Functionalizing DNA Origami by Triplex-Directed Site-Specific Photo-Cross-Linking.

Here, we present a cross-linking approach to covalently functionalize and stabilize DNA origami structures in a one-pot reaction. Our strategy involves adding nucleotide sequences to adjacent staple strands, so that, upon assembly of the origami structure, the extensions form short hairpin duplexes targetable by psoralen-labeled triplex-forming oligonucleotides bearing other functional groups (pso-TFOs). Subsequent irradiation with UVA light generates psoralen adducts with one or both hairpin staples leading to site-specific attachment of the pso-TFO (and attached group) to the origami with ca. 80% efficiency. Bis-adduct formation between strands in proximal hairpins further tethers the TFO to the structure and generates "superstaples" that improve the structural integrity of the functionalized complex. We show that directing cross-linking to regions outside of the origami core dramatically reduces sensitivity of the structures to thermal denaturation and disassembly by T7 RNA polymerase. We also show that the underlying duplex regions of the origami core are digested by DNase I and thus remain accessible to read-out by DNA-binding proteins. Our strategy is scalable and cost-effective, as it works with existing DNA origami structures, does not require scaffold redesign, and can be achieved with just one psoralen-modified oligonucleotide.

The Formation and Displacement of Ordered DNA Triplexes in Self-Assembled Three-Dimensional DNA Crystals.

Reconfigurable structures engineered through DNA hybridization and self-assembly offer both structural and dynamic applications in nanotechnology. Here, we have demonstrated that strand displacement of triplex-forming oligonucleotides (TFOs) can be translated to a robust macroscopic DNA crystal by coloring the crystals with covalently attached fluorescent dyes. We show that three different types of triplex strand displacement are feasible within the DNA crystals and the bound TFOs can be removed and/or replaced by (a) changing the pH from 5 to 7, (b) the addition of the Watson-Crick complement to a TFO containing a short toehold, and (c) the addition of a longer TFO that uses the duplex edge as a toehold. We have also proved by X-ray diffraction that the structure of the crystals remains as designed in the presence of the TFOs.

Triplex-forming properties and enzymatic incorporation of a base-modified nucleotide capable of duplex DNA recognition at neutral pH.

The sequence-specific recognition of duplex DNA by unmodified parallel triplex-forming oligonucleotides is restricted to low pH conditions due to a necessity for cytosine protonation in the third strand. This has severely restricted their use as gene-targeting agents, as well as for the detection and/or functionalisation of synthetic or genomic DNA. Here I report that the nucleobase 6-amino-5-nitropyridin-2-one (Z) finally overcomes this constraint by acting as an uncharged mimic of protonated cytosine. Synthetic TFOs containing the nucleobase enabled stable and selective triplex formation at oligopurine-oligopyrimidine sequences containing multiple isolated or contiguous GC base pairs at neutral pH and above. Moreover, I demonstrate a universal strategy for the enzymatic assembly of Z-containing TFOs using its commercially available deoxyribonucleotide triphosphate. These findings seek to improve not only the recognition properties of TFOs but also the cost and/or expertise associated with their chemical syntheses.

Triplex-forming oligonucleotides: a third strand for DNA nanotechnology.

DNA self-assembly has proved to be a useful bottom-up strategy for the construction of user-defined nanoscale objects, lattices and devices. The design of these structures has largely relied on exploiting simple base pairing rules and the formation of double-helical domains as secondary structural elements. However, other helical forms involving specific non-canonical base-base interactions have introduced a novel paradigm into the process of engineering with DNA. The most notable of these is a three-stranded complex generated by the binding of a third strand within the duplex major groove, generating a triple-helical ('triplex') structure. The sequence, structural and assembly requirements that differentiate triplexes from their duplex counterparts has allowed the design of nanostructures for both dynamic and/or structural purposes, as well as a means to target non-nucleic acid components to precise locations within a nanostructure scaffold. Here, we review the properties of triplexes that have proved useful in the engineering of DNA nanostructures, with an emphasis on applications that hitherto have not been possible by duplex formation alone.

Sequence-specific recognition of DNA nanostructures.

