Effect of Ethylcellulose on the Rheology and Mechanical Heterogeneity of Asphaltene Films at the Oil-Water Interface.

Asphaltenes are surface-active molecules that exist naturally in crude oil. They adsorb at the water-oil interface and form viscoelastic interfacial films that stabilize emulsion droplets, making water-oil separation extremely challenging. There is, thus, a need for chemical demulsifiers to disrupt the interfacial asphaltene films, and, thereby, facilitate water-oil separation. Here, we examine ethylcellulose (EC) as a model demulsifier and measure its impact on the interfacial properties of asphaltene films using interfacial shear microrheology. When EC is mixed with an oil and asphaltene solution, it retards the interfacial stiffening that occurs between the oil phase in contact with a water phase. Moreover, EC introduces relatively weak regions within the film. When EC is introduced to a pre-existing asphaltene film, the stiffness of the films decreases abruptly and significantly. Direct visualization of interfacial dynamics further reveals that EC acts inhomogeneously, and that relatively soft regions in the initial film are seen to expand. This mechanism likely impacts emulsion destabilization and provides new insight to the process of demulsification.

A Robust Oil-in-Oil Emulsion for the Nonaqueous Encapsulation of Hydrophilic Payloads.

Compartmentalized structures widely exist in cellular systems (organelles) and perform essential functions in smart composite materials (microcapsules, vasculatures, and micelles) to provide localized functionality and enhance materials' compatibility. An entirely water-free compartmentalization system is of significant value to the materials community as nonaqueous conditions are critical to packaging microcapsules with water-free hydrophilic payloads while avoiding energy-intensive drying steps. Few nonaqueous encapsulation techniques are known, especially when considering just the scalable processes that operate in batch mode. Herein, we report a robust oil-in-oil Pickering emulsion system that is compatible with nonaqueous interfacial reactions as required for encapsulation of hydrophilic payloads. A major conceptual advance of this work is the notion of the partitioning inhibitor-a chemical agent that greatly reduces the payload's distribution between the emulsion's two phases, thus providing appropriate conditions for emulsion-templated interfacial polymerization. As a specific example, an immiscible hydrocarbon-amine pair of liquids is emulsified by the incorporation of guanidinium chloride (GuHCl) as a partitioning inhibitor into the dispersed phase. Polyisobutylene (PIB) is added into the continuous phase as a viscosity modifier for suitable modification of interfacial polymerization kinetics. The combination of GuHCl and PIB is necessary to yield a robust emulsion with stable morphology for 3 weeks. Shell wall formation was accomplished by interfacial polymerization of isocyanates delivered through the continuous phase and polyamines from the droplet core. Diethylenetriamine (DETA)-loaded microcapsules were isolated in good yield, exhibiting high thermal and chemical stabilities with extended shelf-lives even when dispersed into a reactive epoxy resin. The polyamine phase is compatible with a variety of basic and hydrophilic actives, suggesting that this encapsulation technology is applicable to other hydrophilic payloads such as polyols, aromatic amines, and aromatic heterocyclic bases. Such payloads are important for the development of extended pot or shelf life systems and responsive coatings that report, protect, modify, and heal themselves without intervention.

Interfacial Rheology and Heterogeneity of Aging Asphaltene Layers at the Water-Oil Interface.

Surface-active asphaltene molecules are naturally found in crude oil, causing serious problems in the petroleum industry by stabilizing emulsion drops, thus hindering the separation of water and oil. Asphaltenes can adsorb at water-oil interfaces to form viscoelastic interfacial films that retard or prevent coalescence. Here, we measure the evolving interfacial shear rheology of water-oil interfaces as asphaltenes adsorb. Generally, interfaces stiffen with time, and the response crosses over from viscous-dominated to elastic-dominated. However, significant variations in the stiffness evolution are observed in putatively identical experiments. Direct visualization of the interfacial strain field reveals significant heterogeneities within each evolving film, which appear to be an inherent feature of the asphaltene interfaces. Our results reveal the adsorption process and aged interfacial structure to be more complex than that previously described. The complexities likely impact the coalescence of asphaltene-stabilized droplets, and suggest new challenges in destabilizing crude oil emulsions.

Discovery of a tetracontinuous, aqueous lyotropic network phase with unusual 3D-hexagonal symmetry.

Network phase aqueous lyotropic liquid crystals (LLCs) are technologically useful materials with myriad applications in chemistry, biology, and materials science, which stem from their structurally periodic aqueous and hydrophobic nanodomains (∼0.7-5.0 nm in diameter) that are lined with well-defined chemical functionalities. The exclusive observation of bicontinuous cubic network phase LLCs (e.g., double gyroid, double diamond, and primitive phases) has fueled speculations that all stable LLC network phases must exhibit cubic symmetry. Herein, we describe the self-assembly behavior of a simple aliphatic gemini surfactant that forms the first example of a triply periodic network phase LLC with the 3D-hexagonal symmetry P63/mcm (space group #193). This normal, tetracontinuous 3D-hexagonal network LLC phase HI(193) partitions space into four continuous and interpenetrating, yet non-intersecting volumes. This discovery directly demonstrates that the gemini amphiphile platform furnishes a rational strategy for discovering and stabilizing new, three-dimensionally periodic multiply continuous network phase LLCs with variable symmetries and potentially new applications.

Unexpected consequences of block polydispersity on the self-assembly of ABA triblock copolymers.

Controlled/"living" polymerizations and tandem polymerization methodologies offer enticing opportunities to enchain a wide variety of monomers into new, functional block copolymer materials with unusual physical properties. However, the use of these synthetic methods often introduces nontrivial molecular weight polydispersities, a type of chain length heterogeneity, into one or more of the copolymer blocks. While the self-assembly behavior of monodisperse AB diblock and ABA triblock copolymers is both experimentally and theoretically well understood, the effects of broadening the copolymer molecular weight distribution on block copolymer phase behavior are less well-explored. We report the melt-phase self-assembly behavior of SBS triblock copolymers (S = poly(styrene) and B = poly(1,4-butadiene)) comprised of a broad polydispersity B block (M(w)/M(n) = 1.73-2.00) flanked by relatively narrow dispersity S blocks (M(w)/M(n) = 1.09-1.36), in order to identify the effects of chain length heterogeneity on block copolymer self-assembly. Based on synchrotron small-angle X-ray scattering and transmission electron microscopy analyses of seventeen SBS triblock copolymers with poly(1,4-butadiene) volume fractions 0.27 ≤ f(B) ≤ 0.82, we demonstrate that polydisperse SBS triblock copolymers self-assemble into periodic structures with unexpectedly enhanced stabilities that greatly exceed those of equivalent monodisperse copolymers. The unprecedented stabilities of these polydisperse microphase separated melts are discussed in the context of a complete morphology diagram for this system, which demonstrates that narrow dispersity copolymers are not required for periodic nanoscale assembly.