with the conductive salt and the solvating solvent in designing LHCEs. These systematic comparisons and fundamental insights into LHCEs using different types of fluorinated solvents can guide further development of advanced electrolytes for high-voltage LMBs.

Long-Life All-Solid-State Batteries Enabled by Cold-Pressed Garnet Composite Electrolytes with Enhanced Li+ Conduction.

Garnet Li7La3Zr2O12 (LLZO)-based solid-state electrolytes (SSEs) hold promise for realizing next-generation lithium metal batteries with high energy density. However, the high stiffness of high-temperature sintered LLZO makes it brittle and susceptible to strain during the fabrication of solid-state batteries. Cold-pressed LLZO exhibits improved ductility but suffers from insufficient Li+ conductivity. Here, we report cold-pressed Ta-doped LLZO (Ta-LZ) particles integrated with ductile Li6PS5Cl (LPSC) via a Li+ conductive Li-containing Ta-Cl structure. This configuration creates a continuous Li+ conduction network by enhancing the Li+ exchange at the Ta-LZ/LPSC interface. The resulting Ta-LZ/LPSC SSE exhibits Li+ conductivity of 4.42 × 10-4 S cm-1 and a low activation energy of 0.31 eV. Li symmetric cells with Ta-LZ/LPSC SSE demonstrate excellent Li dendrite suppression ability, with an improved critical current density of 5.0 mA cm-2 and a prolonged cycle life exceeding 600 h at 1 mA cm-2. Our finding provides valuable insights into developing cold-pressed ceramic powder electrolytes for high-performance all-solid-state batteries.

Selective Methylation of Cyclic Ether Towards Highly Elastic Solid Electrolyte Interphase for Silicon-based Anodes.

Silicon (Si)-based anodes offer high theoretical capacity for lithium-ion batteries but suffer from severe volume changes and continuous solid electrolyte interphase (SEI) degradation. Here, we address these challenges by selective methylation of 1,3-dioxolane (DOL), thus shifting the unstable bulk polymerization to controlled interfacial reactions and resulting in a highly elastic SEI. Comparative studies of 2-methyl-1,3-dioxolane (2MDOL) and 4-methyl-1,3-dioxolane (4MDOL) reveal that 4MDOL, with its larger ring strain and more stable radical intermediates due to hyperconjugation effect, promotes the formation of high-molecular-weight polymeric species at the electrode-electrolyte interface. This elastic, polymer-rich SEI effectively accommodates volume changes of Si and inhibits continuous side reactions. Our designed electrolyte enables Si-based anode to achieve 85.4% capacity retention after 400 cycles at 0.5 C without additives, significantly outperforming conventional carbonate-based electrolytes. Full cells also demonstrate stable long-term cycling. This work provides new insights into molecular-level electrolyte design for high-performance Si anodes, offering a promising pathway toward next-generation lithium-ion batteries with enhanced energy density and longevity.

Localized Alkaline Environment via In Situ Electrostatic Confinement for Enhanced CO2-to-Ethylene Conversion in Neutral Medium.

Electrocatalytic CO2 reduction reaction (CO2RR) is one of the most promising routes to facilitate carbon neutrality. An alkaline electrolyte is typically needed to promote the production of valuable multi-carbon molecules (such as ethylene). However, the reaction between CO2 and OH- consumes a significant quantity of CO2/alkali and causes the rapid decay of CO2RR selectivity and stability. Here, we design a catalyst-electrolyte interface with an effective electrostatic confinement of in situ generated OH- to improve ethylene electrosynthesis from CO2 in neutral medium. In situ Raman measurements indicate the direct correlation between ethylene selectivity and the intensities of surface Cu-CO and Cu-OH species, suggesting the promoted C-C coupling with the surface enrichment of OH-. Thus, we report a CO2-to-ethylene Faradaic efficiency (FE) of 70% and a partial current density of 350 mA cm-2 at -0.89 V vs the reversible hydrogen electrode. Furthermore, the system demonstrated a 50 h stable operation at 300 mA cm-2 with an average ethylene FE of ∼68%. This study offers a universal strategy to tune the reaction micro-environment, and a significantly improved ethylene FE of 64.5% was obtained even in acidic electrolytes (pH = 2).

