Occupational Exposure and Health Impact Assessment of Diisocyanates in Finland.

Diisocyanates are a group of chemicals widely used in different industrial applications. The critical health effects related to diisocyanate exposure are isocyanate sensitisation, occupational asthma and bronchial hyperresponsiveness (BHR). Industrial air measurements and human biomonitoring (HBM) samples were gathered in specific occupational sectors to examine MDI, TDI, HDI and IPDI and the respective metabolites from Finnish screening studies. HBM data can give a more accurate picture of diisocyanate exposure, especially if workers have been exposed dermally or used respiratory protection. The HBM data were used for conducting a health impact assessment (HIA) in specific Finnish occupational sectors. For this purpose, exposure reconstruction was performed on the basis of HBM measurements of TDI and MDI exposures using a PBPK model, and a correlation equation was made for HDI exposure. Subsequently, the exposure estimates were compared to a previously published dose-response curve for excess BHR risk. The results showed that the mean and median diisocyanate exposure levels and HBM concentrations were low for all diisocyanates. In HIA, the excess risk of BHR from MDI exposure over a working life period was highest in the construction and motor and vehicle industries and repair sectors, resulting in estimated excess risks of BHR of 2.0% and 2.6%, and 113 and 244 extra BHR cases in Finland, respectively. Occupational exposure to diisocyanates must be monitored because a clear threshold for DI sensitisation cannot be established.

How to use human biomonitoring in chemical risk assessment: Methodological aspects, recommendations, and lessons learned from HBM4EU.

One of the aims of the European Human Biomonitoring Initiative, HBM4EU, was to provide examples of and good practices for the effective use of human biomonitoring (HBM) data in human health risk assessment (RA). The need for such information is pressing, as previous research has indicated that regulatory risk assessors generally lack knowledge and experience of the use of HBM data in RA. By recognising this gap in expertise, as well as the added value of incorporating HBM data into RA, this paper aims to support the integration of HBM into regulatory RA. Based on the work of the HBM4EU, we provide examples of different approaches to including HBM in RA and in estimations of the environmental burden of disease (EBoD), the benefits and pitfalls involved, information on the important methodological aspects to consider, and recommendations on how to overcome obstacles. The examples are derived from RAs or EBoD estimations made under the HBM4EU for the following HBM4EU priority substances: acrylamide, o-toluidine of the aniline family, aprotic solvents, arsenic, bisphenols, cadmium, diisocyanates, flame retardants, hexavalent chromium [Cr(VI)], lead, mercury, mixture of per-/poly-fluorinated compounds, mixture of pesticides, mixture of phthalates, mycotoxins, polycyclic aromatic hydrocarbons (PAHs), and the UV-filter benzophenone-3. Although the RA and EBoD work presented here is not intended to have direct regulatory implications, the results can be useful for raising awareness of possibly needed policy actions, as newly generated HBM data from HBM4EU on the current exposure of the EU population has been used in many RAs and EBoD estimations.

Health Risk Assessment of Ortho-Toluidine Utilising Human Biomonitoring Data of Workers and the General Population.

The aim of this work was to demonstrate how human biomonitoring (HBM) data can be used to assess cancer risks for workers and the general population. Ortho-toluidine, OT (CAS 95-53-4) is an aniline derivative which is an animal and human carcinogen and may cause methemoglobinemia. OT is used as a curing agent in epoxy resins and as intermediate in producing herbicides, dyes, and rubber chemicals. A risk assessment was performed for OT by using existing HBM studies. The urinary mass-balance methodology and generic exposure reconstruction PBPK modelling were both used for the estimation of the external intake levels corresponding to observed urinary levels. The external exposures were subsequently compared to cancer risk levels obtained from the evaluation by the Scientific Committee on Occupational Exposure Limits (SCOEL). It was estimated that workers exposed to OT have a cancer risk of 60 to 90:106 in the worst-case scenario (0.9 mg/L in urine). The exposure levels and cancer risk of OT in the general population were orders of magnitude lower when compared to workers. The difference between the output of urinary mass-balance method and the general PBPK model was approximately 30%. The external exposure levels calculated based on HBM data were below the binding occupational exposure level (0.5 mg/m3) set under the EU Carcinogens and Mutagens Directive.

