Chemical Identity of Poly(N-vinylpyrrolidone) End Groups Impact Shape Evolution During the Synthesis of Ag Nanostructures.

Ag nanocubes (AgNCs) are predominantly synthesized by the polyol method, where the solvent (ethylene glycol) is considered the reducing agent and poly(N-vinylpyrrolidone) (PVP) the shape-directing agent. An experimental phase diagram for the formation of Ag nanocubes as a function of PVP monomer concentration (Cm) and molecular weight (Mw) demonstrated end groups of PVP impact the final Ag product. Measured rates of the initial Ag+ reduction at different PVP Cm and Mw confirmed the reducing effect originates from end-groups. PVP with well-defined aldehyde and hydroxyl end groups lead to the formation of Ag nanocubes and nanowires respectively, indicating the faster reducing agent formed kinetically preferred nanowires. We demonstrate PVP end-groups induce initial reduction of Ag+ to form seeds followed by autocatalytic reduction of Ag+ by ethylene glycol (and not solvent oxidation products) to form Ag nanostructures. The current study enabled a quantitative description of the role of PVP in nanoparticle shape-control and demonstrates a unique opportunity to design nanostructures by combining nanoparticle synthesis with polymer design to introduce specific physicochemical properties.

Understanding the Solution-Phase Growth of Cu and Ag Nanowires and Nanocubes from First Principles.

In this feature article, we provide an account of the Langmuir Lecture delivered by Kristen Fichthorn at the Fall 2020 Virtual Meeting of the American Chemical Society. We discuss how multiscale theory and simulations based on first-principles DFT were useful in uncovering the intertwined influences of kinetics and thermodynamics on the shapes of Ag and Cu cubes and nanowires grown in solution. We discuss how Ag nanocubes can form through PVP-modified deposition kinetics and how the addition of chloride to the synthesis can promote thermodynamic cubic shapes for both Ag and Cu. We discuss kinetic factors contributing to nanowire growth: in the case of Ag, we show that high-aspect-ratio nanowires can form as a consequence of Ag atom surface diffusion on the strained surfaces of Marks-like decahedral seeds. On the other hand, solution-phase chloride enhances Cu nanowire growth due to a synergistic interaction between adsorbed chloride and hexadecylamine (HDA), which leaves the {111} nanowire ends virtually bare while the {100} sides are fully covered with HDA. For each of these topics, a synergy between theory and experiment led to significant progress.

Factors controlling the molecular modification of one-dimensional zeolites.

Interactions between organic molecules and inorganic materials are ubiquitous in many applications and often play significant roles in directing pathways of crystallization. It is frequently debated whether kinetics or thermodynamics plays a more prominent role in the ability of molecular modifiers to impact crystal nucleation and growth processes. In the case of nanoporous zeolites, approaches in rational design often capitalize on the ability of organics, used as either modifiers or structure-directing agents, to markedly impact the physicochemical properties of zeolites. It has been demonstrated for multiple topologies that modifier-zeolite interactions can alter crystal size and morphology, yet few studies have distinguished the roles of thermodynamics and kinetics. We use a combination of calorimetry and molecular modeling to estimate the binding energies of organics on zeolite surfaces and correlate these results with synthetic trends in crystal morphology. Our findings reveal unexpectedly small energies of interaction for a range of modifiers with two zeolite structures, indicating the effect of organics on zeolite crystal surface free energy is minor and kinetic factors most likely govern growth modification.

Kinetics of H2 Adsorption at the Metal-Support Interface of Au/TiO2 Catalysts Probed by Broad Background IR Absorbance.