Role of inner solvation sheath within salt-solvent complexes in tailoring electrode/electrolyte interphases for lithium metal batteries.

Functional electrolyte is the key to stabilize the highly reductive lithium (Li) metal anode and the high-voltage cathode for long-life, high-energy-density rechargeable Li metal batteries (LMBs). However, fundamental mechanisms on the interactions between reactive electrodes and electrolytes are still not well understood. Recently localized high-concentration electrolytes (LHCEs) are emerging as a promising electrolyte design strategy for LMBs. Here, we use LHCEs as an ideal platform to investigate the fundamental correlation between the reactive characteristics of the inner solvation sheath on electrode surfaces due to their unique solvation structures. The effects of a series of LHCEs with model electrolyte solvents (carbonate, sulfone, phosphate, and ether) on the stability of high-voltage LMBs are systematically studied. The stabilities of electrodes in different LHCEs indicate the intrinsic synergistic effects between the salt and the solvent when they coexist on electrode surfaces. Experimental and theoretical analyses reveal an intriguing general rule that the strong interactions between the salt and the solvent in the inner solvation sheath promote their intermolecular proton/charge transfer reactions, which dictates the properties of the electrode/electrolyte interphases and thus the battery performances.

Unveiling the Critical Role of Ion Coordination Configuration of Ether Electrolytes for High Voltage Lithium Metal Batteries.

Albeit ethers are favorable electrolyte solvents for lithium (Li) metal anode, their inferior oxidation stability (<4.0 V vs. Li/Li+ ) is problematic for high-voltage cathodes. Studies of ether electrolytes have been focusing on the archetype glyme structure with ethylene oxide moieties. Herein, we unveil the crucial effect of ion coordination configuration on oxidation stability by varying the ether backbone structure. The designed 1,3-dimethoxypropane (DMP, C3) forms a unique six-membered chelating complex with Li+ , whose stronger solvating ability suppresses oxidation side reactions. In addition, the favored hydrogen transfer reaction between C3 and anion induces a dramatic enrichment of LiF (a total atomic ratio of 76.7 %) on the cathode surface. As a result, the C3-based electrolyte enables greatly improved cycling of nickel-rich cathodes under 4.7 V. This study offers fundamental insights into rational electrolyte design for developing high-energy-density batteries.

Regulating Frozen Electrolyte Structure with Colloidal Dispersion for Low Temperature Aqueous Batteries.

Electrolyte freezing under low temperatures is a critical challenge for the development of aqueous batteries (ABs). While lowering the freezing point of the electrolyte has caught major research efforts, limited attention has been paid to the structural evolution during the electrolyte freezing process and regulating the frozen electrolyte structure for low temperature ABs. Here, we reveal the formation process of interconnected liquid regions for ion transport in frozen electrolytes with various in situ variable-temperature technologies. More importantly, the low-temperature performance of ABs was significantly improved with the colloidal electrolyte design using graphene oxide quantum dots (GOQDs), which effectively inhibits the growth of ice crystals and expands the interconnected liquid regions for facial ion transport. This work provides new insights and a promising strategy for the electrolyte design of low-temperature ABs.

Intrinsic Nonflammable Ether Electrolytes for Ultrahigh-Voltage Lithium Metal Batteries Enabled by Chlorine Functionality.

The issues of inherent low anodic stability and high flammability hinder the deployment of the ether-based electrolytes in practical high-voltage lithium metal batteries. Here, we report a rationally designed ether-based electrolyte with chlorine functionality on ether molecular structure to address these critical challenges. The chloroether-based electrolyte demonstrates a high Li Coulombic efficiency of 99.2 % and a high capacity retention >88 % over 200 cycles for Ni-rich cathodes at an ultrahigh cut-off voltage of 4.6 V (stable even up to 4.7 V). The chloroether-based electrolyte not only greatly improves electrochemical stabilities of Ni-rich cathodes under ultrahigh voltages with interphases riched in LiF and LiCl, but possesses the intrinsic nonflammable safety feature owing to the flame-retarding ability of chlorine functional groups. This study offers a new approach to enable ether-based electrolytes for high energy density, long-life and safe Li metal batteries.

Glassy Li metal anode for high-performance rechargeable Li batteries.

