Resilient Consensus Control Design for DC Microgrids against False Data Injection Attacks Using a Distributed Bank of Sliding Mode Observers.

This paper investigates the problem of false data injection attack (FDIA) detection in microgrids. The grid under study is a DC microgrid with distributed boost converters, where the false data are injected into the voltage data so as to investigate the effect of attacks. The proposed algorithm uses a bank of sliding mode observers that estimates the states of the neighbor agents. Each agent estimates the neighboring states and, according to the estimation and communication data, the detection mechanism reveals the presence of FDIA. The proposed control scheme provides resiliency to the system by replacing the conventional consensus rule with attack-resilient ones. In order to evaluate the efficiency of the proposed method, a real-time simulation with eight agents has been performed. Moreover, a verification experimental test with three boost converters has been utilized to confirm the simulation results. It is shown that the proposed algorithm is able to detect FDI attacks and it protects the consensus deviation against FDI attacks.

Generative Adversarial Network-Based Scheme for Diagnosing Faults in Cyber-Physical Power Systems.

This paper presents a novel diagnostic framework for distributed power systems that is based on using generative adversarial networks for generating artificial knockoffs in the power grid. The proposed framework makes use of the raw data measurements including voltage, frequency, and phase-angle that are collected from each bus in the cyber-physical power systems. The collected measurements are firstly fed into a feature selection module, where multiple state-of-the-art techniques have been used to extract the most informative features from the initial set of available features. The selected features are inputs to a knockoff generation module, where the generative adversarial networks are employed to generate the corresponding knockoffs of the selected features. The generated knockoffs are then fed into a classification module, in which two different classification models are used for the sake of fault diagnosis. Multiple experiments have been designed to investigate the effect of noise, fault resistance value, and sampling rate on the performance of the proposed framework. The effectiveness of the proposed framework is validated through a comprehensive study on the IEEE 118-bus system.

Applying Computer Models to Realize Closed-Loop Neonatal Oxygen Therapy.

BACKGROUND: Within the context of automating neonatal oxygen therapy, this article describes the transformation of an idea verified by a computer model into a device actuated by a computer model. Computer modeling of an entire neonatal oxygen therapy system can facilitate the development of closed-loop control algorithms by providing a verification platform and speeding up algorithm development. METHODS: In this article, we present a method of mathematically modeling the system's components: the oxygen transport within the patient, the oxygen blender, the controller, and the pulse oximeter. Furthermore, within the constraints of engineering a product, an idealized model of the neonatal oxygen transport component may be integrated effectively into the control algorithm of a device, referred to as the adaptive model. Manual and closed-loop oxygen therapy performance were defined in this article by 3 criteria in the following order of importance: percent duration of SpO2 spent in normoxemia (target SpO2 ± 2.5%), hypoxemia (less than normoxemia), and hyperoxemia (more than normoxemia); number of 60-second periods <85% SpO2 and >95% SpO2; and number of manual adjustments. RESULTS: Results from a clinical evaluation that compared the performance of 3 closed-loop control algorithms (state machine, proportional-integral-differential, and adaptive model) with manual oxygen therapy on 7 low-birth-weight ventilated preterm babies, are presented. Compared with manual therapy, all closed-loop control algorithms significantly increased the patients' duration in normoxemia and reduced hyperoxemia (P < 0.05). The number of manual adjustments was also significantly reduced by all of the closed-loop control algorithms (P < 0.05). CONCLUSIONS: Although the performance of the 3 control algorithms was equivalent, it is suggested that the adaptive model, with its ease of use, may have the best utility.

Fault-tolerant control design for unreliable networked control systems via constrained model predictive control.

This work deals with the problem of passive fault-tolerant control (FTC) for discrete-time networked control systems (NCSs). Network imperfections such as random time delay and packet dropout are modeled as a Markov chain that results in a Markovian jump linear system (MJLS). Some of the elements in the transition probability matrix (TPM) are supposed to be unknown so as to address network complexities. In addition, a comprehensive and practical fault model that considers the stochastic nature of networks is employed. By utilizing this fault model, the closed-loop NCS model is obtained by means of state augmentation technique. Then, a constrained model predictive control (MPC) is proposed to develop a fault-tolerant control strategy in which all these issues are considered as well as input constraint. Sufficient conditions to design the proposed reliable controller are derived in terms of linear matrix inequalities (LMIs). Finally, two examples are utilized to demonstrate the validity of the proposed FTC. The simulation results show that the proposed strategy works well, and results in more effective responses compared to state-of-the-arts studies.

Resilient Finite-Time Consensus Tracking for Nonholonomic High-Order Chained-Form Systems Against DoS Attacks.

This article studies the resilient finite-time consensus tracking problem for high-order nonholonomic chained-form systems against denial-of-service (DoS) attacks. The first step is to develop a novel secure distributed observer for each follower in which the tangent hyperbolic function is used to accelerate the convergence speed of the observer by inducing a high-gain effect. The paralyzed-connectivity graphs resulting from DoS attacks are repaired to the initially connected graphs by integrating both acknowledgment-based attack detection techniques and the communication recovery process. In addition, it is demonstrated that the duration of DoS attacks directly affects the convergence time of the proposed scheme. Then, a fast finite-time backstepping control (FFTBC) algorithm is established for each follower to track the estimated leader's information, ensuring fast convergence performance regardless of whether the follower states are near or far from the equilibrium point. An approximation-based approach is also presented for reducing the conservatism of the upper estimate of the settling time. An evaluation of the proposed control algorithm under DoS attacks is conducted using a group of wheeled mobile robots.

