Ferrocene Bis(Sulfonate) Salt as Redoxmer for Fast and Steady Redox Flow Desalination.

Desalination is considered a promising solution to alleviate water shortages, yet current methods are often restricted, due to challenges like high energy consumption, significant cost, or limited desalination capacity. In this study, we present a novel approach of redox flow desalination (RFD) utilizing the highly aqueous-soluble and reversible redox-active compound, potassium 1,1'-bis(sulfonate) ferrocene (1,1'-FcDS). This water-soluble organic compound yielded stable and rapid desalination, sustaining extended operation without notable decay and achieving an impressive desalination rate of up to 457.5 mmol·h-1·m-2 and energy consumption as low as 40.2 kJ·molNaCl-1. Specifically, the RFD device effectively desalinated a 50 mM NaCl solution to potable standards within 6000 s using 1,1'-FcDS. It maintained an average energy consumption of 178.16 kJ·molNaCl-1 and exhibited negligible deterioration in desalination rate, energy efficiency, and charge efficiency throughout a rigorous 12,000 s cycling test. Furthermore, the versatility of this method was demonstrated by effectively treating saline water with varying initial concentrations from 10 mM to 50 mM, showcasing its potential across a broad spectrum of applications.

Role of MCD and Mössbauer Spectroscopy in the Explanation of the Properties of a Highly Soluble (µ-Oxo)bis[tetra(tert-butyl)(phthalocyaninato)iron(III)] Complex, Its Pyridine Adduct, and Redox Forms Oxidized under Anaerobic Conditions in Non-Coordinating Solvents.

Solid-state Mössbauer spectra of a highly soluble (µ-oxo)bis[tetra(tert-butyl)(phthalocyaninato)iron(III)] complex 1 ((PctBuFe)2O) consist of two doublets that represent bent geometry in µ-oxo(1) (1a, ΔEQ = 0.43 mm/s, T = 10 K) and linear geometry in µ-oxo(2) (1b, ΔEQ = 1.40 mm/s, T = 10 K) isomers with the ratio between two isomers depending on the purification method. Both isomers were found to be diamagnetic and transform entirely to the 1a isomer in solution. The room- and low-temperature magnetic circular dichroism (MCD) spectra of 1a µ-oxo(1) show one Faraday A- and one B-term between 670 and 720 nm, which correlate with the 690 nm band and 709 nm shoulder observed in the UV-vis spectrum of this compound. UV-vis and MCD spectra of 1a are almost independent of the temperature. Both 1a and 1b are diamagnetic between room temperature and 4 K. Electrochemical experiments show up to three oxidations and up to four reduction processes in 1a. Its oxidation under spectroelectrochemical or chemical (in the absence of oxygen-containing oxidants) conditions in non-coordinating solvents results in the formation of broad NIR bands around 1195 nm (first oxidation) and 1264 nm (second oxidation). The MCD spectra of the redox-active species show a Faraday B-term signal with negative amplitude in this region and are very different from those in the monomeric PctBu(1-)FeIIIX2 complexes 5X (X = Cl- or CF3CO2-). The pyridine adduct of 1a ((PyPctBuFe)2O; 2Py) is paramagnetic (µB = 2.19, g = 2.11, and J = -6.1 cm-1) and has a major peak at 627 nm of its UV-vis spectrum, which is associated with a MCD pseudo A-term. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations, along with the exciton coupling theory, were used to explain the unusually red-shifted intense transitions in 1a as well as the H-aggregate-like spectra of the pyridine adduct 2Py.

Meso-Carbon Atom Nucleophilic Attack Susceptibility in the Sterically Strained Antiaromatic Bis-BODIPY Macrocycle and Extended Electron-Deficient BODIPY Precursor.

