RESUMO
In previous studies, we demonstrated the ability to linearly guide axonal regeneration using scaffolds comprised of precision microchannels 2 mm in length. In this work, we report our efforts to augment the manufacturing process to achieve clinically relevant scaffold dimensions in the centimeter-scale range. By selective etching of multi-component fiber bundles, agarose hydrogel scaffolds with highly ordered, close-packed arrays of microchannels, ranging from 172 to 320 µm, were fabricated with overall dimensions approaching clinically relevant length scales. Cross-sectional analyses determined that the maximum microchannel volume per unit volume of scaffold approached 80%, which is nearly twice that compared to our previously reported study. Statistical analyses at various points along the length of the microchannels also show a significant degree of linearity along the entire length of the scaffold. Two types of multi-component fiber bundle templates were evaluated; polystyrene and poly(methyl methacrylate). The scaffolds consisting of 2 cm long microchannels were fabricated with the poly(methyl methacrylate) fiber-cores exhibited a higher degree of linearity compared to those fabricated using polystyrene fibers. It is believed that the materials process developed in this study is useful for fabricating high aspect ratio microchannels in biocompatible materials with a wide range of geometries for guiding nerve regeneration.
Assuntos
Sistema Nervoso Central/fisiologia , Sistema Nervoso Periférico/fisiologia , Hidrogéis , Polimetil Metacrilato , Poliestirenos , SefaroseRESUMO
Alginate was studied as a degradable nerve guidance scaffold material in vitro and in vivo. In vitro degradation rates were determined using rheology to measure the change in shear modulus vs time. The shear modulus decreased from 155 kPa to 5 kPa within 2 days; however, alginate samples maintained their superficial geometry for over 28 days. The degradation behavior was supported by materials characterization data showing alginate consisted of high internal surface area (400 m2 /g), which likely facilitated the release of cross-linking cations resulting in the rapid decrease in shear modulus. To assess the degradation rate in vivo, multilumen scaffolds were fabricated using a fiber templating technique. The scaffolds were implanted in a 2-mm-long T3 full transection rodent spinal cord lesion model for 14 days. Although there was some evidence of axon guidance, in general, alginate scaffolds degraded before axons could grow over the 2-mm-long lesion. Enabling alginate-based scaffolds for nerve repair will likely require approaches to slow its degradation. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 611-619, 2016.
Assuntos
Alginatos/química , Regeneração Tecidual Guiada/métodos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Traumatismos da Medula Espinal/terapia , Alicerces Teciduais/química , Animais , Feminino , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Filamentos Intermediários/metabolismo , Nitrogênio/química , Polimetil Metacrilato/química , Porosidade , Ratos Endogâmicos F344 , Reologia , Medula Espinal/patologiaRESUMO
This work details the synthesis and characterization of a novel lithium titanate aerogel as an anode material for lithium ion batteries. Excessive loss of lithium during supercritical drying can be overcome by increasing the lithium precursor concentration during synthesis. Chronopotentiometry shows the aerogel to have a capacity about 80 % of theoretical at a symmetric C/3 rate, which is comparable to a commercial product. Cyclic voltammetry reveals a batt-cap behavior for the high-surface area aerogel, implying the potential for improved rate capability if electrical conductivity can be maintained.