Preheating and "snow-plow" composite application technique affect double bond conversion but not bond strength to dentine.

OBJECTIVE: To measure degree of conversion (DC) of a flowable composite, microtensile bond strength (MTBS) to dentine in the snow-plow technique with/without preheating and temperature in the preheated composite. MATERIALS AND METHODS: For DC, snow-plow specimens of Filtek Ultimate Flowable (Flow) and Filtek Bulk Fill (Bulk) (3M) were prepared by light-curing composites simultaneously in standardized molds while in control groups light-curing was separate. DC of Flow was measured using micro-Raman spectroscopy. For MTBS, specimens were prepared on dentine of human extracted molars by simultaneous (snow-plow) or separate (control) light-curing. MTBS was measured using a universal testing machine after 24 h and 6 months. Data were analyzed using ANOVA with Tukey's post hoc (α = 0.05). RESULTS: Increased curing time significantly increased DC in snow-plow from 13.4% ± 11.6% (10 s) to 31.8% ± 4.4% (40 s) albeit significantly lower than controls (p < 0.05). Preheated Bulk improved conversion in snow-plow (44.3% ± 1.7%) and control (50.5% ± 2.6%) (p < 0.05). No significant differences occurred in MTBS between groups (p > 0.05). MTBS values ranged between 66.7 ± 8.4 MPa (snow-plow group_21°C_baseline) and 54.1 ± 15.8 MPa (control_21°C_long-term). Temperature in the preheated Bulk dropped to ~38°C after 30 s. CONCLUSIONS: Snow-plow technique, irrespective of preheating, resulted in lower DC of Flow than separate light-curing of composite increments. Snow-plow, irrespective of preheating, resulted in similar initial and long-term MTBS to dentine. CLINICAL SIGNIFICANCE: Clinicians with preference for flowable composite liners in Class II restorations should be aware that the snow-plow technique of simultaneous light-curing of flowable and bulk-fill composite increments affects monomer-to-polymer conversion, albeit no effect on immediate, and long-term bonding to dentine was detected. Preheating sculptable bulk-fill composite improves conversion of the flowable liner in the snow-plow technique but has no detectable effect on bond strength to dentine.

Enhanced personal protective equipment and dental students' experience and quality of a restorative procedure in a simulated clinical setting.

OBJECTIVES: To evaluate the effects of enhanced personal protective equipment (Enhanced_PPE) on student-operator's experience and restorative procedure. METHODS: Student-operators (N = 29 Year 3 dental students) performed Class II composite restorations (SimpliShade, Kerr) in typodont upper molars (OneDental) equipped with N95 respirators, full-face shields, disposable headwear and gowns (Enhanced_PPE) or surgical masks, protective glasses/goggles and non-disposable gowns (Standard_PPE) 2 weeks later. Cavity dimensions were measured on cone beam computed tomography images. The quality of composite restorations was assessed using selected FDI criteria and Vickers hardness. A questionnaire assessed the operators' discomfort, anxiety, confidence, ability to perform, and procedure outcome. Data were analyzed using paired t-test and McNemar test (alpha = 0.05). RESULTS: Student-operators experienced greater discomfort and anxiety, reduced confidence and ability to perform, and rated the procedure as less satisfactory with Enhanced_PPE (p < 0.05). Differences in proximal box width were marginally significant (Enhanced_PPE 1.8 ± 0.4 mm, Standard_PPE 1.6 ± 0.3 mm) (p = 0.047). Other cavity dimensions were similar between groups (p > 0.05) as were restorations regarding surface luster, anatomical form, marginal adaptation, proximal contour, and contact (p > 0.05). There were no differences in the hardness of composite restorations (top p = 0.349, bottom p = 0.334). CONCLUSIONS: Enhanced_PPE led to student-operator discomfort, anxiety, and reduced confidence, but did not impact the quality of Class II preparation and composite restorations versus Standard_PPE.

The effect of COVID-19 pandemic on final year dental students' self-confidence level in performing clinical procedures.

BACKGROUND: The outbreak of COVID-19 pandemic in 2020 has dramatically changed teaching approach in dental schools due to the switch to distance learning and the lack of practice training in direct contact with patients with possible impact on clinical skills of students. The aim of the study was to assess the level of the 2020 final year dental students' self-confidence in performing different dental procedures through specially designed questionnaire and compare it to self-confidence of the 2019 final year students. MATERIALS AND METHODS: An anonymous questionnaire consisting of 40 questions regarding self-confidence level in performing 40 different dental procedures and based on five points Likert-like scale was distributed during November 2020 to final year dental students whose studies were disrupted by the COVID-19 pandemic lockdown in one semester. The study group comprised their answers. The comparison was done with the control group that consisted of students' answers on the same questionnaire from previous 2019 year conducted as a part of regular internal educational evaluation. RESULTS: Response rate was 74.2% in study group and 89.3% in control group. Mean level of self-confidence reported by 115 students in study group was significantly lower than that reported by 100 students in control group (3.28±1.08 vs. 3.58±0.88, respectively) and the distribution of self-confidence scores were different in observed groups. Graduates from study group felt less confident than those from control in 8 clinical skills. CONCLUSION: Abrupt changes in teaching modalities caused by COVID-19 pandemic had significant impact on final year dental students' self-confidence indicating additional educational needs in postgraduate period.