DLIN: Deep Ladder Imputation Network.

Many efforts have been dedicated to addressing data loss in various domains. While task-specific solutions may eliminate the respective issue in certain applications, finding a generic method for missing data estimation is rather complex. In this regard, this article proposes a novel missing data imputation algorithm, which has supreme generalization ability for a vast variety of applications. Making use of both complete and incomplete parts of data, the proposed algorithm reduces the effect of missing ratio, which makes it suitable for situations with very high missing ratios. In addition, this feature enables model construction on incomplete training sets, which is rarely addressed in the literature. Moreover, the nonparametric nature of this new algorithm brings about supreme flexibility against all variations of missing values and data distribution. We incorporate the advantages of denoising autoencoders and ladder architecture into a novel formulation based on deep neural networks. To evaluate the proposed algorithm, a comparative study is performed using a number of reputable imputation techniques. In this process, real-world benchmark datasets from different domains are selected. On top of that, a real cyber-physical system is also evaluated to study the generalization ability of the proposed algorithm for distinct applications. To do so, we conduct studies based on three missing data mechanisms, namely: 1) missing completely at random; 2) missing at random; and 3) missing not at random. The attained results indicate the superiority of the proposed method in these experiments.

Input-output slope curve estimation in neural stimulation based on optimal sampling principles.

This paper discusses some of the practical limitations and issues, which exist for the input-output (IO) slope curve estimation (SCE) in neural, brain and spinal, stimulation techniques. The drawbacks of the SCE techniques by using existing uniform sampling and Fisher-information-based optimal IO curve estimation (FO-IOCE) methods are elaborated. A novel IO SCE technique is proposed with a modified sampling strategy and stopping rule which improve the SCE performance compared to these methods. The effectiveness of the proposed IO SCE is tested on 1000 simulation runs in transcranial magnetic stimulation (TMS), with a realistic model of motor evoked potentials. The results show that the proposed IO SCE method successfully satisfies the stopping rule, before reaching the maximum number of TMS pulses in 79.5% of runs, while the estimation based on the uniform sampling technique never converges and satisfies the stopping rule. At the time of successful termination, the proposed IO SCE method decreases the 95th percentile (mean value in the parentheses) of the absolute relative estimation errors (AREs) of the slope curve parameters up to 7.45% (2.2%), with only 18 additional pulses on average compared to that of the FO-IOCE technique. It also decreases the 95th percentile (mean value in the parentheses) of the AREs of the IO slope curve parameters up to 59.33% (16.71%), compared to that of the uniform sampling method. The proposed IO SCE also identifies the peak slope with higher accuracy, with the 95th percentile (mean value in the parentheses) of AREs reduced by up to 9.96% (2.01%) compared to that of the FO-IOCE method, and by up to 46.29% (13.13%) compared to that of the uniform sampling method.

FMG- and RNN-Based Estimation of Motor Intention of Upper-Limb Motion in Human-Robot Collaboration.

Research on human-robot interactions has been driven by the increasing employment of robotic manipulators in manufacturing and production. Toward developing more effective human-robot collaboration during shared tasks, this paper proposes an interaction scheme by employing machine learning algorithms to interpret biosignals acquired from the human user and accordingly planning the robot reaction. More specifically, a force myography (FMG) band was wrapped around the user's forearm and was used to collect information about muscle contractions during a set of collaborative tasks between the user and an industrial robot. A recurrent neural network model was trained to estimate the user's hand movement pattern based on the collected FMG data to determine whether the performed motion was random or intended as part of the predefined collaborative tasks. Experimental evaluation during two practical collaboration scenarios demonstrated that the trained model could successfully estimate the category of hand motion, i.e., intended or random, such that the robot either assisted with performing the task or changed its course of action to avoid collision. Furthermore, proximity sensors were mounted on the robotic arm to investigate if monitoring the distance between the user and the robot had an effect on the outcome of the collaborative effort. While further investigation is required to rigorously establish the safety of the human worker, this study demonstrates the potential of FMG-based wearable technologies to enhance human-robot collaboration in industrial settings.

Complete Neuron-Astrocyte Interaction Model: Digital Multiplierless Design and Networking Mechanism.

Glial cells, also known as neuroglia or glia, are non-neuronal cells providing support and protection for neurons in the central nervous system (CNS). They also act as supportive cells in the brain. Among a variety of glial cells, the star-shaped glial cells, i.e., astrocytes, are the largest cell population in the brain. The important role of astrocyte such as neuronal synchronization, synaptic information regulation, feedback to neural activity and extracellular regulation make the astrocytes play a vital role in brain disease. This paper presents a modified complete neuron-astrocyte interaction model that is more suitable for efficient and large scale biological neural network realization on digital platforms. Simulation results show that the modified complete interaction model can reproduce biological-like behavior of the original neuron-astrocyte mechanism. The modified interaction model is investigated in terms of digital realization feasibility and cost targeting a low cost hardware implementation. Networking behavior of this interaction is investigated and compared between two cases: i) the neuron spiking mechanism without astrocyte effects, and ii) the effect of astrocyte in regulating the neurons behavior and synaptic transmission via controlling the LTP and LTD processes. Hardware implementation on FPGA shows that the modified model mimics the main mechanism of neuron-astrocyte communication with higher performance and considerably lower hardware overhead cost compared with the original interaction model.