Chemically modified glycosaminoglycan derivatives as building blocks for biomaterial coatings and hydrogels.

Tissue regeneration is regulated by the cellular microenvironment, e.g. the extracellular matrix. Here, sulfated glycosaminoglycans (GAG), are of vital importance interacting with mediator proteins and influencing their biological activity. Hence, they are promising candidates for controlling tissue regeneration. This review addresses recent achievements regarding chemically modified GAG as well as collagen/GAG-based coatings and hydrogels including (i) chemical functionalization strategies for native GAG, (ii) GAG-based biomaterial strategies for controlling cellular responses, (iii) (bio)chemical methods for characterization and iv) protein interaction profiles and attained tissue regeneration in vitro and in vivo. The potential of GAG for bioinspired, functional biomaterials is highlighted.

Mono(2-ethylhexyl) phthalate (MEHP) and mono(2-ethyl-5-oxohexyl) phthalate (MEOHP) but not di(2-ethylhexyl) phthalate (DEHP) bind productively to the peroxisome proliferator-activated receptor γ.

RATIONALE: The most frequently occurring phthalate, di(2-ethylhexyl) phthalate (DEHP), causes adverse effects on glucose homeostasis and insulin sensitivity in several cell models and epidemiological studies. However, thus far, there is no information available on the molecular interaction of phthalates and one of the key regulators of the metabolism, the peroxisome proliferator-activated receptor gamma (PPARγ). Since the endogenous ligand of PPARγ, 15-deoxy-delta-12,14-prostaglandin J2 (15Δ-PGJ2 ), features structural similarity to DEHP and its main metabolites produced in human hepatic metabolism, mono(2-ethylhexyl) phthalate (MEHP) and mono(2-ethyl-5-oxohexyl) phthalate (MEOHP), we tested the hypothesis of direct interactions between PPARγ and DEHP or its transformation products. METHODS: Hydrogen/deuterium exchange mass spectrometry (HDX-MS) and docking were conducted to obtain structural insights into the interactions and surface plasmon resonance (SPR) analysis to reveal information about binding levels. To confirm the activation of PPARγ upon ligand binding on the cellular level, the GeneBLAzer® bioassay was performed. RESULTS: HDX-MS and SPR analyses demonstrated that the metabolites MEHP and MEOHP, but not DEHP itself, bind to the ligand binding pocket of PPARγ. This binding leads to typical activation-associated conformational changes, as observed with its endogenous ligand 15Δ-PGJ2 . Furthermore, the reporter gene assay confirmed productive interaction. DEHP was inactive up to a concentration of 14 µM, while the metabolites MEHP and MEOHP were active at low micromolar concentrations. CONCLUSIONS: In summary, this study gives structural insights into the direct interaction of PPARγ with MEHP and MEOHP and shows that the DEHP transformation products may modulate the lipid metabolism through PPARγ pathways.

Hyaluronan/collagen hydrogel matrices containing high-sulfated hyaluronan microgels for regulating transforming growth factor-ß1.

Hyaluronan (HA)-based microgels generated in a microfluidic approach, containing an artificial extracellular matrix composed of collagen and high-sulfated hyaluronan (sHA3), were incorporated into a HA/collagen-based hydrogel matrix. This significantly enhanced the retention of noncrosslinked sHA3 within the gels enabling controlled sHA3 presentation. Gels containing sHA3 bound higher amounts of transforming growth factor-ß1 (TGF-ß1) compared to pure HA/collagen hydrogels. Moreover, the presence of sHA3-containing microgels improved the TGF-ß1 retention within the hydrogels. These findings are promising for developing innovative biomaterials with adjustable sHA3 release and growth factor interaction profiles to foster skin repair, e.g., by rebalancing dysregulated TGF-ß1 levels.

Immobilization of Denosumab on Titanium Affects Osteoclastogenesis of Human Peripheral Blood Monocytes.

