Surface Passivation of GaN Nanowires for Enhanced Photoelectrochemical Water-Splitting.

Hydrogen production via photoelectrochemical water-splitting is a key source of clean and sustainable energy. The use of one-dimensional nanostructures as photoelectrodes is desirable for photoelectrochemical water-splitting applications due to the ultralarge surface areas, lateral carrier extraction schemes, and superior light-harvesting capabilities. However, the unavoidable surface states of nanostructured materials create additional charge carrier trapping centers and energy barriers at the semiconductor-electrolyte interface, which severely reduce the solar-to-hydrogen conversion efficiency. In this work, we address the issue of surface states in GaN nanowire photoelectrodes by employing a simple and low-cost surface treatment method, which utilizes an organic thiol compound (i.e., 1,2-ethanedithiol). The surface-treated photocathode showed an enhanced photocurrent density of -31 mA/cm2 at -0.2 V versus RHE with an incident photon-to-current conversion efficiency of 18.3%, whereas untreated nanowires yielded only 8.1% efficiency. Furthermore, the surface passivation provides enhanced photoelectrochemical stability as surface-treated nanowires retained ∼80% of their initial photocurrent value and produced 8000 µmol of gas molecules over 55 h at acidic conditions (pH ∼ 0), whereas the untreated nanowires demonstrated only <4 h of photoelectrochemical stability. These findings shed new light on the importance of surface passivation of nanostructured photoelectrodes for photoelectrochemical applications.

4-Gbit/s visible light communication link based on 16-QAM OFDM transmission over remote phosphor-film converted white light by using blue laser diode.

Visible Light Communication (VLC) as a new technology for ultrahigh-speed communication is still limited when using slow modulation light-emitting diode (LED). Alternatively, we present a 4-Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing. By changing the composition and the optical-configuration of a remote phosphor-film the generated white light is tuned from cool day to neutral, and the bit error rate is optimized from 1.9 × 10(-2) to 2.8 × 10(-5) in a blue filter-free link due to enhanced blue light transmission in forward direction. Briefly, blue-LD is an alternative to LED for generating white light and boosting the data rate of VLC.

Halide Perovskites: A New Era of Solution-Processed Electronics.

Organic-inorganic mixed halide perovskites have emerged as an excellent class of materials with a unique combination of optoelectronic properties, suitable for a plethora of applications ranging from solar cells to light-emitting diodes and photoelectrochemical devices. Recent works have showcased hybrid perovskites for electronic applications through improvements in materials design, processing, and device stability. Herein, a comprehensive up-to-date review is presented on hybrid perovskite electronics with a focus on transistors and memories. These applications are supported by the fundamental material properties of hybrid perovskite semiconductors such as tunable bandgap, ambipolar charge transport, reasonable mobility, defect characteristics, and solution processability, which are highlighted first. Then, recent progresses on perovskite-based transistors are reviewed, covering aspects of fabrication process, patterning techniques, contact engineering, 2D versus 3D material selection, and device performance. Furthermore, applications of perovskites in nonvolatile memories and artificial synaptic devices are presented. The ambient instability of hybrid perovskites and the strategies to tackle this bottleneck are also discussed. Finally, an outlook and opportunities to develop perovskite-based electronics as a competitive and feasible technology are highlighted.

Giant Ferroelectric Resistance Switching Controlled by a Modulatory Terminal for Low-Power Neuromorphic In-Memory Computing.

Ferroelectrics have been demonstrated as excellent building blocks for high-performance nonvolatile memories, including memristors, which play critical roles in the hardware implementation of artificial synapses and in-memory computing. Here, it is reported that the emerging van der Waals ferroelectric α-In2 Se3 can be used to successfully implement heterosynaptic plasticity (a fundamental but rarely emulated synaptic form) and achieve a resistance-switching ratio of heterosynaptic memristors above 103 , which is two orders of magnitude larger than that in other similar devices. The polarization change of ferroelectric α-In2 Se3 channel is responsible for the resistance switching at various paired terminals. The third terminal of α-In2 Se3 memristors exhibits nonvolatile control over channel current at a picoampere level, endowing the devices with picojoule read-energy consumption to emulate the associative heterosynaptic learning. The simulation proves that both supervised and unsupervised learning manners can be implemented in α-In2 Se3 neutral networks with high image recognition accuracy. Moreover, these heterosynaptic devices can naturally realize Boolean logic without an additional circuit component. The results suggest that van der Waals ferroelectrics hold great potential for applications in complex, energy-efficient, brain-inspired computing systems and logic-in-memory computers.

