D-dimer in Marfan syndrome: effect of obstructive sleep apnea induced blood pressure surges.

Aortic dissection and rupture are the major causes of premature death in persons with Marfan syndrome (MFS), a rare genetic disorder featuring cardiovascular, skeletal, and ocular impairments. We and others have found that obstructive sleep apnea (OSA) confers significant vascular stress in this population and may accelerate aortic disease progression. We hypothesized that D-dimer, a diagnostic biomarker for several types of vascular injury that is also elevated in persons with MFS with aortic enlargement, may be sensitive to cardiovascular stresses caused by OSA. To test this concept, we recruited 16 persons with MFS without aortic dissection and randomized them to two nights of polysomnography, without (baseline) and with OSA treatment: continuous positive airway pressure (CPAP). In addition to scoring OSA by the apnea-hypopnea index (AHI), beat-by-beat systolic BP (SBP) and pulse-pressure (PP) fluctuations were quantified. Morning blood samples were also assayed for D-dimer levels. In this cohort (male:female, 10:6; age, 36 ± 13 yr; aortic diameter, 4 ± 1 cm), CPAP eliminated OSA (AHI: 20 ± 17 vs. 3 ± 2 events/h, P = 0.001) and decreased fluctuations in SBP (13 ± 4 vs. 9 ± 3 mmHg, P = 0.011) and PP (7 ± 2 vs. 5 ± 2 mmHg, P = 0.013). CPAP also reduced D-dimer levels from 1,108 ± 656 to 882 ± 532 ng/mL (P = 0.023). Linear regression revealed a positive association between the maximum PP during OSA and D-dimer in both the unadjusted (r = 0.523, P = 0.038) and a model adjusted for contemporaneous aortic root diameter (r = 0.733, P = 0.028). Our study revealed that overnight CPAP reduces D-dimer levels commensurate with the elimination of OSA and concomitant hemodynamic fluctuations. Morning D-dimer measurements together with OSA screening might serve as predictors of vascular injury in MFS.NEW & NOTEWORTHY What is New? Surges in blood pressure caused by obstructive sleep apnea during sleep increase vascular stress and D-dimer levels in Marfan syndrome. Elevations in D-dimer can be lowered with CPAP. What is Noteworthy? D-dimer levels might serve as a marker for determining the significance of obstructive sleep apnea in persons with Marfan syndrome. D-dimer or obstructive sleep apnea screening is a potential method to identify persons with Marfan syndrome at risk for adverse cardiovascular events.

Effects of nasal high flow on sympathovagal balance, sleep, and sleep-related breathing in patients with precapillary pulmonary hypertension.

BACKGROUND: In precapillary pulmonary hypertension (PH), nasal high flow therapy (NHF) may favorably alter sympathovagal balance (SVB) and sleep-related breathing through washout of anatomical dead space and alleviation of obstructive sleep apnea (OSA) due to generation of positive airway pressure. OBJECTIVES: To investigate the effects of NHF on SVB, sleep, and OSA in patients with PH, and compare them with those of positive airway pressure therapy (PAP). METHODS: Twelve patients with PH (Nice class I or IV) and confirmed OSA underwent full polysomnography, and noninvasive monitoring of SVB parameters (spectral analysis of heart rate, diastolic blood pressure variability). Study nights were randomly split into four 2-h segments with no treatment, PAP, NHF 20 L/min, or NHF 50 L/min. In-depth SVB analysis was conducted on 10-min epochs during daytime and stable N2 sleep at nighttime. RESULTS: At daytime and compared with no treatment, NHF20 and NHF50 were associated with a flow-dependent increase in peripheral oxygen saturation but a shift in SVB towards increased sympathetic drive. At nighttime, NHF20 was associated with increased parasympathetic drive and improvements in sleep efficiency, but did not alter OSA severity. NHF50 was poorly tolerated. PAP therapy improved OSA but had heterogenous effects on SVB and neutral effects on sleep outcomes. Hemodynamic effects were neutral for all interventions. CONCLUSIONS: In sleeping PH patients with OSA NHF20 but not NHF50 leads to decreased sympathetic drive likely due to washout of anatomical dead space. NHF was not effective in lowering the apnea-hypopnoea index and NHF50 was poorly tolerated.