Lithium metal has been considered an ideal anode for high-energy rechargeable Li batteries, although its nucleation and growth process remains mysterious, especially at the nanoscale. Here, cryogenic transmission electron microscopy was used to reveal the evolving nanostructure of Li metal deposits at various transient states in the nucleation and growth process, in which a disorder-order phase transition was observed as a function of current density and deposition time. The atomic interaction over wide spatial and temporal scales was depicted by reactive molecular dynamics simulations to assist in understanding the kinetics. Compared to crystalline Li, glassy Li outperforms in electrochemical reversibility, and it has a desired structure for high-energy rechargeable Li batteries. Our findings correlate the crystallinity of the nuclei with the subsequent growth of the nanostructure and morphology, and provide strategies to control and shape the mesostructure of Li metal to achieve high performance in rechargeable Li batteries.

Magnetohydrodynamic Interface-Rearranged Lithium Ions Distribution for Uniform Lithium Deposition and Stable Lithium Metal Anode.

Uneven lithium (Li) electrodeposition hinders the wide application of high-energy-density Li metal batteries (LMBs). Current efforts mainly focus on the side-reaction suppression between Li and electrolyte, neglecting the determinant factor of mass transport in affecting Li deposition. Herein, guided Li+ mass transport under the action of a local electric field near magnetic nanoparticles or structures at the Li metal interface, known as the magnetohydrodynamic (MHD) effect, are proposed to promote uniform Li deposition. The modified Li+ trajectories are revealed by COMSOL Multiphysics simulations, and verified by the compact and disc-like Li depositions on a model Fe3 O4 substrate. Furthermore, a patterned mesh with the magnetic Fe-Cr2 O3 core-shell skeleton is used as a facile and efficient protective structure for Li metal anodes, enabling Li metal batteries to achieve a Coulombic efficiency of 99.5 % over 300 cycles at a high cathode loading of 5.0 mAh cm-2 . The Li protection strategy based on the MHD interface design might open a new opportunity to develop high-energy-density LMBs.

Electrolyte Solvation Manipulation Enables Unprecedented Room-Temperature Calcium-Metal Batteries.

Calcium-metal batteries (CMBs) provide a promising option for high-energy and cost-effective energy-storage technology beyond the current state-of-the-art lithium-ion batteries. Nevertheless, the development of room-temperature CMBs is significantly impeded by the poor reversibility and short lifespan of the calcium-metal anode. A solvation manipulation strategy is reported to improve the plating/stripping reversibility of calcium-metal anodes by enhancing the desolvation kinetics of calcium ions in the electrolyte. The introduction of lithium salt changes the electrolyte structure considerably by reducing coordination number of calcium ions in the first solvation shell. As a result, an unprecedented Coulombic efficiency of up to 99.1 % is achieved for galvanostatic plating/stripping of the calcium-metal anode, accompanied by a very stable long-term cycling performance over 200 cycles at room temperature. This work may open up new opportunities for development of practical CMBs.

Potassium Superoxide: A Unique Alternative for Metal-Air Batteries.

