Electronic and Structural Properties of MPtxB6-2x (M = Y, Yb): Structural Disorder in an Octahedral Boron Framework.

Two new ternary platinum borides, YPtxB6-2x and YbPtxB6-2x, were obtained by argon-arc melting of the elements followed by annealing at 780 °C (750 °C). The structures of these compounds combine the fragments of CaB6- and AuCu3-type structures [space group Pm3̅m; x = 1.15, a = 4.0550(4) Å and x = 1.34, a = 4.0449(2) Å for YPtxB6-2x and YbPtxB6-2x, respectively; single-crystal X-ray diffraction]. Two possible variants of B/Pt ordering (space group P4/mmm) were created via a group-subgroup approach targeting the derived stoichiometry. The architecture of the type-I YPtxB6-2x structure model (a' = a, b' = b, c' = c) combines the 4.82 boron nets alternating with the layers of Y and Pt; the type-II YPtxB6-2x structure model (a' = 2a, b' = 2b, c' = c) exhibits columns of linked [B24] truncated cubes filled with Y running along the c axis. The striking features of both structural models are [B4Pt2] octahedra. The structural similarities with hitherto reported structures (YB2C2, M2Ni21B20, MNi21B20, and ErNiB4) were drawn supporting the verity of these models. A chemical bonding analysis for type-I and type-II YPtxB6-2x based on electron localization function distribution revealed a two-center interaction forming the 4.82 boron nets for type-I YPtxB6-2x and a covalent bonding within [B4Pt2] octahedra as well as a two-center interaction for B-B intraoctahedral bonds for type-II YPtxB6-2x. Analysis of Bader charges revealed the cationic character of the yttrium atoms. The interactions for nondistorted areas of the structures agree well with the bonding picture calculated for constituent building structures, YB6 and YPt3. Electronic structure calculations predict YPtxB6-2x to be a metal with the density of states of around N(EF) = 1 states eV-1 f.u.-1. The exploration of the Y-Pt-B system in the relevant concentration range elucidated the homogeneity field of YPtxB6-2x (0.90 ≤ x ≤ 1.40) and revealed the existence of three more ternary phases at 780 °C: YPt2B (space group P6222), YPt3B (space group P4mm), and YPt5B2 (space group C2/m).

La2Pd3Ge5 and Nd2Pd3Ge5 Compounds: Chemical Bonding and Physical Properties.

The two La2Pd3Ge5 and Nd2Pd3Ge5 compounds, crystallizing in the oI40-U2Co3Ge5 crystal structure, were targeted for analysis of their chemical bonding and physical properties. The compounds of interest were obtained by arc melting and characterized by differential thermal analysis, scanning electron microscopy, and X-ray diffraction both on powder and on a single crystal (for the La analogue), to ensure the high quality of the samples and accurate crystallographic data. Chemical bonding was studied by analyzing the electronic structure and effective QTAIM charges of La2Pd3Ge5. A significant charge transfer mainly occurs from La to Pd so that Ge species assume tiny negative charges. This result, together with the -(I)COHP analysis, suggests that, in addition to the expected homopolar Ge bonds within zigzag chains, heteropolar interactions between Ge and the surrounding La and Pd occur with multicenter character. Covalent La-Pd interactions increase the complexity of chemical bonding, which could not be adequately described by the simplified, formally obeyed, Zintl-Klemm scheme. Electric resistivity, specific heat, magnetization, and magnetic susceptibility as a function of temperature indicate for both compounds a metallic-like behavior. For Nd2Pd3Ge5, two low-temperature phase transitions are detected, leading to an antiferromagnetic ground state.

Th7 Fe3 -Type Related Structures in Pd(Pt)-Cu-B Systems: Pd6 CuB3 -A New Structure Type for Borides.

