Spring-Assisted Surgery of Unilambdoid Craniosynostosis.

Craniosynostosis is traditionally treated with extensive cranial vault reconstructions (CVRs). Although less invasive techniques, such as endoscopic strip craniectomy with postoperative helmet therapy, have been successful, they also present difficulties. An alternative method is distraction osteogenesis using either manually controlled devices or specially designed springs. In this study, the authors provide the first comparison of spring-assisted surgery (SAS) with CVR for the treatment of unilambdoid synostosis (ULS). Fourteen consecutive patients (8 CVR and 6 SAS) treated for ULS at Sahlgrenska University Hospital between 2005 and 2018 were included. Skull shape and deviations were evaluated using previously defined measurement points on 3-dimensional computed tomography scans preoperatively, at spring removal, and at 3 years of age. Posterior and middle cranial fossa (PCF and MCF, respectively), skull-base cant, facial twist, and mastoid bulge (MB) were measured, and clinical data were obtained from chart reviews. The results indicated that at the 3-year follow-up, PCF, MCF, and MB improved in both groups, with no significant difference in outcome observed between methods. In the SAS group, duration of operation [61±27 min (mean±SD)] and perioperative bleeding (3.5±2.8 mL/kg body weight) were both significantly lower relative to the CVR group (P<0.05). These findings showed that both SAS and CVR resulted in similar improvements in treating ULS, although neither produced complete normalization of skull shape. The results suggest that early diagnosis and operation allow less extensive SAS to be performed without adversely affecting the results.

Correction of Unicoronal Synostosis With Springs: Two Patients With Improved Facial Symmetry.

OBJECTIVE: Surgical correction of unicoronal synostosis (UCS) entails extensive cranioplasties which do not address facial scoliosis. This paper presents the first results with springs that motivated the shift from extensive cranioplasties to dynamic techniques for surgical correction of UCS. METHODS: Two cases of UCS were operated with a linear osteotomy combined with springs. The deviation in facial symmetry (orbital dystopia angle) and skull base angles were measured on pre and postoperative computed tomography scans until 3 years of age. RESULTS: The facial scoliosis was corrected. At spring removal, the orbital dystopia angle had gone from a 9.2 to 13.2-degree deviation preoperatively to a 0.5 to 0.9-degree overcorrection compared with the ideal 0-degree deviation. Also, the skull base deviation improved. CONCLUSION: Linear osteotomy combined with springs corrects the facial scoliosis in UCS. These cases indicate that dynamic methods may be beneficial for improving the results of surgical correction of UCS.

Characterization of Human Medullary Thyroid Carcinoma Glycosphingolipids Identifies Potential Cancer Markers.

Medullary thyroid carcinoma (MTC) accounts for only 1-2% of thyroid cancers; however, metastatic MTC is a mortal disease with no cure. In this study, glycosphingolipids were isolated from human MTCs and characterized by mass spectrometry and binding of carbohydrate recognizing ligands. The tissue distribution of selected compounds was investigated by immunohistochemistry. The amount of acid glycosphingolipids in the MTCs was higher than in the normal thyroid glands. The major acid glycosphingolipid was the GD3 ganglioside. Sulfatide and the gangliosides GM3 and GD1a were also present. The majority of the complex non-acid glycosphingolipids had type 2 (Galß4GlcNAc) core chains, i.e., the neolactotetraosylceramide, the Lex, H type 2 and x2 pentaosylceramides, the Ley and A type 2 hexaosylceramides, and the A type 2 heptaosylceramide. There were also compounds with globo (GalαGalß4Glc) core, i.e., globotriaosylceramide, globotetraosylceramide, the Forssman pentaosylceramide, and the Globo H hexaosylceramide. Immunohistochemistry demonstrated an extensive expression av Ley in the MTC cells and also a variable intensity and prevalence of Globo H and Lex. One individual with multiple endocrine neoplasia type 2B expressed the Forssman determinant, which is rarely found in humans. This study of human MTC glycosphingolipids identifies glycans that could serve as potential tumor-specific markers.

