Assessment of the Use of Common Juniper (Juniperus communis L.) Foliage following the Cascade Principle.

Juniperus communis L. is a species commonly grown in regions of the Northern Hemisphere, and is a good candidate to be cultivated in marginal lands. Plants coming from a pruning performed in a natural population located in Spain were used to assess the yield and quality of different products obtained following the cascade principle. A total of 1050 kg of foliage biomass were crushed, steam-distilled, and separated into fractions to produce biochar and absorbents for the pet industry using pilot plants. The obtained products were analysed. The essential oil, with a yield of 0.45% dry basis and a qualitative chemical composition similar to that described for the berries in international standards or monographs, showed antioxidant activity with promising CAA results (inhibition of 89% of the cell's oxidation). However, regarding antibacterial and antifungal activities, it only inhibited the growth of microorganisms at the maximum concentration tested, 2.5%. Concerning the hydrolate, it did not show bioactivity. Regarding the biochar, whose yield was 28.79% dry basis, interesting results were obtained for its characterisation as a possible soil improver for agronomic purposes (PFC 3(A)). Finally, promising results were obtained regarding the use of common juniper as absorbent, taking into account the physical characterisation and odour control capacity.

Recovery of Terephthalic Acid from Densified Post-consumer Plastic Mix by HTL Process.

In this study, we investigate the hydrothermal liquefaction (HTL) of PET separated from a densified postconsumer plastic mix, with the aim of recovering its monomer. This second raw material is made up of 90% polyolefin, while the remaining 10% is made up of PET, traces of metals, paper, and glass. After preliminary separation by density in water, two batch experiments were performed on the sunken fraction (composed mainly of PET) in a stainless steel autoclave at 345 °C for 30 and 20 min. Both trials resulted in similar yields of the three phases. In particular, the solid yield is around 76% by weight. After a purification step, this phase was analyzed by UV-Vis, 1H-NMR, and FTIR spectroscopy and resulted to be constituted by terephthalic acid (TPA), a product of considerable industrial interest. The study proved that the hydrothermal liquefaction process coupled with density separation in water is effective for obtaining TPA from a densified postconsumer plastic mix, which can be used for new PET synthesis.

Effects of biochar on berseem clover (Trifolium alexandrinum, L.) growth and heavy metal (Cd, Cr, Cu, Ni, Pb, and Zn) accumulation.

Urban soil pollution by heavy metals (HMs) is a pressing problem in the development of urban agriculture (UA). In this context, the use of amendments, such as biochar, and phytoremediation are considered potentially cost-effective alternatives to conventional methods, and can be also combined to improve the remediation of soils from HMs. A pot experiment was performed to investigate the combined effect of berseem clover (Trifolium alexandrinum, L.) and biochar amendment in remediating a sandy soil collected near a shooting range area co-contaminated with Cd, Cr, Cu, Ni, Pb, and Zn. The biochar, obtained from a wood-chip gasifier fed with a mix of Douglas (Pseudotsuga menziesii, Mirb.) and Black Pine (Pinus nigra, J.F.Arnold) wood, was applied at two rates (0.8% and 1.6%, w/w). Eighteen weeks after sowing, all plants were harvested. The roots and aboveground tissues of the crops were separately collected and analyzed. The tested biochar effectively adsorbed the HMs (Cd, Cr, Cu, Ni, Pb, and Zn) from the soil. Biochar increased DW production of aboveground and root tissues. Moreover, biochar significantly reduced the concentration of Cr, Cu, Ni, and Pb in the aboveground tissues of berseem clover, although a significant reduction was not detected for Cd and Zn. Results indicated that berseem clover was a Cr, Ni and Pb excluder. However, this species can be considered suitable for Cu phytoextraction and Cd and Zn phytostabilization of slightly polluted urban soil. Only the Cu levels in the aerial biomass were below the acceptable limit for use as fodder.

Towards a better understanding of the HTL process of lignin-rich feedstock.

The hydrothermal liquefaction reactions (HTL) in subcritical conditions of a lignin residue has been studied on a lab scale. The starting material was a lignin rich residue co-produced by an industrial plant situated in Northern Italy producing lignocellulosic bioethanol. The reactions were carried out in batch mode using stainless steel autoclaves. The experiments were under the following operating conditions: two different temperatures (300-350 °C), the presence of basis catalysts (NaOH, and NH4OH) in different concentrations and the presence/absence of capping agent 2,6-bis-(1,1-dimethylethyl)-4-methylphenol (BHT). Lignin residue and reaction products were characterized by analytical and spectroscopic techniques such as CHN-S, TGA, GC-MS, EPR, and 1H-NMR with (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (T.E.M.P.O.). The addition of BHT did not significantly affect the yield of char which is formed by radical way. Spectroscopic analysis indicated that the level of radicals during the reaction was negligible. Therefore, the results obtained experimentally suggest that the reaction takes place via an ionic route while radical species would play a minor role.