Self-Assembly of Ultrasmall 3D Architectures of (l)-Acyclic Threoninol Nucleic Acids with High Thermal and Serum Stability.

The primary challenge of implementing DNA nanostructures in biomedical applications lies in their vulnerability to nuclease degradation and variations in ionic strength. Furthermore, the size minimization of DNA and RNA nanostructures is limited by the stability of the DNA and RNA duplexes. This study presents a solution to these problems through the use of acyclic (l)-threoninol nucleic acid (aTNA), an artificial acyclic nucleic acid, which offers enhanced resilience under physiological conditions. The high stability of homo aTNA duplexes enables the design of durable nanostructures with dimensions below 5 nm, previously unattainable due to the inherent instability of DNA structures. The assembly of a stable aTNA-based 3D cube and pyramid that involves an i-motif formation is demonstrated. In particular, the cube outperforms its DNA-based counterparts in terms of stability. We furthermore demonstrate the successful attachment of a nanobody to the aTNA cube using the favorable triplex formation of aTNA with ssDNA. The selective in vitro binding capability to human epidermal growth factor receptor 2 is demonstrated. The presented research presents the use of aTNA for the creation of smaller durable nanostructures for future medical applications. It also introduces a new method for attaching payloads to these structures, enhancing their utility in targeted therapies.

Reversible Protection and Targeted Delivery of DNA Origami with a Disulfide-Containing Cationic Polymer.

DNA nanostructures have considerable biomedical potential as intracellular delivery vehicles as they are highly homogeneous and can be functionalized with high spatial resolution. However, challenges like instability under physiological conditions, limited cellular uptake, and lysosomal degradation limit their use. This paper presents a bio-reducible, cationic polymer poly(cystaminebisacrylamide-1,6-diaminohexane) (PCD) as a reversible DNA origami protector. PCD displays a stronger DNA affinity than other cationic polymers. DNA nanostructures with PCD protection are shielded from low salt conditions and DNase I degradation and show a 40-fold increase in cell-association when linked to targeting antibodies. Confocal microscopy reveals a potential secondary cell uptake mechanism, directly delivering the nanostructures to the cytoplasm. Additionally, PCD can be removed by cleaving its backbone disulfides using the intracellular reductant, glutathione. Finally, the application of these constructs is demonstrated for targeted delivery of a cytotoxic agent to cancer cells, which efficiently decreases their viability. The PCD protective agent that is reported here is a simple and efficient method for the stabilization of DNA origami structures. With the ability to deprotect the DNA nanostructures upon entry of the intracellular space, the possibility for the use of DNA origami in pharmaceutical applications is enhanced.

Bioluminescence-Based Energy Transfer Using Semiconductor Quantum Dots as Acceptors.

Bioluminescence resonance energy transfer (BRET) is the non-radiative transfer of energy from a bioluminescent protein donor to a fluorophore acceptor. It shares all the formalism of Förster resonance energy transfer (FRET) but differs in one key aspect: that the excited donor here is produced by biochemical means and not by an external illumination. Often the choice of BRET source is the bioluminescent protein Renilla luciferase, which catalyzes the oxidation of a substrate, typically coelenterazine, producing an oxidized product in its electronic excited state that, in turn, couples with a proximal fluorophore resulting in a fluorescence emission from the acceptor. The acceptors pertinent to this discussion are semiconductor quantum dots (QDs), which offer some unrivalled photophysical properties. Amongst other advantages, the QD's large Stokes shift is particularly advantageous as it allows easy and accurate deconstruction of acceptor signal, which is difficult to attain using organic dyes or fluorescent proteins. QD-BRET systems are gaining popularity in non-invasive bioimaging and as probes for biosensing as they don't require external optical illumination, which dramatically improves the signal-to-noise ratio by avoiding background auto-fluorescence. Despite the additional advantages such systems offer, there are challenges lying ahead that need to be addressed before they are utilized for translational types of research.

Fluorescence quenching of quantum dots by gold nanoparticles: a potential long range spectroscopic ruler.