Effects of nasal high flow on nocturnal hypercapnia, sleep, and sympathovagal balance in patients with neuromuscular disorders.

PURPOSE: In neuromuscular disorders (NMD), inspiratory muscle weakness may cause sleep-related hypoventilation requiring non-invasive ventilation (NIV). Alternatively, nasal high flow therapy (NHF) may ameliorate mild nocturnal hypercapnia (NH) through washout of anatomical dead space and generation of positive airway pressure. Ventilatory support by NIV or NHF might have favourable short-term effects on sympathovagal balance (SVB). This study comparatively investigated the effects of NHF and NIV on sleep-related breathing and SVB in NMD patients with evolving NH. METHODS: Transcutaneous CO2 (ptcCO2), peripheral oxygen saturation (SpO2), sleep outcomes and SVB (spectral analysis of heart rate, diastolic blood pressure variability) along with haemodynamic measures (cardiac index, total peripheral resistance index) were evaluated overnight in 17 patients. Polysomnographies (PSG) were randomly split into equal parts with no treatment, NIV and NHF at different flow rates (20 l/min vs. 50 l/min). In-depth analysis of SVB and haemodynamics was performed on 10-min segments of stable N2 sleep taken from each intervention. RESULTS: Compared with no treatment, NHF20 and NHF50 did not significantly change ptcCO2, SpO2 or the apnea hypopnea index (AHI). NHF50 was poorly tolerated. In contrast, NIV significantly improved both gas exchange and AHI without adversely affecting sleep. During daytime, NHF20 and NHF50 had neutral effects on ventilation and oxygenation whereas NIV improved ptcCO2 and SpO2. Effects of NIV and NHF on SVB and haemodynamics were neutral during both night and daytime. CONCLUSIONS: NHF does not correct sleep-disordered breathing in NMD patients with NH. Both NHF and NIV exert no immediate effects on SVB.

Evaluation of low-viscosity bulk-fill composites regarding marginal and internal adaptation.

This study aimed at evaluating the marginal and internal adaptation of low-viscosity bulk-fill composites to enamel and dentin using a self-etch or an etch-and-rinse adhesive without and with artificial ageing. Hundred and twenty-eight MOD cavities in extracted molars were assigned to eight groups (n = 16), restored with the adhesives OptiBond FL (OFL) or Xeno V+ (X) and two low-viscosity bulk-fill composites SDR or x-tra base, covered with Premise. Tetric EvoCeram Bulk Fill and Premise served as a control. n = 8 per group were subjected to prolonged water storage (180 days) and thermocycling (2500×). Scanning electron microscopy was used to determine marginal gaps (MG) and interfacial adhesive defects (IAD). There were no significant differences between composite types in 44 out of 48 (MG) or 43/48 (IAD) comparisons. More MG were observed with X than with OFL (14 out of 16 comparisons, two significant), while in 16 of 16 comparisons with X more IAD were observed (14 significant). After artificial ageing, MG generally increased (9/16 significant), compared to IAD (one significant). The performance of the investigated composite types concerning the integrity of the tooth-composites interface was comparable. Compared to the 1-step self-etch system, the bond with the 3-step etch-and-rinse adhesive was raised.

High resolution three-dimensional imaging and measurement of lung, heart, liver, and diaphragmatic development in the fetal rat based on micro-computed tomography (micro-CT).

Understanding of normal fetal organ development is crucial for the evaluation of the pathogenesis of congenital anomalies. Various techniques have been used to generate imaging of fetal rat organogenesis, such as histological dissection with 3-dimensional reconstruction and scanning electron microscopy. However, these techniques did not imply quantitative measurements of developing organs (volumes, surface areas of organs). Furthermore, a partial or total destruction of the embryos prior to analysis was inevitable. Recently, micro-computed tomography (micro-CT) has been established as a novel tool to investigate embryonic development in non-dissected embryos of rodents. In this study, we used the micro-CT technique to generate 4D datasets of rat embryos aged between embryonic day 15-22 and newborns. Lungs, hearts, diaphragms, and livers were digitally segmented in order to measure organ volumes and analyze organ development as well as generate high-resolution 3D images. These data provide objective values compiling a 4D atlas of pulmonary, cardiac, diaphragmatic, and hepatic development in the fetal rat.