Immobilization of proteins has been examined to improve implant surfaces. In this study, titanium surfaces were modified with nanofunctionalized denosumab (cDMAB), a human monoclonal anti-RANKL IgG. Noncoding DNA oligonucleotides (ODN) served as linker molecules between titanium and DMAB. Binding and release experiments demonstrated a high binding capacity of cDMAB and continuous release. Human peripheral mononuclear blood cells (PBMCs) were cultured in the presence of RANKL/MCSF for 28 days and differentiated into osteoclasts. Adding soluble DMAB to the medium inhibited osteoclast differentiation. On nanofunctionalized titanium specimens, the osteoclast-specific TRAP5b protein was monitored and showed a significantly decreased amount on cDMAB-titanium in PBMCs + RANKL/MCSF. PBMCs on cDMAB-titanium also changed SEM cell morphology. In conclusion, the results indicate that cDMAB reduces osteoclast formation and has the potential to reduce osteoclastogenesis on titanium surfaces.

Reciprocal influence of hMSCs/HaCaT cultivated on electrospun scaffolds.

Here, we investigated the synergistic effect of electrospun nanofibrous scaffolds made of gelatin /sulfated hyaluronan (sHA) or native hyaluronan (HA)/chondroitin sulfate (CS) and, keratinocytes (HaCaT)-human mesenchymal stem cells (hMSCs) contact co-culture on epithelial differentiation of hMSCs. The hMSCs were co-cultured in contact with HaCaT cells for 5 days on electrospun scaffold. Results show that electrospun scaffolds containing sulfated glycosaminoglycans (GAGs) stimulate epithelial differentiation in terms of various protein expression markers (keratin 14, ΔNp63α and Pan-cytokeratin) and gene expression of several dermal proteins (keratin 14, ΔNp63α). Electrospun scaffold independent of GAGs alone did not affect the epithelial differentiation of hMSCs but combination of keratinocyte-hMSC contact co-culture and electrospun scaffold promotes the epithelial differentiation of hMSCs.

Sulfated Hyaluronan Alters the Interaction Profile of TIMP-3 with the Endocytic Receptor LRP-1 Clusters II and IV and Increases the Extracellular TIMP-3 Level of Human Bone Marrow Stromal Cells.

Sulfated glycosaminoglycans (sGAGs) modulate cellular processes via their interaction with extracellular matrix (ECM) proteins. We revealed a direct binding of tissue inhibitor of metalloproteinase-3 (TIMP-3) to the endocytic receptor low-density lipoprotein receptor-related protein (LRP-1) clusters II and IV using surface plasmon resonance. Sulfated hyaluronan (sHA) and chondroitin sulfate (sCS) derivatives interfered with TIMP-3/LRP-1 complex formation in a sulfation-dependent manner stronger than heparin. Electrostatic potential calculations suggested a competition between negatively charged GAGs and highly negatively charged complement-like domains of LRP-1 for the binding to a positively charged area of TIMP-3 as an underlying mechanism. In vitro studies revealed increased amounts of pericellular TIMP-3 in the presence of sHA as a consequence of the blocked protein uptake. GAG derivatives as part of biomaterials might post-translationally modulate TIMP-3 levels stronger than native GAGs, thus exhibiting catabolic effects on the ECM, which could prevent extensive pathological matrix degradation and promote wound healing.

Functionalization of titanium implants using a modular system for binding and release of VEGF enhances bone-implant contact in a rodent model.

AIMS: To test the immobilization of vascular endothelial growth factor (VEGF165 ) on the surface of titanium implants using DNA oligonucleotide (ODN) anchor strands for the ability to enhance periimplant bone formation. MATERIALS AND METHODS: DNA oligonucleotides were anchored to the surface of sandblasted acid-etched (SAE) titanium screw implants and were hybridized with complementary strands of ODN conjugated to rhVEGF165 . The implants were tested against blank SAE implants and SAE implants with nano-anchored ODN. The implants were inserted into the tibiae of 36 Sprague-Dawley rats. Primary outcome parameters were bone-implant contact (BIC), amount of new bone formation and periimplant bone density (BD). density after 1, 4 and 13 weeks. Unit of analysis has been the individual implant. RESULTS: Implants with rhVEGF165 hybridized to ODN anchor strands exhibited significantly increased average BIC after 1 month compared to blank implants and implants with anchored ODN strands. CONCLUSIONS: It is concluded that rhVEGF165 immobilized on the surface of titanium implants through nano-anchored oligonucleotide strands can accelerate BIC of sandblasted and etched titanium implants to a certain extent. The radius of effect of the growth factor appears to be limited to tissue immediately adjacent to the implant surface.

