RESUMO
Magnetite is a common mixed Fe(II,III) iron oxide in mineral deposits and the product of (anaerobic) iron corrosion. In various Earth systems, magnetite surfaces participate in surface-mediated redox reactions. The reactivity and redox properties of the magnetite surface depend on the surface speciation, which varies with environmental conditions. In this study, Kohn-Sham density functional theory (DFT + U method) was used to examine the stability and speciation of the prevalent magnetite crystal face {111} in a wide range of pH and Eh conditions. The simulations reveal that the oxidation state and speciation of the surface depend strongly on imposed redox conditions and, in general, may differ from those of the bulk state. Corresponding predominant phase diagrams for the surface speciation and structure were calculated from first principles. Furthermore, classical molecular dynamics simulations were conducted investigating the mobility of water near the magnetite surface. The obtained knowledge of the surface structure and oxidation state of iron is essential for modeling retention of redox-sensitive nuclides.
Assuntos
Óxido Ferroso-Férrico , Ferro , Óxido Ferroso-Férrico/química , Ferro/química , Oxirredução , Minerais , ÁguaRESUMO
The ß-emitting 99 Tc isotope is a high-yield fission product in 235 U and 239 Pu nuclear reactors, raising special concern in nuclear waste management due to its long half-life and the high mobility of pertechnetate (TcO4 - ). Under the conditions of deep nuclear waste repositories, Tc is retained through biotic and abiotic reduction of TcO4 - to compounds like amorphous TcO2 â xH2 O precipitates. It is generally accepted that these precipitates have linear (Tc(µ-O)2 (H2 O)2 )n chains, with trans H2 O. Although corresponding Tc-Tc and Tc-O distances have been obtained from extended X-ray absorption fine structure (EXAFS) spectroscopy, this structure is largely based on analogy with other compounds. Here, we combine density-functional theory with EXAFS measurements of fresh and aged samples to show that, instead, TcO2 â xH2 O forms zigzag chains that undergo a slow aging process whereby they combine to form longer chains and, later, a tridimensional structure that might lead to a new TcO2 polymorph.
RESUMO
When in contact with oxidizing media, UO2 pellets used as nuclear fuel may transform into U4O9, U3O7, and U3O8. The latter starts forming by stress-induced phase transformation only upon cracking of the pristine U3O7 and is associated with a 36% volumetric expansion with respect to the initial UO2. This may pose a safety issue for spent nuclear fuel (SNF) management as it could imply a confinement failure and hence dispersion of radionuclides within the environment. In this work, UO2 with different grain sizes (representative of the grain size in different radial positions in the SNF) was oxidized in air at 300 °C, and the oxidation mechanisms were investigated using in situ synchrotron X-ray diffraction. The formation of U3O8 was detected only in UO2 pellets with larger grains (3.08 ± 0.06 µm and 478 ± 17 nm), while U3O8 did not develop in sintered UO2 with a grain size of 163 ± 9 nm. This result shows that, in dense materials, a sufficiently fine microstructure inhibits both the cracking of U3O7 and the subsequent formation of U3O8. Hence, the nanostructure prevents the material from undergoing significant volumetric expansion. Considering that the peripheral region of SNF is constituted by the high burnup structure, characterized by 100-300 nm-sized grains and micrometric porosity, these findings are relevant for a better understanding of the spent nuclear fuel behavior and hence for the safety of the nuclear waste storage.
RESUMO
The mobility of 79Se, a fission product of 235U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O42-) and selenite (Se(IV)O32-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.
Assuntos
Nanofios , Resíduos Radioativos , Compostos de Selênio , Selênio , Adsorção , Carvão Mineral , Óxido Ferroso-Férrico/química , Oxirredução , Ácido Selênico , Ácido Selenioso/química , Selênio/química , AçoRESUMO
ROBL-II provides four different experimental stations to investigate actinide and other alpha- and beta-emitting radionuclides at the new EBS storage ring of ESRF within an energy range of 3 to 35â keV. The XAFS station consists of a highly automatized, high sample throughput installation in a glovebox, to measure EXAFS and conventional XANES of samples routinely at temperatures down to 10â K, and with a detection limit in the sub-p.p.m. range. The XES station with its five bent-crystal analyzer, Johann-type setup with Rowland circles of 1.0 and 0.5â m radii provides high-energy resolution fluorescence detection (HERFD) for XANES, XES, and RIXS measurements, covering both actinide L and M edges together with other elements accessible in the 3 to 20â keV energy range. The six-circle heavy duty goniometer of XRD-1 is equipped for both high-resolution powder diffraction as well as surface-sensitive CTR and RAXR techniques. Single crystal diffraction, powder diffraction with high temporal resolution, as well as X-ray tomography experiments can be performed at a Pilatus 2M detector stage (XRD-2). Elaborate radioprotection features enable a safe and easy exchange of samples between the four different stations to allow the combination of several methods for an unprecedented level of information on radioactive samples for both fundamental and applied actinide and environmental research.