Characterization of Glycosphingolipids in the Human Parathyroid and Thyroid Glands.

As part of a systematic investigation of the glycosphingolipids in human tissues, acid and non-acid glycosphingolipids from human thyroid and parathyroid glands were isolated and characterized with mass spectrometry and binding of carbohydrate-recognizing ligands, with a focus on complex compounds. The glycosphingolipid patterns of the human parathyroid and thyroid glands were very similar. The major acid glycosphingolipids were sulfatide and the gangliosides GM3, GD3, GD1a, GD1b, GT1b and Neu5Ac-neolactotetraosylceramide, and the major non-acid glycosphingolipids were globotriaosylceramide and globoside. We also found neolactotetra- and neolactohexaosylceramide, the x2 glycosphingolipid, and complex glycosphingolipids with terminal blood group O and A determinants in both tissues. A glycosphingolipid with blood group Leb determinant was identified in the thyroid gland, and the parathyroid sample had a glycosphingolipid with terminal blood group B determinant. Immunohistochemistry demonstrated the expression of blood group A antigens in both the thyroid and parathyroid glands. A weak cytoplasmatic expression of the GD1a ganglioside was present in the thyroid, while the parathyroid gland had a strong GD1a expression on the cell surface. Thus, the glycosylation of human thyroid and parathyroid glands is more complex than previously appreciated. Our findings provide a platform for further studies of alterations of cell surface glycosphingolipids in thyroid and parathyroid cancers.

Craniosynostosis: A Reversible Pathology?

The formation of the cranial sutures, in utero, occurs when the ossification of the skull bones reaches predestined positions around gestational week 15 to 20. Craniosynostosis, and the consequent skull shape deformities, is treated with surgery including osteotomies of the fused sutures. The occasional appearance of a new suture in the osteotomy lines has previously been described as sporadic events. In this retrospective study, a 4-year consecutive series of osteotomies combined with springs for craniosynostosis were systematically analysed regarding the appearance of neosutures. In total, 84 patients were included and in 16 patients (19%) a new radiologically normal suture appeared in a part of the suture that was completely closed preoperatively. Additionally, in 7 patients (8%) a new suture appeared in a part of the suture that had a discernible suture prior to surgery.In conclusion, in this consecutive and well-defined patient cohort operated for craniosynostosis, the formation of a neosuture is not a rare, and speculatively not a random, event. The appearance of a new suture long after the normal time period for suture formation in utero indicates that the craniosynostosis may just as well be caused by disturbed formation of the suture as actual premature closure.

Comparison of the glycosphingolipids of human-induced pluripotent stem cells and human embryonic stem cells.

High expectations are held for human-induced pluripotent stem cells (hiPSC) since they are established from autologous tissues thus overcoming the risk of allogeneic immune rejection when used in regenerative medicine. However, little is known regarding the cell-surface carbohydrate antigen profile of hiPSC compared with human embryonic stem cells (hESC). Here, glycosphingolipids were isolated from an adipocyte-derived hiPSC line, and hiPSC and hESC glycosphingolipids were compared by concurrent characterization by binding assays with carbohydrate-recognizing ligands and mass spectrometry. A high similarity between the nonacid glycosphingolipids of hiPSC and hESC was found. The nonacid glycosphingolipids P1 pentaosylceramide, x2 pentaosylceramide and H type 1 heptaosylceramide, not previously described in human pluripotent stem cells (hPSC), were characterized in both hiPSC and hESC. The composition of acid glycosphingolipids differed, with increased levels of GM3 ganglioside, and reduced levels of GD1a/GD1b in hiPSC when compared with hESC. In addition, the hESC glycosphingolipids sulf-globopentaosylceramide and sialyl-globotetraosylceramide were lacking in hiPSC. Neural stem cells differentiating from hiPSC had a reduced expression of sialyl-lactotetra, whereas expression of the GD1a ganglioside was significantly increased. Thus, while sialyl-lactotetra is a marker of undifferentiated hPSC, GD1a is a novel marker of neural differentiation.

Glycosphingolipids of human embryonic stem cells.