Glycosaminoglycan derivatives: promising candidates for the design of functional biomaterials.

Numerous biological processes (tissue formation, remodelling and healing) are strongly influenced by the cellular microenvironment. Glycosaminoglycans (GAGs) are important components of the native extracellular matrix (ECM) able to interact with biological mediator proteins. They can be chemically functionalized and thereby modified in their interaction profiles. Thus, they are promising candidates for functional biomaterials to control healing processes in particular in health-compromised patients. Biophysical studies show that the interaction profiles between mediator proteins and GAGs are strongly influenced by (i) sulphation degree, (ii) sulphation pattern, and (iii) composition and structure of the carbohydrate backbone. Hyaluronan derivatives demonstrate a higher binding strength in their interaction with biological mediators than chondroitin sulphate for a comparable sulphation degree. Furthermore sulphated GAG derivatives alter the interaction profile of mediator proteins with their cell receptors or solute native interaction partners. These results are in line with biological effects on cells relevant for wound healing processes. This is valid for solute GAGs as well as those incorporated in collagen-based artificial ECM (aECMs). Prominent effects are (i) anti-inflammatory, immunomodulatory properties towards macrophages/dendritic cells, (ii) enhanced osteogenic differentiation of human mesenchymal stromal cells, (iii) altered differentiation of fibroblasts to myofibroblasts, (iv) reduced osteoclast activity and (v) improved osseointegration of dental implants in minipigs. The findings of our consortium Transregio 67 contribute to an improved understanding of structure-function relationships of GAG derivatives in their interaction with mediator proteins and cells. This will enable the design of bioinspired, functional biomaterials to selectively control and promote bone and skin regeneration.

Sulfated glycosaminoglycans support osteoblast functions and concurrently suppress osteoclasts.

In order to improve bone regeneration, development and evaluation of new adaptive biomaterials is warranted. Glycosaminoglycans (GAGs) such as hyaluronan (HA) and chondroitin sulfate (CS) are major extracellular matrix (ECM) components of bone, and display osteogenic properties that are potentially useful for biomaterial applications. Using native and synthetic sulfate-modified GAGs, we manufactured artificial collagen/GAG ECM (aECMs) coatings, and evaluated how the presence of GAGs and their degree of sulfation affects the differentiation of murine mesenchymal stem cells to osteoblasts (OB) cultivated on these aECMs. GAG sulfation regulated osteogenesis at all key steps of OB development. Adhesion, but not migration, was diminished by 50% (P < 0.001). Proliferation and metabolic activity were slightly (P < 0.05) and cell death events strongly (P < 0.001) down-regulated due to a switch from proliferative to matrix synthesis state. When exposed to sulfated GAGs, OB marker genes, such as alkaline phosphatase, osteoprotegerin (OPG), and osteocalcin increased by up to 28-fold (P < 0.05) and calcium deposition up to 4-fold (P < 0.05). Furthermore, GAG treatment of OBs suppressed their ability to support osteoclast (OC) differentiation and resorption. In conclusion, GAG sulfation controls bone cell homeostasis by concurrently promoting osteogenesis and suppressing their paracrine support of OC functions, thus displaying a favorable profile on bone remodeling. Whether these cellular properties translate into improved bone regeneration needs to be validated in vivo.

Sulfated glycosaminoglycans exploit the conformational plasticity of bone morphogenetic protein-2 (BMP-2) and alter the interaction profile with its receptor.