Lithium-oxygen (Li-O2) batteries have been envisaged and pursued as the long-term successor to Li-ion batteries, due to the highest theoretical energy density among all known battery chemistries. However, their practical application is hindered by low energy efficiency, sluggish kinetics, and a reliance on catalysts for the oxygen reduction and evolution reactions (ORR/OER). In a superoxide battery, oxygen is also used as the cathodic active medium but is reduced only to superoxide (O2•-), the anion formed by adding an electron to a diatomic oxygen molecule. Therefore, O2/O2•- is a unique single-electron ORR/OER process. Since the introduction of K-O2 batteries by our group in 2013, superoxide batteries based on potassium superoxide (KO2) have attracted increasing interest as promising energy storage devices due to their significantly lower overpotentials and costs. We have selected potassium for building the superoxide battery because it is the lightest alkali metal cation to form the thermodynamically stable superoxide (KO2) product. This allows the battery to operate through the proposed facile one-electron redox process of O2/KO2. This strategy provides an elegant solution to the long-lasting kinetic challenge of ORR/OER in metal-oxygen batteries without using any electrocatalysts. Over the past five years, we have been focused on understanding the electrolyte chemistry, especially at the electrode/electrolyte interphase, and the electrolyte's stability in the presence of potassium metal and superoxide. In this Account, we examine our advances and understanding of the chemistry in superoxide batteries, with an emphasis on our systematic investigation of K-O2 batteries. We first introduce the K metal anode electrochemistry and its corrosion induced by electrolyte decomposition and oxygen crossover. Tuning the electrolyte composition to form a stable solid electrolyte interphase (SEI) is demonstrated to alleviate electrolyte decomposition and O2 cross-talk. We also analyze the nucleation and growth of KO2 in the oxygen electrode, as well its long-term stability. The electrochemical growth of KO2 on the cathode is correlated with the rate performance and capacity. Increasing the surface area and reducing the O2 diffusion pathway are identified as critical strategies to improve the rate performance and capacity. Li-O2 and Na-O2 batteries are further compared with the K-O2 chemistry regarding their pros and cons. Because only KO2 is thermodynamically stable at room temperature, K-O2 batteries offer reversible cathode reactions over the long-term while the counterparts undergo disproportionation. The parasitic reactions due to the reactivity of superoxide are discussed. With the trace side products quantified, the overall superoxide electrochemistry is highly reversible with an extended shelf life. Lastly, potential anode substitutes for K-O2 batteries are reviewed, including the K3Sb alloy and liquid Na-K alloy. We conclude with perspectives on the future development of the K metal anode interface, as well as the electrolyte and cathode materials to enable improved reversibility and maximized power capability. We hope this Account promotes further endeavors into the development of the K-O2 chemistry and related material technologies for superoxide battery research.

Direct interactions of OCA-B and TFII-I regulate immunoglobulin heavy-chain gene transcription by facilitating enhancer-promoter communication.

B cell-specific coactivator OCA-B, together with Oct-1/2, binds to octamer sites in promoters and enhancers to activate transcription of immunoglobulin (Ig) genes, although the mechanisms underlying their roles in enhancer-promoter communication are unknown. Here, we demonstrate a direct interaction of OCA-B with transcription factor TFII-I, which binds to DICE elements in Igh promoters, that affects transcription at two levels. First, OCA-B relieves HDAC3-mediated Igh promoter repression by competing with HDAC3 for binding to promoter-bound TFII-I. Second, and most importantly, Igh 3' enhancer-bound OCA-B and promoter-bound TFII-I mediate promoter-enhancer interactions, in both cis and trans, that are important for Igh transcription. These and other results reveal an important function for OCA-B in Igh 3' enhancer function in vivo and strongly favor an enhancer mechanism involving looping and facilitated factor recruitment rather than a tracking mechanism.

Concentrated Electrolyte for the Sodium-Oxygen Battery: Solvation Structure and Improved Cycle Life.

Alkali metal-oxygen batteries are of great interests for energy storage because of their unparalleled theoretical energy densities. Particularly attractive is the emerging Na-O2 battery because of the formation of superoxide as the discharge product. Dimethyl sulfoxide (DMSO) is a promising solvent for this battery but its instability towards Na makes it impractical in the Na-O2 battery. Herein we report the enhanced stability of Na in DMSO solutions containing concentrated sodium trifluoromethanesulfonimide (NaTFSI) salts (>3 mol kg-1 ). Raman spectra of NaTFSI/DMSO electrolytes and ab initio molecular dynamics simulation reveal the Na+ solvation number in DMSO and the formation of Na(DMSO)3 (TFSI)-like solvation structure. The majority of DMSO molecules solvating Na+ in concentrated solutions reduces the available free DMSO molecules that can react with Na and renders the TFSI anion decomposition, which protects Na from reacting with the electrolyte. Using these concentrated electrolytes, Na-O2 batteries can be cycled forming sodium superoxide (NaO2 ) as the sole discharge product with improved long cycle life, highlighting the beneficial role of concentrated electrolytes for Na-based batteries.

Aqueous Lithium-Iodine Solar Flow Battery for the Simultaneous Conversion and Storage of Solar Energy.