RESUMO
In view of safe management of the nuclear wastes, a sound knowledge of the atomic-scale properties of U1-xMxO2+y nanoparticles is essential. In particular, their cation valences and oxygen stoichiometries are of great interest as these properties drive their diffusion and migration behaviors into the environment. Here, we present an in-depth study of U1-xCexO2+y, over the full compositional domain, by combining X-ray diffraction and high-energy resolution fluorescence detection X-ray absorption near-edge structure. We show, on one hand, the coexistence of UIV, UV, and UVI and, on the other hand, that the fluorite structure is maintained despite this charge distribution.
RESUMO
Intrinsic properties of a compound (e.g., electronic structure, crystallographic structure, optical and magnetic properties) define notably its chemical and physical behavior. In the case of nanomaterials, these fundamental properties depend on the occurrence of quantum mechanical size effects and on the considerable increase of the surface to bulk ratio. Here, we explore the size dependence of both crystal and electronic properties of CeO2 nanoparticles (NPs) with different sizes by state-of-the art spectroscopic techniques. X-ray diffraction, X-ray photoelectron spectroscopy, and high-energy resolution fluorescence-detection hard X-ray absorption near-edge structure (HERFD-XANES) spectroscopy demonstrate that the as-synthesized NPs crystallize in the fluorite structure and they are predominantly composed of CeIV ions. The strong dependence of the lattice parameter with the NPs size was attributed to the presence of adsorbed species at the NPs surface thanks to Fourier transform infrared spectroscopy and thermogravimetric analysis measurements. In addition, the size dependence of the t2g states in the Ce LIII XANES spectra was experimentally observed by HERFD-XANES and confirmed by theoretical calculations.
RESUMO
99Tc(VII) uptake by synthetic pure pyrite at 21 °C was studied in a wide pH range from 3.50 to 10.50 using batch experiments combined with scanning electron microscopy, X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and Raman microscopy. We found that pyrite removes Tc quantitatively from solution (logâ¯Kd = 5.0 ± 0.1) within 1 day at pH ≥ 5.50 ± 0.08. At pH < 5.50 ± 0.08, the uptake process is slower, leading to 98% Tc removal (logâ¯Kd = 4.5 ± 0.1) after 35 days. The slower Tc uptake was explained by higher pyrite solubility under acidic conditions. After 2 months in contact with oxygen at pH 6.00 ± 0.07 and 10.00 ± 0.04, Tc was neither reoxidized nor redissolved. XAS showed that the uptake mechanism involves the reduction from Tc(VII) to Tc(IV) and subsequent inner-sphere complexation of Tc(IV)-Tc(IV) dimers onto a Fe oxide like hematite at pH 6.00 ± 0.07, and Tc(IV) incorporation into magnetite via Fe(III) substitution at pH 10.00 ± 0.04. Calculations of Fe speciation under the experimental conditions predict the formation of hematite at pH < 7.50 and magnetite at pH > 7.50, explaining the formation of the two different Tc species depending on the pH. XPS spectra showed the formation of TcSx at pH 10.00 ± 0.04, being a small fraction of a surface complex, potentially a transient phase in the total redox process.
Assuntos
Compostos Férricos , Ferro , Oxirredução , SulfetosRESUMO
The atomistic level understanding of iron speciation and the probable oxidative behavior of iron (Feaq2+ â Fesurf3+) in clay minerals are fundamental for environmental geochemistry of redox reactions. Thermodynamic analyses of wet chemistry data suggest that iron adsorbs on the edge surfaces of clay minerals at distinct structural sites commonly referred as strong and weak sites (with high and low affinity, respectively). In this study, we applied ab initio molecular dynamics simulation to investigate the structure and the stability of the edge surfaces of trans- and cis-vacant montmorillonites. These structures were further used to evaluate the surface complexation energy and to calculate reference ab initio X-ray absorption spectra (XAS) for distinct inner-sphere complexes of iron. The combination of ab initio simulations and XAS allowed us to reveal the Fe-complexation mechanism and to quantify the Fe partitioning between the high and low affinity sites as a function of the oxidation state and loadings. Although iron is mostly present in the Fe3+ form, Fe2+ increasingly co-adsorbs at increasing loadings. Ab initio structure relaxations of several different clay structures with substituted Fe2+/Fe3+ in the bulk or at the surface site showed that the oxidative sorption of ferrous iron is an energetically favored process at several edge surfaces of the Fe-bearing montmorillonite.