Sulfated glycosaminoglycans (GAGs) can direct cellular processes by interacting with proteins of the extracellular matrix (ECM). In this study we characterize the interaction profiles of chemically sulfated hyaluronan (HA) and chondroitin sulfate (CS) derivatives with bone morphogenetic protein-2 (BMP-2) and investigate their relevance for complex formation with the receptor BMPR-IA. These goals were addressed by surface plasmon resonance (SPR) and ELISA in combination with molecular modeling and dynamics simulation. We found not only the interaction of BMP-2 with GAGs to be dependent on the type and sulfation of GAGs but also BMP-2/GAG/BMPR-IA complex formation. The conformational plasticity of the BMP-2 N-termini plays a key role in the structural and thermodynamic characteristics of the BMP-2/GAG/BMPR-IA system. Hence we propose a model that provides direct insights into the importance of the structural and dynamical properties of the BMP-2/BMPR-IA system for its regulation by sulfated GAGs, in which structural asymmetry plays a key role.

Impact of a functionalized olive oil extract on the uterus and the bone in a model of postmenopausal osteoporosis.

PURPOSE: The Mediterranean diet rich in fruits, vegetables and olive oil has been related to a lower osteoporosis incidence and accordingly to a reduced fracture risk. These observations might be mediated by the active constituents of extra virgin olive oil, and especially polyphenols. In the context of exploring the features of olive oil active constituents on postmenopausal osteoporosis, an extra virgin olive oil total polyphenolic fraction (TPF) was isolated and its effect on the bone loss attenuation was investigated. METHODS: Female Lewis rats were ovariectomized and fed a diet enriched with a total phenolic extract of extra virgin olive oil in a concentration of 800 mg/kg diet. RESULTS: Oleocanthal, one compound of the polyphenolic fraction, showed a higher relative estrogen receptor binding affinity to the ERα compared to the ERß. While the TPF only slightly induced the uterine wet weight (490.7 ± 53.7 vs. 432.7 ± 23, p = 0.058), TPF regulated estrogen response genes in the uterus (progesterone receptor, antigen identified by monoclonal antibody Ki67, complement C3). Comparing the quantified bone parameters, the oral TPF substitution did not attenuate the ovariectomy-induced bone loss. CONCLUSIONS: The administration of extra virgin olive oil polyphenols regulated uterine estrogen response marker genes in an E2-agonistic manner. The bone loss induced by estrogen ablation was not mitigated by treatment with the polyphenolic extract.

Coating with artificial matrices from collagen and sulfated hyaluronan influences the osseointegration of dental implants.

Dental implants are an established therapy for oral rehabilitation. High success rates are achieved in healthy bone, however, these rates decrease in compromised host bone. Coating of dental implants with components of the extracellular matrix is a promising approach to enhance osseointegration in compromised peri-implant bone. Dental titanium implants were coated with an artificial extracellular matrix (aECM) consisting of collagen type I and either one of two regioselectively low sulfated hyaluronan (sHA) derivatives (coll/sHA1Δ6s and coll/sHA1) and compared to commercial pure titanium implants (control). After extraction of the premolar teeth, 36 implants were inserted into the maxilla of 6 miniature pigs (6 implants per maxilla). The healing periods were 4 and 8 weeks, respectively. After animal sacrifice, the samples were evaluated histomorphologically and histomorphometrically. All surface states led to a sufficient implant osseointegration after 4 and 8 weeks. Inflammatory or foreign body reactions could not be observed. After 4 weeks of healing, implants coated with coll/sHA1Δ6s showed the highest bone implant contact (BIC; coll/sHA1Δ6s: 45.4%; coll/sHA1: 42.2%; control: 42.3%). After 8 weeks, a decrease of BIC could be observed for coll/sHA1Δ6s and controls (coll/sHA1Δ6s: 37.3%; control: 31.7 %). For implants coated with coll/sHA1, the bone implant contact increased (coll/sHA1: 50.8%). Statistically significant differences could not be observed. Within the limits of the current study, aECM coatings containing low sHA increase peri-implant bone formation around dental implants in maxillary bone compared to controls in the early healing period.

Detonation nanodiamonds biofunctionalization and immobilization to titanium alloy surfaces as first steps towards medical application.

