Assessment of Mobilization Potential of Per- and Polyfluoroalkyl Substances for Soil Remediation.

This study investigated the mobilization of a wide range of per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foams (AFFFs) in water-saturated soils through one-dimensional (1-D) column experiments with a view to assessing the feasibility of their remediation by soil desorption and washing. Results indicated that sorption/desorption of most of the shorter-carbon-chain PFASs (C ≤ 6) in soil reached greater than 99% rapidly─after approximately two pore volumes (PVs) and were well predicted by an equilibrium transport model, indicating that they will be readily removed by soil washing technologies. In contrast, the equilibrium model failed to predict the mobilization of longer-chain PFASs (C ≥ 7), indicating the presence of nonequilibrium sorption/desorption (confirmed by a flow interruption experiment). The actual time taken to attain 99% sorption/desorption was up to 5 times longer than predicted by the equilibrium model (e.g., ∼62 PVs versus ∼12 PVs predicted for perfluorooctane sulfonate (PFOS) in loamy sand). The increasing contribution of hydrophobic interactions over the electrostatic interactions is suggested as the main driving factor of the nonequilibrium processes. The inverse linear relationship (R2 = 0.6, p < 0.0001) between the nonequilibrium mass transfer rate coefficient and the Freundlich sorption coefficient could potentially be a useful means for preliminary evaluation of potential nonequilibrium sorption/desorption of PFASs in soils.

A review of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane in the environment and assessment of its persistence, bioaccumulation and toxicity.

Following the ban of many historically-used flame retardants (FRs), numerous replacement chemicals have been produced and used in products, with some being identified as environmental contaminants. One of these replacement flame retardants is 1,2-dibromo-4-(1,2-dibromoethyl)-cyclohexane (DBE-DBCH; formerly abbreviated as TBECH), which to date has not been identified for risk assessment and potential regulation. DBE-DBCH technical mixtures consist largely of α- and ß-diastereomers with trace amounts of γ- and δ-DBE-DBCH. The α- and ß-isomers are known contaminants in various environmental media. While current global use and production volumes of DBE-DBCH are unknown, recent studies identified that DBE-DBCH concentrations were among the highest of the measured bromine-based FRs in indoor and urban air in Europe. Yet our mass balance fugacity model and modeling of the physical-chemical properties of DBE-DBCH estimated only 1% partitioning to air with a half-life of 2.2 d atmospherically. In contrast, our modeling characterized DBE-DBCH adsorbing strongly to suspended particulates in the water column (~12%), settling onto sediment (2.5%) with minimal volatilization, but with most partitioning and adsorbing strongly to soil (~85%) with negligible volatilization and slow biodegradation. Our modeling further predicted that organisms would be exposed to DBE-DBCH through partitioning from the dissolved aquatic phase, soil, and by diet, and given its estimated logKow (5.24) and a half-life of 1.7 d in fish, DBE-DBCH is expected to bioaccumulate into lipophilic tissues. Low concentrations of DBE-DBCH are commonly measured in biota and humans, possibly because evidence suggests rapid metabolism. Yet toxicological effects are evident at low exposure concentrations: DBE-DBCH is a proven endocrine disruptor of sex and thyroid hormone pathways, with in vivo toxic effects on reproductive, metabolic, and other endpoints. The objectives of this review are to identify the current state of knowledge concerning DBE-DBCH through an evaluation of its persistence, potential for bioaccumulation, and characterization of its toxicity, while identifying areas for future research.

Analysis of hexafluoropropylene oxide-dimer acid (HFPO-DA) by Liquid Chromatography-Mass Spectrometry (LC-MS): Review of Current Approaches and Environmental Levels.

Emerging per- and polyfluorinated compounds (PFAS) compounds are of increasing interest for environmental monitoring, one being hexafluoropropylene oxide-dimer acid (HFPO-DA), commonly referred to as GenX. The following review describes existing liquid chromatography-mass spectrometry (LC-MS) methods used to analyze HFPO-DA, including sample preparation and method sensitivity relative to other PFAS. Analytical challenges are also described, in particular the significant formation of in-source fragmentation, dimer and dimer adducts which detract from [M-H]- signal. Lastly, detected levels of HFPO-DA in environmental and biological samples are compared across the limited number of available field exposure studies, which found several µg/L concentrations in water samples taken near fluorochemical plant discharges.

Challenges in the Analysis of Novel Flame Retardants in Indoor Dust: Results of the INTERFLAB 2 Interlaboratory Evaluation.