Research Priorities in Pathophysiology for Sleep-disordered Breathing in Patients with Chronic Obstructive Pulmonary Disease. An Official American Thoracic Society Research Statement.

BACKGROUND: Obstructive sleep apnea (OSA) and chronic obstructive pulmonary disease (COPD) are common conditions; the co-occurrence of these diseases, called the overlap syndrome (OVS), has been associated with poor health outcomes. PURPOSE: The purpose of this Official American Thoracic Society Research Statement is to describe pathophysiology, epidemiology, outcomes, diagnostic metrics, and treatment of OVS, as well as to identify important gaps in knowledge and make recommendations for future research. METHODS: Clinicians and researchers with expertise in sleep medicine, pulmonary medicine, or both were invited to participate. Topics were divided among the participants according to their interest and expertise. A literature search was conducted; the search was not a formal systematic review. Evidence was considered and supplemented with the panelists' nonsystematic clinical observations. Important knowledge gaps were identified. RESULTS: Recommendations for research to fill existing knowledge gaps were made. The recommendations were formulated by discussion and consensus. CONCLUSIONS: Many important questions about OVS exist. This American Thoracic Society Research Statement highlights the types of research that leading clinicians and researchers believe will have the greatest impact on better understanding the spectrum of disease, improving diagnosis, and optimizing therapy.

Visualization of the pulp chamber roof and residual dentin thickness by spectral-domain optical coherence tomography in vitro.

The aim of this study was to evaluate the ability of spectral-domain optical coherence tomography (SD-OCT) to display the roof of the pulp chamber and to estimate the residual dentin thickness (RDT) of the pulp complex. The roots of 20 extracted human molars were embedded in epoxy resin, and crowns were longitudinally sectioned in the mesial-distal direction, exposing the pulp chamber. The coronal part of the crown was removed up to an RDT to the pulp chamber roof of 2 mm. Samples were imaged by SD-OCT from coronal view and by light microscopy (LM) in the sagittal plane. Using a microtome, dentin was subsequently removed in four levels from the occlusal aspect in steps of 250 µm. At each level, RDT was documented and measured by both methods. The data were compared (Spearman's rho correlation coefficient, Wilcoxon signed-rank test). Using OCT, the roof of the pulp chamber was first displayed at a maximum RDT of 1.94 mm. The minimal RDT that could be imaged by OCT was 0.06 mm. Values from both methods were strongly correlated (r, 0.83-0.95; pi ≤ 0.05) and differed significantly for large RDTs (dentin levels 1, 2; pi < 0.05) but not for small RDTs (levels 3, 4; pi ≥ 0.226). The roof of the dental pulp chamber could be already visualized by SD-OCT with a RDT of 1.94 mm. Therefore, the method could be a useful diagnostic tool during the preparation of deep dentin cavities and might help to preserve the integrity of the pulp chamber.

Correction to: Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

In the original publication of the article the paragraph "The four resin-based composites…" appearing below the "Materials and methods" section is incomplete. The correct paragraph is provided in this correction below.

Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

The aim of this study was to evaluate internal and marginal adaptation of high-viscosity bulk-fill composites to enamel and dentin with a self-etch (SE) and an etch-and-rinse adhesive (ER) without and with artificial aging. 128 MOD cavities in extracted human molars were prepared, randomly assigned to 8 groups (n = 16), bonded with either OptiBond FL (OFL, ER) or Xeno V+ (X, SE), and restored in 4 mm horizontal bulk layers with SonicFill (SF), Tetric EvoCeram Bulk fill (TEC), and x-tra fil (XF). Incremental layering technique with Premise (P) served as control. Half of the specimens each (n = 8) were subjected either to water storage (1 day, 37 °C) or prolonged storage (180 days) and thereafter thermocycling. Replicas were analyzed for marginal gap formation. After sectioning, interfacial adhesive defects were assessed. Results were statistical analyzed. (1) Internal adaptation: Except for TEC/OFL at enamel without artificial aging, no significant differences between bulk-fill composites and the control were observed. All groups at dentin with OFL showed less internal adhesive defects than that with X (p < 0.05). (2) Marginal adaptation: No significant differences were observed between bulk-fill composites and control except for P after artificial aging (p > 0.05). All other composites, regardless of artificial aging, formed significantly more marginal gaps at enamel with X compared to with OFL (p ≤ 0.05). Simplified restorations with high-viscosity bulk-fill composite showed comparable internal and marginal adaptation to incrementally placed fillings. A superiority of the 3-step ER approach was seen compared to the 1-step SE adhesive irrespective of the bulk-fill composite used.