DNA is the most exploited biopolymer for the programmed self-assembly of objects and devices that exhibit nanoscale-sized features. One of the most useful properties of DNA nanostructures is their ability to be functionalized with additional non-nucleic acid components. The introduction of such a component is often achieved by attaching it to an oligonucleotide that is part of the nanostructure, or hybridizing it to single-stranded overhangs that extend beyond or above the nanostructure surface. However, restrictions in nanostructure design and/or the self-assembly process can limit the suitability of these procedures. An alternative strategy is to couple the component to a DNA recognition agent that is capable of binding to duplex sequences within the nanostructure. This offers the advantage that it requires little, if any, alteration to the nanostructure and can be achieved after structure assembly. In addition, since the molecular recognition of DNA can be controlled by varying pH and ionic conditions, such systems offer tunable properties that are distinct from simple Watson-Crick hybridization. Here, we describe methodology that has been used to exploit and characterize the sequence-specific recognition of DNA nanostructures, with the aim of generating functional assemblies for bionanotechnology and synthetic biology applications.

DNA looping by FokI: the impact of twisting and bending rigidity on protein-induced looping dynamics.

Protein-induced DNA looping is crucial for many genetic processes such as transcription, gene regulation and DNA replication. Here, we use tethered-particle motion to examine the impact of DNA bending and twisting rigidity on loop capture and release, using the restriction endonuclease FokI as a test system. To cleave DNA efficiently, FokI bridges two copies of an asymmetric sequence, invariably aligning the sites in parallel. On account of the fixed alignment, the topology of the DNA loop is set by the orientation of the sites along the DNA. We show that both the separation of the FokI sites and their orientation, altering, respectively, the twisting and the bending of the DNA needed to juxtapose the sites, have profound effects on the dynamics of the looping interaction. Surprisingly, the presence of a nick within the loop does not affect the observed rigidity of the DNA. In contrast, the introduction of a 4-nt gap fully relaxes all of the torque present in the system but does not necessarily enhance loop stability. FokI therefore employs torque to stabilise its DNA-looping interaction by acting as a 'torsional' catch bond.

DNA looping by FokI: the impact of synapse geometry on loop topology at varied site orientations.

Most restriction endonucleases, including FokI, interact with two copies of their recognition sequence before cutting DNA. On DNA with two sites they act in cis looping out the intervening DNA. While many restriction enzymes operate symmetrically at palindromic sites, FokI acts asymmetrically at a non-palindromic site. The directionality of its sequence means that two FokI sites can be bridged in either parallel or anti-parallel alignments. Here we show by biochemical and single-molecule biophysical methods that FokI aligns two recognition sites on separate DNA molecules in parallel and that the parallel arrangement holds for sites in the same DNA regardless of whether they are in inverted or repeated orientations. The parallel arrangement dictates the topology of the loop trapped between sites in cis: the loop from inverted sites has a simple 180° bend, while that with repeated sites has a convoluted 360° turn. The ability of FokI to act at asymmetric sites thus enabled us to identify the synapse geometry for sites in trans and in cis, which in turn revealed the relationship between synapse geometry and loop topology.

Functionalizing designer DNA crystals with a triple-helical veneer.

DNA is a very useful molecule for the programmed self-assembly of 2D and 3D nanoscale objects.1 The design of these structures exploits Watson-Crick hybridization and strand exchange to stitch linear duplexes into finite assemblies.2-4 The dimensions of these complexes can be increased by over five orders of magnitude through self-assembly of cohesive single-stranded segments (sticky ends).5, 6 Methods that exploit the sequence addressability of DNA nanostructures will enable the programmable positioning of components in 2D and 3D space, offering applications such as the organization of nanoelectronics,7 the direction of biological cascades,8 and the structure determination of periodically positioned molecules by X-ray diffraction.9 To this end we present a macroscopic 3D crystal based on the 3-fold rotationally symmetric tensegrity triangle3, 6 that can be functionalized by a triplex-forming oligonucleotide on each of its helical edges.

Fluorous-Directed Assembly of DNA Origami Nanostructures.

An orthogonal, noncovalent approach to direct the assembly of higher-order DNA origami nanostructures is described. By incorporating perfluorinated tags into the edges of DNA origami tiles we control their hierarchical assembly via fluorous-directed recognition. When we combine this approach with Watson-Crick base-pairing we form discrete dimeric constructs in significantly higher yield (8x) than when either molecular recognition method is used in isolation. This integrated "catch-and-latch" approach, which combines the strength and mobility of the fluorous effect with the specificity of base-pairing, provides an additional toolset for DNA nanotechnology, one that enables increased assembly efficiency while requiring significantly fewer DNA sequences. As a result, our integration of fluorous-directed assembly into origami systems represents a cheap, atom-efficient means to produce discrete superstructures.