Due to their outstanding properties nanodiamonds are a promising nanoscale material in various applications such as microelectronics, polishing, optical monitoring, medicine and biotechnology. Beyond the typical diamond characteristics like extreme hardness or high thermal conductivity, they have additional benefits as intrinsic fluorescence due to lattice defects without photobleaching, obtained during the high pressure high temperature process. Further the carbon surface and its various functional groups in consequence of the synthesis, facilitate additional chemical and biological modification. In this work we present our recent results on chemical modification of the nanodiamond surface with phosphate groups and their electrochemically assisted immobilization on titanium-based materials to increase adhesion at biomaterial surfaces. The starting material is detonation nanodiamond, which exhibits a heterogeneous surface due to the functional groups resulting from the nitrogen-rich explosives and the subsequent purification steps after detonation synthesis. Nanodiamond surfaces are chemically homogenized before proceeding with further functionalization. Suspensions of resulting surface-modified nanodiamonds are applied to the titanium alloy surfaces and the nanodiamonds subsequently fixed by electrochemical immobilization. Titanium and its alloys have been widely used in bone and dental implants for being a metal that is biocompatible with body tissues and able to bind with adjacent bone during healing. In order to improve titanium material properties towards biomedical applications the authors aim to increase adhesion to bone material by incorporating nanodiamonds into the implant surface, namely the anodically grown titanium dioxide layer. Differently functionalized nanodiamonds are characterized by infrared spectroscopy and the modified titanium alloys surfaces by scanning and transmission electron microscopy. The process described shows an adsorption and immobilization of modified nanodiamonds on titanium; where aminosilanized nanodiamonds coupled with O-phosphorylethanolamine show a homogeneous interaction with the titanium substrate.

Covalent linkage of sulfated hyaluronan to the collagen scaffold Mucograft® enhances scaffold stability and reduces proinflammatory macrophage activation in vivo.

Sulfated glycosaminoglycans (sGAG) show interaction with biological mediator proteins. Although collagen-based biomaterials are widely used in clinics, their combination with high-sulfated hyaluronan (sHA3) is unexplored. This study aims to functionalize a collagen-based scaffold (Mucograft®) with sHA3 via electrostatic (sHA3/PBS) or covalent binding to collagen fibrils (sHA3+EDC/NHS). Crosslinking without sHA3 was used as a control (EDC/NHS Ctrl). The properties of the sHA3-functionalized materials were characterized. In vitro growth factor and cytokine release after culturing with liquid platelet-rich fibrin was performed by means of ELISA. The cellular reaction to the biomaterials was analyzed in a subcutaneous rat model. The study revealed that covalent linking of sHA3 to collagen allowed only a marginal release of sHA3 over 28 days in contrast to electrostatically bound sHA3. sHA3+EDC/NHS scaffolds showed reduced vascular endothelial growth factor (VEGF), transforming growth factor beta 1 (TGF-ß1) and enhanced interleukin-8 (IL-8) and epithelial growth factor (EGF) release in vitro compared to the other scaffolds. Both sHA3/PBS and EDC/NHS Ctrl scaffolds showed a high proinflammatory reaction (M1: CD-68+/CCR7+) and induced multinucleated giant cell (MNGC) formation in vivo. Only sHA3+EDC/NHS scaffolds reduced the proinflammatory macrophage M1 response and did not induce MNGC formation during the 30 days. SHA3+EDC/NHS scaffolds had a stable structure in vivo and showed sufficient integration into the implantation region after 30 days, whereas EDC/NHS Ctrl scaffolds underwent marked disintegration and lost their initial structure. In summary, functionalized collagen (sHA3+EDC/NHS) modulates the inflammatory response and is a promising biomaterial as a stable scaffold for full-thickness skin regeneration in the future.

Surface Functionalization of Poly(l-lactide-co-glycolide) Membranes with RGD-Grafted Poly(2-oxazoline) for Periodontal Tissue Engineering.