The Interlaboratory Study of Novel Flame Retardants (INTERFLAB 2) was conducted by 20 laboratories in 12 countries to test the precision and accuracy of the analysis of 24 "novel" flame retardants (NFRs). Laboratories analyzed NFRs in injection-ready test mixtures, in extracts of residential dust, and in residential dust to evaluate the influence of dust handling and extraction. For test mixtures, mean reported concentrations of PBT, PBEB, EH-TBB, TBBPA, TBDP-TAZTO, TBOEP, α-TBCO, ß-DBE-DBCH, and total HBCDD differed by >25% relative to reference values. Coefficients of variation were higher in dusts/dust extracts than in test mixtures. Concentrations among laboratories ranged over 3-4 orders of magnitude for HBB, TBP-DBPE, TBP-AE, and TDCIPP in dust extracts and dusts. Most laboratories produced repeatable dust concentrations, but differences reported in the literature among laboratories of <70% could be due to analytical variability, and the attribution of such differences to other causes should be made with caution. Most variations in accuracy and precision were introduced by matrix effects and/or sample processing, rather than instrumental analysis. We recommend recovery correction to improve accuracy. There is a need to improve analytical methods and to validate methods on complex matrices such as standard reference materials for dust or spiked matrices.

Characterization of Nine Isomers in Commercial Samples of Perfluoroethylcyclohexanesulfonate and of Some Minor Components Including PFOS Isomers.

Electrochemical fluorination of 4-ethylbenzenesulfonyl halides produces a mixture of compounds that has found extensive use as an erosion inhibitor in aircraft hydraulic fluids. This paper reports a study of the composition of commercial samples of this material from two industrial scale manufacturers in terms of the structures and relative concentrations of their components, the major of which is perfluoroethylcyclohexanesulfonate (PFECHS). Fractionation of one of these mixtures by column chromatography produced fractions in which all significant components were of sufficient purity to allow assignment of their structures by 19F NMR spectroscopy. Assessment of the relevant signals in the 19F NMR spectra of the commercial mixtures by integration revealed the presence of 14 constituents at levels ≥0.5% in terms of molar contributions. Ten of these involve five pairs of geometric isomers, including cis- and trans-PFECHS which accounted for between 55% and 60% of the components present. Three constituents were determined to be isomers of perfluorooctanesulfonate (PFOS), two branched and the other linear PFOS itself. The availability of samples of the various components also allowed us to identify the compounds responsible for the peaks observed when the commercial samples were analyzed by LC/MS using either C18 or perfluorophenyl stationary phases.

Dechlorinated Analogues of Dechlorane Plus.

Degradation products of the chlorinated additive flame retardant Dechlorane Plus (DP) have been discovered globally. However, the identity of many of these species remains unknown due to a lack of available analytical standards, hindering the ability to quantitatively measure the amounts of these compounds in the environment. In the present study, synthetic routes to possible dechlorinated DP derivatives were investigated in an effort to identify the environmentally significant degradation products. The methano-bridge chlorines of anti- and syn-DP were selectively replaced by hydrogen atoms to give six new hydrodechlorinated DP analogues. The identity and absolute configuration of all of these compounds were confirmed by GC-MS, NMR spectroscopy, and X-ray diffraction studies. These compounds were observed in sediment samples from streams and rivers in relatively rural areas of Ontario and are thus environmentally relevant.

Impacts of Unregulated Novel Brominated Flame Retardants on Human Liver Thyroid Deiodination and Sulfotransferation.

The inhibitory effects of five novel brominated flame retardants, 1,2-bis(2,4,5-tribromophenoxy)ethane (BTBPE), decabromodiphenylethane (DBDPE), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (EH-TBB), bis(2-ethylhexyl)tetrabromophthalate (BEH-TEBP), and ß-tetrabromoethylcyclohexane (ß-TBECH), on thyroid hormone deiodinase (DIO) and sulfotransferase (SULT) activity were investigated using human in vitro liver microsomal and cytosolic bioassays. Enzymatic activity was measured by incubating active human liver subcellular fractions with thyroid hormones (T4 and rT3 separately) and measuring changes in thyroid hormone (T4, T3, rT3, and 3,3'-T2) concentrations. Only DBDPE showed inhibition of both outer and inner ring deiodination (O and IRD) of T3 and 3,3'-T2 formation from T4, respectively, with an estimated IC50 of 160 nM; no statistically significant inhibition of SULT activity was observed. ORD inhibition of 3,3'-T2 formation from rT3 was also observed (IC50 ∼ 100 nM). The kinetics of T4 O and IRD were also investigated, although a definitive mechanism could not be identified as the Michaelis-Menten parameters and maximal rate constants were not significantly different. Concentrations tested were intentionally above expected environmental levels, and this study suggests that these NBFRs are not potent human liver DIO and SULT inhibitors. To our knowledge, DBDPE is the first example of a nonhydroxylated contaminant inhibiting DIO activity, and further study of the mechanism of action is warranted.