Reductions in dead space ventilation with nasal high flow depend on physiological dead space volume: metabolic hood measurements during sleep in patients with COPD and controls.

Nasal high flow (NHF) reduces minute ventilation and ventilatory loads during sleep but the mechanisms are not clear. We hypothesised NHF reduces ventilation in proportion to physiological but not anatomical dead space.11 subjects (five controls and six chronic obstructive pulmonary disease (COPD) patients) underwent polysomnography with transcutaneous carbon dioxide (CO2) monitoring under a metabolic hood. During stable non-rapid eye movement stage 2 sleep, subjects received NHF (20 L·min-1) intermittently for periods of 5-10 min. We measured CO2 production and calculated dead space ventilation.Controls and COPD patients responded similarly to NHF. NHF reduced minute ventilation (from 5.6±0.4 to 4.8±0.4 L·min-1; p<0.05) and tidal volume (from 0.34±0.03 to 0.3±0.03 L; p<0.05) without a change in energy expenditure, transcutaneous CO2 or alveolar ventilation. There was a significant decrease in dead space ventilation (from 2.5±0.4 to 1.6±0.4 L·min-1; p<0.05), but not in respiratory rate. The reduction in dead space ventilation correlated with baseline physiological dead space fraction (r2=0.36; p<0.05), but not with respiratory rate or anatomical dead space volume.During sleep, NHF decreases minute ventilation due to an overall reduction in dead space ventilation in proportion to the extent of baseline physiological dead space fraction.

Optical coherence tomography to evaluate variance in the extent of carious lesions in depth.

Evaluation of variance in the extent of carious lesions in depth at smooth surfaces within the same ICDAS code group using optical coherence tomography (OCT) in vitro and in vivo. (1) Verification/validation of OCT to assess non-cavitated caries: 13 human molars with ICDAS code 2 at smooth surfaces were imaged using OCT and light microscopy. Regions of interest (ROI) were categorized according to the depth of carious lesions. Agreement between histology and OCT was determined by unweighted Cohen's Kappa and Wilcoxon test. (2) Assessment of 133 smooth surfaces using ICDAS and OCT in vitro, 49 surfaces in vivo. ROI were categorized according to the caries extent (ICDAS: codes 0-4, OCT: scoring based on lesion depth). A frequency distribution of the OCT scores for each ICDAS code was determined. (1) Histology and OCT agreed moderately (κ = 0.54, p ≤ 0.001) with no significant difference between both methods (p = 0.25). The lesions (76.9% (10 of 13)) _were equally scored. (2) In vitro, OCT revealed caries in 42% of ROI clinically assessed as sound. OCT detected dentin-caries in 40% of ROIs visually assessed as enamel-caries. In vivo, large differences between ICDAS and OCT were observed. Carious lesions of ICDAS codes 1 and 2 vary largely in their extent in depth.

Independent associations between arterial bicarbonate, apnea severity and hypertension in obstructive sleep apnea.

BACKGROUND: Obstructive sleep apnea is characterized by intermittent hypoxia and hypercapnia. CO2 production, transport and elimination are influenced by the carbonic anhydrase enzyme. We hypothesized that elevated standard bicarbonate, a proxy for increased carbonic anhydrase activity, is associated with apnea severity and higher blood pressure in patients with obstructive sleep apnea. METHODS: A retrospective analysis of a sleep apnea cohort (n = 830) studied by ambulatory polygraphy. Office systolic/diastolic blood pressure, lung function, and arterial blood gases were assessed during daytime. RESULTS: Arterial standard bicarbonate was increased with apnea severity (mild/moderate/severe 24.1 ± 1.8, 24.4 ± 1.7 and 24.9 ± 2.9 mmol/l, respectively, Kruskal-Wallis test p < 0.001). Standard bicarbonate was independently associated with apnea hypopnea index after adjustment for sex, age, body mass index, smoking, alcohol, hypertension, pO2 and pCO2 (standard bicarbonate quartile 1 vs. quartile 4, ß = 10.6, p < 0.001). Log-transformed standard bicarbonate was associated with a diagnosis of hypertension or diastolic blood pressure but not systolic blood pressure adjusting for cofounders (p = 0.007, 0.048 and 0.45, respectively). CONCLUSIONS: There was an independent association between sleep apnea severity and arterial standard bicarbonate. The link between high standard bicarbonate and daytime hypertension suggests that carbonic anhydrase activity may constitute a novel mechanism for blood pressure regulation in sleep apnea.