A sterically strained 32π-electron antiaromatic bis-BODIPY macrocycle in which two BODIPY fragments are linked by p-divinylbenzene groups was prepared and characterized. Unlike regular BODIPYs, the fluorescence in this macrocycle is quenched. The broad signals in the NMR spectra of the macrocycle were explained by the vibronic freedom of the p-divinylbenzene fragments. The possible diradicaloid nature of the macrocycle was excluded on the basis of variable-temperature EPR spectra in solution and in solid state, which is indicative of its closed-shell quinoidal structure. The meso-C-H bond in the macrocycle and its precursor BODIPY dialdehyde 3 forms a weak hydrogen bond with THF and is susceptible for the nucleophilic attack by organic amines and cyanide anion. The reaction products of such a nucleophilic attack have meso-sp3 carbon atoms and were characterized by NMR, mass spectrometry and, in one case, X-ray crystallography. Unlike the initial bis-BODIPY macrocycle, the adducts have strong fluorescence in the 400 nm region. The electronic structure and spectroscopic properties of new chromophores were probed by density functional theory (DFT) and time-dependent DFT (TDDFT) calculations and correlate well with the experimental data.

Charge-Transfer Spectroscopy of Bisaxially Coordinated Iron(II) Phthalocyanines through the Prism of the Lever's EL Parameters Scale, MCD Spectroscopy, and TDDFT Calculations.

The position of the experimentally observed (in the UV-vis and magnetic circular dichroism (MCD) spectra) low-energy metal-to-ligand charge-transfer (MLCT) band in low-spin iron(II) phthalocyanine complexes of general formula PcFeL2, PcFeL'L″, and [PcFeX2]2- (L, L', or L″ are neutral and X- is an anionic axial ligand) was correlated with the Lever's electrochemical EL scale values for the axial ligands. The time-dependent density functional theory (TDDFT)-predicted UV-vis spectra are in very good agreement with the experimental data for all complexes. In the majority of compounds, TDDFT predicts that the first degenerate MLCT band that correlates with the MCD A-term observed between 360 and 480 nm is dominated by an eg (Fe, dπ) → b1u (Pc, π*) single-electron excitation (in traditional D4h point group notation) and agrees well with the previous assignment discussed by Stillman and co-workers[ Inorg. Chem. 1994, 33, 573-583]. The TDDFT calculations also suggest a small energy gap for b1u/b2u (Pc, π*) orbital splitting and closeness of the MLCT1 eg (Fe, dπ) → b1u (Pc, π*) and MLCT2 eg (Fe, dπ) → b2u (Pc, π*) transitions. In the case of the PcFeL2 complexes with phosphines as the axial ligands, additional degenerate charge-transfer transitions were observed between 450 and 500 nm. These transitions are dominated by a2u (Pc + L, π) → eg (Pc, π*) single-electron excitations and are unique for the PcFe(PR3)2 complexes. The energy of the phthalocyanine-based a2u orbital has large axial ligand dependency and is the reason for a large energy deviation for B1 a2u (Pc + L, π) → eg (Pc, π*) transition. The energies of the axial ligand-to-iron, axial ligand-to-phthalocyanine, iron-to-axial ligand, and phthalocyanine-to-axial ligand charge-transfer transitions were discussed on the basis of TDDFT calculations.

Zwitterionic Ferrocenes: An Approach for Redox Flow Battery (RFB) Catholytes.

Herein we present two new ferrocene compounds Fc3 and Fc4 with, respectively, propyl and butyl zwitterionic side chains. These compounds are highly soluble in water (0.66 M for Fc3 and 2.01 M for Fc4). When paired with anthraquinone-2,7-disulfonate as the anolyte, these zwitterionic ferrocenes exhibit excellent performance under neutral aqueous conditions. Voltage and energy efficiencies were ca. 88%, and the Coulombic efficiency was over 99% for both high-concentration redox flow batteries. We observed a difference in stability between the lengths of the zwitterionic chains, with Fc4 showing higher stability than Fc3, and the capacity decreased by ∼5% at the end of 20 cycles (∼1% per day). Density functional theory calculations revealed striking differences in the conformational properties between Fc3 and Fc4, with Fc4 retaining a linear structure of the side chain in solution, while Fc3 favored both linear and curved geometries.

Resolving a Half-Century-Long Controversy between (Magneto)optical and EPR Spectra of Single-Electron-Reduced [PcFe]-, [PcFeL]-, and [PcFeX]2- Complexes: Story of a Double Flip.