The dependence of quantum dot (QD) fluorescence emission on the proximity of 30 nm gold nanoparticles (AuNPs) was studied with controlled interparticle distances ranging from 15 to 70 nm. This was achieved by coassembling DNA-conjugated QDs and AuNPs in a 1:1 ratio at precise positions on a triangular-shaped DNA origami platform. A profound, long-range quenching of the photoluminescence intensity of the QDs was observed. A combination of static and time-resolved fluorescence measurements suggests that the quenching is due to an increase in the nonradiative decay rate of QD emission. Unlike FRET, the energy transfer is inversely proportional to the 2.7th power of the distance between nanoparticles with half quenching at ∼28 nm. This long-range quenching phenomena may be useful for developing extended spectroscopic rulers in the future.

3'-Oxo-, amino-, thio- and sulfone-acetic acid modified thymidines: effect of increased acidity on ribonuclease A inhibition.

A family of 3'-functionalized thymidines carrying XCH2COOH (X=O, NH, S, SO2) groups has been designed as inhibitors of RNase A. This is because it is possible to manipulate the overall acidity of this new class of nucleic 'acids' by changing X from oxygen to the SO2 group in the series. It is also expected that the acyclic nature of the XCH2COOH group would provide enough flexibility to the -COOH group to have maximum interactions with the catalytic subsite P1 of RNase A. As the -SO2CH2COOH substituted derivative showed better potency partially because of the increased acidity of the -COOH group, the inhibitory properties of both 5'-substituted and 3',5'-disubstituted sulfone acetic acid modified thymidines were investigated. Two -SO2CH2COOH groups were incorporated with the expectation of targeting two phosphate binding sites simultaneously. Thus, 3',5'-dideoxy-3',5'-bis-S-[(carboxymethyl)sulfonyl]thymidine emerged as the best inhibitor in this series with a Ki value of 25 ± 2 µM.

Folding Double-Stranded DNA into Designed Shapes with Triplex-Forming Oligonucleotides.

The compaction and organization of genomic DNA is a central mechanism in eukaryotic cells, but engineered architectural control over double-stranded DNA (dsDNA) is notably challenging. Here, long dsDNA templates are folded into designed shapes via triplex-mediated self-assembly. Triplex-forming oligonucleotides (TFOs) bind purines in dsDNA via normal or reverse Hoogsteen interactions. In the triplex origami methodology, these non-canonical interactions are programmed to compact dsDNA (linear or plasmid) into well-defined objects, which demonstrate a variety of structural features: hollow and raster-filled, single- and multi-layered, with custom curvatures and geometries, and featuring lattice-free, square-, or honeycomb-pleated internal arrangements. Surprisingly, the length of integrated and free-standing dsDNA loops can be modulated with near-perfect efficiency; from hundreds down to only six bp (2 nm). The inherent rigidity of dsDNA promotes structural robustness and non-periodic structures of almost 25.000 nt are therefore formed with fewer unique starting materials, compared to other DNA-based self-assembly methods. Densely triplexed structures also resist degradation by DNase I. Triplex-mediated dsDNA folding is methodologically straightforward and orthogonal to Watson-Crick-based methods. Moreover, it enables unprecedented spatial control over dsDNA templates.

Robust DNA-functionalized core/shell quantum dots with fluorescent emission spanning from UV-vis to near-IR and compatible with DNA-directed self-assembly.

The assembly and isolation of DNA oligonucleotide-functionalized gold nanoparticles (AuNPs) has become a well-developed technology that is based on the strong bonding interactions between gold and thiolated DNA. However, achieving DNA-functionalized semiconductor quantum dots (QDs) that are robust enough to withstand precipitation at high temperature and ionic strength through simple attachment of modified DNA to the QD surface remains a challenge. We report the synthesis of stable core/shell (1-20 monolayers) QD-DNA conjugates in which the end of the phosphorothiolated oligonucleotide (5-10 nucleotides) is "embedded" within the shell of the QD. These reliable QD-DNA conjugates exhibit excellent chemical and photonic stability, colloidal stability over a wide pH range (4-12) and at high salt concentrations (>100 mM Na(+) or Mg(2+)), bright fluorescence emission with quantum yields of up to 70%, and broad spectral tunability with emission ranging from the UV to the NIR (360-800 nm).

