RESUMO
BACKGROUND: Foot deformities (e.g. planovalgus and cavovarus) are very common in children with spastic cerebral palsy (CP), with the midfoot often being involved. Dynamic foot function can be assessed with 3D gait analysis including a multi-segment foot model. Incorporating a midfoot segment in such a model, allows quantification of separate Chopart and Lisfranc joint kinematics. Yet, midfoot kinematics have not previously been reported in CP. RESEARCH QUESTIONS: What is the difference in multi-segment kinematics including midfoot joints between common foot deformities in CP and typically-developing feet? METHODS: 103 feet of 57 children with spastic CP and related conditions were retrospectively included and compared with 15 typically-developing children. All children underwent clinical gait analysis with the Amsterdam Foot Model marker set. Multi-segment foot kinematics were calculated for three strides per foot and averaged. A k-means cluster analysis was performed to identify foot deformity groups that were present within CP data. The deformity type represented by each cluster was based on the foot posture index. Kinematic output of the clusters was compared to typically-developing data for a static standing trial and for the range of motion and kinematic waveforms during walking, using regular and SPM independent t-tests respectively. RESULTS: A neutral, planovalgus and varus cluster were identified. Neutral feet showed mostly similar kinematics as typically-developing data. Planovalgus feet showed increased ankle valgus and Chopart dorsiflexion, eversion and abduction. Varus feet showed increased ankle varus and Chopart inversion and adduction. SIGNIFICANCE: This study is the first to describe Chopart and Lisfranc joint kinematics in different foot deformities of children with CP. It shows that adding a midfoot segment can provide additional clinical and kinematic information. It highlights joint angles that are more distinctive between deformities, which could be helpful to optimize the use of multi-segment foot kinematics in the clinical decision making process.
Assuntos
Paralisia Cerebral , Humanos , Paralisia Cerebral/fisiopatologia , Criança , Fenômenos Biomecânicos , Masculino , Feminino , Estudos Retrospectivos , Pé/fisiopatologia , Amplitude de Movimento Articular/fisiologia , Análise da Marcha , Marcha/fisiologia , Transtornos Neurológicos da Marcha/fisiopatologia , Transtornos Neurológicos da Marcha/etiologia , Deformidades do Pé/fisiopatologia , Articulações do Pé/fisiopatologia , Pré-Escolar , AdolescenteRESUMO
The aim of this comparative, cross-sectional study was to determine whether markerless motion capture can track deviating gait patterns in children with cerebral palsy (CP) to a similar extent as marker-based motion capturing. Clinical gait analysis (CGA) was performed for 30 children with spastic CP and 15 typically developing (TD) children. Marker data were processed with the Human Body Model and video files with Theia3D markerless software, to calculate joint angles for both systems. Statistical parametric mapping paired t-tests were used to compare the trunk, pelvis, hip, knee and ankle joint angles, for both TD and CP, as well as for the deviation from the norm in the CP group. Individual differences were quantified using mean absolute differences. Markerless motion capture was able to track frontal plane angles and sagittal plane knee and ankle angles well, but individual deviations in pelvic tilt and transverse hip rotation as present in CP were not captured by the system. Markerless motion capture is a promising new method for CGA in children with CP, but requires improvement to better capture several clinically relevant deviations especially in pelvic tilt and transverse hip rotation.