Discovery of 40 Classes of Per- and Polyfluoroalkyl Substances in Historical Aqueous Film-Forming Foams (AFFFs) and AFFF-Impacted Groundwater.

Aqueous film-forming foams (AFFFs), containing per- and polyfluoroalkyl substances (PFASs), are released into the environment during response to fire-related emergencies. Repeated historical applications of AFFF at military sites were a result of fire-fighter training exercises and equipment testing. Recent data on AFFF-impacted groundwater indicates that ∼25% of the PFASs remain unidentified. In an attempt to close the mass balance, a systematic evaluation of 3M and fluorotelomer-based AFFFs, commercial products, and AFFF-impacted groundwaters from 15 U.S. military bases was conducted to identify the remaining PFASs. Liquid chromatography quadrupole time-of-flight mass spectrometry was used for compound discovery. Nontarget analysis utilized Kendrick mass defect plots and a "nontarget" R script. Suspect screening compared masses with those of previously reported PFASs. Forty classes of novel anionic, zwitterionic, and cationic PFASs were discovered, and an additional 17 previously reported classes were observed for the first time in AFFF and/or AFFF-impacted groundwater. All 57 classes received an acronym and IUPAC-like name derived from collective author knowledge. Thirty-four of the 40 newly identified PFAS classes derive from electrochemical fluorination (ECF) processes, most of which have the same base structure. Of the newly discovered PFASs found only in AFFF-impacted groundwater, 11 of the 13 classes are ECF-derived, and the remaining two classes are fluorotelomer-derived, which suggests that both ECF- and fluorotelomer-based PFASs are persistent in the environment.

Enantioselective Analytical- and Preparative-Scale Separation of Hexabromocyclododecane Stereoisomers Using Packed Column Supercritical Fluid Chromatography.

Hexabromocyclododecane (HBCDD) is an additive brominated flame retardant which has been listed in Annex A of the Stockholm Convention for elimination of production and use. It has been reported to persist in the environment and has the potential for enantiomer-specific degradation, accumulation, or both, making enantioselective analyses increasingly important. The six main stereoisomers of technical HBCDD (i.e., the (+) and (-) enantiomers of α-, ß-, and γ-HBCDD) were separated and isolated for the first time using enantioselective packed column supercritical fluid chromatography (pSFC) separation methods on a preparative scale. Characterization was completed using published chiral liquid chromatography (LC) methods and elution profiles, as well as X-ray crystallography, and the isolated fractions were definitively identified. Additionally, the resolution of the enantiomers, along with two minor components of the technical product (δ- and ε-HBCDD), was investigated on an analytical scale using both LC and pSFC separation techniques, and changes in elution order were highlighted. Baseline separation of all HBCDD enantiomers was achieved by pSFC on an analytical scale using a cellulose-based column. The described method emphasizes the potential associated with pSFC as a green method of isolating and analyzing environmental contaminants of concern.

Characterization and Biological Potency of Mono- to Tetra-Halogenated Carbazoles.

This paper deals with the characterization and aryl hydrocarbon receptor (AhR) agonist activities of a series of chlorinated, brominated, and mixed bromo/chlorocarbazoles, some of which have been identified in various environmental samples. Attention is directed here to the possibility that halogenated carbazoles may currently be emitted into the environment as a result of the production of carbazole-containing polymers present in a wide variety of electronic devices. We have found that any carbazole that is not substituted in the 1,3,6,8 positions may be lost during cleanup of environmental extracts if a multilayer column is utilized, as is common practice for polychlorinated dibenzo-p-dioxin (dioxin) and related compounds. In the present study, (1)H NMR spectral shift data for 11 relevant halogenated carbazoles are reported, along with their gas chromatographic separation and analysis by mass spectrometry. These characterization data allow for confident structural assignments and the derivation of possible correlations between structure and toxicity based on the halogenation patterns of the isomers investigated. Some halogenated carbazoles exhibit characteristics of persistent organic pollutants and their potential dioxin-like activity was further investigated. The structure-dependent induction of CYP1A1 and CYP1B1 gene expression in Ah-responsive MDA-MB-468 breast cancer cells by these carbazoles was similar to that observed for other dioxin-like compounds, and the magnitude of the fold induction responses for the most active halogenated carbazoles was similar to that observed for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). 2,3,6,7-Tetrachlorocarbazole was one of the most active halogenated carbazoles and, like TCDD, contains 4 lateral substituents; however, the estimated relative effect potency for this compound (compared to TCDD) was 0.0001 and 0.0032, based on induction of CYP1A1 and CYP1B1 mRNA, respectively.