A new member of the series of Th7 Fe3 -type derivative structures, h-(Pd0.86 Cu0.14 )7 B3 (≡Pd6.02 Cu0.98 B3 , unique structure type Pd6 CuB3 , space group P63 cm, a=12.9426(9) Å, c=4.8697(4) Å, single-crystal X-ray diffraction (XRD) data) was obtained from as cast alloys and alloys annealed at 600-650 °C. Further substitution of Cu by Pd led to formation of a Mn7 C3 -type structure, o-(Pd0.93 Cu0.07 )7 B3 (≡Pd6.51 Cu0.49 B3 , space group Pnma, a=4.8971(2) Å, b=7.5353(3) Å, c=12.9743(6) Å, single-crystal XRD). Isotypic LT h-(Pt0.70 Cu0.30 )7 B3 (≡Pt4.90 Cu2.10 B3 ) was observed in the Pt-Cu-B system as a low-temperature (LT) phase (T≤600 °C) (powder XRD), whereas the Th7 Fe3 -type (high-temperature (HT) h-(Pt0.73 Cu0.27 )7 B3 ≡Pt5.11 Cu1.89 B3 , space group P63 mc, a=7.4671(1) Å, c=4.9039(1) Å, powder XRD) proved to be stable at high temperature. The three structures are built of columns of face connected metal octahedra and columns of metal tetrahedra alternatingly fused by common faces and vertices. Boron atoms are found in trigonal prisms formed by metal atoms. The volumes of the three new Th7 Fe3 -type derivative borides relate as 1:2:3. Superconductivity was discovered for Pt4.9 Cu2.1 B3 (Pd6 CuB3 -type) and Pt5.1 Cu1.9 B3 (Th7 Fe3 -type) below 0.67 and 0.66 K, respectively. Despite the close value of the transition temperature the values of the upper critical field at 0 K differ as 0.37 T and 0.27 T for the two compounds.

Yb9+xCuMg4-x (x = 0.034): A κ-Phase Formed by Lanthanoids.

Atom order in the crystal structures of Yb2Cu2-xMg (x = 0.17; Mo2FeB2-type; P4/mbm; a = 0.75592(2) nm; c = 0.40282(1) nm) and Yb9+xCuMg4-x (x = 0.034; Hf9Mo4B-type; P63/mmc; a = 1.0169(5) nm; c = 1.0290(5) nm) was determined from powder and X-ray single-crystal counter data analyses supported by electron probe microanalyses. Among the group of the so-called κ-phases, Yb9+xCuMg4-x is the first representative formed by a lanthanoid element. The structure of this κ-phase can be viewed as a typical network of corner-connected empty Yb6-octahedra, which encompass Yb6Mg6-icosahedra (filled by a mix of Mg/Yb atoms) and Yb6-trigonal prisms centered by Cu atoms to complete the three-dimensional metal framework. From another point of view, the same structure is considered as built from infinite polyicosahedral columns of Yb9Mg4 composition with Cu atoms located in trigonal prismatic interstices, highlighting similarities with other Yb-rich Yb-Cu-Mg phases. Density functional theory (DFT) calculations classify Yb9CuMg4 as a polar intermetallic. Metallic-like behavior is inferred from the Sommerfeld constant, γ = 49.2 mJ/mol·K(2), derived from the electronic density of states, calculated at the Fermi level. DFT integration of the f-density of states indicates almost completely filled f-states, revealing 13.6 and 13.7 electrons in the valence band for Yb1 and Yb2 atoms, respectively, close to the Yb(2+) ground state ((1)S0) for both Yb atoms. Magnetic susceptibility data recorded on the same compound are consistent with a nonmagnetic divalent Yb(2+) state. Temperature-dependent heat capacity data display a metallic behavior characterized by a small Sommerfeld constant γ = 64.8 mJ/mol·K(2) and a rather low Debye temperature ΘD = 140 K as typical for soft materials.

Cage compound Sc5Pt24B12: a Pt-stuffed variant of filled skutterudite structure. Electronic and structural properties.