Assuntos
Paralisia Cerebral , Análise da Marcha , Humanos , Paralisia Cerebral/fisiopatologia , Criança , Masculino , Feminino , Análise da Marcha/métodos , Estudos Transversais , Marcha/fisiologia , Articulação do Joelho/fisiopatologia , Articulação do Tornozelo/fisiopatologia , Articulação do Quadril/fisiopatologia , Fenômenos Biomecânicos , Adolescente , Amplitude de Movimento Articular , Captura de MovimentoRESUMO
Segment coordinate systems (CSs) of marker-based multi-segment foot models are used to measure foot kinematics, however their relationship to the underlying bony anatomy is barely studied. The aim of this study was to compare marker-based CSs (MCSs) with bone morphology-based CSs (BCSs) for the hindfoot and forefoot. Markers were placed on the right foot of fifteen healthy adults according to the Oxford, Rizzoli and Amsterdam Foot Model (OFM, RFM and AFM, respectively). A CT scan was made while the foot was loaded in a simulated weight-bearing device. BCSs were based on axes of inertia. The orientation difference between BCSs and MCSs was quantified in helical and 3D Euler angles. To determine whether the marker models were able to capture inter-subject variability in bone poses, linear regressions were performed. Compared to the hindfoot BCS, all MCSs were more toward plantar flexion and internal rotation, and RFM was also oriented toward more inversion. Compared to the forefoot BCS, OFM and RFM were oriented more toward dorsal and plantar flexion, respectively, and internal rotation, while AFM was not statistically different in the sagittal and transverse plane. In the frontal plane, OFM was more toward eversion and RFM and AFM more toward inversion compared to BCS. Inter-subject bone pose variability was captured with RFM and AFM in most planes of the hindfoot and forefoot, while this variability was not captured by OFM. When interpreting multi-segment foot model data it is important to realize that MCSs and BCSs do not always align.
Assuntos
Pé , Marcha , Adulto , Humanos , Pé/diagnóstico por imagem , Caminhada , Mãos , Extremidade Inferior , Fenômenos BiomecânicosRESUMO
The multibody nature of the musculoskeletal system makes each applied force potentially accelerate all body segments. Hence, muscles' actions on the kinematics of crossed and non-crossed joints should be estimated based on multibody dynamics. The objective of this study was to systematically investigate the actions of main lower limb muscles on the sagittal-plane angular kinematics of the hip, knee, and ankle joints, during upright standing and gait. Subject-specific simulations were performed to compute the muscle-tendon forces based on three-dimensional kinematic data collected from 10 able-bodied subjects during walking at preferred speed and during relaxed standing posture. A subject-scaled model consisting of the lower limb segments, 19 degrees of freedom and 92 Hill-type muscle-tendon units was used. Muscle-induced joint angular accelerations were estimated by Induced Acceleration Analysis in OpenSim. A comprehensive description of the estimated joint accelerations induced by lower limb muscles was presented, for upright standing and for the whole gait cycle. The observed muscle actions on crossed and non-crossed joints were phase- and task-specific. The main flexors and extensors for each joint were reported. Particular biarticular muscles presented actions opposite to their anatomical classification for specific joints. Antagonist muscle actions were revealed, such as the hitherto unknown opposite actions of the soleus and gastrocnemius at the ankle, and of the iliopsoas and soleus at the knee and ankle, during upright standing. Agonist actions among remote muscles were also identified. The presented muscle actions and their roles in joint kinematics of bipedal standing and walking contribute to understanding task-specific coordination.
Assuntos
Aceleração , Marcha , Fenômenos Biomecânicos , Humanos , Articulações , Músculo Esquelético , CaminhadaRESUMO
BACKGROUND: Foot and ankle joint kinematics are measured during clinical gait analyses with marker-based multi-segment foot models. To improve on existing models, measurement errors due to soft tissue artifacts (STAs) and marker misplacements should be reduced. Therefore, the aim of this study is to define a clinically informed, universally applicable multi-segment foot model, which is developed to minimize these measurement errors. METHODS: The Amsterdam foot model (AFM) is a follow-up of existing multi-segment foot models. It was developed by consulting a clinical expert panel and optimizing marker locations and segment definitions to minimize measurement errors. Evaluation of the model was performed in three steps. First, kinematic errors due to STAs were evaluated and compared to two frequently used foot models, i.e. the Oxford and Rizzoli foot models (OFM, RFM). Previously collected computed tomography data was used of 15 asymptomatic feet with markers attached, to determine the joint angles with and without STAs taken into account. Second, the sensitivity to marker misplacements was determined for AFM and compared to OFM and RFM using static standing trials of 19 asymptomatic subjects in which each marker was virtually replaced in multiple directions. Third, a preliminary inter- and intra-tester repeatability analysis was performed by acquiring 3D gait analysis data of 15 healthy subjects, who were equipped by two testers for two sessions. Repeatability of all kinematic parameters was assessed through analysis of the standard deviation (σ) and standard error of measurement (SEM). RESULTS: The AFM was defined and all calculation methods were provided. Errors in joint angles due to STAs were in general similar or smaller in AFM (≤2.9°) compared to OFM (≤4.0°) and RFM (≤6.7°). AFM was also more robust to marker misplacement than OFM and RFM, as a large sensitivity of kinematic parameters to marker misplacement (i.e. > 1.0°/mm) was found only two times for AFM as opposed to six times for OFM and five times for RFM. The average intra-tester repeatability of AFM angles was σ:2.2[0.9°], SEM:3.3 ± 0.9° and the inter-tester repeatability was σ:3.1[2.1°], SEM:5.2 ± 2.3°. CONCLUSIONS: Measurement errors of AFM are smaller compared to two widely-used multi-segment foot models. This qualifies AFM as a follow-up to existing foot models, which should be evaluated further in a range of clinical application areas.