Aqueous synthesis of glutathione-capped CdTe/CdS/ZnS and CdTe/CdSe/ZnS core/shell/shell nanocrystal heterostructures.

Here we demonstrate the aqueous synthesis of colloidal nanocrystal heterostructures consisting of the CdTe core encapsulated by CdS/ZnS or CdSe/ZnS shells using glutathione (GSH), a tripeptide, as the capping ligand. The inner CdTe/CdS and CdTe/CdSe heterostructures have type-I, quasi-type-II, or type-II band offsets depending on the core size and shell thickness, and the outer CdS/ZnS and CdSe/ZnS structures have type-I band offsets. The emission maxima of the assembled heterostructures were found to be dependent on the CdTe core size, with a wider range of spectral tunability observed for the smaller cores. Because of encapsulation effects, the formation of successive shells resulted in a considerable increase in the photoluminescence quantum yield; however, identifying optimal shell thicknesses was required to achieve the maximum quantum yield. Photoluminescence lifetime measurements revealed that the decrease in the quantum yield of thick-shell nanocrystals was caused by a substantial decrease in the radiative rate constant. By tuning the diameter of the core and the thickness of each shell, a broad range of high quantum yield (up to 45%) nanocrystal heterostructures with emission ranging from visible to NIR wavelengths (500-730 nm) were obtained. This versatile route to engineering the optical properties of nanocrystal heterostructures will provide new opportunities for applications in bioimaging and biolabeling.

5'-Modified pyrimidine nucleosides as inhibitors of ribonuclease A.

Four 5'-deoxy-5'-nipecotic acid substituted pyrimidine nucleosides were synthesized and characterized. Their inhibitory activities towards ribonuclease A (RNase A) have been studied by enzyme kinetics and docking experiments. All inhibition constants obtained were in the sub-millimolar range. Biochemical analysis shows that the uridine derivative is more potent than the corresponding thymidine derivatives and that the inhibition is competitive in nature. For thymidine derivatives, the 3'-hydroxy group plays an important role in binding as well as in inhibition. Docking studies also support the experimental results. In the docking conformation the uridine derivative was found to bind to the P(1)P(2) subsite with the acid group within hydrogen bonding distance of the active site histidine residues.

Understanding Förster Resonance Energy Transfer in the Sheet Regime with DNA Brick-Based Dye Networks.

Controlling excitonic energy transfer at the molecular level is a key requirement for transitioning nanophotonics research to viable devices with the main inspiration coming from biological light-harvesting antennas that collect and direct light energy with near-unity efficiency using Förster resonance energy transfer (FRET). Among putative FRET processes, point-to-plane FRET between donors and acceptors arrayed in two-dimensional sheets is predicted to be particularly efficient with a theoretical 1/r4 energy transfer distance (r) dependency versus the 1/r6 dependency seen for a single donor-acceptor interaction. However, quantitative validation has been confounded by a lack of robust experimental approaches that can rigidly place dyes in the required nanoscale arrangements. To create such assemblies, we utilize a DNA brick scaffold, referred to as a DNA block, which incorporates up to five two-dimensional planes with each displaying from 1 to 12 copies of five different donor, acceptor, or intermediary relay dyes. Nanostructure characterization along with steady-state and time-resolved spectroscopic data were combined with molecular dynamics modeling and detailed numerical simulations to compare the energy transfer efficiencies observed in the experimental DNA block assemblies to theoretical expectations. Overall, we demonstrate clear signatures of sheet regime FRET, and from this we provide a better understanding of what is needed to realize the benefits of such energy transfer in artificial dye networks along with FRET-based sensing and imaging.

Nanoparticles and DNA - a powerful and growing functional combination in bionanotechnology.