Bone tissue defects resulting from periodontal disease are often treated using guided tissue regeneration (GTR). The barrier membranes utilized here should prevent soft tissue infiltration into the bony defect and simultaneously support bone regeneration. In this study, we designed a degradable poly(l-lactide-co-glycolide) (PLGA) membrane that was surface-modified with cell adhesive arginine-glycine-aspartic acid (RGD) motifs. For a novel method of membrane manufacture, the RGD motifs were coupled with the non-ionic amphiphilic polymer poly(2-oxazoline) (POx). The RGD-containing membranes were then prepared by solvent casting of PLGA, POx coupled with RGD (POx_RGD), and poly(ethylene glycol) (PEG) solution in methylene chloride (DCM), followed by DCM evaporation and PEG leaching. Successful coupling of RGD to POx was confirmed spectroscopically by Raman, Fourier transform infrared in attenuated reflection mode (FTIR-ATR), and X-ray photoelectron (XPS) spectroscopy, while successful immobilization of POx_RGD on the membrane surface was confirmed by XPS and FTIR-ATR. The resulting membranes had an asymmetric microstructure, as shown by scanning electron microscopy (SEM), where the glass-cured surface was more porous and had a higher surface area then the air-cured surface. The higher porosity should support bone tissue regeneration, while the air-cured side is more suited to preventing soft tissue infiltration. The behavior of osteoblast-like cells on PLGA membranes modified with POx_RGD was compared to cell behavior on PLGA foil, non-modified PLGA membranes, or PLGA membranes modified only with POx. For this, MG-63 cells were cultured for 4, 24, and 96 h on the membranes and analyzed by metabolic activity tests, live/dead staining, and fluorescent staining of actin fibers. The results showed bone cell adhesion, proliferation, and viability to be the highest on membranes modified with POx_RGD, making them possible candidates for GTR applications in periodontology and in bone tissue engineering.

Hyaluronan/Collagen Hydrogels with Sulfated Glycosaminoglycans Maintain VEGF165 Activity and Fine-Tune Endothelial Cell Response.

In order to restore the regeneration capacity of large-size vascularized tissue defects, innovative biomaterial concepts are required. Vascular endothelial growth factor (VEGF165) is a key factor of angiogenesis interacting with sulfated glycosaminoglycans (sGAG) within the extracellular matrix. As this interplay mainly controls and directs the biological activity of VEGF165, we used chemically modified sGAG derivatives to evaluate the structural requirements of sGAG for controlling and tuning VEGF165 function and to translate these findings into the design of biomaterials. The in-depth analysis of this interaction by surface plasmon resonance and ELISA studies in combination with molecular modeling stressed the relevance of the substitution position, degree of sulfation, and carbohydrate backbone of GAG. Acrylated hyaluronan (HA-AC)/collagen (coll)-based hydrogels containing cross-linked acrylated, sulfated hyaluronan (sHA-AC) derivatives with different substitution patterns or an acrylated chondroitin sulfate (CS-AC) derivative function as multivalent carbohydrate-based scaffolds for VEGF165 delivery with multiple tuning capacities. Depending on the substitution pattern of sGAG, the release of biologically active VEGF165 was retarded in a defined manner compared to pure HA/coll gels, which further controlled the VEGF165-induced stimulation of endothelial cell proliferation and extended morphology of cells. This indicates that sGAG can act as modulators of protein interaction profiles of HA/coll hydrogels. In addition, sHA-AC-containing gels with and even without VEGF165 strongly stimulate endothelial cell proliferation compared to gels containing only CS-AC or HA-AC. Thus, HA/coll-based hydrogels containing cross-linked sHA-AC are biomimetic materials able to directly influence endothelial cells in vitro, which might translate into an improved healing of injured vascularized tissues.

Hydrostatic pressure stimulation of human mesenchymal stem cells seeded on collagen-based artificial extracellular matrices.