Estimation of the Exposure-Response Relation between Benzene and Acute Myeloid Leukemia by Combining Epidemiologic, Human Biomarker, and Animal Data.

BACKGROUND: Chemical risk assessment can benefit from integrating data across multiple evidence bases, especially in exposure-response curve (ERC) modeling when data across the exposure range are sparse. METHODS: We estimated the ERC for benzene and acute myeloid leukemia (AML), by fitting linear and spline-based Bayesian meta-regression models that included summary risk estimates from non-AML and nonhuman studies as prior information. Our complete dataset included six human AML studies, three human leukemia studies, 10 human biomarker studies, and four experimental animal studies. RESULTS: A linear meta-regression model with intercept best predicted AML risks after cross-validation, both for the full dataset and AML studies only. Risk estimates in the low exposure range [<40 parts per million (ppm)-years] from this model were comparable, but more precise when the ERC was derived using all available data than when using AML data only. Allowing for between-study heterogeneity, RRs and 95% prediction intervals (95% PI) at 5 ppm-years were 1.58 (95% PI, 1.01-3.22) and 1.44 (95% PI, 0.85-3.42), respectively. CONCLUSIONS: Integrating the available epidemiologic, biomarker, and animal data resulted in more precise risk estimates for benzene exposure and AML, although the large between-study heterogeneity hampers interpretation of these results. The harmonization steps required to fit the Bayesian meta-regression model involve a range of assumptions that need to be critically evaluated, as they seem crucial for successful implementation. IMPACT: By describing a framework for data integration and explicitly describing the necessary data harmonization steps, we hope to enable risk assessors to better understand the advantages and assumptions underlying a data integration approach.See related commentary by Keil, p. 695.

Automated Network Assembly of Mechanistic Literature for Informed Evidence Identification to Support Cancer Risk Assessment.

BACKGROUND: Mechanistic data is increasingly used in hazard identification of chemicals. However, the volume of data is large, challenging the efficient identification and clustering of relevant data. OBJECTIVES: We investigated whether evidence identification for hazard assessment can become more efficient and informed through an automated approach that combines machine reading of publications with network visualization tools. METHODS: We chose 13 chemicals that were evaluated by the International Agency for Research on Cancer (IARC) Monographs program incorporating the key characteristics of carcinogens (KCCs) approach. Using established literature search terms for KCCs, we retrieved and analyzed literature using Integrated Network and Dynamical Reasoning Assembler (INDRA). INDRA combines large-scale literature processing with pathway databases and extracts relationships between biomolecules, bioprocesses, and chemicals into statements (e.g., "benzene activates DNA damage"). These statements were subsequently assembled into networks and compared with the KCC evaluation by the IARC, to evaluate the informativeness of our approach. RESULTS: We found, in general, larger networks for those chemicals which the IARC has evaluated the evidence to be strong for KCC induction. Larger networks were not directly linked to publication count, given that we retrieved small networks for several chemicals with little support for KCC activation according to the IARC, despite the significant volume of literature for these specific chemicals. In addition, interpreting networks for genotoxicity and DNA repair showed concordance with the IARC KCC evaluation. DISCUSSION: Our method is an automated approach to condense mechanistic literature into searchable and interpretable networks based on an a priori ontology. The approach is no replacement of expert evaluation but, instead, provides an informed structure for experts to quickly identify which statements are made in which papers and how these could connect. We focused on the KCCs because these are supported by well-described search terms. The method needs to be tested in other frameworks as well to demonstrate its generalizability. https://doi.org/10.1289/EHP9112.

HBM4EU Diisocyanates Study-Research Protocol for a Collaborative European Human Biological Monitoring Study on Occupational Exposure.

