A facile method for the preparation of monodisperse beads with uniform pore sizes for cell culture.

This paper describes a facile method for the preparation of porous gelatin beads with uniform pore sizes using a simple fluidic device and their application as supporting materials for cell culture. An aqueous gelatin droplet containing many uniform toluene droplets, produced in the fluidic device, is dropped into liquid nitrogen for instant freezing and the small toluene droplets evolve into pores in the gelatin beads after removal of toluene and then freeze-drying. The porous gelatin beads exhibit a uniform pore size and monodisperse diameter as well as large open pores at the surface. Fluorescence microscopy images of fibroblast-loaded gelatin beads confirm the attachment and proliferation of the cells throughout the porous gelatin beads.

Continuous production of lipid nanoparticles by multiple-splitting in microfluidic devices with chaotic microfibrous channels.

Polydimethylsiloxane (PDMS) microfluidic devices with chaotic microfibrous channels were fabricated for the continuous production of lipid nanoparticles (LNPs). Electrospun poly(ε-caprolactone) (PCL) microfibrous matrices with different diameters (3.6 ± 0.3, 6.3 ± 0.4, and 12.2 ± 0.8 µm) were used as a template to develop microfibrous channels. The lipid solution (in ethanol) and water phase were introduced into the microfluidic device as the discontinuous and continuous phases, respectively. The smaller diameter of microfibrous channels and the higher flow rate of the continuous phase resulted in the smaller LNPs with a narrower size distribution. The multiple-splitting of the discontinuous phase and the microscale contact between the two phases in the microfibrous channels were the key features of the LNP production in our approach. The LNPs containing doxorubicin with different average sizes (89.7 ± 35.1 and 190.4 ± 66.4 nm) were prepared using the microfluidic devices for the potential application in tumor therapy. In vitro study revealed higher cellular uptake efficiency and cytotoxicity of the smaller LNPs, especially in the HepG2 cells. The microfluidic devices with microfibrous channels can be widely used as a continuous and high-throughput platform for the production of LNPs containing various active agents.

Polyaniline-grafted nanodiamonds for efficient photothermal tumor therapy.

Polyaniline-grafted nanodiamond (PAN-ND) nanoparticles were fabricated by polymerizing aniline at the surface of amine-modified NDs for efficient photothermal therapy (PTT). A series of PAN from different aniline concentrations were also prepared to compare the properties and the efficiency of PTT. The polymerization rate of aniline was faster in the presence of NDs than that of aniline alone. Compared to PAN nanoparticles, PAN-ND has a spherical shape, smaller size, and ultimately higher cellular uptake efficiency. The temperature of aqueous PAN-ND dispersion increased to 44.4 °C after laser irradiation for 5 min. In addition, the UV absorbance intensity of PAN-ND increased at the lower pH at the near infrared (NIR) region, resulting in an enhanced photothermal effect at a tumor site. Notably, the viability of HeLa cells treated with PAN-ND decreased by less than 20%, suggesting the high efficiency of PTT. The PAN-ND can be a potential candidate for efficient photothermal tumor therapy.

Fabrication of blue-fluorescent nanodiamonds modified with alkyl isocyanate for cellular bioimaging.

This paper describes the fabrication of water-dispersible nanodiamond (ND) clusters with blue fluorescence for cellular bioimaging. Poly(ethylene glycol) carboxyl methyl acid (mPEG-COOH) and alkyl isocyanates with different chain lengths were conjugated onto the surface of the ND clusters for water dispersibility and fluorescence via carbodiimide chemistry. The relative fluorescence intensity was increased with the increases in the chain length of alkyl isocyanate and also their conjugated concentration. The ND clusters (average size of 37.6 nm and zeta potential of 26.6 mV) with mPEG-COOH and octadecyl isocyanate (ODI) emitted relatively higher blue fluorescence intensity under excitation at 350 nm as well as favorable water dispersibility. After cellular uptake of the ND clusters, blue fluorescence inside the cells was confirmed by confocal laser scanning microscopy. The ND clusters conjugated with mPEG-COOH and ODI can potentially be used for cellular bioimaging.

Fabrication and optimization of Nanodiamonds-composited poly(ε-caprolactone) fibrous matrices for potential regeneration of hard tissues.

BACKGROUND: Electrospun fibrous matrices are of great importance for tissue engineering and drug delivery device. However, relatively low mechanical strength of the fibrous matrix is one of the major disadvantages. NDs with a positive charge were selected to enhance the mechanical property of a composited fibrous matrix by inducing the intermolecular interaction between NDs and polymer chain. We prepared ND-composited poly (ε-caprolactone) (PCL) fibrous matrices by electrospinning and evaluated their performance in terms of mechanical strength and cell behaviors. METHODS: A predetermined amounts of NDs (0.5, 1, 2 and 3 wt%) were added into PCL solution in a mixture of chloroform and 2,2,2-trifluoroethanol (8:2). ND-composited PCL (ND/PCL) fibrous matrices were prepared by electrospinning method. The tensile properties of the ND/PCL fibrous matrices were analyzed by using a universal testing machine. Mouse calvaria-derived preosteoblast (MC3T3-E1) was used for cell proliferation, alkaline phosphatase (ALP) assay, and Alizarin Red S staining. RESULTS: The diameters of the fibrous matrices were adjusted to approximately 1.8 µm by changing process variables. The intermolecular interaction between NDs and PCL polymers resulted in the increased tensile strength and the favorable interfacial adhesion in the ND/PCL fibrous matrices. The ND/PCL fibrous matrix with 1 wt% of ND had the highest tensile strength among the samples and also improved proliferation and differentiation of MC3T3-E1 cells. CONCLUSIONS: Compared to the other samples, the ND/PCL fibrous matrix with 1 wt% of ND concentration exhibited superior performances for MC3T3 cells. The ND/PCL fibrous matrix can be potentially used for bone and dental tissue engineering.