The application of human stem cell technology offers theoretically a great potential to treat various human diseases. However, to achieve this goal a large number of scientific issues remain to be solved. Cell surface carbohydrate antigens are involved in a number of biomedical phenomena that are important in clinical applications of stem cells, such as cell differentiation and immune reactivity. Due to their cell surface localization, carbohydrate epitopes are ideally suited for characterization of human pluripotent stem cells. Amongst the most commonly used markers to identify human pluripotent stem cells are the globo-series glycosphingolipids SSEA-3 and SSEA-4. However, our knowledge regarding human pluripotent stem cell glycosphingolipid expression was until recently mainly based on immunological assays of intact cells due to the very limited amounts of cell material available. In recent years the knowledge regarding glycosphingolipids in human embryonic stem cells has been extended by biochemical studies, which is the focus of this review. In addition, the distribution of the human pluripotent stem cell glycosphingolipids in human tissues, and glycosphingolipid changes during human stem cell differentiation, are discussed.

Sialyl-lactotetra, a novel cell surface marker of undifferentiated human pluripotent stem cells.

Cell surface glycoconjugates are used as markers for undifferentiated pluripotent stem cells. Here, antibody binding and mass spectrometry characterization of acid glycosphingolipids isolated from a large number (1 × 10(9) cells) of human embryonic stem cell (hESC) lines allowed identification of several novel acid glycosphingolipids, like the gangliosides sialyl-lactotetraosylceramide and sialyl-globotetraosylceramide, and the sulfated glycosphingolipids sulfatide, sulf-lactosylceramide, and sulf-globopentaosylceramide. A high cell surface expression of sialyl-lactotetra on hESC and human induced pluripotent stem cells (hiPSC) was demonstrated by flow cytometry, immunohistochemistry, and electron microscopy, whereas sulfated glycosphingolipids were only found in intracellular compartments. Immunohistochemistry showed distinct cell surface anti-sialyl-lactotetra staining on all seven hESC lines and three hiPSC lines analyzed, whereas no staining of hESC-derived hepatocyte-like or cardiomyocyte-like cells was obtained. Upon differentiation of hiPSC into hepatocyte-like cells, the sialyl-lactotetra epitope was rapidly down-regulated and not detectable after 14 days. These findings identify sialyl-lactotetra as a promising marker of undifferentiated human pluripotent stem cells.

Improved Facial and Skull-Base Symmetry following Osteotomy and Distraction of Unilateral Coronal Synostosis.

BACKGROUND: Unilateral coronal synostosis (UCS) results in a surgically demanding deformation, as the deformity is asymmetric in the calvaria but also presents with facial scoliosis and orbital dystopia. Traditional cranioplasties correct the forehead but have little effect on the face and orbits. In this article, the authors describe a consecutive series of patients operated on for UCS with osteotomy of the fused suture combined with distraction osteogenesis. METHODS: Fourteen patients (mean age, 8.0 months; range, 4.3 to 16.6 months) were included in this study. The authors measured and compared the orbital dystopia angle, anterior cranial fossa deviation, and anterior cranial fossa cant between preoperative computed tomography results and those at distractor removal. RESULTS: Blood loss was 6.1 mL/kg (range, 2.0 to 15.2 mL/kg), and length of stay was 4.4 days (range, 3.0 to 6.0 days). The authors observed significant improvements in the median orbital dystopia angle from 9.8 degrees (95% CI, 7.0 to 12.6 degrees) to 1.1 degrees (95% CI, -1.5 to 3.7 degrees) ( P < 0.001), anterior cranial fossa deviation from 12.9 degrees (95% CI, 9.2 to 16.6 degrees) to 4.7 degrees (95% CI, 1.5 to 7.9 degrees) ( P < 0.001), and anterior cranial fossa cant from 2.5 degrees (95% CI, 1.5 to 3.5 degrees) to 1.7 degrees (95% CI, 0.0 to 3.4 degrees) ( P = 0.003). CONCLUSIONS: Osteotomy combined with a distractor for UCS straightened the face and relieved orbital dystopia by affecting the nose angle relative to the orbits, correcting the deviation of the cranial base in the anterior fossa, and lowering the orbit on the affected side. Furthermore, this technique demonstrated a favorable morbidity profile with low perioperative bleeding and a short inpatient period, suggesting its potential to improve the surgical treatment of UCS. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Autologous endothelialisation by the stromal vascular fraction on laminin-bioconjugated nanocellulose-alginate scaffolds.