Assuntos
Articulação do Tornozelo , Marcha , Fenômenos Biomecânicos , Análise da Marcha , Humanos , Extremidade Inferior , Reprodutibilidade dos TestesRESUMO
BACKGROUND: The Rizzoli Foot Model (RFM) and Oxford Foot Model (OFM) are used to analyze segmented foot kinematics with independent tracking markers. Alternatively, rigid marker clusters can be used to improve markers' visualization and facilitate analyzing shod gait. RESEARCH QUESTION: Are there differences in angles from the RFM and OFM, obtained with independent and clustered tracking markers, during the stance phase of walking? METHODS: Walking kinematics of 14 non-disabled participants (25.2 years (SD 2.8)) were measured at self-selected speed. Rearfoot-shank and forefoot-rearfoot angles were measured from two models with two tracking methods: RFM, OFM, RFM-cluster, and OFM-cluster. In RFM-cluster and OFM-cluster, the rearfoot and forefoot tracking markers were rigidly clustered, fixed on rods' tips attached to a metallic base. Statistical Parametric Mapping (SPM) One-Way Repeated Measures ANOVAs and SPM Paired t-tests were used to compare waveforms. Coefficients of Multiple Correlation (CMC) quantified the similarity between waveforms. One-way Repeated Measures ANOVAs were conducted to compare the ranges of motion (ROMs), and pre-planned contrasts investigated differences between the models and tracking methods. Intraclass Correlation Coefficients (ICC) were computed to verify the similarity between ROMs. RESULTS: Differences occurred mostly in small parts of the stance phase for the cluster vs. non-cluster comparisons and the RFM vs. OFM comparisons. ROMs were slightly different between the models and tracking methods in most comparisons. The curves (CMC ≥ 0.71) were highly similar between the models and tracking methods. The ROMs (ICC ≥ 0.67) were moderatetly to highly similar in most comparisons. RFM vs. RFM-cluster (forefoot-rearfoot angle - transverse plane), OFM vs. OFM-cluster and RFM vs. OFM (forefoot-rearfoot angle - frontal plane) were not similar (non-significant). SIGNIFICANCE: Rigid clusters are an alternative for tracking rearfoot-shank and forefoot-rearfoot angles during the stance phase of walking. However, specific differences should be considered to contrast results from different models and tracking methods.
Assuntos
Pé , Caminhada , Fenômenos Biomecânicos , Marcha , Humanos , SapatosRESUMO
INTRODUCTION: In three-dimensional gait analysis, anatomical axes are defined by and therefore sensitive to marker placement. Previous analysis of the Oxford Foot Model (OFM) has suggested that the axes of the hindfoot are most sensitive to marker placement on the posterior aspect of the heel. Since other multi-segment foot models also use a similar marker, it is important to find methods to place this as accurately as possible. The aim of this pilot study was to test two different 'jigs' (anatomical alignment devices) against eyeball marker placement to improve reliability of heel marker placement and calculation of hindfoot angles using the OFM. METHODS: Two jigs were designed using three-dimensional printing: a ratio caliper and heel mould. OFM kinematics were collected for ten healthy adults; intra-tester and inter-tester repeatability of hindfoot marker placement were assessed using both an experienced and inexperienced gait analyst for 5 clinically relevant variables. RESULTS: For 3 out of 5 variables the intra-tester and inter-tester variability was below 2 degrees for all methods of marker placement. The ratio caliper had the lowest intra-tester variability for the experienced gait analyst in all 5 variables and for the inexperienced gait analyst in 4 out of 5 variables. However for inter-tester variability, the ratio caliper was only lower than the eyeball method in 2 out of the 5 variables. The mould produced the worst results for 3 of the 5 variables, and was particularly prone to variability when assessing average hindfoot rotation, making it the least reliable method overall. CONCLUSIONS: The use of the ratio caliper may improve intra-tester variability, but does not seem superior to the eyeball method of marker placement for inter-tester variability. The use of a heel mould is discouraged.