The reaction mechanism of FokI excludes the possibility of targeting zinc finger nucleases to unique DNA sites.

The FokI endonuclease is a monomeric protein with discrete DNA-recognition and catalytic domains. The latter has only one active site so, to cut both strands, the catalytic domains from two monomers associate to form a dimer. The dimer involving a monomer at the recognition site and another from free solution is less stable than that from two proteins tethered to the same DNA. FokI thus cleaves DNA with two sites better than one-site DNA. The two sites can be immediately adjacent, but they can alternatively be many hundreds of base pairs apart, in either inverted or repeated orientations. The catalytic domain of FokI is often a component of zinc finger nucleases. Typically, the zinc finger domains of two such nucleases are designed to recognize two neighbouring DNA sequences, with the objective of cutting the DNA exclusively between the target sequences. However, this strategy fails to take account of the fact that the catalytic domains of FokI can dimerize across distant sites or even at a solitary site. Additional copies of either target sequence elsewhere in the chromosome must elicit off-target cleavages.

DNA triplex formation with 5-dimethylaminopropargyl deoxyuridine.

We have prepared triplex-forming oligonucleotides containing the nucleotide analogue 5-dimethylaminopropargyl deoxyuridine (DMAPdU) in place of thymidine and examined their ability to form intermolecular triple helices by thermal melting and DNase I footprinting studies. The results were compared with those for oligonucleotides containing 5-aminopropargyl-dU (APdU), 5-guanidinopropargyl-dU (GPdU) and 5-propynyl dU (PdU). We find that DMAPdU enhances triplex stability relative to T, though slightly less than the other analogues that bear positive charges (T << PdU < DMAPdU < APdU < GPdU). For oligonucleotides that contain multiple substitutions with DMAPdU dispersed residues are more effective than clustered combinations. DMAPdU will be especially useful as a nucleotide analogue as, unlike APdU and GPdU, the base does not require protection during oligonucleotide synthesis and it can therefore be used with other derivatives that require mild deprotection conditions.

DNA Structural Changes Induced by Intermolecular Triple Helix Formation.

DNase I footprints of intermolecular DNA triplexes are often accompanied by enhanced cleavage at the 3'-end of the target site at the triplex-duplex junction. We have systematically studied the sequence dependence of this effect by examining oligonucleotide binding to sites flanked by each base in turn. For complexes with a terminal T.AT triplet, the greatest enhancement is seen with ApC, followed by ApG and ApT, with the weakest enhancement at ApA. Similar DNase I enhancements were observed for a triplex with a terminal C+.GC triplet, though with little difference between the different GpN sites. Enhanced reactivity to diethylpyrocarbonate was observed at As that flank the triplex-duplex junction at AAA or AAC but not AAG or AAT. Fluorescence melting experiments demonstrated that the flanking base affected the stability with a 4 °C difference in T m between a flanking C and G. Sequences that produced the strongest enhancement correlated with those having the lower thermal stability. These results are interpreted in terms of oligonucleotide-induced changes in DNA structure and/or flexibility.

Stability of the different arms of a DNA tetrahedron and its interaction with a minor groove ligand.

DNA strands can be designed to assemble into stable three-dimensional structures, based on Watson-Crick base pairing rules. The simplest of these is the DNA tetrahedron that is composed of four oligonucleotides. We have re-designed the sequence of a DNA tetrahedron so that it contains a single (AATT) binding site for the minor groove binding ligand Hoechst 33258. We examined the stability of this structure by placing fluorescent groups within each of its edges and have shown that all the edges melt at the same temperature in the absence of the ligand. The minor groove ligand still binds to its recognition sequence within the tetrahedron and increases the melting temperature of the folded complex. This ligand-induced stabilisation is propagated into the adjacent helical arms and the tetrahedron melts as a single entity in a cooperative fashion.

DNA binding by analogues of the bifunctional intercalator TANDEM.

We have used DNase I footprinting to study the binding strength and DNA sequence selectivity of novel derivatives of the quinoxaline bis-intercalator TANDEM. Replacing the valine residues in the cyclic octadepsipeptide with lysines does not affect the selectivity for TpA but leads to a 50-fold increase in affinity. In contrast, replacing both of the quinoxaline chromophores with naphthalene rings abolishes binding, while changing a single ring decreases the affinity, and footprints are observed at only the best binding sites (especially TATATA). By using fragments with different lengths of [(AT) n ], we demonstrate that these ligands bind best to the center of the longer (AT) n tracts.