REM Sleep Imposes a Vascular Load in COPD Patients Independent of Sleep Apnea.

Arterial stiffness, a marker for cardiovascular risk, is increased in patients with Chronic Obstructive Pulmonary Disease (COPD) and Obstructive Sleep Apnea (OSA). The specific influence of both on arterial stiffness during sleep is unknown. Nocturnal arterial stiffness (Pulse Propagation Time (PPT) of the finger pulse wave) was calculated in 142 individuals evaluated for sleep apnea: 27 COPD patients (64.7 ± 11y, 31.2 ± 8 kg/m2), 72 patients with cardiovascular disease (CVD group, 58.7 ± 13y, 33.6 ± 6 kg/m2) and 43 healthy controls (HC group 49.3 ± 12y, 27.6 ± 3 kg/m2). Sleep stage related PPT changes were assessed in a subsample of COPD patients and matched controls (n = 12/12). Arterial stiffness during sleep was increased in COPD patients (i.e. shortened PPT) compared to healthy controls (158.2 ± 31 vs. 173.2 ± 38 ms, p = 0.075) and to patients with CVD (161.4 ± 41 ms). Arterial stiffening was particular strong during REM sleep (145.9 ± 28 vs. 172.4 ± 43 ms, COPD vs. HC, p = 0.003). In COPD, time SaO2 < 90% was associated with reduced arterial stiffness (Beta +1.7 ms (1.1-2.3)/10 min, p < 0.001). Sleep apnea did not affect PPT. In COPD, but not in matched controls, arterial stiffness increased from wakefulness to REM-sleep (ΔPPT-8.9 ± 10% in COPD and 3.7 ± 12% in matched controls, p = 0.021). Moreover, REM-sleep related arterial stiffening was correlated with elevated daytime blood pressure (r = -0.92, p < 0.001) and increased myocardial oxygen consumption (r = -0.88, p < 0.01). Hypoxia and REM sleep modulate arterial stiffness. In contrast to healthy controls, REM sleep imposes a vascular load in COPD patients independent of sleep apnea indices, intermittent and sustained hypoxia. The link between REM-sleep, vascular stiffness and daytime cardiovascular function suggests that REM-sleep plays a role for increased cardiovascular morbidity of COPD patients.

Multi-center safety and efficacy study of a negative-pressure intraoral device in obstructive sleep apnea.

BACKGROUND: Intraoral devices, with or without negative oral pressure, can stabilize the oropharynx and reduce obstructive sleep apneas. We tested the hypothesis that treatment with the iNAP® Sleep Therapy System, which applies negative oral pressure through an intra-oral appliance, would reduce the severity of obstructive sleep apnea in a multi-center, prospective, first-night-randomized-order cross-over study. METHODS/PATIENTS: 130 patients fulfilled the entry criteria (age <75, AHI 15-55, BMI <33), and 63 entered the primary endpoint cohort (Total Sleep Time ≥4 h/night on the baseline polysomnogram and an oral negative vacuum time maintained by iNAP® ≥ 4 h/night and total sleep time ≥4 h/night during the first treatment study). 54 patients completed a second treatment sleep study at least 28 days after the first sleep study. RESULTS: Among the primary endpoint cohort (n = 63, age = 53.2 ± 11.3, BMI = 27.1 ± 2.8), 33 patients (52 %; 95 % confidence interval = 40%-64 %, p < 0.001) responded to iNAP treatment according to the Sher criteria (>50 % reduction in AHI and an AHI ≤20 events/hr). The average oxy-hemoglobin saturation increased by 1-2%, and the average percent oxygen desaturation decreased (was less severe) by 1 % while using the iNAP device. The incidence of adverse events, all self-limited, was low. The reduction in the apnea-hypopnea index was durable over the 28-day study. Patients used iNAP on average 5.6 h per night during the study period. CONCLUSION: The iNAP® Sleep Therapy System achieved a durable benefit in more than half the patients with moderate to severe obstructive sleep apnea and may be considered in patients who object to or failed continuous positive airway pressure. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT02698059.