Functionally integrating DNA and other nucleic acids with nanoparticles in all their different physicochemical forms has produced a rich variety of composite nanomaterials which, in many cases, display unique or augmented properties due to the synergistic activity of both components. These capabilities, in turn, are attracting greater attention from various research communities in search of new nanoscale tools for diverse applications that include (bio)sensing, labeling, targeted imaging, cellular delivery, diagnostics, therapeutics, theranostics, bioelectronics, and biocomputing to name just a few amongst many others. Here, we review this vibrant and growing research area from the perspective of the materials themselves and their unique capabilities. Inorganic nanocrystals such as quantum dots or those made from gold or other (noble) metals along with metal oxides and carbon allotropes are desired as participants in these hybrid materials since they can provide distinctive optical, physical, magnetic, and electrochemical properties. Beyond this, synthetic polymer-based and proteinaceous or viral nanoparticulate materials are also useful in the same role since they can provide a predefined and biocompatible cargo-carrying and targeting capability. The DNA component typically provides sequence-based addressability for probes along with, more recently, unique architectural properties that directly originate from the burgeoning structural DNA field. Additionally, DNA aptamers can also provide specific recognition capabilities against many diverse non-nucleic acid targets across a range of size scales from ions to full protein and cells. In addition to appending DNA to inorganic or polymeric nanoparticles, purely DNA-based nanoparticles have recently surfaced as an excellent assembly platform and have started finding application in areas like sensing, imaging and immunotherapy. We focus on selected and representative nanoparticle-DNA materials and highlight their myriad applications using examples from the literature. Overall, it is clear that this unique functional combination of nanomaterials has far more to offer than what we have seen to date and as new capabilities for each of these materials are developed, so, too, will new applications emerge.

DNA nanotechnology for nanophotonic applications.

DNA nanotechnology has touched the epitome of miniaturization by integrating various nanometer size particles with nanometer precision. This enticing bottom-up approach has employed small DNA tiles, large multi-dimensional polymeric structures or more recently DNA origami to organize nanoparticles of different inorganic materials, small organic molecules or macro-biomolecules like proteins, and RNAs into fascinating patterns that are difficult to achieve by other conventional methods. Here, we are especially interested in the self-assembly of nanomaterials that are potentially attractive elements in the burgeoning field of nanophotonics. These materials include plasmonic nanoparticles, quantum dots, fluorescent organic dyes, etc. DNA based self-assembly allows excellent control over distance, orientation and stoichiometry of these nano-elements that helps to engineer intelligent systems that can potentially pave the path for future technology. Many outstanding structures have been fabricated that are capable of fine tuning optical properties, such as fluorescence intensity and lifetime modulation, enhancement of Raman scattering and emergence of circular dichroism responses. Within the limited scope of this review we have tried to give a glimpse of the development of this still nascent but highly promising field to its current status as well as the existing challenges before us.

An enzymatically-sensitized sequential and concentric energy transfer relay self-assembled around semiconductor quantum dots.

The ability to control light energy within de novo nanoscale structures and devices will greatly benefit their continuing development and ultimate application. Ideally, this control should extend from generating the light itself to its spatial propagation within the device along with providing defined emission wavelength(s), all in a stand-alone modality. Here we design and characterize macromolecular nanoassemblies consisting of semiconductor quantum dots (QDs), several differentially dye-labeled peptides and the enzyme luciferase which cumulatively demonstrate many of these capabilities by engaging in multiple-sequential energy transfer steps. To create these structures, recombinantly-expressed luciferase and the dye-labeled peptides were appended with a terminal polyhistidine sequence allowing for controlled ratiometric self-assembly around the QDs via metal-affinity coordination. The QDs serve to provide multiple roles in these structures including as central assembly platforms or nanoscaffolds along with acting as a potent energy harvesting and transfer relay. The devices are activated by addition of coelenterazine H substrate which is oxidized by luciferase producing light energy which sensitizes the central 625 nm emitting QD acceptor by bioluminescence resonance energy transfer (BRET). The sensitized QD, in turn, acts as a relay and transfers the energy to a first peptide-labeled Alexa Fluor 647 acceptor dye displayed on its surface. This dye then transfers energy to a second red-shifted peptide-labeled dye acceptor on the QD surface through a second concentric Förster resonance energy transfer (FRET) process. Alexa Fluor 700 and Cy5.5 are both tested in the role of this terminal FRET acceptor. Photophysical analysis of spectral profiles from the resulting sequential BRET-FRET-FRET processes allow us to estimate the efficiency of each of the transfer steps. Importantly, the efficiency of each step within this energy transfer cascade can be controlled to some extent by the number of enzymes/peptides displayed on the QD. Further optimization of the energy transfer process(es) along with potential applications of such devices are finally discussed.