H2 adsorption on Au catalysts is weak and reversible, making it difficult to quantitatively study. We demonstrate H2 adsorption on Au/TiO2 catalysts results in electron transfer to the support, inducing shifts in the FTIR background. This broad background absorbance (BBA) signal is used to quantify H2 adsorption; adsorption equilibrium constants are comparable to volumetric adsorption measurements. H2 adsorption kinetics measured with the BBA show a lower Eapp value (23 kJ mol-1 ) for H2 adsorption than previously reported from proxy H/D exchange (33 kJ mol-1 ). We also identify a previously unreported H-O-H bending vibration associated with proton adsorption on electronically distinct Ti-OH metal-support interface sites, providing new insight into the nature and dynamics of H2 adsorption at the Au/TiO2 interface.

Enhanced Surface Activity of MWW Zeolite Nanosheets Prepared via a One-Step Synthesis.

The synthesis of two-dimensional (2D) zeolites has garnered attention due to their superior properties for applications that span catalysis to selective separations. Prior studies of 2D zeolite catalysts demonstrated enhanced mass transport for improved catalyst lifetime and selectivity. Moreover, the significantly higher external surface area of 2D materials allows for reactions of bulky molecules too large to access interior pores. There are relatively few protocols for preparing 2D materials, owing to the difficultly of capping growth in one direction to only a few unit cells. To accomplish this, it is often necessary to employ complex, commercially unavailable organic structure-directing agents (OSDAs) prepared via multistep synthesis. However, a small subset of zeolite structures exist as naturally layered materials where postsynthesis steps can be used to exfoliate samples and produce ultrathin 2D nanosheets. In this study, we selected a common layered zeolite, the MWW framework, to explore methods of preparing 2D nanosheets via one-pot synthesis in the absence of complex organic templates. Using a combination of high-resolution microscopy and spectroscopy, we show that 2D MMW-type layers with an average thickness of 3.5 nm (ca. 1.5 unit cells) can be generated using the surfactant cetyltrimethylammonium (CTA), which operates as a dual OSDA and exfoliating agent to affect Al siting and to eliminate the need for postsynthesis exfoliation, respectively. We tested these 2D catalysts using a model reaction that assesses external (surface) Brønsted acid sites and observed a marked increase in the conversion relative to three-dimensional MWW (MCM-22) and 2D layers prepared from postsynthesis exfoliation (ITQ-2). Collectively, our findings identify a facile and effective route to directly synthesize 2D MWW-type materials, which may prove to be more broadly applicable to other layered zeolites.

Anisotropic Growth of Silver Nanoparticles Is Kinetically Controlled by Polyvinylpyrrolidone Binding.

Polyvinylpyrrolidone (PVP) is used in the synthesis of Ag nanoparticles (NPs) with controlled shape, most commonly producing cubes. The mechanism for shape control is unclear but believed by many to be caused by preferential binding of PVP to Ag(100) facets compared to Ag(111) facets and assumed by most to be the result of thermodynamic control, whereby facets with lower interfacial free energy predominate. To investigate this mechanism, we measured adsorption isotherms of PVP on different-shaped Ag NPs, to determine the thermodynamics of PVP adsorption to Ag(100) and Ag(111) facets. The equilibrium adsorption constant is independent of PVP molecular weight and depends only weakly on NP shape (and thus Ag facet). The equilibrium adsorption constant for PVP on Ag(111) (2.8 M-1) is about half that on Ag(100) (5 M-1). From a Wulff construction, this difference is not nearly enough to produce cubes via thermodynamic control. This result indicates the importance of kinetic control of the Ag nanoparticle shape by PVP, as has recently been proposed.

Thermochemical Measurements of Cation Exchange in CdSe Nanocrystals Using Isothermal Titration Calorimetry.