Tooth-composite bond failure with a universal and an etch-and-rinse adhesive depending on mode and frequency of application.

OBJECTIVES: To evaluate the effect of an additional layer of universal adhesive on the interfacial enamel/dentin-composite gap formation in relation to application mode and aging, via spectral domain optical coherence tomography (SD-OCT) and scanning electron microscopy (SEM). METHODS: In vitro class V cavities in 114 caries-free premolars were restored by applying one or two layers of a universal adhesive (Scotchbond Universal, SBU) in self-etch (se) and etch-and-rinse (er) mode or the reference adhesive OptiBond FL (OFL-er). The restorations were imaged by SD-OCT (six groups, n = 8) and SEM (n = 3) directly after filling (t1), water storage (t2, 24 h), embedding (t3), and thermo-mechanical loading (t4, TCML). The interfacial gaps were quantified using 26 parameters and analyzed using principal component analysis and linear mixed effect models. RESULTS: Gap formation at enamel and dentin was significantly influenced by the adhesive, the application mode and number of layers (p < 0.001). This was due to the influence of the SBU-er mode (p < 1e-05), which showed significantly more gap formation and a greater range of variation with double application when compared to SBU-se and OFL. The fewest interfacial gaps occurred with one or two applications of OFL-er and one layer of SBU-er. SIGNIFICANCE: Adhesive application mode and the number of adhesive layers are relevant factors in the tooth-composite bond failure. Double application worsened the adaptation of SBU to freshly prepared dentin conditioned with phosphoric acid.

Effects of nasal insufflation on arterial gas exchange and breathing pattern in patients with chronic obstructive pulmonary disease and hypercapnic respiratory failure.

High flow nasal insufflations (NI) can improve gas exchange and alleviate dyspnea in patients with acute respiratory failure. In the present study we investigated the effects of high flow nasal insufflations in COPD patients with chronic hypercapnic respiratory failure (HRF). Seventeen patients with severe COPD and HRF were recruited. We delivered a mixture of 20 L/min room air and 2 L/min O(2) through a nasal cannula either into both nostrils (NI) or into one nostril (Partial NI). Respiratory pattern and PaCO(2) responses under NI were compared with low flow oxygen of 2 L/min. High flow nasal insufflations led to a systematic reduction in respiratory rate from 19.8 ± 4.2 at baseline to 18.0 ± 4.7 during NI (p < 0.008) and 18.1 ± 5.2 breaths/min during Partial NI (P < 0.03). The mean group inspiratory duty cycle (T(I)/T(T)) and mean group PaCO(2) remained constant between all experimental conditions. Individual responses to NI were heterogeneous: six patients demonstrated marked reductions in respiratory rate (>20% fall from baseline), another group (n = 6) demonstrated no change in respiratory rate but marked reductions in arterial carbon dioxide of more than 8 mmHg. In conclusion, high flow (20 L/min) nasal insufflations of warm and humidified air during wakefulness for 45 min reduced respiratory rate without deterioration of hypercapnia. Our data indicate that high flow NI improved efficiency of breathing and may be used as an adjunct to low flow oxygen for preventing hypercapnic respiratory failure in severely ill COPD patients.

Experimental and clinical evaluation of a self-etching and an etch-and-rinse adhesive system.