Interlaboratory study of novel halogenated flame retardants: INTERFLAB.

Flame retardants (FRs) have come under considerable scientific and public scrutiny over the past decade. A lack of reference materials and standardized analytical methods has resulted in questions regarding the variation of measurements from different studies. We evaluated this variation by performing an international interlaboratory study assessing analytical capabilities as well as the accuracy and precision of results for a range of flame retardants (International Flame Retardant Laboratory Study, INTERFLAB). Thirteen international research laboratories participated in a blind interlaboratory comparison of 24 FRs. Results demonstrate good precision within replicates of test mixtures from individual laboratories, but problematic accuracy for several FRs and laboratories. Large ranges in the values reported for decabromodiphenylethane (DBDPE), tris(1,3-dichloropropyl)phosphate (TDCIPP), tetrabromobisphenol-A (TBBPA), and hexabromocyclododecane (HBCD) (>50 % relative standard deviations among measured values) and large deviations from the reference values (>25 % bias in accuracy) suggest potential problems for comparability of results. DBDPE, HBCD, and TBBPA had significantly poorer accuracy and precision, suggesting that current analytical methods are not providing reliable results for these FRs.

Development of liquid chromatography atmospheric pressure chemical ionization tandem mass spectrometry for analysis of halogenated flame retardants in wastewater.

Until recently, atmospheric pressure photoionization (APPI) has typically been used for the determination of non-polar halogenated flame retardants (HFRs) by liquid chromatography (LC) tandem mass spectrometry. In this study, we demonstrated the feasibility of utilizing liquid chromatography atmospheric pressure chemical ionization (APCI) tandem mass spectrometry (LC-APCI-MS/MS) for analysis of 38 HFRs. This developed method offered three advantages: simplicity, rapidity, and high sensitivity. Compared with APPI, APCI does not require a UV lamp and a dopant reagent to assist atmospheric pressure ionization. All the isomers and the isobaric compounds were well resolved within 14-min LC separation time. Excellent instrument detection limits (6.1 pg on average with 2.0 muL injection) were observed. The APCI mechanism was also investigated. The method developed has been applied to the screening of wastewater samples for screening purpose, with concentrations determined by LC-APCI-MS/MS agreeing with data obtained via gas chromatography high resolution mass spectrometry.

Disposition of perfluorinated acid isomers in Sprague-Dawley rats; part 1: single dose.

Perfluorinated acids (PFAs) and their precursors (PFA-precursors) exist in the environment as linear and multiple branched isomers. These isomers are hypothesized to have different biological properties, but no isomer-specific data are currently available. The present study is the first in a two-part project examining PFA isomer-specific uptake, tissue distribution, and elimination in a rodent model. Seven male Sprague-Dawley rats were administered a single gavage dose of approximately 500 microg/kg body weight perfluorooctane sulfonate (C(8)F(17)SO(3)(-), PFOS), perfluorooctanoic acid (C(7)F(15)CO(2)H, PFOA), and perfluorononanoic acid (C(8)F(17)CO(2)H, PFNA) and 30 microg/kg body weight perfluorohexane sulfonate (C(6)F(13)SO(3)(-), PFHxS). Over the subsequent 38 d, urine, feces, and tail-vein blood samples were collected intermittently, while larger blood volumes and tissues were collected on days 3 and 38 for isomer analysis by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). For all PFAs, branched isomers generally had lower blood depuration half-lives than the corresponding linear isomer. The most remarkable exception was for the PFOS isomer containing an alpha-perfluoromethyl branch (1m-PFOS), which was threefold more persistent than linear PFOS, possibly due to steric shielding of the hydrophilic sulfonate moiety. For perfluoromonomethyl-branched isomers of PFOS, a structure-property relationship was observed whereby branching toward the sulfonate end of the perfluoroalkyl chain resulted in increased half-lives. For PFHxS, PFOA, and PFOS, preferential elimination of branched isomers occurred primarily via urine, whereas for PFNA preferential elimination of the isopropyl isomer occurred via both urine and feces. Changes in the blood isomer profiles over time and their inverse correlation to isomer elimination patterns in urine, feces, or both provided unequivocal evidence of significant isomer-specific biological handling. Source assignment based on PFA isomer profiles in biota must therefore be conducted with caution, because isomer profiles are unlikely to be conserved in biological samples.