The reduction of iron(II) phthalocyanine (Pc(2-)FeII) or its bisaxially coordinated complexes results in the formation of the purple/red [PcFe]-, [PcFeL]-, and [PcFeX]2- (L is neutral and X is anionic ligand) species. The X-ray structure of the [K(DME)4][PcFe] complex exhibits a square-planar [PcFe]- anion. 1H NMR spectra of the reduced species have one or two phthalocyanine broad peaks between 15 and 17 ppm. Solution magnetic moments are consistent with the presence of a single unpaired electron. A solid-state Mössbauer spectrum of [K(DME)4][PcFe] is consistent with an early report [Taube, R. Pure Appl. Chem.1974, 38, 427-438]. The solid-state EPR spectrum of the [PcFe]- anion is close to that recorded by Konarev et al. [ Dalton Trans.2012, 41, 13841-13847]. Solution EPR spectra of reduced species have axial symmetry (g⊥ ∼ 2.08-2.17 and g|| ∼ 1.95-1.96) and correlate well with spectra reported by Lever and Wilshire in 1978 [ Inorg. Chem.1978, 17, 1145-1151]. The UV-vis spectra of pentacoordinated [PcFeL]- and [PcFeX]2- anions consist of the characteristic bands around 810, 690, and 515 nm. These bands correlate well with the set of MCD pseudo A-terms and resemble transitions in the [Pc(3-)M]- and [Pc(3-)ML]- compounds. The UV-vis and MCD spectra of [PcFeL]- and [PcFeX]2- complexes are in stark contrast to the crystallographically characterized reference [Pc(2-)CoI]- anion, which is EPR silent, has a regular diamagnetic 1H NMR spectrum, and has an intense Q-band at 699 nm, which correlates well with the strong MCD A-term. The DFT and TDDFT calculations are suggestive of the iron(II) center in a (dxy)2(dxz,yz)3(dz2)1 (s = 1) electronic configuration that is antiferromagnetically coupled with the one-electron-reduced Pc(3-) ligand (i.e., [Pc(3-)FeII]-, [Pc(3-)FeIIL]-, and [Pc(3-)FeIIX]2-). The calculated EPR, Mössbauer, and UV-vis spectra of [PcFe]-, [PcFeL]-, and [PcFeX]2- complexes are in excellent agreement with the experimental data, thus resolving the controversy between axial s = 1/2 like EPR and Pc(3-)-like UV-vis spectra of these compounds.

Fluorine Labeling of ortho-Phenylenes to Facilitate Conformational Analysis.

1H NMR spectroscopy is a powerful tool for the conformational analysis of ortho-phenylene foldamers in solution. However, as o-phenylenes are integrated into ever more complex systems, we are reaching the limits of what can be analyzed by 1H- and 13C-based NMR techniques. Here, we explore fluorine labeling of o-phenylene oligomers for analysis by 19F NMR spectroscopy. Two series of fluorinated oligomers have been synthesized. Optimization of monomers for Suzuki coupling enables an efficient stepwise oligomer synthesis. The oligomers all adopt well-folded geometries in solution, as determined by 1H NMR spectroscopy and X-ray crystallography. 19F NMR experiments complement these methods well. The resolved singlets of one-dimensional 19F{1H} spectra are very useful for determining relative conformer populations. The additional information from two-dimensional 19F NMR spectra is also clearly valuable when making 1H assignments. The comparison of 19F isotropic shielding predictions to experimental chemical shifts is not, however, currently sufficient by itself to establish o-phenylene geometries.

An Organometallic Isostere of an Amino Acid.

An organometallic complex that mimics an amino acid, also known as an amino acid isostere, can be synthesized from a functionalized bipyridine ligand and a fac-[Re(CO)3]+ center. The reaction of an achiral ligand and metal results in a racemic mixture of chiral-at-metal complexes. These metal species have amine and carboxy termini, a side chain type unit that can be varied, as well as the chiral metal that is analogous to the α carbon of an amino acid. The racemic mixtures can be separated into enantiomers by chiral chromatography, and the metal complexes can be incorporated into peptides by using solid-phase peptide synthesis.

Slow 3MLCT Formation Prior to Isomerization in Ruthenium Carbene Sulfoxide Complexes.