Assuntos
Pontos de Referência Anatômicos , Análise da Marcha/instrumentação , Análise da Marcha/métodos , Calcanhar/anatomia & histologia , Modelos Anatômicos , Impressão Tridimensional , Adulto , Fenômenos Biomecânicos , Feminino , Pé/anatomia & histologia , Pé/fisiologia , Voluntários Saudáveis , Calcanhar/fisiologia , Humanos , Masculino , Variações Dependentes do Observador , Projetos Piloto , Reprodutibilidade dos Testes , RotaçãoRESUMO
BACKGROUND: During self-paced (SP) time trials (TTs), cyclists show unconscious nonrandom variations in power output of up to 10% above and below average. It is unknown what the effects of variations in power output of this magnitude are on physiological, neuromuscular, and perceptual variables. PURPOSE: To describe physiological, neuromuscular, and perceptual responses of 10-km TTs with an imposed even-paced (EP) and variable-paced (VP) workload. METHODS: Healthy male, trained, task-habituated cyclists (N = 9) completed three 10-km TTs. First, an SP TT was completed, the mean workload from which was used as the mean workload of the EP and VP TTs. The EP was performed with an imposed even workload, while VP was performed with imposed variations in workload of ±10% of the mean. In EP and VP, cardiorespiratory, neuromuscular, and perceptual variables were measured. RESULTS: Mean rating of perceived exertion was significantly lower in VP (6.13 [1.16]) compared with EP (6.75 [1.24]), P = .014. No mean differences were found for cardiorespiratory and almost all neuromuscular variables. However, differences were found at individual kilometers corresponding to power-output differences between pacing strategies. CONCLUSION: Variations in power output during TTs of ±10%, simulating natural variations in power output that are present during SP TTs, evoke minor changes in cardiorespiratory and neuromuscular responses and mostly affect the perceptual response. Rating of perceived exertion is lower when simulating natural variations in power output, compared with EP cycling. The imposed variations in workload seem to provide a psychological rather than a physiological or neuromuscular advantage.
Assuntos
Ciclismo , Esforço Físico , Ciclismo/fisiologia , Humanos , Masculino , Consumo de Oxigênio , Esforço Físico/fisiologiaRESUMO
Understanding the effect of individual marker misplacements is important to improve the repeatability and aid to the interpretation of multi-segment foot models like the Oxford and Rizzoli Foot Models (OFM, RFM). Therefore, this study aimed to quantify the effect of controlled anatomical marker misplacement on multi-segment foot kinematics (i.e. marker placement sensitivity) as calculated by OFM and RFM in a range of foot sizes. Ten healthy adults and nine children were included. A combined OFM and RFM marker set was placed on their right foot and a static standing trial was collected. Each marker was replaced ± 10 mm in steps of 1 mm over the three axes of a foot coordinate system. For each replacement the change in segment orientation (tibia, hindfoot, midfoot, forefoot) was calculated with respect to the reference pose in which no markers were replaced. A linear fit was made to calculate the sensitivity of segment orientation to marker misplacement in °/mm. Additionally, the effect of foot size on the sensitivity was determined using linear regressions. For every foot segment of both models, at least one marker had a sensitivity ≥ 1.0°/mm. Highest values were found for the markers at the posterior aspect of the calcaneus in OFM (1.5°/mm) and the basis of the second metatarsal in RFM (1.4°/mm). Foot size had a small effect on 40% of the sensitivity values. This study identified markers of which consistent placement is critical to prevent clinically relevant errors (>5°). For more repeatable multi-segment models, the role of these markers within the models' definitions needs to be reconsidered.