Diisocyanates have long been a leading cause of occupational asthma in Europe, and recently, they have been subjected to a restriction under the REACH regulations. As part of the European Human Biomonitoring project (HBM4EU), we present a study protocol designed to assess occupational exposure to diisocyanates in five European countries. The objectives of the study are to assess exposure in a number of sectors that have not been widely reported on in the past (for example, the manufacturing of large vehicles, such as in aerospace; the construction sector, where there are potentially several sources of exposure (e.g., sprayed insulation, floor screeds); the use of MDI-based glues, and the manufacture of spray adhesives or coatings) to test the usability of different biomarkers in the assessment of exposure to diisocyanates and to provide background data for regulatory purposes. The study will collect urine samples (analysed for diisocyanate-derived diamines and acetyl-MDI-lysine), blood samples (analysed for diisocyanate-specific IgE and IgG antibodies, inflammatory markers, and diisocyanate-specific Hb adducts for MDI), and buccal cells (micronucleus analysis) and measure fractional exhaled nitric oxide. In addition, occupational hygiene measurements (air monitoring and skin wipe samples) and questionnaire data will be collected. The protocol is harmonised across the participating countries to enable pooling of data, leading to better and more robust insights and recommendations.

A Quantitative Meta-Analysis of the Relation between Occupational Benzene Exposure and Biomarkers of Cytogenetic Damage.

BACKGROUND: The genotoxicity of benzene has been investigated in dozens of biomonitoring studies, mainly by studying (classical) chromosomal aberrations (CAs) or micronuclei (MN) as markers of DNA damage. Both have been shown to be predictive of future cancer risk in cohort studies and could, therefore, potentially be used for risk assessment of genotoxicity-mediated cancers. OBJECTIVES: We sought to estimate an exposure-response curve (ERC) and quantify between-study heterogeneity using all available quantitative evidence on the cytogenetic effects of benzene exposure on CAs and MN respectively. METHODS: We carried out a systematic literature review and summarized all available data of sufficient quality using meta-analyses. We assessed the heterogeneity in slope estimates between studies and conducted additional sensitivity analyses to assess how various study characteristics impacted the estimated ERC. RESULTS: Sixteen CA (1,356 individuals) and 13 MN studies (2,097 individuals) were found to be eligible for inclusion in a meta-analysis. Studies where benzene was the primary genotoxic exposure and that had adequate assessment of both exposure and outcomes were used for the primary analysis. Estimated slope estimates were an increase of 0.27% CA [(95% CI: 0.08%, 0.47%); based on the results from 4 studies] and 0.27% MN [(95% CI: -0.23%, 0.76%); based on the results from 7 studies] per parts-per-million benzene exposure. We observed considerable between-study heterogeneity for both end points (I2>90%). DISCUSSION: Our study provides a systematic, transparent, and quantitative summary of the literature describing the strong association between benzene exposure and accepted markers of genotoxicity in humans. The derived consensus slope can be used as a best estimate of the quantitative relationship between real-life benzene exposure and genetic damage in future risk assessment. We also quantitate the large between-study heterogeneity that exists in this literature, a factor which is crucial for the interpretation of single-study or consensus slopes. https://doi.org/10.1289/EHP6404.

Biomonitoring for Occupational Exposure to Diisocyanates: A Systematic Review.

Diisocyanates are a group of chemicals that are widely used in occupational settings. They are known to induce various health effects, including skin- and respiratory tract sensitization resulting in allergic dermatitis and asthma. Exposure to diisocyanates has been studied in the past decades by using different types of biomonitoring markers and matrices. The aim of this review as part of the HBM4EU project was to assess: (i) which biomarkers and matrices have been used for biomonitoring diisocyanates and what are their strengths and limitations; (ii) what are (current) biomonitoring levels of the major diisocyanates (and metabolites) in workers; and (iii) to characterize potential research gaps. For this purpose we conducted a systematic literature search for the time period 2000-end 2018, thereby focussing on three types of diisocyanates which account for the vast majority of the total isocyanate market volume: hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and 4,4'-methylenediphenyl diisocyanate (MDI). A total of 28 publications were identified which fulfilled the review inclusion criteria. The majority of these studies (93%) investigated the corresponding diamines in either urine or plasma, but adducts have also been investigated by several research groups. Studies on HDI were mostly in the motor vehicle repair industry [with urinary hexamethylene diamine result ranging from 0.03 to 146.5 µmol mol-1 creatinine]. For TDI, there is mostly data on foam production [results for urinary toluene diamine ranging from ~0.01 to 97 µmol mol-1 creatinine] whereas the available MDI data are mainly from the polyurethane industry (results for methylenediphenyl diamine range from 0.01 to 32.7 µmol mol-1 creatinine). About half of the studies published were prior to 2010 hence might not reflect current workplace exposure. There is large variability within and between studies and across sectors which could be potentially explained by several factors including worker or workplace variability, short half-lives of biomarkers, and differences in sampling strategies and analytical techniques. We identified several research gaps which could further be taken into account when studying diisocyanates biomonitoring levels: (i) the development of specific biomarkers is promising (e.g. to study oligomers of HDI which have been largely neglected to date) but needs more research before they can be widely applied, (ii) since analytical methods differ between studies a more uniform approach would make comparisons between studies easier, and (iii) dermal absorption seems a possible exposure route and needs to be further investigated. The use of MDI, TDI, and HDI has been recently proposed to be restricted in the European Union unless specific conditions for workers' training and risk management measures apply. This review has highlighted the need for a harmonized approach to establishing a baseline against which the success of the restriction can be evaluated.