Photodynamic and photothermal tumor therapy using phase-change material nanoparticles containing chlorin e6 and nanodiamonds.

This paper describes the fabrication and evaluation of phase-change material (PCM) nanoparticles containing chlorin e6 (Ce6) and nanodiamonds (NDs) for photodynamic and photothermal approaches for tumor therapy, respectively. The temperature of the PCM nanoparticles containing NDs (ND/PCM, 0.5mg/mL in water) is increased to 45°C during laser exposure for 5min. The singlet oxygen generation intensity of PCM nanoparticles containing Ce6 and NDs (Ce6/ND/PCM) is gradually increased with respect to the laser exposure time. Also, the release of Ce6 from Ce6/ND/PCM can be controlled in an on-and-off manner using laser. Cell ablation tests reveal that Ce6/ND/PCM greatly ablates KB cells upon laser exposure, which is attributed to both the temperature increase in the media and singlet oxygen generation by the released Ce6. In an animal model, tumor volume is notably reduced over time after the intratumoral injection of Ce6/ND/PCM and subsequent laser exposure with a higher efficiency compared to ND/PCM. The Ce6/ND/PCM can be a promising nanomedicine for tumor therapy.

Targeted Tumor Therapy Based on Nanodiamonds Decorated with Doxorubicin and Folic Acid.

The fabrication of nanodiamond (ND)-based drug carriers for tumor-targeted drug delivery is described. The ND clusters with an average size of 52.84 nm are fabricated using a simple fluidic device combined with a precipitation method and then conjugated with folic acid (FA) and doxorubicin (Dox) via carbodiimide chemistry to obtain FA/Dox-modified ND (FA/Dox-ND) clusters. Cell culture experiments revealed that KB (folate receptor-positive) cells are preferentially ablated by FA/Dox-ND clusters compared to A549 (folate receptor-negative) cells. In vivo results revealed that FA/Dox-ND clusters are specifically accumulated in tumor tissues after intravenous injection into tumor-bearing mice, effectively reducing the volume of tumor. Based on these results, this study suggests that FA/Dox-ND clusters can be a good candidate as tumor-targeted nanovehicles for delivery of antitumor drug.

Bone-targeted delivery of nanodiamond-based drug carriers conjugated with alendronate for potential osteoporosis treatment.

This paper describes the design of alendronate-conjugated nanodiamonds (Alen-NDs) and evaluation of their feasibility for bone-targeted delivery. Alen-NDs exhibited a high affinity to hydroxyapatite (HAp, the mineral component of bone) due to the presence of Alen. Unlike NDs (without Alen), Alen-NDs were preferentially taken up by MC3T3-E1 osteoblast-like cells, compared to NIH3T3 and HepG2 cells, suggesting their cellular specificity. In addition, NDs itself increased ALP activity of MC3T3-E1 cells, compared to control group (osteogenic medium) and Alen-NDs exhibited more enhanced ALP activity. In addition, an in vivo study revealed that Alen-NDs effectively accumulated in bone tissues after intravenous tail vein injection. These results confirm the superior properties of Alen-NDs with advantages of high HAp affinity, specific uptake for MC3T3-E1 cells, positive synergistic effect for ALP activity, and in vivo bone targeting ability. The Alen-NDs can potentially be employed for osteoporosis treatment by delivering both NDs and Alen to bone tissue.

Cellular Uptake Behavior of Doxorubicin-Conjugated Nanodiamond Clusters for Efficient Cancer Therapy.

This paper describes the design and fabrication of doxorubicin (Dox)-conjugated nanodiamond (ND) clusters with controlled sizes and cellular uptake behaviors of free Dox and Dox-conjugated ND clusters. The ND clusters with an average size of 45.84 nm exhibited a higher amount of cellular uptake as compared to the ND clusters with larger sizes. The amount of Dox taken up as free Dox increased initially and then decreased over time. In contrast, the amount of Dox taken up as Dox-ND clusters continuously increased and reached a plateau, resulting in high ablation efficiency. At the same Dox concentration, the cell viabilities after treatment with free Dox and Dox-ND clusters were 26.38 and 5.31%, respectively. The Dox-ND clusters potentially could be employed as efficient drug carriers for efficient cancer therapy.

Uniform tricalcium phosphate beads with an open porous structure for tissue engineering.

Uniform tricalcium phosphate (TCP) porous beads with micro and macro pore sizes were fabricated using a simple fluidic device. For micro-porous TCP beads, an aqueous gelatin mixture containing TCP powder was introduced as the discontinuous phase into the fluidic device, where a toluene phase served as the continuous phase. The resulting aqueous TCP droplets were instantly frozen at -20°C and freeze-dried, followed by calcination at 1200°C. An oil-in-water-in-oil (O/W/O) emulsion templating method was employed to fabricate macro-porous TCP beads. An oil-in-water (O/W) emulsion was introduced into the fluidic device as the discontinuous phase with all other experimental conditions the same as for the micro-porous TCP beads. Uniform macro-porous TCP beads with a highly porous structure were finally obtained after freeze-drying and calcination. Large pore size and good interconnectivity of the macro-porous TCP beads were confirmed by scanning electron microscopy and porosimetry. In addition, penetration of host tissue into the macro-pores of the TCP beads was demonstrated by subcutaneously implanting the two types of porous TCP beads into mice and histologically analyzing stained sections at 1-4 weeks post implantation. The macro-porous TCP beads with a highly open porous structure could potentially be used as an injectable material for bone tissue engineering.