Assuntos
Calcâneo , Pé , Adulto , Fenômenos Biomecânicos , Criança , Marcha , Humanos , Rotação , TíbiaRESUMO
Movement of skin markers with respect to their underlying bone (i.e. soft tissue artifacts (STAs)) might corrupt the accuracy of marker-based movement analyses. This study aims to quantify STAs in 3D for foot markers and their effect on multi-segment foot kinematics as calculated by the Oxford and Rizzoli Foot Models (OFM, RFM). Fifteen subjects with asymptomatic feet were seated on a custom-made loading device on a computed tomography (CT) table, with a combined OFM and RFM marker set on their right foot. One unloaded reference CT-scan with neutral foot position was performed, followed by 9 loaded CT-scans at different foot positions. The 3D-displacement (i.e. STA) of each marker in the underlying bone coordinate system between the reference scan and other scans was calculated. Subsequently, segment orientations and joint angles were calculated from the marker positions according to OFM and RFM definitions with and without STAs. The differences in degrees were defined as the errors caused by the marker displacements. Markers on the lateral malleolus and proximally on the posterior aspect of the calcaneus showed the largest STAs. The hindfoot-shank joint angle was most affected by STAs in the most extreme foot position (40° plantar flexion) in the sagittal plane for RFM (mean: 6.7°, max: 11.8°) and the transverse plane for OFM (mean: 3.9°, max: 6.8°). This study showed that STAs introduce clinically relevant errors in multi-segment foot kinematics. Moreover, it identified marker locations that are most affected by STAs, suggesting that their use within multi-segment foot models should be reconsidered.
Assuntos
Artefatos , Pé , Articulação do Tornozelo , Fenômenos Biomecânicos , Pé/diagnóstico por imagem , Humanos , CaminhadaRESUMO
BACKGROUND: Displaced intra-articular calcaneal fractures often result in permanent disability, reduced quality of life and high socio-economic costs. Since they often result in a change in geometry of the foot, pedobarography may be useful in predicting outcome at an early stage. The aim of this study was to examine whether a correlation exists between pedobarography and functional outcomes in patients with a displaced intra-articular fracture. METHODS: In this systematic review, studies were included when they investigated the correlation between pedobarography and functional outcome in displaced intra-articular calcaneal fractures. Excluded were studies on <10 patients or on animals/cadavers. Collected were baseline patient/treatment characteristics, pedobarographic data (peak pressures, maximum force and centre of pressure) and functional outcome scores. FINDINGS: Out of 153 abstracts, 40 remained for full text screening and 9 were included. Pedobarographic measurements (pressure plate or insoles) showed a lateralization of centre of pressure, decreased pressures underneath the hindfoot, first and second toe and increased pressure underneath the midfoot and forefoot. Correlations with functional outcome were found in some combined pedobarographic results (entire foot/multiple measurements), but hardly in pressures underneath specific foot areas. INTERPRETATION: Even though increased or decreased pressures in specific areas of the foot may not be directly related to functional outcome, combined scores often did. For pedobarography to serve as a prediction tool, it should be more standardised. However, assessing centre of pressure and altered peak pressures underneath the foot, may be useful in developing customized aids such as insoles, aiming for a more individualized improvement.