Four base recognition by triplex-forming oligonucleotides at physiological pH.

We have achieved recognition of all 4 bp by triple helix formation at physiological pH, using triplex-forming oligonucleotides that contain four different synthetic nucleotides. BAU [2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine] recognizes AT base pairs with high affinity, (Me)P (3-methyl-2 aminopyridine) binds to GC at higher pHs than cytosine, while (A)PP (6-(3-aminopropyl)-7-methyl-3H-pyrrolo[2,3-d]pyrimidin-2(7H)-one) and S [N-(4-(3-acetamidophenyl)thiazol-2-yl-acetamide)] bind to CG and TA base pairs, respectively. Fluorescence melting and DNase I footprinting demonstrate successful triplex formation at a 19mer oligopurine sequence that contains two CG and two TA interruptions. The complexes are pH dependent, but are still stable at pH 7.0. BAU, (Me)P and (A)PP retain considerable selectivity, and single base pair changes opposite these residues cause a large reduction in affinity. In contrast, S is less selective and tolerates CG pairs as well as TA.

DNA triple-helix formation at target sites containing duplex mismatches.

We have studied the formation of DNA triple helices at target sites that contain mismatches in the duplex target. Fluorescence melting studies were used to examine a series of parallel triple helices that contain all 64 N.XZ triplet combinations at the centre (where N, X and Z are each of the four natural DNA bases in turn). Similar experiments were also performed with N=bis-amino-U (BAU) (for stable recognition of AT base pairs) and N=S (for recognition of TA inversions). We find that the introduction of a duplex mismatch destabilises the C+.GZ, T.AZ and G.TZ triplets. A similar effect is seen with BAU.AZ triplets. In contrast, other base combinations, based on non-standard triplets such as C.AZ, T.TZ, G.CZ and A.CZ are stabilised by the presence of a duplex mismatch. In each case S binds to sites containing duplex mismatches better than the corresponding Watson-Crick base pairs.

Selectivity and affinity of triplex-forming oligonucleotides containing 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine for recognizing AT base pairs in duplex DNA.

We have used DNase I footprinting, fluorescence and ultraviolet (UV) melting experiments and circular dichroism to demonstrate that, in the parallel triplex binding motif, 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine (bis-amino-U, BAU) has very high affinity for AT relative to all other Watson-Crick base pairs in DNA. Complexes containing two or more substitutions with this nucleotide analogue are stable at pH 7.0, even though they contain several C.GC base triplets. These modified triplex-forming oligonucleotides retain exquisite sequence specificity, with enhanced discrimination against YR base pairs (especially CG). These properties make BAU a useful base analogue for the sequence-specific creation of stable triple helices at pH 7.0.

Stabilisation of self-assembled DNA crystals by triplex-directed photo-cross-linking.

The tensegrity triangle is a robust DNA motif that can self-assemble to generate macroscopic three-dimensional crystals. However, the stability of these crystals is dependent on the high ionic conditions used for crystal growth. Here we demonstrate that a triplex-forming oligonucleotide can be used to direct the specific intercalation, and subsequent photo-cross-linking, of 4,5',8-trimethylpsoralen to single or multiple loci within or between the tiles of the crystal. Cross-linking between the tiles of the crystal improves their thermal stability. Such an approach is likely to facilitate the removal of crystals from their mother liquor and may prove useful for applications that require greater crystal stability.

Combining nucleoside analogues to achieve recognition of oligopurine tracts by triplex-forming oligonucleotides at physiological pH.

We have used DNase I footprinting to examine DNA triple helix formation at a 12 base pair oligopurine.oligopyrimidine sequence, using oligonucleotides that contain combinations of 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine (bis-amino-U, BAU) and 3-methyl-2-aminopyridine (MeP) in place of T and C, respectively. This combination acts cooperatively to enable high affinity triple helix formation at physiological pH. The affinity depends on the number of substitutions and their arrangement; oligonucleotides in which these analogues are evenly distributed throughout the third strand bind much better than those in which they are clustered together.

Recognition of CG inversions in DNA triple helices by methylated 3H-pyrrolo[2,3-d]pyrimidin-2(7H)-one nucleoside analogues.

Substituted 3H-pyrrolo[2,3-d]pyrimidin-2(7H)-one nucleoside analogues have been synthesised from 5-alkynyl-uridine derivatives, incorporated into triplex forming oligonucleotides (TFOs) and found to selectively bind CG inversions with enhanced affinity compared to T.