Assuntos
Bentonita , Ferro , Adsorção , Argila , Oxirredução , Espectroscopia por Absorção de Raios XRESUMO
A wide range of microorganisms have been shown to transform selenium-containing oxyanions to reduced forms of the element, particularly selenium-containing nanoparticles. Such reactions are promising for the detoxification of environmental contamination and the production of valuable selenium-containing products, such as nanoparticles for application in biotechnology. It has previously been shown that aerobic methane-oxidizing bacteria, including Methylococcus capsulatus (Bath), are able to perform the methane-driven conversion of selenite (SeO32-) to selenium-containing nanoparticles and methylated selenium species. Here, the biotransformation of selenite by Mc. capsulatus (Bath) has been studied in detail via a range of imaging, chromatographic, and spectroscopic techniques. The results indicate that the nanoparticles are produced extracellularly and have a composition distinct from that of nanoparticles previously observed from other organisms. The spectroscopic data from the methanotroph-derived nanoparticles are best accounted for by a bulk structure composed primarily of octameric rings in the form Se8 -x S x with an outer coat of cell-derived biomacromolecules. Among a range of volatile methylated selenium and selenium-sulfur species detected, methyl selenol (CH3SeH) was found only when selenite was the starting material, although selenium nanoparticles (both biogenic and chemically produced) could be transformed into other methylated selenium species. This result is consistent with methyl selenol being an intermediate in the methanotroph-mediated biotransformation of selenium to all the methylated and particulate products observed.IMPORTANCE Aerobic methane-oxidizing bacteria are ubiquitous in the environment. Two well-characterized strains, Mc. capsulatus (Bath) and Methylosinus trichosporium OB3b, representing gamma- and alphaproteobacterial methanotrophs, respectively, can convert selenite, an environmental pollutant, to volatile selenium compounds and selenium-containing particulates. Both conversions can be harnessed for the bioremediation of selenium pollution using biological or fossil methane as the feedstock, and these organisms could be used to produce selenium-containing particles for food and biotechnological applications. Using an extensive suite of techniques, we identified precursors of selenium nanoparticle formation and also found that these nanoparticles are made up of eight-membered mixed selenium and sulfur rings.
Assuntos
Nanopartículas Metálicas/química , Metanol/análogos & derivados , Methylococcaceae/metabolismo , Methylococcus capsulatus/metabolismo , Compostos Organosselênicos/metabolismo , Ácido Selenioso/metabolismo , Selênio/metabolismo , Biodegradação Ambiental , Biotecnologia , Biotransformação , Metano/metabolismo , Metanol/metabolismoRESUMO
Arsenic (As) is reported to be effectively sorbed onto natural organic matter (NOM) via thiol coordination and polyvalent metal cation-bridged ternary complexation. However, the extent of sorption via complexation with oxygen-containing functional groups of NOM is poorly understood. By equilibrating arsenite, arsenate, and monothioarsenate with purified model-peat, followed by As K-edge X-ray absorption spectroscopic analysis, this study shows that complexation with oxygen-containing functional groups can be an additional or alternative mode of As sorption to NOM. The extent of complexation was highest for arsenite, followed by monothioarsenate and arsenate. Complexation was higher at pH 7.0 compared to 4.5 for arsenite and arsenate and vice versa for monothioarsenate because of partial transformation to arsenite at pH 4.5. Modeling of the As K-edge extended X-ray absorption fine structure data revealed that As···C interatomic distances were relatively longer in arsenate- (2.83 ± 0.01 Å) and monothioarsenate-treated peat (2.80 ± 0.02 Å) compared to arsenite treatments (2.73 ± 0.01 Å). This study suggests that arsenite was predominantly complexed with carboxylic groups, whereas arsenate and monothioarsenate were complexed with alcoholic groups of the peat. This study further implies that in systems, where NOM is the major sorbent, arsenate and monothioarsenate can have higher mobility than arsenite.