Assuntos
Calcâneo/lesões , Fraturas Intra-Articulares/diagnóstico , Fraturas Intra-Articulares/fisiopatologia , Pressão , Calcâneo/fisiopatologia , Humanos , Prognóstico , Qualidade de VidaRESUMO
BACKGROUND: Estimating muscle-tendon complex (MTC) lengths is important for planning of soft tissue surgery and evaluating outcomes, e.g. in children with cerebral palsy (CP). Conventional musculoskeletal models often represent the foot as one rigid segment, called a mono-segment foot model (mono-SFM). However, a multi-segment foot model (multi-SFM) might provide better estimates of triceps surae MTC lengths, especially in patients with foot deformities. RESEARCH QUESTION: What is the effect of a mono- versus a multi-SFM on simulated ankle angles and triceps surae MTC lengths during gait in typically developing subjects and in children with CP with equinus, cavovarus or planovalgus foot deformities? METHODS: 50 subjects were included, 10 non-affected adults, 10 typically developing children, and 30 children with spastic CP and foot deformities. During walking trials, marker trajectories were collected for two marker models, including a mono- and multi-segment foot; respectively Newington gait model and Oxford foot model. Two musculoskeletal lower body models were constructed in OpenSim with either a mono- or multi-SFM based on the corresponding marker models. Normalized triceps surae MTC lengths (soleus, gastrocnemius medialis and lateralis) and ankle angles were calculated and compared between models using statistical parametric mapping RM-ANOVAs. Root mean square error values between simulated MTC lengths were compared using Wilcoxon signed-rank and rank-sum tests. RESULTS: Mono-SFM simulated significantly more ankle dorsiflexion (7.5 ± 1.2°) and longer triceps surae lengths (difference; soleus:2.6 ± 0.29 %, gastrocnemius medialis:1.7 ± 0.2 %, gastrocnemius lateralis:1.8 ± 0.2%) than a multi-SFM. Differences between models were larger in children with CP compared to typically developing children and larger in the stance compared to the swing phase of gait. Largest differences were found in children with CP presenting with planovalgus (4.8 %) or cavovarus (3.8 %) foot deformities. SIGNIFICANCE: It is advisable to use a multi-SFM in musculoskeletal models when simulating triceps surae MTC lengths, especially in individuals with planovalgus or cavovarus foot deformities.
Assuntos
Articulação do Tornozelo/fisiopatologia , Paralisia Cerebral/fisiopatologia , Ossos do Pé/fisiopatologia , Deformidades Congênitas do Pé/fisiopatologia , Pé/fisiopatologia , Transtornos Neurológicos da Marcha/fisiopatologia , Marcha/fisiologia , Músculo Esquelético/fisiopatologia , Tendões/fisiopatologia , Adulto , Fenômenos Biomecânicos , Criança , Feminino , Transtornos Neurológicos da Marcha/diagnóstico , Humanos , Masculino , Modelos Anatômicos , Amplitude de Movimento Articular/fisiologia , Caminhada/fisiologiaRESUMO
BACKGROUND: The Oxford Foot Model (OFM) and Rizzoli Foot Model (RFM) are the two most frequently used multi-segment models to measure foot kinematics. However, a comprehensive comparison of the kinematic output of these models is lacking. RESEARCH QUESTION: What are the differences in kinematic output between OFM and RFM during normal gait and typical pathological gait patterns in healthy adults?. METHODS: A combined OFM and RFM marker set was placed on the right foot of ten healthy subjects. A static standing trial and six level walking trials were collected for normal gait and for four voluntarily adopted gait types: equinus, crouch, toe-in and toe-out. Joint angles were calculated for every trial for the hindfoot relative to shank (HF-SH), forefoot relative to hindfoot (FF-HF) and hallux relative to forefoot (HX-FF). Average static joint angles of both models were compared between models. After subtracting these offsets, the remaining dynamic angles were compared using statistical parametric mapping repeated measures ANOVAs and t-tests. Furthermore, range of motion was compared between models for every angle. RESULTS: For the static posture, RFM compared to OFM measured more plantar flexion (Δ = 6°) and internal rotation (Δ = 7°) for HF-SH, more plantar flexion (Δ = 34°) and inversion (Δ = 13°) for FF-HF and more dorsal flexion (Δ = 37°) and abduction (Δ = 12°) for HX-FF. During normal walking, kinematic differences were found in various parts of the gait cycle. Moreover, range of motion was larger in the HF-SH for OFM and in FF-HF and HX-FF for RFM. The differences between models were not the same for all gait types. Equinus and toe-out gait demonstrated most pronounced differences. SIGNIFICANCE: Differences are present in kinematic output between OFM and RFM, which also depend on gait type. Therefore, kinematic output of foot and ankle studies should be interpreted with careful consideration of the multi-segment foot model used.