PURPOSE: To assess the one-step self-etching adhesive iBond Gluma inside (1-SE) and the two-step etch-and rinse adhesive Gluma Comfort Bond (2-ER), both used in combination with the fine particle hybrid composite Venus, in a laboratory and in a prospective clinical study. MATERIALS AND METHODS: In the in vitro study, tooth-composite interaction, microleakage, and adhesive failure of 8 Class V restorations per system were evaluated by light and scanning electron microscopy. In the in vivo study, 90 paired Class III/IV restorations were scored over 48 months (modified USPHS criteria). Cumulative failure rates (CFR) were calculated. RESULTS: In vitro, microleakage and adhesive failure at enamel margins were significantly increased with 1-SE in comparison with 2-ER. With 1-SE, micromechanical interlocking at enamel was reduced and pores within the adhesive layer arose. In vivo, after 48 months with 1-SE, decreased marginal integrity and an increased number of dark marginal color lines were observed. CONCLUSION: Because the results of the 4-year clinical study showed lower esthetics and marginal integrity for the 1-SE adhesive, its use should be viewed critically, which is in line with the reduced enamel-adhesive-composite interaction found in vitro.

Effect of the Adhesive Strategy on Clinical Performance and Marginal Integrity of a Universal Adhesive in Non-Carious Cervical Lesions in a Randomized 36-Month Study.

The effectiveness of a universal adhesive applied in three application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA) over 36 months. In 50 patients, three (n = 21) or four (n = 29) non-carious cervical lesions (NCCL) were restored with Venus® Diamond Flow (Kulzer GmbH, Hanau, Germany). The adhesive iBond® Universal (iBU, Kulzer, Germany) was used in self-etch (SE), etch-and-rinse (ER), or selective-enamel-etch mode (SEE). The etch-and-rinse adhesive OptiBondTM FL served as a control (OFL, Kerr GmbH, Herzogenrath, Germany). The restorations were clinically assessed (FDI criteria) at 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. FDI criteria and marginal gap and perfect margin were compared between and within groups and recalls using McNemar, Wilcoxon, or Mann-Whitney U-tests (α = 0.05). Starting with 12 months, cumulative failure rates were lower in iBU-SE (0.0%, p = 0.016) and iBU-ER groups (2.1%, p = 0.07) compared to OFL (16.7%). At two years, iBU-SEE also showed fewer failures (0.0% SEE vs. 34.6% OFL, p = 0.016), as did iBU-SE compared to iBU-ER after 36 months (2.2 and 19.6%, p = 0.039). From BL, the iBU-SEE group always had the fewest marginal gaps and the highest percentage of perfect margins. From BL, iBU-SEE (0%, p = 0.008) and iBU-ER (0.2%, p = 0.027) showed significantly fewer marginal gaps compared to OFL (2.5%) and more perfect margins were found with iBU-SEE starting at 6 months (p = 0.054). The SEE and ER modes ensured the most excellent marginal quality, with differences from the control appearing earlier with QMA than clinically. In restoring NCCls, iBU showed superior clinical performance over OFL, especially in modes SE and SEE.

Clinical Outcomes and Quantitative Margin Analysis of a Universal Adhesive Using a Randomized Clinical Trial over Three Years.

The effectiveness of a universal adhesive applied in different application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA). In each of the 22 patients, four non-carious cervical lesions (NCCL) were restored with Filtek™ Supreme XTE (3M). The adhesive Scotchbond™ Universal (SBU, 3M) was applied in self-etch (SE), selective-enamel-etch (SEE) or etch-and-rinse (ER) modes. The etch-and-rinse adhesive OptiBond™ FL (OFL, Kerr) served as a control. The restorations were clinically evaluated (FDI criteria) after 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. The FDI criteria and marginal gap were statistically compared between the groups at each recall as well as for the time periods between recalls. The cumulative failure rate was non-significantly higher in the OFL group when compared to all of the SBU groups. Marginal adaptation in the OFL and SBU-SE/ER groups was significantly decreased (BL-36 m, p: 0.004) in comparison to the SBU-SEE group (BL-36 m, p: 0.063). More marginal gaps were found in the OFL group than in the SBU-SEE (BL to 36 m, p: 0.063-0.003) and SBU-ER (24/36 m, p: 0.066/0.005) groups as well as in the SBU-SE group when compared to the SBU-SEE (12-36 m, pi ≤ 0.016) and SBU-ER (24/36 m, p: 0.055/0.001) groups. SBU-SEE performed most effectively. The clinical evaluation and QMA corresponded, yet QMA detected group differences earliest after 6 months and is thus a valuable extension to clinical evaluations.