Establishing a vascular network in biofabricated tissue grafts is essential for ensuring graft survival. Such networks are dependent on the ability of the scaffold material to facilitate endothelial cell adhesion; however, the clinical translation potential of tissue-engineered scaffolds is hindered by the lack of available autologous sources of vascular cells. Here, we present a novel approach to achieving autologous endothelialisation in nanocellulose-based scaffolds by using adipose tissue-derived vascular cells on nanocellulose-based scaffolds. We used sodium periodate-mediated bioconjugation to covalently bind laminin to the scaffold surface and isolated the stromal vascular fraction and endothelial progenitor cells (EPCs; CD31+CD45-) from human lipoaspirate. Additionally, we assessed the adhesive capacity of scaffold bioconjugationin vitrousing both adipose tissue-derived cell populations and human umbilical vein endothelial cells. The results showed that the bioconjugated scaffold exhibited remarkably higher cell viability and scaffold surface coverage by adhesion regardless of cell type, whereas control groups comprising cells on non-bioconjugated scaffolds exhibited minimal cell adhesion across all cell types. Furthermore, on culture day 3, EPCs seeded on laminin-bioconjugated scaffolds showed positive immunofluorescence staining for the endothelial markers CD31 and CD34, suggesting that the scaffolds promoted progenitor differentiation into mature endothelial cells. These findings present a possible strategy for generating autologous vasculature and thereby increase the clinical relevance of 3D-bioprinted nanocellulose-based constructs.

Injectable In Situ Crosslinking Hydrogel for Autologous Fat Grafting.

Autologous fat grafting is hampered by unpredictable outcomes due to high tissue resorption. Hydrogels based on enzymatically pretreated tunicate nanocellulose (ETC) and alginate (ALG) are biocompatible, safe, and present physiochemical properties capable of promoting cell survival. Here, we compared in situ and ex situ crosslinking of ETC/ALG hydrogels combined with lipoaspirate human adipose tissue (LAT) to generate an injectable formulation capable of retaining dimensional stability in vivo. We performed in situ crosslinking using two different approaches; inducing Ca2+ release from CaCO3 microparticles (CMPs) and physiologically available Ca2+ in vivo. Additionally, we generated ex situ-crosslinked, 3D-bioprinted hydrogel-fat grafts. We found that in vitro optimization generated a CMP-crosslinking system with comparable stiffness to ex situ-crosslinked gels. Comparison of outcomes following in vivo injection of each respective crosslinked hydrogel revealed that after 30 days, in situ crosslinking generated fat grafts with less shape retention than 3D-bioprinted constructs that had undergone ex situ crosslinking. However, CMP addition improved fat-cell distribution and cell survival relative to grafts dependent on physiological Ca2+ alone. These findings suggested that in situ crosslinking using CMP might promote the dimensional stability of injectable fat-hydrogel grafts, although 3D bioprinting with ex situ crosslinking more effectively ensured proper shape stability in vivo.

Long-term in vivo survival of 3D-bioprinted human lipoaspirate-derived adipose tissue: proteomic signature and cellular content.