Assuntos
Fenômenos Biomecânicos/fisiologia , Pé/fisiopatologia , Marcha/fisiologia , Adulto , Feminino , Transtornos Neurológicos da Marcha , Humanos , MasculinoRESUMO
Neuro-musculoskeletal modelling can provide insight into the aberrant muscle function during walking in those suffering cerebral palsy (CP). However, such modelling employs optimization to estimate muscle activation that may not account for disturbed motor control and muscle weakness in CP. This study evaluated different forms of neuro-musculoskeletal model personalization and optimization to estimate musculotendon forces during gait of nine children with CP (GMFCS I-II) and nine typically developing (TD) children. Data collection included 3D-kinematics, ground reaction forces, and electromyography (EMG) of eight lower limb muscles. Four different optimization methods estimated muscle activation and musculotendon forces of a scaled-generic musculoskeletal model for each child walking, i.e. (i) static optimization that minimized summed-excitation squared; (ii) static optimization with maximum isometric muscle forces scaled to body mass; (iii) an EMG-assisted approach using optimization to minimize summed-excitation squared while reducing tracking errors of experimental EMG-linear envelopes and joint moments; and (iv) EMG-assisted with musculotendon model parameters first personalized by calibration. Both static optimization approaches showed a relatively low model performance compared to EMG envelopes. EMG-assisted approaches performed much better, especially in CP, with only a minor mismatch in joint moments. Calibration did not affect model performance significantly, however it did affect musculotendon forces, especially in CP. A model more consistent with experimental measures is more likely to yield more physiologically representative results. Therefore, this study highlights the importance of calibrated EMG-assisted modelling when estimating musculotendon forces in TD children and even more so in children with CP.
Assuntos
Paralisia Cerebral/fisiopatologia , Eletromiografia , Marcha/fisiologia , Fenômenos Mecânicos , Modelos Biológicos , Músculos/fisiopatologia , Tendões/fisiopatologia , Fenômenos Biomecânicos , Criança , Pré-Escolar , Feminino , Humanos , Masculino , Músculo Esquelético/fisiologiaRESUMO
The purpose of this study was to determine whether stride length and knee angle of the leading leg at foot contact, at the instant of maximal external rotation of the shoulder, and at ball release are associated with ball speed in elite youth baseball pitchers. In this study, fifty-two elite youth baseball pitchers (mean age 15.2 SD (standard deviation) 1.7 years) pitched ten fastballs. Data were collected with three high-speed video cameras at a frequency of 240 Hz. Stride length and knee angle of the leading leg were calculated at foot contact, maximal external rotation, and ball release. The associations between these kinematic variables and ball speed were separately determined using generalized estimating equations. Stride length as percentage of body height and knee angle at foot contact were not significantly associated with ball speed. However, knee angles at maximal external rotation and ball release were significantly associated with ball speed. Ball speed increased by 0.45 m/s (1 mph) with an increase in knee extension of 18 degrees at maximal external rotation and 19.5 degrees at ball release. In conclusion, more knee extension of the leading leg at maximal external rotation and ball release is associated with higher ball speeds in elite youth baseball pitchers.
RESUMO
The rating-of-perceived-exertion (RPE) template is thought to regulate pacing and has been shown to be very robust in different circumstances. PURPOSE: The primary purpose was to investigate whether the RPE template can be manipulated by changing the race distance during the course of a time trial. The secondary purpose was to study how athletes cope with this manipulation, especially in terms of the RPE template. METHOD: Trained male subjects (N = 10) performed 3 cycling time trials: a 10-km (TT10), a 15-km (TT15), and a manipulated 15-km (TTman). During the TTman, subjects started the time trial believing that they were going to perform a 10-km time trial. However, at 7.5 km they were told that it was a 15-km time trial. RESULTS: A significant main effect of time-trial condition on RPE scores until kilometer 7.5 was found (P = .016). Post hoc comparisons showed that the RPE values of the TT15 were lower than the RPE values of the TT10 (difference 0.60; CI95% 0.11, 1.0) and TTman (difference 0.73; CI95% 0.004, 1.5). After the 7.5 km, a transition phase occurs, in which an interaction effect is present (P = .011). After this transition phase, the RPE values of TTman and TT15 did not statistically differ (P = 1.00). CONCLUSIONS: This novel distance-endpoint manipulation demonstrates that it is possible to switch between RPE templates. A clear shift in RPE during the TTman is present between the RPE templates of the TT10 and TT15. The shift strongly supports suggestions that pacing is regulated using an RPE template.