Human biomonitoring in health risk assessment in Europe: Current practices and recommendations for the future.

Human biomonitoring (HBM) is an important tool to survey the internal exposure of humans which represents the real life chemical body burden to chemicals and/or their metabolites. It results from total exposure to chemical substances from different sources and via different routes. These substances may be regulated under different legislative frameworks on chemicals (e.g., environmental, occupational, food safety etc). In occupational health, HBM has long traditions to control the exposures at workplaces. By providing accurate data on internal exposure, HBM data can improve human health risk assessment (RA) for both the general population and workers. Although the past few years have shown good examples on the use of HBM in the RA of chemicals, there is still quite some work to be done to improve its use in a regulatory RA. Under the scope of the European Human Biomonitoring Initiative (project HBM4EU, 2017-2021), the current study reviews the state-of-the-art of HBM use in chemicals RA with a special focus in Europe, and attempts to identify hurdles and challenges faced by regulators. To gather information on the use of HBM, including the availability of guidance on how to use it in RA, the RA schemes applied by different European or international organizations were analysed. Examples of such use were identified for a few selected groups of chemicals of concern for human health. In addition, we present the results of a survey, aimed at collecting information from national regulatory risk assessors on their day-to-day RA practices, the use of HBM data, and the obstacles and challenges related to their use. The results evidenced and explained some of the current obstacles of using HBM data in RA. These included the lack of HBM guidance values or biomonitoring equivalents (BEs), limited toxicokinetic information to support the interpretation of HBM data and, in the occupational health and safety (OSH) field, the lack of legal enforcement. Therefore, to support the integration of HBM in regulatory RA, we recommend, on one hand, the elaboration of a EU level guidance on the use of HBM in RA and, on the other hand, the continuation of research efforts to integrate HBM with new RA approaches using in vitro/in silico data and Adverse Outcome Pathways (AOPs).

Impacts of nutrients and pesticides from small- and large-scale agriculture on the water quality of Lake Ziway, Ethiopia.

The area around Lake Ziway in Ethiopia is going through a major agricultural transformation with both small-scale farmers and large horticultural companies using pesticides and fertilisers at an increased rate. To be able to understand how this influences the water quality of Lake Ziway, water quality data was gathered to study the dynamics of pesticide concentrations and physicochemical parameters for the years from 2009 to 2015. Results indicate that for some physicochemical parameters, including pH, potassium and iron, over 50 % of the values were above the maximum permissible limit of the Ethiopian standard for drinking water. The fungicide spiroxamine poses a high chronic risk when the water is used for drinking water, while the estimated intake of diazinon was approximately 50 % of the acceptable daily intake. Higher-tier risk assessment indicated that the fungicide spiroxamine poses a high acute risk to aquatic organisms, while possible acute risks were indicated for the insecticides deltamethrin and endosulfan. Longer-term monitoring needs to be established to show the water quality changes across time and space, and the current study can be used as a baseline measurement for further research in the area as well as an example for other surface water systems in Ethiopia and Africa.