Three-dimensional (3D)-bioprinted lipoaspirate-derived adipose tissue (LAT) is a potential alternative to lipo-injection for correcting soft-tissue defects. This study investigated the long-term in vivo survival of 3D-bioprinted LAT and its proteomic signature and cellular composition. We performed proteomic and multicolour flow cytometric analyses on the lipoaspirate and 3D-bioprinted LAT constructs were transplanted into nude mice, followed by explantation after up to 150 days. LAT contained adipose-tissue-derived stem cells (ASCs), pericytes, endothelial progenitor cells (EPCs) and endothelial cells. Proteomic analysis identified 6,067 proteins, including pericyte markers, adipokines, ASC secretome proteins, proangiogenic proteins and proteins involved in adipocyte differentiation and developmental morphogenic signalling, as well as proteins not previously described in human subcutaneous fat. 3D-bioprinted LAT survived for 150 days in vivo with preservation of the construct shape and size. Furthermore, we identified human blood vessels after 30 and 150 days in vivo, indicating angiogenesis from capillaries. These results showed that LAT has a favourable proteomic signature, contains ASCs, EPCs and blood vessels that survive 3D bioprinting and can potentially facilitate angiogenesis and successful autologous fat grafting in soft-tissue reconstruction.

Biomaterial and biocompatibility evaluation of tunicate nanocellulose for tissue engineering.

Extracellular matrix fibril components, such as collagen, are crucial for the structural properties of several tissues and organs. Tunicate-derived cellulose nanofibrils (TNC) combined with living cells could become the next gold standard for cartilage and soft-tissue repair, as TNC fibrils present similar dimensions to collagen, feasible industrial production, and chemically straightforward and cost-efficient extraction procedures. In this study, we characterized the physical properties of TNC derived from aquaculture production in Norwegian fjords and evaluated its biocompatibility regarding induction of an inflammatory response and foreign-body reactions in a Wistar rat model. Additionally, histologic and immunohistochemical analyses were performed for comparison with expanded polytetrafluoroethylene (ePTFE) as a control. The average length of the TNC as determined by atomic force microscopy was tunable from 3 µm to 2.4 µm via selection of a various number of passages through a microfluidizer, and rheologic analysis showed that the TNC hydrogels were highly shear-thinning and with a viscosity dependent on fibril length and concentration. As a bioink, TNC exhibited excellent rheological and printability properties, with constructs capable of being printed with high resolution and fidelity. We found that post-print cross-linking with alginate stabilized the construct shape and texture, which increased its ease of handling during surgery. Moreover, after 30 days in vivo, the constructs showed a highly-preserved shape and fidelity of the grid holes, with these characteristics preserved after 90 days and with no signs of necrosis, infection, acute inflammation, invasion of neutrophil granulocytes, or extensive fibrosis. Furthermore, we observed a moderate foreign-body reaction involving macrophages, lymphocytes, and giant cells in both the TNC constructs and PTFE controls, although TNC was considered a non-irritant biomaterial according to ISO 10993-6 as compared with ePTFE. These findings represent a milestone for future clinical application of TNC scaffolds for tissue repair. One sentence summary: In this study, the mechanical properties of tunicate nanocellulose are superior to nanocellulose extracted from other sources, and the biocompatibility is comparable to that of ePTFE.

Vascularization of tissue engineered cartilage - Sequential in vivo MRI display functional blood circulation.

Establishing functional circulation in bioengineered tissue after implantation is vital for the delivery of oxygen and nutrients to the cells. Native cartilage is avascular and thrives on diffusion, which in turn depends on proximity to circulation. Here, we investigate whether a gridded three-dimensional (3D) bioprinted construct would allow ingrowth of blood vessels and thus prove a functional concept for vascularization of bioengineered tissue. Twenty 10 × 10 × 3-mm 3Dbioprinted nanocellulose constructs containing human nasal chondrocytes or cell-free controls were subcutaneously implanted in 20 nude mice. Over the next 3 months, the mice were sequentially imaged with a 7 T small-animal MRI system, and the diffusion and perfusion parameters were analyzed. The chondrocytes survived and proliferated, and the shape of the constructs was well preserved. The diffusion coefficient was high and well preserved over time. The perfusion and diffusion patterns shown by MRI suggested that blood vessels develop over time in the 3D bioprinted constructs; the vessels were confirmed by histology and immunohistochemistry. We conclude that 3D bioprinted tissue with a gridded structure allows ingrowth of blood vessels and has the potential to be vascularized from the host. This is an essential step to take bioengineered tissue from the bench to clinical practice.