A series of photochromic complexes with general formulas of [Ru(bpy)2(NHC-SR)]2+ and [Ru(bpy)2(NHC-S(O)R)]2+ were prepared and investigated by X-ray crystallography, electrochemistry, and ultrafast transient absorption spectroscopy {where bpy is 2,2'-bipyridine and NHC-SR and NHC-S(O)R are chelating thioether (-SR) and chelating sulfoxide [-S(O)R] N-heterocyclic carbene (NHC) ligands}. The only differences between these complexes are the nature of the R group on the sulfur (Me vs Ph), the identity of the carbene (imidazole vs benzimidazole), and the number of linker atoms in the chelate (CH2 vs C2H4). A total of 13 structures are presented {four [Ru(bpy)2(NHC-SR)]2+ complexes, four [Ru(bpy)2(NHC-S(O)R)]2+ complexes, and five uncomplexed ligands}, and these reveal the expected coordination geometry as predicted from other spectroscopy data. The data do not provide insight into the photochemical reactivity of these compounds. These carbene ligands do impart stability with respect to ground state and excited state ligand substitution reactions. Bulk photolysis reveals that these complexes undergo efficient S → O isomerization, with quantum yields ranging from 0.24 to 0.87. The excited state reaction occurs with a time constant ranging from 570 ps to 1.9 ns. Electrochemical studies reveal an electron transfer-triggered isomerization, and voltammograms are consistent with an ECEC (electrochemical-chemical electrochemical-chemical) reaction mechanism. The carbene facilitates an unusually slow S → O isomerization and an unusally fast O → S isomerization. Temperature studies reveal a small and negative entropy of activation for the O → S isomerization, suggesting an associative transition state in which the sulfoxide simply slides along the S-O bond during isomerization. Ultrafast studies provide evidence of an active role of the carbene in the excited state dynamics of these complexes.

Highly Soluble Imidazolium Ferrocene Bis(sulfonate) Salts for Redox Flow Battery Applications.

Redox flow batteries (RFBs) are scalable devices that employ solution-based redox active components for scalable energy storage. To maximize energy density, new highly soluble catholytes and anolytes need to be synthesized and evaluated for their electrochemical performance. To that end, we synthesized a series of imidazolium ferrocene bis(sulfonate) salts as highly soluble catholytes for RFB applications. Six salts with differing alkyl chain lengths on the imidazolium cation were synthesized, characterized, and electrochemically analyzed. While aqueous solubility was significantly improved, the reactivity of the imidazolium cation and the increased viscosities of the salt solutions in water (which increase with increasing imidazolium chain length) limit the applicability of these materials to RFB design.

Photophysical properties of a boron analogue of coumarin.

In this report, we present a study into the structure and electronic properties of difluoroboronsalicylaldoxime (DFBS), a boron-based structural analog of coumarin. The modification of the heterocyclic ring of coumarin with boron results in a compound with similar structural parameters and molecular orbitals to coumarin. DFT and TDDFT calculations reveal a significant stabilization of the LUMO in DFBS; this is supported by a ∼40 nm red shift of the lowest electronic transition in the absorption spectrum. Interestingly, DFBS is emissive, while unmodified coumarin is effectively non-radiative. Comparisons between DFBS, emissive coumarin variants, and unmodified coumarin suggest that the charge transfer character of the transition contributes to the fluorescence.

Binding a Meridional Ligand in a Facial Geometry: A Square Peg in a Round Hole.

The bis(pyridylimino)isoindoline (BPI) ligand is a tridentate chelate that binds to metals via a meridional coordination mode. However, when this ligand forms a complex with Re(CO)3, an almost exclusively facial moiety, the BPI ligand deforms to coordinate in a facial mode. We have in-vestigated this deformation via structural and theoretical means, and the non-planar binding mode of the ligand bathochromically shifts the metal to ligand charge transfer (MLCT) transition.

A Polymer with "Locked" Degradability: Superior Backbone Stability and Accessible Degradability Enabled by Mechanophore Installation.