Gate-Tunable and Multidirection-Switchable Memristive Phenomena in a Van Der Waals Ferroelectric.

Memristive devices have been extensively demonstrated for applications in nonvolatile memory, computer logic, and biological synapses. Precise control of the conducting paths associated with the resistance switching in memristive devices is critical for optimizing their performances including ON/OFF ratios. Here, gate tunability and multidirectional switching can be implemented in memristors for modulating the conducting paths using hexagonal α-In2 Se3 , a semiconducting van der Waals ferroelectric material. The planar memristor based on in-plane (IP) polarization of α-In2 Se3 exhibits a pronounced switchable photocurrent, as well as gate tunability of the channel conductance, ferroelectric polarization, and resistance-switching ratio. The integration of vertical α-In2 Se3 memristors based on out-of-plane (OOP) polarization is demonstrated with a device density of 7.1 × 109 in.-2 and a resistance-switching ratio of well over 103 . A multidirectionally operated α-In2 Se3 memristor is also proposed, enabling the control of the OOP (or IP) resistance state directly by an IP (or OOP) programming pulse, which has not been achieved in other reported memristors. The remarkable behavior and diverse functionalities of these ferroelectric α-In2 Se3 memristors suggest opportunities for future logic circuits and complex neuromorphic computing.

Orthogonal Lithography for Halide Perovskite Optoelectronic Nanodevices.

3D organic-inorganic hybrid halide perovskites have attracted great interest due to their impressive optoelectronic properties. Recently, the emergence of 2D layered hybrid perovskites, with their excellent and tunable optoelectronic behavior, has encouraged researchers to develop the next generation of optoelectronics based on these 2D materials. However, device fabrication methods of scalable patterning on both types of hybrid perovskites are still lacking as these materials are readily damaged by the organic solvents in standard lithographic processes. We conceived the orthogonal processing and patterning method: Chlorobenzene and hexane, which are orthogonal to hybrid perovskites, are utilized in modified electron beam lithography (EBL) processes to fabricate perovskite-based devices without compromising their electronic or optical characteristics. As a proof-of-concept, we used the orthogonal EBL technique to fabricate a 2D layered single-crystal (C6H5C2H4NH3)2PbI4 photodetector featuring nanoscale patterned electrodes and superior photodetection ability with responsivity of 5.4 mA/W and detectivity of 1.07 × 1013 cm Hz1/2/W. Such orthogonal processing and patterning methods are believed to fully enable the high-resolution, high-throughput fabrication of complex perovskite-based electronics in the near future.

Resonance-Enhanced Absorption in Hollow Nanoshell Spheres with Omnidirectional Detection and High Responsivity and Speed.

Optical resonance formed inside a nanocavity resonator can trap light within the active region and hence enhance light absorption, effectively boosting device or material performance in applications of solar cells, photodetectors (PDs), and photocatalysts. Complementing conventional circular and spherical structures, a new type of multishelled spherical resonant strategy is presented. Due to the resonance-enhanced absorption by multiple convex shells, ZnO nanoshell PDs show improved optoelectronic performance and omnidirectional detection of light at different incidence angles and polarization. In addition, the response and recovery speeds of these devices are improved (0.8 and 0.7 ms, respectively) up to three orders of magnitude faster than in previous reports because of the existence of junction barriers between the nanoshells. The general design principles behind these hollow ZnO nanoshells pave a new way to improve the performance of sophisticated nanophotonic devices.