Long-term in vivo integrity and safety of 3D-bioprinted cartilaginous constructs.

Long-term stability and biological safety are crucial for translation of 3D-bioprinting technology into clinical applications. Here, we addressed the long-term safety and stability issues associated with 3D-bioprinted constructs comprising a cellulose scaffold and human cells (chondrocytes and stem cells) over a period of 10 months in nude mice. Our findings showed that increasing unconfined compression strength over time significantly improved the mechanical stability of the cell-containing constructs relative to cell-free scaffolds. Additionally, the cell-free constructs exhibited a mean compressive stress and stiffness (compressive modulus) of 0.04 ± 0.05 MPa and 0.14 ± 0.18 MPa, respectively, whereas these values for the cell-containing constructs were 0.11 ± 0.08 MPa (p = .019) and 0.53 ± 0.59 MPa (p = .012), respectively. Moreover, histomorphologic analysis revealed that cartilage formed from the cell-containing constructs harbored an abundance of proliferating chondrocytes in clusters, and after 10 months, resembled native cartilage. Furthermore, extension of the experiment over the complete lifecycle of the animal model revealed no signs of ossification, fibrosis, necrosis, or implant-related tumor development in the 3D-bioprinted constructs. These findings confirm the in vivo biological safety and mechanical stability of 3D-bioprinted cartilaginous tissues and support their potential translation into clinical applications.

The effect of hemodilution on free flap survival: A systematic review of clinical and experimental studies.

BACKGROUND: Acute normovolemic hemodilution (ANH) has been proposed as a microsurgical technique to improve blood flow in free flaps. OBJECTIVE: Here, we present the first systematic review of clinical and experimental studies on the effect of ANH. METHODS: We performed a systematic literature search of PubMed, Medline, the Cochrane Library, Google Scholar, and ClinicalTrials.gov using search strategies and a review process in agreement with the PRISMA statement and the Cochrane Handbook for systematic reviews of interventions. PICO criteria were defined before bibliometric processing of the retrieved articles, which were analyzed with the SYRCLE RoB tool for risk of bias and the GRADE scale for level of evidence. RESULTS: We retrieved 74 articles from the literature search, and after processing according to PICO criteria, only four articles remained, all of which were experimental. The rating for risk of bias was uncertain according to SYRCLE RoB results, and the level of evidence was low according to GRADE evaluation. CONCLUSIONS: There is no clinical evidence for the effect of ANH on microcirculation in free flaps, and experimental studies provide weak evidence supporting the use of hemodilution in reconstructive microsurgery.

Characterization of glycosphingolipids from gastrointestinal stromal tumours.

Gastrointestinal stromal tumours (GISTs) are the major nonepithelial neoplasms of the human gastrointestinal tract with a worldwide incidence between 11 and 15 per million cases annually. In this study the acid and non-acid glycosphingolipids of three GISTs were characterized using a combination of thin-layer chromatography, chemical staining, binding of carbohydrate recognizing ligands, and mass spectrometry. In the non-acid glycosphingolipid fractions of the tumors globotetraosylceramide, neolactotetraosylceramide, and glycosphingolipids with terminal blood group A, B, H, Lex, Lea, Ley and Leb determinants were found. The relative amounts of these non-acid compounds were different in the three tumour samples. The acid glycosphingolipid fractions had sulfatide, and the gangliosides GM3, GD3, GM1, Neu5Acα3neolactotetraosylceramide, GD1a, GT1b and GQ1b. In summary, we have characterized the glycosphingolipids of GISTs and found that the pattern differs in tumours from different individuals. This detailed characterization of glycosphingolipid composition of GISTs could contribute to recognition of new molecular targets for GIST treatment and sub-classification.

Glycosphingolipids Recognized by Acinetobacter baumannii.