Assuntos
Arsênio , Arsenitos , Arseniatos , Oxigênio , Espectroscopia por Absorção de Raios XRESUMO
Peatlands and other wetlands with abundant natural organic matter (NOM) are important sinks for antimony (Sb). While formation of Sb(III) sulfide phases or Sb(III) binding to NOM are discussed to decrease Sb mobility, the exact binding mechanisms remain elusive. Here, we reacted increasing sulfide concentrations with purified model peat at pH 6, forming reduced organic sulfur species, and subsequently equilibrated the reaction products with 50 µM of antimonite under anoxic conditions. Sulfur solid-phase speciation and the local binding environment of Sb were analyzed using X-ray absorption spectroscopy. We found that 85% of antimonite was sorbed by untreated peat. Sulfide-reacted peat increased sorption to 98%. Shell-by-shell fitting of Sb K-edge X-ray absorption fine structure spectra revealed Sb in untreated peat bound to carboxyl or phenol groups with average Sb-carbon distances of â¼2.90 Å. With increasing content of reduced organic sulfur, Sb was progressively coordinated to S atoms at distances of â¼2.45 Å and Sb-carbon distances of â¼3.33 Å, suggesting increasing Sb-thiol binding. Iterative target factor analysis allowed exclusion of reduced inorganic Sb-sulfur phases with similar Sb-sulfur distances. In conclusion, even when free sulfide concentrations are too low for formation of Sb-sulfur precipitates, peat NOM can sequester Sb in anoxic, sulfur-enriched environments.
Assuntos
Antimônio , Solo , Fenol , Fenóis , Compostos de SulfidrilaRESUMO
Peatlands and other wetlands are sinks for antimony (Sb), and solid natural organic matter (NOM) may play an important role in controlling Sb binding. However, direct evidence of Sb sequestration in natural peat samples is lacking. Here, we analyzed solid phase Sb, iron (Fe), and sulfur (S) as well as aqueous Sb speciation in three profiles up to a depth of 80 cm in a mine water impacted peatland in northern Finland. Linear combination fittings of extended X-ray absorption fine structure spectra showed that Sb binding to Fe phases was of minor importance and observed only in the uppermost layers of the peatland. Instead, the dominant (to almost exclusive) sequestration mechanism was Sb(III) binding to oxygen-containing functional groups, and at greater depths, increasingly Sb(III) binding to thiol groups of NOM. Aqueous Sb speciation was dominated by antimonate, while antimonite concentrations were low, further supporting our findings of much higher reactivity of Sb(III) than Sb(V) toward peat surfaces. Insufficient residence time for efficient reduction of antimonate to antimonite currently hinders higher Sb removal in the studied peatland. Overall, our findings imply that Sb(III) binding to solid NOM acts as an important sequestration mechanism under reducing conditions in peatlands and other high-organic matter environments.
Assuntos
Antimônio , Água , Finlândia , SoloRESUMO
Here we provide evidence that the formation of PuO2 nanoparticles from oxidized PuVI under alkaline conditions proceeds through the formation of an intermediate PuV solid phase, similar to NH4 PuO2 CO3 , which is stable over a period of several months. For the first time, state-of-the-art experiments at Pu M4 and at L3 absorption edges combined with theoretical calculations unambiguously allow to determine the oxidation state and the local structure of this intermediate phase.
RESUMO
This study investigates the incorporation of the minor actinide curium (Cm3+) in a series of synthetic La1- xGd xPO4 ( x = 0, 0.24, 0.54, 0.83, 1) monazite and rhabdophane solid-solutions. To obtain information on the incorporation process on the molecular scale and to understand the distribution of the dopant in the synthetic phosphate phases, combined time-resolved laser fluorescence spectroscopy and X-ray absorption fine structure spectroscopy investigations were conducted and complemented with ab initio atomistic simulations. We found that Cm3+ is incorporated in the monazite endmembers (LaPO4 and GdPO4) on one specific, highly ordered lattice site. The intermediate solid-solutions, however, display increasing disorder around the Cm3+ dopant as a result of random variations in nearest neighbor distances. In hydrated rhabdophane, and especially its La-rich solid-solutions, Cm3+ is preferentially incorporated on nonhydrated lattice sites. This site occupancy is not in agreement with the hydrated rhabdophane structure, where two-thirds of the lattice sites are associated with water of hydration (LnPO4·0.67H2O), implying that structural substitution reactions cannot be predicted based on the structure of the host matrix only.
RESUMO
Most materials expand with temperature because of the anharmonicity of lattice vibration, and only a few shrink with increasing temperature. UO2, whose thermal properties are of significant importance for the safe use of nuclear energy, was considered for a long time to belong to the first group. This view was challenged by recent in situ synchrotron X-ray diffraction measurements, showing an unusual thermal decrease of the U-O distances. This thermal shrinkage was interpreted as a consequence of the splitting of the U-O distances due to a change in the U local order from Fm3Ì m to Pa3Ì . In contrast to these previous investigations and using an element-specific synchrotron-based spectroscopic method, we show here that the U sublattice remains locally of the fluorite type from 50 to 1265 K, and that the decrease of the first U-O bond lengths is associated with an increase of the disorder.