Disposition of perfluorinated acid isomers in Sprague-Dawley rats; part 2: subchronic dose.

Two major industrial synthetic pathways have been used to produce perfluorinated acids (PFAs) or their precursors: Telomerization and electrochemical fluorination (ECF). Products of telomer and ECF origin can be distinguished by structural isomer profiles. A mixture of linear and branched perfluoroalkyl isomers is associated with ECF. Telomer products characteristically consist of a single perfluoroalkyl geometry, typically linear. In biota, it is unclear if the isomer profile is conserved relative to the exposure medium and hence whether PFA isomer profiles in organisms are useful for distinguishing environmental PFA sources. A companion study suggested isomer-specific disposition following a single oral gavage exposure to rats. To confirm these findings under a more realistic subchronic feeding scenario, male and female rats were administered PFA isomers by diet for 12 weeks, followed by a 12-week depuration period. The diet contained 500 ng/g each of ECF perfluorooctanoate (PFOA, approximately 80% n-PFOA), ECF perfluorooctane sulfonate (PFOS, approximately 70% n-PFOS), and linear and isopropyl perfluorononanoate (n- and iso-PFNA). Blood sampling during the exposure phase revealed preferential accumulation of n-PFOA and n-PFNA compared to most branched isomers. Female rats depurated all isomers faster than males. Both sexes eliminated most branched perfluorocarboxylate isomers more rapidly than the n-isomer. Elimination rates of the major branched PFOS isomers were not statistically different from n-PFOS. Two minor isomers of ECF PFOA and one branched PFOS isomer had longer elimination half-lives than the n-isomers. Although extrapolation of these pharmacokinetics trends in rats to humans and wildlife requires careful consideration of dosage level and species-specific physiology, cumulative evidence suggests that perfluorocarboxylate isomer profiles in biota may not be suitable for quantifying the relative contributions of telomer and ECF sources.

Some issues relating to the use of perfluorooctanesulfonate (PFOS) samples as reference standards.

Samples of potassium perfluorooctanesulfonate (PFOSK) from three suppliers were analyzed by LC-ESI-MS/MS for purity and by LC-ESI-MS for the percentage of linear isomer present. Our data indicated that the purity ranged from 80% to 98% and the percentages of linear isomer from 67% to 79%. The proportion of branched isomers present in the samples was also estimated using (19)F NMR. These results agreed quite closely with those found by LC-ESI-MS indicating that there is essentially no difference in overall SIM response factor for the branched isomers vs. that of the linear isomer. Several further observations relevant to the use of standards when analyzing for PFOS were encountered during this study. It appears unlikely that matrix effects attributable to the cation (sodium or potassium) present in PFOSNa or PFOSK internal standards is an issue. In seeking potential matrix effects, it was found that the chromatography was improved substantially when the standard was injected as a solution in 80:20 methanol/water rather than 100% methanol. Notably, in concert with the improvement in chromatography, an increase of about 10% in response was observed. In some closely related studies, when (18)O(2) mass-labeled perfluorohexanesulfonate was used as an internal standard, the actual and theoretical concentration ratios matched closely those for related native sulfonates as long as they did not co-elute. However, when they did co-elute, the peak intensities of the native species were enhanced by about 5%, while those of the labeled compound were suppressed by a similar amount. If this effect were not taken into account, the concentration of the native would be inflated by 10%.

Structure characterization and thermal stabilities of the isomers of the brominated flame retardant 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane.