Acinetobacter baumannii is an opportunistic bacterial pathogen associated with hospital-acquired infections, including pneumonia, meningitis, bacteremia, urinary tract infection, and wound infections. Recognition of host cell surface carbohydrates plays a crucial role in adhesion and enables microbes to colonize different host niches. Here the potential glycosphingolipid receptors of A. baumannii were examined by binding of 35S-labeled bacteria to glycosphingolipids on thin-layer chromatograms. Thereby a selective interaction with two non-acid glycosphingolipids of human and rabbit small intestine was found. The binding-active glycosphingolipids were isolated and, on the basis of mass spectrometry, identified as neolactotetraosylceramide (Galß4GlcNAcß3Galß4Glcß1Cer) and lactotetraosylceramide (Galß3GlcNAcß3Galß4Glcß1Cer). Further binding assays using reference glycosphingolipids showed that A. baumannii also bound to lactotriaosylceramide (GlcNAcß3Galß4Glcß1Cer) demonstrating that GlcNAc was the basic element recognized. In addition, the bacteria occasionally bound to galactosylceramide, lactosylceramide with phytosphingosine and/or hydroxy fatty acids, isoglobotriaosylceramide, gangliotriaosylceramide, and gangliotetraosylceramide, in analogy with binding patterns that previously have been described for other bacteria classified as "lactosylceramide-binding". Finally, by isolation and characterization of glycosphingolipids from human skin, the presence of neolactotetraosylceramide was demonstrated in this A. baumannii target tissue.

Skin Grafting on 3D Bioprinted Cartilage Constructs In Vivo.

BACKGROUND: Three-dimensional (3D) bioprinting of cartilage is a promising new technique. To produce, for example, an auricle with good shape, the printed cartilage needs to be covered with skin that can grow on the surface of the construct. Our primary question was to analyze if an integrated 3D bioprinted cartilage structure is a tissue that can serve as a bed for a full-thickness skin graft. METHODS: 3D bioprinted constructs (10 × 10 × 1.2 mm) were printed using nanofibrillated cellulose/alginate bioink mixed with mesenchymal stem cells and adult chondrocytes and implanted subcutaneously in 21 nude mice. RESULTS: After 45 days, a full-thickness skin allograft was transplanted onto the constructs and the grafted construct again enclosed subcutaneously. Group 1 was sacrificed on day 60, whereas group 2, instead, had their skin-bearing construct uncovered on day 60 and were sacrificed on day 75 and the explants were analyzed morphologically. The skin transplants integrated well with the 3D bioprinted constructs. A tight connection between the fibrous, vascularized capsule surrounding the 3D bioprinted constructs and the skin graft were observed. The skin grafts survived the uncovering and exposure to the environment. CONCLUSIONS: A 3D bioprinted cartilage that has been allowed to integrate in vivo is a sufficient base for a full-thickness skin graft. This finding accentuates the clinical potential of 3D bioprinting for reconstructive purposes.

HLA and Histo-Blood Group Antigen Expression in Human Pluripotent Stem Cells and their Derivatives.

One prerequisite for a successful clinical outcome of human pluripotent stem cell (hPSC) based therapies is immune compatibility between grafted cells/tissue and recipient. This study explores immune determinants of human embryonic stem cell lines (hESC) and induced human pluripotent stem cell (hiPSC) lines and hepatocyte- and cardiomyocyte-like cells derived from these cells. HLA class I was expressed on all pluripotent hPSC lines which upon differentiation into hepatocyte-like cells was considerably reduced in contrast to cardiomyocyte-like cells which retained class I antigens. No HLA class II antigens were found in the pluripotent or differentiated cells. Histo-blood group carbohydrate antigens SSEA-3/SSEA-4/SSEA-5, Globo H, A, Lex/Ley and sialyl-lactotetra were expressed on all hPSC lines. Blood group AB(O)H antigen expression was in accordance with ABO genotype. Interestingly, only a subpopulation of A1O1 cells expressed A. During differentiation of hPSC, some histo-blood group antigens showed congruent alteration patterns while expression of other antigens differed between the cell lines. No systematic difference in the hPSC cell surface tissue antigen expression was detected. In conclusion, hPSC and their derivatives express cell surface antigens that may cause an immune rejection. Furthermore, tissue antigen expression must be established for each individual stem cell line prior to clinical application.