Among the various reported post synthetic modifications of colloidal nanocrystals, cation exchange (CE) is one of the most promising and versatile approaches for the synthesis of nanostructures that cannot be directly synthesized from their constitutive precursors. Numerous studies have reported on the qualitative analysis of these reactions, but rigorous quantitative study of the thermodynamics of CE in colloidal nanoparticles is still lacking. We demonstrate using isothermal titration calorimetry (ITC), the thermodynamics of the CE between cadmium selenide (CdSe) nanocrystals and silver in solution can be quantified. We survey the influence of CdSe nanocrystal diameter, capping ligands and temperature on the thermodynamics of the exchange reaction. Results obtained from ITC provide a detailed description of overall thermodynamic parameters-equilibrium constant ( K eq), enthalpy (Δ H), entropy (Δ S) and stoichiometry ( n)-of the exchange reaction. We compared the free energy change of reaction (Δ G) between CdSe and Ag+ obtained directly from ITC for both CdSe bulk and nanoparticles with values calculated from previously reported methods. While the calculated value is closer to the experimentally obtained Δ G rxn for bulk particles, nanocrystals show an additional Gibbs free energy stabilization of ∼-14 kJ/mol Se. We discuss a thermochemical cycle elucidating the steps involved in the overall cation exchange process. This work demonstrates the application of ITC to probe the thermochemistry of nanoscale transformations under relevant solution conditions.

Quantitative Attachment of Bimetal Combinations of Transition-Metal Ions to the Surface of TiO2 Nanorods.

We report the sequential, quantitative loading of transition-metal ions (Cr3+, Mn2+, Fe2+, Co2+, Ni2+, and Cu2+) onto the surface of rod-shaped anatase TiO2 nanocrystals in bimetallic combinations (6 C2 = 15) to form M,M'-TiO2 nanocrystals. The materials were characterized with transmission electron microscopy (TEM), powder X-ray diffraction (XRD), elemental analysis, X-ray photoelectron spectroscopy (XPS), and UV-visible spectroscopy. TEM and XRD data indicate that the sequential adsorption of metal ions occurs with the retention of the phase and morphology of the nanocrystal. Atomistic models of the M,M'-TiO2 nanocrystals were optimized with density functional theory calculations. Calculated UV-visible absorption spectra and partial charge density maps of the donor and acceptor states for the electronic transitions indicate the importance of metal-to-metal charge transfer (MMCT) processes.

Identification of Second Shell Coordination in Transition Metal Species Using Theoretical XANES: Example of Ti-O-(C, Si, Ge) Complexes.

X-ray absorption near-edge structure (XANES) is a common technique for elucidating oxidation state and first shell coordination geometry in transition metal complexes, among many other materials. However, the structural information obtained from XANES is often limited to the first coordination sphere. In this study, we show how XANES can be used to differentiate between C, Si, and Ge in the second coordination shell of Ti-O-(C, Si, Ge) molecular complexes based on differences in their Ti K-edge XANES spectra. Experimental spectra were compared with theoretical spectra calculated using density functional theory structural optimization and ab initio XANES calculations. The unique features for second shell C, Si, and Ge present in the Ti K pre-edge XANES are attributed to the interaction between the Ti center and the O-X (X = C, Si, or Ge) antibonding orbitals.

Charge Transfer Stabilization of Late Transition Metal Oxide Nanoparticles on a Layered Niobate Support.

Interfacial interactions between late transition metal/metal oxide nanoparticles and oxide supports impact catalytic activity and stability. Here, we report the use of isothermal titration calorimetry (ITC), electron microscopy and density functional theory (DFT) to explore periodic trends in the heats of nanoparticle-support interactions for late transition metal and metal oxide nanoparticles on layered niobate and silicate supports. Data for Co(OH)2, hydroxyiridate-capped IrOx·nH2O, Ni(OH)2, CuO, and Ag2O nanoparticles were added to previously reported data for Rh(OH)3 grown on nanosheets of TBA0.24H0.76Ca2Nb3O10 and a layered silicate. ITC measurements showed stronger bonding energies in the order Ag < Cu ≈ Ni ≈ Co < Rh < Ir on the niobate support, as expected from trends in M-O bond energies. Nanoparticles with exothermic heats of interaction were stabilized against sintering. In contrast, ITC measurements showed endothermic interactions of Cu, Ni, and Rh oxide/hydroxide nanoparticles with the silicate and poor resistance to sintering. These trends in interfacial energies were corroborated by DFT calculations using single-atom and four-atom cluster models of metal/metal oxide nanoparticles. Density of states and charge density difference calculations reveal that strongly bonded metals (Rh, Ir) transfer d-electron density from the adsorbed cluster to niobium atoms in the support; this mixing is absent in weakly binding metals, such as Ag and Au, and in all metals on the layered silicate support. The large differences between the behavior of nanoparticles on niobate and silicate supports highlight the importance of d-orbital interactions between the nanoparticle and support in controlling the nanoparticles' stability.