Human mesenchymal stem cells (hMSCs) from bone marrow are considered a promising cell source for bone tissue engineering applications because of their ability to differentiate into cells of the osteoblastic lineage. Mechanical stimulation is able to promote osteogenic differentiation of hMSC; however, the use of hydrostatic pressure (HP) has not been well studied. Artificial extracellular matrices containing collagen and chondroitin sulfate (CS) have promoted the expression of an osteoblastic phenotype by hMSCs. However, there has been little research into the combined effects of biochemical stimulation by matrices and simultaneous mechanical stimulation. In this study, artificial extracellular matrices generated from collagen and/or CS were coated onto polycaprolactone-co-lactide substrates, seeded with hMSCs and subjected to cyclic HP at various time points during 21 days after cell seeding to investigate the effects of biochemical, mechanical, and combined biochemical and mechanical stimulations. Cell differentiation was assessed by analyzing the expression of alkaline phosphatase (ALP) at the protein- and mRNA levels, as well as for calcium accumulation. The timing of HP stimulation affected hMSC proliferation and expression of ALP activity. HP stimulation after 6 days was most effective at promoting ALP activity. CS-containing matrices promoted the osteogenic differentiation of hMSCs. A combination of both CS-containing matrices and cyclic HP yields optimal effects on osteogenic differentiation of hMSCs on scaffolds compared with individual responses.

Preparation of superhydrophilic microrough titanium implant surfaces by alkali treatment.

A new strategy to render intrinsically hydrophobic microrough titanium implant surfaces superhydrophilic is reported, which is based on a rapid treatment with diluted aqueous sodium hydroxide solutions. The physicochemical characterization and protein interaction of the resulting superhydrophilic implant surfaces are presented. The superhydrophilicity of alkali treated microrough titanium substrates was mainly attributed to deprotonation and ion exchange processes in combination with a strong enhancement of wettability due to the roughness of the used substrates. Albeit these minor and mostly reversible chemical changes qualitative and quantitative differences between the protein adsorption on untreated and alkali treated microrough titanium substrates were detected. These differences in protein adsorption might account for the enhanced osseointegrative potential of superhydrophilic alkali treated microrough implant surfaces. The presented alkali treatment protocol represents a new clinically applicable route to superhydrophilic microrough titanium substrates by rendering the implant surface superhydrophilic "in situ of implantation".

Glucuronic acid and phosphoserine act as mineralization mediators of collagen I based biomimetic substrates.

Glucuronic acid (GlcA) and phosphoserine (pS) carrying acidic functional groups were used as model molecules for glycosaminoglycans and phosphoproteins, respectively to mimic effects of native biomolecules and influence the mineralization behaviour of collagen I. Collagen substrates modified with GlcA showed a stable interaction between GlcA and collagen fibrils. Substrates were mineralized using the electrochemically assisted deposition (ECAD) in a Ca(2+)/H( x )PO (4) ((3-x)) electrolyte at physiological pH and temperature. During mineralization of collagen-GlcA matrices, crystalline hydroxyapatite (HA) formed earlier with increasing GlcA content of the collagen matrix, while the addition of pS to the electrolyte succeeded in inhibiting the transformation of preformed amorphous calcium phosphate (ACP) to HA. The lower density of the resulting mineralization and the coalesced aggregates formed at a certain pS concentration suggest an interaction between calcium and the phosphate groups of pS involving the formation of complexes. Combining GlcA-modified collagen and pS-modified electrolyte showed dose-dependent cooperative effects.

Success and side effects of different treatment options in the low current attack of bacterial biofilms on titanium implants.

The long-term success of peri-implantitis treatments is generally insufficient. Attacking the bacteria on the titanium implant surface using electrochemical polarization could be an alternative approach. In this study an E. coli biofilm in phosphate buffered saline was treated with low current densities (0.25 to 2 mA/cm2) using anodic, cathodic, or combined polarization regimes, either alone or with the antiseptic chlorhexidine. The antibacterial effect was assessed using LIVE/DEAD® staining and through quantification of viable bacteria, sample surfaces were characterized pre- and post-treatment with electrochemical impedance spectroscopy. All polarization treatments had an antibacterial effect that increased with current density, with at least 1 mA/cm2 necessary to reduce colony forming units by four orders of magnitude. Cathodic treatment was slightly superior to anodic treatment, and there was no difference between alternating polarization and single-type polarization. Neither treatment resulted in a significant detachment of bacteria, but combination with chlorhexidine improved the antibacterial effect synergistically. The use of chloride containing electrolytes is not recommended in this context. The low current densities used here were not sufficient to generate adequate bactericidal chlorine reactive species, but first signs of pitting corrosion were already detected for anodic polarization at 1 mA/cm2.