RESUMO
We present electrical properties of Schottky barrier diodes on room-temperature deposited amorphous zinc-tin-oxide (ZTO) with Zn/(Zn + Sn) contents between 0.12 and 0.72. A combinatorial approach with continuous composition spread pulsed laser deposition is used to achieve the wide range of compositions with four samples each on 50 × 50 mm2 glass substrates. The Schottky barrier contacts were fabricated by the reactive direct-current sputtering of platinum. Best diode properties (rectification ratio SV = 2.7 × 107, ideality factor η = 1.05, and effective barrier height ÏB,eff = 1.25 eV) are obtained for a composition of 0.63 Zn/(Zn + Sn). Aging on the timescale of days and months is observed that leads to improved device properties (higher rectifications and lower ideality factors). In particular, the diodes with the lowest performance in the as-prepared state show the biggest improvements. The best diode properties after the aging process (SV = 3.9 × 107, η = 1.12, and ÏB,eff = 1.31 eV) were also observed for 0.63 Zn/(Zn + Sn).
RESUMO
Continuous composition spread (CCS) methods allow fast and economic exploration of composition dependent properties of multielement compounds. Here, a CCS method was applied for room temperature pulsed laser deposition (PLD) of amorphous zinc-tin-oxide to gain detailed insight into the influence of the zinc-to-tin cation ratio on optical and electrical properties of this ternary compound. Our CCS approach for a large-area offset PLD process utilizes a segmented target and thus makes target exchange or movable masks in the PLD chamber obsolete. Cation concentrations of 0.08-0.82 Zn/(Zn + Sn) were achieved across single 50 × 50 mm(2) glass substrates. The electrical conductivity increases for increasing tin content, and the absorption edge shifts to lower energies. The free carrier concentration can be tuned from 10(20) to 10(16) cm(-3) by variation of the cation ratio from 0.1 to 0.5 Zn/(Zn + Sn).