Interfacial bonding stabilizes rhodium and rhodium oxide nanoparticles on layered Nb oxide and Ta oxide supports.

Metal nanoparticles are commonly supported on metal oxides, but their utility as catalysts is limited by coarsening at high temperatures. Rhodium oxide and rhodium metal nanoparticles on niobate and tantalate supports are anomalously stable. To understand this, the nanoparticle-support interaction was studied by isothermal titration calorimetry (ITC), environmental transmission electron microscopy (ETEM), and synchrotron X-ray absorption and scattering techniques. Nanosheets derived from the layered oxides KCa2Nb3O10, K4Nb6O17, and RbTaO3 were compared as supports to nanosheets of Na-TSM, a synthetic fluoromica (Na0.66Mg2.68(Si3.98Al0.02)O10.02F1.96), and α-Zr(HPO4)2·H2O. High surface area SiO2 and γ-Al2O3 supports were also used for comparison in the ITC experiments. A Born-Haber cycle analysis of ITC data revealed an exothermic interaction between Rh(OH)3 nanoparticles and the layered niobate and tantalate supports, with ΔH values in the range -32 kJ·mol(-1) Rh to -37 kJ·mol(-1) Rh. In contrast, the interaction enthalpy was positive with SiO2 and γ-Al2O3 supports. The strong interfacial bonding in the former case led to "reverse" ripening of micrometer-size Rh(OH)3, which dispersed as 0.5 to 2 nm particles on the niobate and tantalate supports. In contrast, particles grown on Na-TSM and α-Zr(HPO4)2·H2O nanosheets were larger and had a broad size distribution. ETEM, X-ray absorption spectroscopy, and pair distribution function analyses were used to study the growth of supported nanoparticles under oxidizing and reducing conditions, as well as the transformation from Rh(OH)3 to Rh nanoparticles. Interfacial covalent bonding, possibly strengthened by d-electron acid/base interactions, appear to stabilize Rh(OH)3, Rh2O3, and Rh nanoparticles on niobate and tantalate supports.

Intermolecular N-H oxidative addition of ammonia, alkylamines, and arylamines to a planar σ(3)-phosphorus compound via an entropy-controlled electrophilic mechanism.

Ammonia, alkyl amines, and aryl amines are found to undergo rapid intermolecular N-H oxidative addition to a planar mononuclear σ(3)-phosphorus compound (1). The pentacoordinate phosphorane products (1·[H][NHR]) are structurally robust, permitting full characterization by multinuclear NMR spectroscopy and single-crystal X-ray diffraction. Isothermal titration calorimetry was employed to quantify the enthalpy of the N-H oxidative addition of n-propylamine to 1 ((n)PrNH2 + 1 → 1·[H][NH(n)Pr], ΔHrxn(298) = -10.6 kcal/mol). The kinetics of n-propylamine N-H oxidative addition were monitored by in situ UV absorption spectroscopy and determination of the rate law showed an unusually large molecularity (ν = k[1][(n)PrNH2](3)). Kinetic experiments conducted over the temperature range of 10-70 °C revealed that the reaction rate decreased with increasing temperature. Activation parameters extracted from an Eyring analysis (ΔH(⧧) = -0.8 ± 0.4 kcal/mol, ΔS(⧧) = -72 ± 2 cal/(mol·K)) indicate that the cleavage of strong N-H bonds by 1 is entropy controlled due to a highly ordered, high molecularity transition state. Density functional calculations indicate that a concerted oxidative addition via a classical three-center transition structure is energetically inaccessible. Rather, a stepwise heterolytic pathway is preferred, proceeding by initial amine-assisted N-H heterolysis upon complexation to the electrophilic phosphorus center followed by rate-controlling N → P proton transfer.