1,2-Dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) is used primarily as an additive flame retardant. 1H NMR spectroscopy and an X-ray structure determination have revealed that a technical mixture consists largely of two (of the four possible) diastereomers, rac-(1R,2R)-1,2-dibromo-(4S)-4-((1S)-1,2-dibromoethyl)cyclohexane (alpha-TBECH) and rac-(1R,2R)-1,2-dibromo-(4S)-4-((1R)-1,2-dibromoethyl)cyclohexane (beta-TBECH), in a mole ratio of approximately 1:1. The two other possible isomers, gamma- and delta-TBECH, were not detected in a technical mixture. The TBECH isomers are thermally sensitive and can easily interconvert at temperatures of 125 degrees C. A thermal equilibrium mixture of alpha-, beta-, gamma- and delta-TBECH consists of approximately 33%, 33%, 17% and 17% of these isomers, respectively. Separation of all four TBECH diastereomers, with minimal thermal interconversion of the isomers, was achieved by careful selection of GC-capillary column length and injector temperature. Although technical TBECH does not contain the gamma- and delta-isomers, they may still be relevant environmental contaminants since manufacturing processes utilize thermal processes which may induce their formation.

(1R,2R,5R,6R,9S,10S,13S,14S)-1,6,7,8,9,14,15,16,17,17-Decachloro-penta-cyclo-[12.2.1.1.0.0]octa-deca-7,15-diene.

The title compound, C(18)H(14)Cl(10), is a decachlorinated commercial flame retardant. The structure determination confirms the relative stereochemistry. The central eight-membered ring is in a chair-type conformation. In the crystal structure, there are no significant inter-molecular inter-actions and mol-ecules are separated by normal van der Waals distances.

(1R,2R,5R,6S,9R,10S,13S,14S,18R)-1,6,7,8,9,14,15,16,17,17,18-Undeca-chloro-penta-cyclo-[12.2.1.1.0.0]octa-deca-7,15-diene.

The title compound, C(18)H(13)Cl(11), is an undecachlorinated commercial flame retardant. The asymmetric unit contains two independent half-mol-ecules. The complete mol-ecules are generated by crystallographic inversion symmetry, causing the terminal H atoms and one of the Cl atoms to be disordered equally over two sites in each mol-ecule. The central eight-membered rings are in chair-type conformations. In the crystal structure, there is a single weak inter-molecular C-H⋯Cl hydrogen bond.

Synthesis of the two minor isomers, delta- and epsilon-1,2,5,6,9,10-hexabromocyclododecane, present in commercial hexabromocyclododecane.

Hexabromocyclododecane (HBCD) is prepared commercially by bromination of cis,trans,trans-cyclododecatriene (ctt-CDT) and widely used as a flame retardant, particularly in polystyrene foams. Commercial HBCD consists largely of three diastereomers, alpha-, beta-, and gamma-HBCD, the structures of which have been known for many years. Recently, the presence in the mixture of small amounts of two minor diastereomers, delta- and epsilon-HBCD, has been reported. Bearing in mind the manner in which commercial HBCD is generated, it was anticipated that these components are probably formed by bromination of trans,trans,trans-cyclododecatriene (ttt-CDT), a common contaminant in commercial ctt-CDT. Indeed, when a sample of ttt-CDT was brominated it gave two products, the NMR spectra and LC/MS and GC/MS behaviour of which confirmed that they are identical to the minor components, delta- and epsilon-HBCD, present in commercial HBCD.

Coupling of supercritical fluid chromatography to mass spectrometry for the analysis of Dechlorane Plus: Examination of relevant negative ion atmospheric pressure chemical ionization mechanisms.

During an investigation of the potential associated with coupling packed column supercritical fluid chromatography (pSFC) to mass spectrometry for the analysis of Dechlorane Plus and related compounds, it was found that negative ion atmospheric pressure chemical ionization (APCI) was a promising ionization technique. In the course of maximizing the responses associated with the target analytes, it proved useful to examine some aspects of the complex nature and reactivity of the corona discharge plasma generated to explain the observed ionization products. Various dopants/reagents were screened for both APCI and atmospheric pressure photoionization (APPI) in negative ion mode and mechanisms of ionization involving superoxide were elucidated based on the results obtained. Superoxide formation was found to be temperature dependent and directly related to the intensity of the ion cluster [M-Cl+O]- obtained for the target DP analytes. Furthermore, triethylamine was identified as a reagent capable of suppressing unwanted side reactions during the ionization process and maximizing response associated with the analytes of interest. The applicability of pSFC-APCI/MS for the separation and detection of Dechlorane Plus and related compounds was demonstrated by analyzing Lake Ontario sediment and comparing the results with values reported in the scientific literature.