The title compound was obtained from elements via arc melting and its crystal structure was determined from single-crystal X-ray diffraction data (space group Im3̄, a = 10.2042(6) Å). The refinement indicated the occupancy of icosahedral 2a and cubooctahedral 8c sites solely by Sc atoms which leads to the composition Sc5Pt24B12 in contrast to the previously reported ternary stannides of Gd3Ni8Sn16 type (RE5-xM12Sn24(+x) compounds). The compound is the first representative of borides crystallizing with a site exchange variant of this stannide structure type. The structural relationships of the boride structure and filled skutterudite LaFe4P12vs. the Remeika phase of Yb3Rh4Sn13-type are discussed. Analysis of chemical bonding classifies Sc5Pt24B12 as a cage compound exhibiting the ionic interaction of cationic scandium species in the cages of anionic framework, formed by covalently bonded B and Pt atoms. Electronic structure calculations show that the electronic states of atoms centered around the cubooctahedral 8c site, i.e. Sc2 3d-, Pt2 5d- and B 2p-states dominate the density of states (DOS) at the Fermi level EF. Strong effect of spin-orbit coupling on the band structure at the gamma point has been found from density functional theory calculations. Sc5Pt24B12 exhibits superconductivity with a transition temperature of TC = 2.45 K.

Crystal structure of novel Ni-Zn borides: first observation of a boron-metal nested cage unit: B20Ni6.

The crystal structures of three ternary Ni-Zn borides have been elucidated by means of X-ray single-crystal diffraction (XSC) and X-ray powder diffraction techniques (XPD) in combination with electron microprobe analyses (EMPA) defining the Ni/Zn ratio. Ni(21)Zn(2)B(24) crystallizes in a unique structure type (space group I4/mmm; a = 0.72103(1) nm and c = 1.42842(5) nm; R(F)(2) = 0.017), which contains characteristic isolated cages of B(20) units composed of two corrugated octogonal boron rings, which are linked at four positions via boron atoms. The B(20) units appear to have eight-membered rings on all six faces like the faces of a cube. Each face is centered by a nickel atom. The six nickel atoms are arranged in the form of an octahedron nested within the B(20) unit. Such a boron aggregation is unique and has never been encountered before in metal-boron chemistry. The crystal structure of Ni(12)ZnB(8-x) (x = 0.43; space group Cmca, a = 1.05270(2) nm, b = 1.45236(3) nm, c = 1.45537(3) nm; R(F)(2) = 0.028) adopts the structure type of Ni(12)AlB(8) with finite zigzag chains of five boron atoms. The compound Ni(3)ZnB(2) crystallizes in a unique structure type (space group C2/m, a = 0.95101(4) nm, b = 0.28921(4) nm, c = 0.84366(3) nm, ß = 101.097(3)°, and R(F)(2) = 0.020) characterized by B(4) zigzag chain fragments with B-B bond lengths of 0.183-0.185 nm. The Ni(3)ZnB(2) structure is related to the Dy(3)Ni(2) type.

Boron induced structure modifications in Pd-Cu-B system: new Ti2Ni-type derivative borides Pd3Cu3B and Pd5Cu5B2.

The formation of two distinct derivative structures of Ti2Ni-type, interstitial Pd3Cu3B and substitutive Pd5Cu5B2, has been elucidated in Pd-Cu-B alloys from analysis of X-ray single crystal and powder diffraction data and supported by SEM. The metal atom arrangement in the new boride Pd3Cu3B (space group Fd3m, W3Fe3C-type structure, a = 1.1136(3) nm) follows the pattern of atom distribution in the CdNi-type structure. Pd5Cu5B2 (space group F(4)3m, a = 1.05273(5) nm) exhibits a non-centrosymmetric substitutive derivative of the Ti2Ni-type structure. The reduction of symmetry on passing from Ti2Ni-type structure to Pd5Cu5B2 corresponds to the loss of an inversion centre delivered by an ordered occupation of the Ni position (32e) by dissimilar atoms, Cu and B. In both structures, the boron atom centers Pd forming [BPd6] octahedra in Pd3Cu3B and [BPd6] trigonal prisms in Pd5Cu5B2. Neither a perceptible homogeneity range nor mutual solid solubility was observed for two compounds at 600 °C, while in as cast conditions Pd5Cu5B2 exhibits an extended homogeneity range formed by a partial substitution of Cu atoms (in 24f) by Pd (Pd5+xCu5-xB2, 0 ≤x≤ 1). Electrical resistivity measurements performed on Pd3Cu3B as well as on Pd-poor and Pd-rich termini of Pd5+xCu5-xB2 annealed at 600 °C and in as cast conditions respectively demonstrated the absence of any phase transitions for this compounds in the temperature region from 0.3 K to 300 K.