Simple strategies for fabrication of a periodic mesoporous aluminosilicate with crystalline walls.

An alkali-assisted cooperative assembly process of two different templating systems with aluminosilicate precursors is described. A highly ordered mesoporous zeolite with the 2D hexagonal symmetry mesospores and MFI zeolitic framework walls is synthesized. This method also allows the preparation of ZSM-5 with c- or b-axis-aligned mesopores. The materials have promising catalytic activities for organic reactions involving bulky molecules.

Illuminating surface atoms in nanoclusters by differential X-ray absorption spectroscopy.

We use differential extended X-ray absorption fine structure (Δ-EXAFS) to monitor the Ar-induced surface restructuring of silica-supported Pd nanoclusters (1 nm diameter) at 77 K. Δ-EXAFS analysis shows 9 ± 2 nearest-neighbor Pd-Pd bonds expand by 0.104 ± 0.005 Å as a result of Ar adsorption. Atomistic molecular dynamics simulations provide evidence for a model in which Ar drives restructuring of under-coordinated Pd atoms, leading to an increased Pd-Pd bond length of surface Pd atoms with no change in overall nearest-neighbor Pd-Pd coordination number. Based on observations from the atomistic simulations, it is likely that under-coordinated atoms are trapped in metastable states at 77 K and Ar provides the kinetic energy needed to overcome the barrier for surface restructuring. Together, experiment and theory highlight the ability of Δ-EXAFS to probe surface atoms of Pd nanoclusters.

Synthesis and modeling of hollow intermetallic Ni-Zn nanoparticles formed by the Kirkendall effect.

Intermetallic Ni-Zn nanoparticles (NPs) were synthesized via the chemical conversion of nickel NPs using a zerovalent organometallic zinc precursor. After the injection of a diethylzinc solution, Ni NPs progressively transformed from a solid to a hollow Ni-Zn intermetallic structure with time. During the transformation of Ni NPs to intermetallic structures, they retained their overall spherical morphology. The growth mechanism for the solid-to-hollow nanoparticle transformation is ascribed to the nanoscale Kirkendall effect due to unequal diffusion rates of Ni and Zn. We develop a diffusion model for nonreactive, homogeneous, diffusion-controlled intermetallic hollow NP formation including moving boundaries at the interfaces of void-solid and solid-bulk solutions. Apparent diffusion coefficients for both metals and vacancy were evaluated from modeling the time-dependent growth of the void. The apparent diffusion coefficients obtained in this system compared favorably with results from measurement at grain boundaries in bulk Ni-Zn. This study represents the first combined experimental modeling of the formation of hollow nanostructures by the nanoscale Kirkendall effect.

Thermodynamic profiles at the solvated inorganic-organic interface: the case of gold-thiolate monolayers.