Infrared emitting quantum dots: DNA conjugation and DNA origami directed self-assembly.

QDs that emit in the infrared (IR) range are of special interest at the moment because of their potential as tissue imaging reagents. Due to autofluorescence from tissues, QDs that emit in the visible range fail to produce good signal to noise ratios. Here we report the production of Cd(x)Pb(1-x)Te tertiary-alloyed QDs that emit in the 1100-1300 nm wavelength range, capped with the hydrophilic ligands mercaptopropionic acid (MPA) or glutathione (GSH), together with DNA, as specific surface tags. We observed an interesting dependence of the QD emission peaks on the species of capping ligand used. ICP-MS analysis confirmed that changing the identity of the surface ligand in the reaction mixture shifted the elemental composition of the particles and resulted in different Cd/Pb ratios. Further, DNA directed assembly of the particles onto DNA nanostructures ensures that the particle remains stable in high salt conditions, which is crucial to biological applications.

Morpholino, piperidino, and pyrrolidino derivatives of pyrimidine nucleosides as inhibitors of ribonuclease A: synthesis, biochemical, and crystallographic evaluation.

Six 5'-deoxy-5'-morpholine, piperidine, and pyrrolidine of pyrimidine nucleosides have been synthesized and characterized. Their inhibitory action to ribonuclease A has been studied by biochemical analysis and X-ray crystallography. These compounds are moderate inhibitors of RNase A with mid-to-upper micromolar inhibition constants (K(i)). The high resolution X-ray crystal structures of the RNase A-inhibitor complexes have shown that all inhibitors bind at the enzyme catalytic cleft with the pyrimidine nucleobase at the B(1)R(2) subsites while the 5' group binds away from the main subsite P(1), where P-O(5') bond cleavage occurs, toward the solvent close to subsite P(0). Structure-activity relationship analysis has demonstrated that the compounds with the larger group in the 5' position are more potent. Comparative structural analysis of these RNase A complexes with other similar RNase A-ligand complexes provides a structural explanation of their potency and suggests ways to improve their efficiency and selectivity. These inhibitors can be the starting point for the development of compounds that can be used as pharmaceuticals against pathologies associated with RNase A homologues such as human angiogenin, which is implicated in tumor induced neovascularization.

The binding of 3'-N-piperidine-4-carboxyl-3'-deoxy-ara-uridine to ribonuclease A in the crystal.

The binding of a moderate inhibitor, 3'-N-piperidine-4-carboxyl-3'-deoxy-ara-uridine, to ribonuclease A has been studied by X-ray crystallography at 1.7A resolution. Two inhibitor molecules are bound in the central RNA binding cavity of RNase A exploiting interactions with residues from peripheral binding sites rather than from the active site of the enzyme. The uracyl moiety of the first inhibitor molecule occupies the purine-preferring site of RNase A, while the rest of the molecule projects to the solvent. The second inhibitor molecule binds with the carboxyl group at the pyrimidine recognition site and the uridine moiety exploits interactions with RNase A residues Lys66, His119 and Asp121. Comparative structural analysis of the 3'-N-piperidine-4-carboxyl-3'-deoxy-ara-uridine complex with other RNase A-ligand complexes provides a structural explanation of its potency. The crystal structure of the RNase A-3'-N-piperidine-4-carboxyl-3'-deoxy-ara-uridine complex provides evidence of a novel ligand-binding pattern in RNase A for 3'-N-aminonucleosides that was not anticipated by modelling studies, while it also suggests ways to improve the efficiency and selectivity of such compounds to develop pharmaceuticals against pathologies associated with RNase A homologues.