RESUMO
For nuclear fuel related applications, the oxygen stoichiometry of mixed oxides U1-yMyO2±x is an essential property as it affects fuel properties and may endanger the safe operation of nuclear reactors. A careful review of the open literature indicates that this parameter is difficult to assess properly and that the nature of the defects, i.e., oxygen vacancies or UV, in aliovalent cation-doped UO2 is still subject to controversy. To confirm the formation of UV, we have investigated the room-temperature stable U1-yLayO2±x phase using several experimental methods (e.g., XRD, XANES, and NMR) confirmed by theoretical calculations. This paper presents the experimental proof of UV and its effect we identified in both electronic and local structure. We observe that UV is formed in quasi-equimolar proportion as LaIII in U1-yLayO2±x (y = 0.06, 0.11, and 0.22) solid solutions. The fluorite structure is maintained despite the cationic substitution, but the local structure is affected as variations of the interatomic distances are found. Therefore, we provide here the definitive proof that the substitution of UIV with LaIII is not accommodated by the creation of O vacancies as has often been assumed. The UO2 fluorite structure compensates the incorporation of an aliovalent cation by the formation of UV in quasi-equimolar proportions.
RESUMO
In peatlands, arsenite was reported to be effectively sequestered by sulfhydryl groups of natural organic matter. To which extent porewater arsenite can react with reduced sulfur to form thioarsenates and how this affects arsenic sequestration in peatlands is unknown. Here, we show that, in the naturally arsenic-enriched peatland Gola di Lago, Switzerland, up to 93% of all arsenic species in surface and porewaters were thioarsenates. The dominant species, monothioarsenate, likely formed from arsenite and zerovalent sulfur-containing species. Laboratory incubations with sulfide-reacted, purified model peat showed increasing total arsenic sorption with decreasing pH from 8.5 to 4.5 for both, monothioarsenate and arsenite. However, X-ray absorption spectroscopy revealed no binding of monothioarsenate via sulfhydryl groups. The sorption observed at pH 4.5 was acid-catalyzed dissociation of monothioarsenate, forming arsenite. The lower the pH and the more sulfhydryl sites, the more arsenite sorbed which in turn shifted equilibrium toward further dissociation of monothioarsenate. At pH 8.5, monothioarsenate was stable over 41 days. In conclusion, arsenic can be effectively sequestered by sulfhydryl groups in anoxic, slightly acidic environments where arsenite is the only arsenic species. At neutral to slightly alkaline pH, monothioarsenate can form and its slow transformation into arsenite and low affinity to sulfhydryl groups suggest that this species is mobile in such environments.
Assuntos
Arsênio , Arseniatos , Cinética , Solo , SuíçaRESUMO
Complex formation and the coordination of zirconium with acetic acid were investigated with Zr K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) and single-crystal diffraction. Zr K-edge EXAFS spectra show that a stepwise increase of acetic acid in aqueous solution with 0.1 M Zr(IV) leads to a structural rearrangement from initial tetranuclear hydrolysis species [Zr4(OH)8(OH2)16]8+ to a hexanuclear acetate species Zr6(O)4(OH)4(CH3COO)12. The solution species Zr6(O)4(OH)4(CH3COO)12 was preserved in crystals by slow evaporation of the aqueous solution. Single-crystal diffraction reveals an uncharged hexanuclear cluster in solid Zr6(µ3-O)4(µ3-OH)4(CH3COO)12·8.5H2O. EXAFS measurements show that the structures of the hexanuclear zirconium acetate cluster in solution and the solid state are identical.
RESUMO
The physicochemical properties of the potassium neptunate K2NpO4 have been investigated in this work using X-ray diffraction, X-ray absorption near edge structure (XANES) spectroscopy at the Np-L3 edge, and low-temperature heat capacity measurements. A Rietveld refinement of the crystal structure is reported for the first time. The Np(VI) valence state has been confirmed by the XANES data, and the absorption edge threshold of the XANES spectrum has been correlated to the Mössbauer isomer shift value reported in the literature. The standard entropy and heat capacity of K2NpO4 have been derived at 298.15 K from the low-temperature heat capacity data. The latter suggest the existence of a magnetic ordering transition around 25.9 K, most probably of the ferromagnetic type.