Closed-loop recycling of polyethylene-like materials.

Plastics are key components of almost any technology today. Although their production consumes substantial feedstock resources, plastics are largely disposed of after their service life. In terms of a circular economy1-8, reuse of post-consumer sorted polymers ('mechanical recycling') is hampered by deterioration of materials performance9,10. Chemical recycling1,11 via depolymerization to monomer offers an alternative that retains high-performance properties. The linear hydrocarbon chains of polyethylene12 enable crystalline packing and provide excellent materials properties13. Their inert nature hinders chemical recycling, however, necessitating temperatures above 600 degrees Celsius and recovering ethylene with a yield of less than 10 per cent3,11,14. Here we show that renewable polycarbonates and polyesters with a low density of in-chain functional groups as break points in a polyethylene chain can be recycled chemically by solvolysis with a recovery rate of more than 96 per cent. At the same time, the break points do not disturb the crystalline polyethylene structure, and the desirable materials properties (like those of high-density polyethylene) are fully retained upon recycling. Processing can be performed by common injection moulding and the materials are well-suited for additive manufacturing, such as 3D printing. Selective removal from model polymer waste streams is possible. In our approach, the initial polymers result from polycondensation of long-chain building blocks, derived by state-of-the-art catalytic schemes from common plant oil feedstocks, or microalgae oils15. This allows closed-loop recycling of polyethylene-like materials.

Degradable and Recyclable Polyesters from Multiple Chain Length Bio- and Waste-Sourceable Monomers.

Monomers sourced from waste or biomass are often mixtures of different chain lengths; e.g. catalytic oxidation of polyethylene waste yields mixtures of dicarboxylic acids (DCAs). Yet, polyesters synthesized from such monomer mixtures have rarely been studied. We report polyesters based on multiple linear aliphatic DCAs, present in chain length distributions that vary in their centers and ranges. We demonstrate that these materials can adopt high-density polyethylene-like solid state structures, and are ductile (e.g. Et 610 MPa), allowing for injection molding, or film and fiber extrusion. Melting and crystallization points of the polyesters show no odd-even effects as dipoles cannot favorably align in the crystal, similar to traditional odd carbon numbered, long-chain DCA polyesters. Biodegradation studies of 13 C-labelled polyesters in soil reveal rapid mineralization, and depolymerization by methanolysis indicates suitability for closed-loop recycling.