Though numerous applications require degradable polymers, there are surprisingly few polymer systems that combine superior stability and controllable degradability. Particularly, the degradability of a conventional degradable polymer is typically enabled by cleavable groups on the backbone, which can be attacked by stimuli in ambient conditions, causing undesirable material deterioration. Here we report a general strategy to overcome this issue: "locking" the degradability during handling and use of the polymers and "unlocking" it when degradation is needed. This strategy is demonstrated with a cyclobutane-fused lactone (CBL) polymer. The cyclobutane keeps polymer backbone intact under conditions that hydrolyze the lactone and allows the ester group to be recovered when undesirable hydrolysis occurs. When backbone degradation is needed, the degradability can be unlocked by mechanochemical activation that converts the polyCBL into a linear polyester. The rare combination of two intrinsically conflicting properties, i.e., backbone stability and accessible degradability, can make this polymer a potential option for new sustainable materials.

(8-Amino)quinoline and (4-Amino)phenanthridine Complexes of Re(CO)3 Halides.

In this report, we present a study on the synthesis, structure, and electronics of a series of (8-amino)quinoline and (4-amino)phenanthridine complexes of Re(CO)3X, where X = Cl and Br. In all cases, the (amino)heterocycles bind as bidentate ligands, with surprisingly symmetric modes of binding based on Re-N bond lengths. Between the complexes of (8-amino)quinolines and (4-amino)phenanthridines studied in this report, we do not observe much structural variation, and remarkably similar UV-visible absorption spectra. Expansion of the π-system in the (4-amino)phenanthridine complexes does result in an increase in the intensity of the lowest energy transitions (λmax), which computational modeling suggests are more purely MLCT in character compared with the mixed π-π*/MLCT character of these transitions in the smaller (8-amino)quinoline-supported complexes. DFT and TDDFT modeling further showed that consideration of spin-orbit coupling (SOC) is essential; omitting SOC misses the π-π* contributions to λmax and is unable to accurately model the observed electronic absorption spectra.

1,3-Diylideneisoindolines: Synthesis, Structure, Redox, and Optical Properties.

Diiminoisoindoline (DII) is a crucial reagent for the synthesis of phthalocyanine as well as related macrocycles and chelates such as hemiporphyrazine and bis(iminopyridyl)isoindoline. In this report, we present the synthesis and characterization of four 1,3-diylideneisoindolines prepared via the reaction of several organic CH acids and DII. These orange or red compounds exhibit intense π → π* transitions in the UV-visible region. The redox properties and electronic structures of all new compounds were investigated using cyclic voltammetry and density functional theory (DFT). The observed electrochemistry and UV-visible transitions are in good agreement with the DFT and time-dependent DFT calculations, which indicate that the HOMO is largely centered at the O═C-C-C═O fragments, and the lowest unoccupied molecular orbital is more extended onto the isoindoline unit.

Synthesis, Characterization, and Copper(II) Chelates of 1,11-Dithia-4,8-diazacyclotetradecane.

Synthesis of 1,11-dithia-4,8-diazacyclotetradecane (L1), a constitutional isomer of the macrocyclic [14]aneN2S2 series, is accompanied with reaction and method optimization. Chelation of L1 with copper(II) provided assessment of lattice packing, ring contortion, and evidence of conformational fluxionality in solution through two unique crystal structures: L1Cu(ClO4)2 and [(L1Cu)2µ-Cl](ClO4)3. Multiple synthetic approaches are presented, supplemented with reaction methodology and reagent screening to access [14]aneN2S2 L1. Reductive alkylation of bis-tosyl-cystamine was integrated into the synthetic route, eliminating the use and isolation of volatile thiols and streamlining the synthetic scale-up. Late-stage cleavage of protecting sulfonamides was addressed using reductive N-S cleavage to furnish macrocyclic freebase L1.

Lone-Pair-Induced Topicity Observed in Macrobicyclic Tetra-thia Lactams and Cryptands: Synthesis, Spectral Identification, and Computational Assessment.