Effects of whitening gels on color and surface properties of a microhybrid and nanohybrid composite.

The aim of this study was to compare color changes, surface roughness and gloss of a microhybrid and nanohybrid composite whitened in a simulated in-office or at-home procedure using 40% hydrogen peroxide or 16% carbamide peroxide, respectively. CIELab coordinates were measured before, during and after treatment using VITA EasyShade V (VITA) and ∆E00 calculated. Surface roughness was measured using a surface roughness tester (SJ210; Mitutoyo). Gloss was measured using a gloss checker (IG-331; Horiba). At-home whitening resulted in ∆E00 of 1.23±0.49 (microhybrid) and 1.01±0.76 (nanohybrid). In-office exposure resulted in ∆E00 of 0.69±0.38 (microhybrid) and 0.72±0.50 (nanohybrid). There were no significant differences in ∆E00, surface roughness and gloss between whitening protocols (p>0.05). Color changes of a microhybrid and nanohybrid composite following simulated in-office or at-home whitening reached CIEDE2000 50:50% perceptibility but not acceptability threshold. Surface roughness and gloss of the microhybrid and nanohybrid composite were not affected by whitening.

Optical properties of composite restorations influenced by dissimilar dentin restoratives.

OBJECTIVES: To evaluate optical properties (color and translucency) of 'sandwich' restorations of resin-based composites and esthetically unfavorable dentin restoratives. METHODS: Cylindrical 'dentin' specimens (8mm in diameter and 2mm thick, N=5/group) were prepared using EverX Posterior (GC), Biodentine (Septodont), experimental hydroxyapatite (HAP) or conventional composites (Gradia Direct Posterior, GC; Filtek Z250 and Filtek Z500, 3M ESPE). Capping 'enamel' layers were prepared using composites (Gradia Direct Posterior, Filtek Z250 or Z550) of A1 or A3 shade and the following thickness: 0.6, 1 or 2mm. Color (ΔE) and translucency parameter (TP) were determined using a spectrophotometer (VITA Easyshade Advance 4.0, VITA Zahnfabrik). Data were statistically analyzed using analysis of variance with Tukey's post-hoc tests (α=0.05). RESULTS: TP was greatly affected by layer thickness, whilst ΔE depended on shade and layer thickness of the capping composite. HAP and Biodentine showed significantly lower TP and higher ΔE (deviation from 'ideal white') than composites (p<0.05). Greater TP was seen in EverX_composite groups than in corresponding control groups of the same shade and thickness. TP of composites combined with Biodentine or HAP was below 2, lower than the corresponding control groups (p<0.05). Within-group differences of ΔE were greatest in HAP_composite groups. EverX_Gradia and EverX_FiltekZ250 combinations showed the most comparable ΔE with the control groups. SIGNIFICANCE: A 2mm thick layer of composite covering dentin restoratives with unfavorable esthetics is recommended for a final 'sandwich' restoration that is esthetically comparable to a conventional, mono-composite control restoration.

Postoperative sensitivity associated with low shrinkage versus conventional composites.

INTRODUCTION: Postoperative sensitivity in restorative dentistry can be related to preparation trauma, dentin adhesives' ability to seal open dentinal tubules, deformation of restorations under occlusal stresses and microleakage. OBJECTIVE: The study assessed possible reduction in postoperative sensitivity with low shrinkage compared to conventional composites using different bonding agents and the influence of the operator skill on the incidence of postoperative sensitivity. METHODS: Nine hundred and sixty permanent premolars and molars with primary carious lesions from patients 21 to 40 years old were used. Cavities 2 to 3 mm deep and with margins in enamel were prepared by four operators. Two operators had five years (A and B) and two had over 20 years (C and D) of clinical experience. Teeth were divided into eight groups each contained 120 restorations: (1) Els+James-2 (original formula), (2) Els+James-2 (new formula), (3) Els+Excite, (4) InTenSe+James-2 (original formula), (5) InTenSe+James-2 (new formula), (6) InTenSe+Excite, (7) Tetric Ceram+Excite, and (8) Point 4+OptiBond Solo Plus. At 14 days postoperatively, two independent operators, who did not take part in the clinical procedure, assessed postoperative teeth sensitivity using special questionnaires. Data were analyzed using non-parametric chi-square, Mann-Whitney and ANOVA tests. RESULTS: Group 8 showed significantly higher score than the other groups. Less postoperative sensitivity was reported with two low-shrinkage composites (groups 2, 3, and 5) but with no significant difference. There was no statistical difference between groups 1, 2, 3, 4, 5, 6 and 7. Operator A had the highest postoperative sensitivity score compared to the other three. CONCLUSION: Conventional composite material Point 4 with its bonding agent caused significantly more postoperative sensitivity than low shrinkage composites combined with different adhesives. Operator skill influenced the incidence of postoperative sensitivity.