The thermodynamic adsorption profile at a solvated organic-inorganic interface is probed by following the binding and organization of carboxylic acid-terminated alkanethiols of varying chain lengths (C2, C3, and C6) to the surface of gold nanoparticles (NPs) (5.4 ± 0.7, 9.5 ± 0.6, and 19.4 ± 1.1 nm diameter) using isothermal titration calorimetry (ITC). We discuss the effect of alkyl chain length, temperature, and Au NP size on the energetics at an organic-inorganic interface. ITC allows for the quantification of the adsorption constant, enthalpy of adsorption, entropy of adsorption, and the binding stoichiometry in a single experiment. The thermodynamic parameters support a mechanism of stepwise adsorption of thiols to the surface of Au NPs and secondary ordering of the thiols at the organic-inorganic interface. The adsorption enthalpies are chain-length dependent; enthalpy becomes more exothermic as longer chains are confined, compensating for greater decreases in entropy with increasing chain length. We observe an apparent compensation effect: the negative ΔH is compensated by a negative ΔS as the thiols self-assemble on the Au NP surface. A comparison of the thermodynamic parameters indicates thiol-Au NP association is enthalpy-driven because of the large, exothermic enthalpies accompanied by an unfavorable entropic contribution associated with confinement of alkyl chains, reduced trans-gauche interconversion, and the apparent ordering of solvent molecules around the hydrophobic organic thiols (hydrophobic effect). Understanding the thermodynamics of adsorption at NP surfaces will provide critical insight into the role of ligands in directing size and shape during NP synthesis since thiols are a common ligand choice (i.e., Brust method). The ITC technique is applicable to a larger number of structure-directing ligands and solvent combinations and therefore should become an important tool for understanding reaction mechanisms in nanostructure synthesis.

A US perspective on closing the carbon cycle to defossilize difficult-to-electrify segments of our economy.

Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. We discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.

Direct Determination of High-Affinity Binding Constants by Continuous Injection Isothermal Titration Calorimetry.

Isothermal titration calorimetry (ITC) is a method to determine thermodynamic values (ΔG, ΔH, and ΔS) for ligand-receptor binding in biological and abiological systems. It is challenging to directly determine subnanomolar dissociation constants using a standard incremental injection approach ITC (IIA-ITC) measurement. We recently demonstrated a continuous injection approach ITC (CIA-ITC) [ J. Phys. Chem. B 2021, 125, 8075-8087]enables the estimation of thermodynamic parameters in situ. In this work, we demonstrate a label-free and surface modification-free CIA-ITC to determine the complete binding thermodynamics of a ligand with a subnanomolar dissociation constant KD. The KD for desthiobiotin (DTB)-avidin binding was determined to be 6.5 pM with respect to the ligand by CIA-ITC, a quantity unsuccessfully measured with IIA-ITC and surface plasmon resonance spectroscopy (SPR). This value compares well with literature-reported spectroscopic determination of DTB-avidin binding. Criteria with respect to the concentration of the ligand and receptor and flow rate for obtaining true equilibrium dissociation constants without displacement titration are presented.

Atomic control of active-site ensembles in ordered alloys to enhance hydrogenation selectivity.

Intermetallic compounds offer unique opportunities for atom-by-atom manipulation of catalytic ensembles through precise stoichiometric control. The (Pd, M, Zn) γ-brass phase enables the controlled synthesis of Pd-M-Pd catalytic sites (M = Zn, Pd, Cu, Ag and Au) isolated in an inert Zn matrix. These multi-atom heteronuclear active sites are catalytically distinct from Pd single atoms and fully coordinated Pd. Here we quantify the unexpectedly large effect that active-site composition (that is, identity of the M atom in Pd-M-Pd sites) has on ethylene selectivity during acetylene semihydrogenation. Subtle stoichiometric control demonstrates that Pd-Pd-Pd sites are active for ethylene hydrogenation, whereas Pd-Zn-Pd sites show no measurable ethylene-to-ethane conversion. Agreement between experimental and density-functional-theory-predicted activities and selectivities demonstrates precise control of Pd-M-Pd active-site composition. This work demonstrates that the diversity and well-defined structure of intermetallics can be used to design active sites assembled with atomic-level precision.

Subnanometer replica molding of molecular steps on ionic crystals.

Replica molding with elastomeric polymers has been used routinely to replicate features less than 10 nm in size. Because the theoretical limit of this technique is set by polymer-surface interactions, atomic radii, and accessible volumes, replication at subnanometer length scales should be possible. Using polydimethylsiloxane to create a mold and polyurethane to form the replica, we demonstrate replication of elementary steps 3-5 Å in height that define the minimum separation between molecular layers in the lattices of the ionic crystals potassium dihydrogen phosphate and calcite. This work establishes the operation of replica molding at the molecular scale.