The synthesis of a rigid macrobicyclic N,S lactam L1 and a topologically favored in/in N,S cryptand L2 are reported with X-ray structure analysis, dynamic correlation NMR spectroscopy, and computational analysis. Lactam L1 exhibits two distinct rotameric conformations (plus their enantiomeric counterparts) at 25 °C, as confirmed via NMR spectroscopy and computational analysis. Coalescence of the resonances of L1 was observed at 115 °C, allowing for complete nuclei to frequency correlation. Combining computational investigations with experimental data, topological equilibria and relative energies/strain relating to the perturbation of the pore were determined. Due to the increased conformational strain of the N2S2 template, the nitrogen lone pairs in L2 elicit a unique transannular interaction, resulting in a thermodynamically favored in/in nephroidal racemate. The combination of preferred topology, steric relief, and electronic localization of L2 induces a chiral environment imparted through the amine with a computed inversion barrier of 10.3 kcal mol-1.

Visible-Light-Driven Photosystems Using Heteroleptic Cu(I) Photosensitizers and Rh(III) Catalysts To Produce H2.

The synthesis of two new heteroleptic Cu(I) photosensitizers (PS), [Cu(Xantphos)(NN)]PF6 (NN = biq = 2,2'-biquinoline, dmebiq = 2,2'-biquinoline-4,4'-dimethyl ester; Xantphos = 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene), along with the associated structural, photophysical, and electrochemical properties, are described. The biquinoline diimine ligand extends the PS light absorbing properties into the visible with a maximum absorption at 455 and 505 nm for NN = biq and dmebiq, respectively, in CH2Cl2 solvent. Following photoexcitation, both Cu(I) PS are emissive at low energy, albeit displaying stark differences in their excited state lifetimes (τMLCT = 410 ± 5 (biq) and 44 ± 4 ns (dmebiq)). Cyclic voltammetry indicates a Cu-based HOMO and NN-based LUMO for both complexes, whereby the methyl ester substituents stabilize the LUMO within [Cu(Xantphos)(dmebiq)]+ by ∼0.37 V compared to the unsubstituted analogue. When combined with H2O, N,N-dimethylaniline (DMA) electron donor, and cis-[Rh(NN)2Cl2]PF6 (NN = Me2bpy = 4,4'-dimethyl-2,2'-bipyridine, bpy = 2,2'-bipyridine, dmebpy = 2,2'-bipyridine-4,4'-dimethyl ester) water reduction catalysts (WRC), photocatalytic H2 evolution is only observed using the [Cu(Xantphos)(biq)]+ PS. Furthermore, the choice of cis-[Rh(NN)2Cl2]+ WRC strongly affects the catalytic activity with turnover numbers (TONRh = mol H2 per mol Rh catalyst) of 25 ± 3, 22 ± 1, and 43 ± 3 for NN = Me2bpy, bpy, and dmebpy, respectively. This work illustrates how ligand modification to carefully tune the PS light absorbing, excited state, and redox-active properties, along with the WRC redox potentials, can have a profound impact on the photoinduced intermolecular electron transfer between components and the subsequent catalytic activity.

Zwitterionic Design Principle of Nickel(II) Catalysts for Carbonylative Polymerization of Cyclic Ethers.

Zwitterionic structure is necessary for NiII complexes to catalyze carbonylative polymerization (COP) of cyclic ethers. The cationic charge at the NiII center imparts sufficient electrophilicity to the Ni-acyl bond for it to react with cyclic ethers to give an acyl-cyclic ether oxonium intermediate, while the ligand-centered anionic charge ensures that the resultant oxonium cation is ion-paired with the Ni0 nucleophile. The current catalysts give non-alternating copolymers of carbon monoxide and cyclic ethers and are the most effective when both ethylene oxide and tetrahydrofuran are present as the cyclic ether monomers.

BOSHPY Fluorophores: BODIPY Analogues with Single Atom Controlled Aggregation.

The reaction of diiminoisoindoline and iminoxoisoindoline with aminoazoles results in the formation of bidentate chelates that can be considered a semihemiporphyrazine. These chelates react with BF3 to produce fluorescent compounds that are structurally analogous to the BODIPY dyes. These difluoroboron semihemiporphyrazines (BOSHPYs) aggregate, and the type of aggregation (H or J) is determined by a single atom at the periphery of the ligand (O or N). Notably, the imine terminated compounds remain fluorescent upon aggregation.