Integrating both photoelectric-conversion and energy-storage functions into one device allows for the more efficient solar energy usage. Here we demonstrate the concept of an aqueous lithium-iodine (Li-I) solar flow battery (SFB) by incorporation of a built-in dye-sensitized TiO2 photoelectrode in a Li-I redox flow battery via linkage of an I3(-)/I(-) based catholyte, for the simultaneous conversion and storage of solar energy. During the photoassisted charging process, I(-) ions are photoelectrochemically oxidized to I3(-), harvesting solar energy and storing it as chemical energy. The Li-I SFB can be charged at a voltage of 2.90 V under 1 sun AM 1.5 illumination, which is lower than its discharging voltage of 3.30 V. The charging voltage reduction translates to energy savings of close to 20% compared to conventional Li-I batteries. This concept also serves as a guiding design that can be extended to other metal-redox flow battery systems.

Dimeric [Mo2 S12 ](2-) Cluster: A Molecular Analogue of MoS2 Edges for Superior Hydrogen-Evolution Electrocatalysis.

Proton reduction is one of the most fundamental and important reactions in nature. MoS2 edges have been identified as the active sites for hydrogen evolution reaction (HER) electrocatalysis. Designing molecular mimics of MoS2 edge sites is an attractive strategy to understand the underlying catalytic mechanism of different edge sites and improve their activities. Herein we report a dimeric molecular analogue [Mo2 S12 ](2-) , as the smallest unit possessing both the terminal and bridging disulfide ligands. Our electrochemical tests show that [Mo2 S12 ](2-) is a superior heterogeneous HER catalyst under acidic conditions. Computations suggest that the bridging disulfide ligand of [Mo2 S12 ](2-) exhibits a hydrogen adsorption free energy near zero (-0.05 eV). This work helps shed light on the rational design of HER catalysts and biomimetics of hydrogen-evolving enzymes.

Lithiophilic and Eco-Friendly Nano-Se Seeds Unlock Dendrite-Free and Anode-Free Li-Metal Batteries.

A 3D host design for lithium (Li)-metal anodes can effectively accommodate volume changes and suppress Li dendrite growth; nonetheless, its practical applicability in energy-dense Li-metal batteries (LMBs) is plagued by excessive Li loading. Herein, we introduced eco- and human-friendly Se seeds into 3D carbon cloth (CC) to create a robust host for efficient Li deposition/stripping. The highly lithiophilic nano-Se endowed the Se-decorated CC (Se@CC) with perfect Li wettability for instantaneous Li infusion. At an optimal Li loading of 17 mg, the electrode delivered an unprecedentedly long life span of 5400 h with low overpotentials <36 mV at 1 mA cm-2/1 mAh cm-2 and 1500 h at 5 mA cm-2/5 mAh cm-2. Furthermore, the uniform Se distribution and strong Li-Se binding allowed for further reduction in Li loading to 2 mg via direct Li electrodeposition. The corresponding LiNi0.8Co0.1Mn0.1O2 (NCM811)-based full cell afforded a high capacity retention rate of 74.67% over 300 cycles at a low N/P ratio of 8.64. Finally, the initial anode-free LMB using a NCM811 cathode and a Se@CC anode current collector demonstrated a high electrode-level specific energy of 531 Wh kg-1 and consistently high CEs >99.7% over 200 cycles. This work highlights a high-performance host design with excellent tunability for practical high-energy-density LMBs.

Strategies for overcoming challenges in selective electrochemical CO2 conversion to ethanol.

The electrochemical conversion of carbon dioxide (CO2) to valuable chemicals is gaining significant attention as a pragmatic solution for achieving carbon neutrality and storing renewable energy in a usable form. Recent research increasingly focuses on designing electrocatalysts that specifically convert CO2 into ethanol, a desirable product due to its high-energy density, ease of storage, and portability. However, achieving high-efficiency ethanol production remains a challenge compared to ethylene (a competing product with a similar electron configuration). Existing electrocatalytic systems often suffer from limitations such as low energy efficiency, poor stability, and inadequate selectivity toward ethanol. Inspired by recent progress in the field, this review explores fundamental principles and material advancements in CO2 electroreduction, emphasizing strategies for ethanol production over ethylene. We discuss electrocatalyst design, reaction mechanisms, challenges, and future research directions. These advancements aim to bridge the gap between current research and industrialized applications of this technology.