Layer-edge device of two-dimensional hybrid perovskites.

Two dimensional layered organic-inorganic hybrid perovskites (2D perovskites) are potential candidates for next generation photovoltaic device. Especially, the out-of-plane surface perpendicular to the superlattice plane of 2D perovskites (layer-edge surface) has presented several exotic behaviors, such as layer-edge states which are found to be crucial for improving the efficiency of 2D perovskite solar cells. However, fundamental research on transport properties of layer-edge surface is still absent. In this report, we observe the electronic and opto-electronic behavior in layer-edge device of 2D perovskites. The dark and photo currents are demonstrated to strongly depend on the crystallographic orientation in layer-edge device, and such anisotropic properties, together with photo response, are related to the thickness of inorganic layers. Finally, due to the abundant hydroxyl groups, water molecules are easy to condense on the layer-edge surface, and the conductance is extremely sensitive to the humidity environment, indicating a potential application of humidity sensor.

Single Atomically Sharp Lateral Monolayer p-n Heterojunction Solar Cells with Extraordinarily High Power Conversion Efficiency.

The recent development of 2D monolayer lateral semiconductor has created new paradigm to develop p-n heterojunctions. Albeit, the growth methods of these heterostructures typically result in alloy structures at the interface, limiting the development for high-efficiency photovoltaic (PV) devices. Here, the PV properties of sequentially grown alloy-free 2D monolayer WSe2 -MoS2 lateral p-n heterojunction are explores. The PV devices show an extraordinary power conversion efficiency of 2.56% under AM 1.5G illumination. The large surface active area enables the full exposure of the depletion region, leading to excellent omnidirectional light harvesting characteristic with only 5% reduction of efficiency at incident angles up to 75°. Modeling studies demonstrate the PV devices comply with typical principles, increasing the feasibility for further development. Furthermore, the appropriate electrode-spacing design can lead to environment-independent PV properties. These robust PV properties deriving from the atomically sharp lateral p-n interface can help develop the next-generation photovoltaics.

Surface effects in metal oxide-based nanodevices.

As devices shrink to the nanoscale, surface-to-volume ratio increases and the surface-environment interaction becomes a major factor for affecting device performance. The variation of electronic properties, including the surface band bending, gas chemisorption or photodesorption, native surface defects, and surface roughness, is called "surface effects". Such effects are ambiguous because they can be either negative or beneficial effects, depending on the environmental conditions and device application. This review provides an introduction to the surface effects on different types of nanodevices, offering the solutions to respond to their benefits and negative effects and provides an outlook on further applications regarding the surface effect. This review is beneficial for designing nano-enabled photodetectors, harsh electronics, memories, sensors and transistors via surface engineering.

Probing surface band bending of surface-engineered metal oxide nanowires.

We in situ probed the surface band bending (SBB) by ultraviolet photoelectron spectroscopy (UPS) in conjunction with field-effect transistor measurements on the incompletely depleted ZnO nanowires (NWs). The diameter range of the NWs is ca. 150-350 nm. Several surface treatments (i.e., heat treatments and Au nanoparticle (NP) decoration) were conducted to assess the impact of the oxygen adsorbates on the SBB. A 100 °C heat treatment leads to the decrease of the SBB to 0.74 ± 0.15 eV with 29.9 ± 3.0 nm width, which is attributed to the removal of most adsorbed oxygen molecules from the ZnO NW surfaces. The SBB of the oxygen-adsorbed ZnO NWs is measured to be 1.53 ± 0.15 eV with 43.2 ± 2.0 nm width. The attachment of Au NPs to the NW surface causes unusually high SBB (2.34 ± 0.15 eV with the wide width of 53.3 ± 1.6 nm) by creating open-circuit nano-Schottky junctions and catalytically enhancing the formation of the charge O(2) adsorbates. These surface-related phenomena should be generic to all metal oxide nanostructures. Our study is greatly beneficial for the NW-based device design of sensor and optoelectronic applications via surface engineering.