Nanomaterials based on DNA.

The combination of synthetic stable branched DNA and sticky-ended cohesion has led to the development of structural DNA nanotechnology over the past 30 years. The basis of this enterprise is that it is possible to construct novel DNA-based materials by combining these features in a self-assembly protocol. Thus, simple branched molecules lead directly to the construction of polyhedrons, whose edges consist of double helical DNA and whose vertices correspond to the branch points. Stiffer branched motifs can be used to produce self-assembled two-dimensional and three-dimensional periodic lattices of DNA (crystals). DNA has also been used to make a variety of nanomechanical devices, including molecules that change their shapes and molecules that can walk along a DNA sidewalk. Devices have been incorporated into two-dimensional DNA arrangements; sequence-dependent devices are driven by increases in nucleotide pairing at each step in their machine cycles.

Environmentally Controlled Oscillator with Triplex Guided Displacement of DNA Duplexes.

The use of DNA triplex association is advantageous for the reconfiguration of dynamic DNA nanostructures through pH alteration and can provide environmental control for both structural changes and molecular signaling. The combination of pH-induced triplex-forming oligonucleotide (TFOs) binding with toehold-mediated strand displacement has recently garnered significant attention in the field of structural DNA nanotechnology. While most previous studies use single-stranded DNA to displace or replace TFOs within the triplex, here we demonstrate that pH alteration allows a DNA duplex, with a toehold assistance, to displace TFOs from the components of another DNA duplex. We examined the dependence of this process on toehold length and show that the pH changes allow for cyclic oscillations between two molecular formations. We implemented the duplex/triplex design onto the surface of 2D DNA origami in the form outlining binary digits 0 or 1 and verified the oscillatory conformational changes between the two formations with atomic force microscopy.

Engineering DNA Crystals toward Studying DNA-Guest Molecule Interactions.

Sequence-selective recognition of DNA duplexes is important for a wide range of applications including regulating gene expression, drug development, and genome editing. Many small molecules can bind DNA duplexes with sequence selectivity. It remains as a challenge how to reliably and conveniently obtain the detailed structural information on DNA-molecule interactions because such information is critically needed for understanding the underlying rules of DNA-molecule interactions. If those rules were understood, we could design molecules to recognize DNA duplexes with a sequence preference and intervene in related biological processes, such as disease treatment. Here, we have demonstrated that DNA crystal engineering is a potential solution. A molecule-binding DNA sequence is engineered to self-assemble into highly ordered DNA crystals. An X-ray crystallographic study of molecule-DNA cocrystals reveals the structural details on how the molecule interacts with the DNA duplex. In this approach, the DNA will serve two functions: (1) being part of the molecule to be studied and (2) forming the crystal lattice. It is conceivable that this method will be a general method for studying drug/peptide-DNA interactions. The resulting DNA crystals may also find use as separation matrices, as hosts for catalysts, and as media for material storage.

Mesojunction-Based Design Paradigm of Structural DNA Nanotechnology.

Mesojunctions were introduced as a basic type of crossover configuration in the early development of structural DNA nanotechnology. However, the investigations of self-assembly from multiple mesojunction complexes have been overlooked in comparison to their counterparts based on regular junctions. In this work, we designed standardized component strands for the construction of complex mesojunction lattices. Three typical mesojunction configurations with three and four arms were showcased in the self-assembly of 1-, 2-, and 3-dimensional lattices constructed from both a scaffold-free tiling approach and a scaffolded origami approach.

The Formation and Displacement of Ordered DNA Triplexes in Self-Assembled Three-Dimensional DNA Crystals.

Reconfigurable structures engineered through DNA hybridization and self-assembly offer both structural and dynamic applications in nanotechnology. Here, we have demonstrated that strand displacement of triplex-forming oligonucleotides (TFOs) can be translated to a robust macroscopic DNA crystal by coloring the crystals with covalently attached fluorescent dyes. We show that three different types of triplex strand displacement are feasible within the DNA crystals and the bound TFOs can be removed and/or replaced by (a) changing the pH from 5 to 7, (b) the addition of the Watson-Crick complement to a TFO containing a short toehold, and (c) the addition of a longer TFO that uses the duplex edge as a toehold. We have also proved by X-ray diffraction that the structure of the crystals remains as designed in the presence of the TFOs.

Heterobimetallic Base Pair Programming in Designer 3D DNA Crystals.

Metal-mediated DNA (mmDNA) presents a pathway toward engineering bioinorganic and electronic behavior into DNA devices. Many chemical and biophysical forces drive the programmable chelation of metals between pyrimidine base pairs. Here, we developed a crystallographic method using the three-dimensional (3D) DNA tensegrity triangle motif to capture single- and multi-metal binding modes across granular changes to environmental pH using anomalous scattering. Leveraging this programmable crystal, we determined 28 biomolecular structures to capture mmDNA reactions. We found that silver(I) binds with increasing occupancy in T-T and U-U pairs at elevated pH levels, and we exploited this to capture silver(I) and mercury(II) within the same base pair and to isolate the titration points for homo- and heterometal base pair modes. We additionally determined the structure of a C-C pair with both silver(I) and mercury(II). Finally, we extend our paradigm to capture cadmium(II) in T-T pairs together with mercury(II) at high pH. The precision self-assembly of heterobimetallic DNA chemistry at the sub-nanometer scale will enable atomistic design frameworks for more elaborate mmDNA-based nanodevices and nanotechnologies.

The Rule of Thirds: Controlling Junction Chirality and Polarity in 3D DNA Tiles.

The successful self-assembly of tensegrity triangle DNA crystals heralded the ability to programmably construct macroscopic crystalline nanomaterials from rationally-designed, nanoscale components. This 3D DNA tile owes its "tensegrity" nature to its three rotationally stacked double helices locked together by the tensile winding of a center strand segmented into 7 base pair (bp) inter-junction regions, corresponding to two-thirds of a helical turn of DNA. All reported tensegrity triangles to date have employed ( Z + 2 / 3 ) \[\left( {Z{\bm{ + }}2{\bf /}3} \right)\] turn inter-junction segments, yielding right-handed, antiparallel, "J1" junctions. Here a minimal DNA triangle motif consisting of 3-bp inter-junction segments, or one-third of a helical turn is reported. It is found that the minimal motif exhibits a reversed morphology with a left-handed tertiary structure mediated by a locally-parallel Holliday junction-the "L1" junction. This parallel junction yields a predicted helical groove matching pattern that breaks the pseudosymmetry between tile faces, and the junction morphology further suggests a folding mechanism. A Rule of Thirds by which supramolecular chirality can be programmed through inter-junction DNA segment length is identified. These results underscore the role that global topological forces play in determining local DNA architecture and ultimately point to an under-explored class of self-assembling, chiral nanomaterials for topological processes in biological systems.

Highly Symmetric, Self-Assembling 3D DNA Crystals with Cubic and Trigonal Lattices.

The rational design of nanoscopic DNA tiles has yielded highly ordered crystalline matter in 2D and 3D. The most well-studied 3D tile is the DNA tensegrity triangle, which is known to self-assemble into macroscopic crystals. However, contemporary rational design parameters for 3D DNA crystals nearly universally invoke integer numbers of DNA helical turns and Watson-Crick (WC) base pairs. In this study, 24-bp edges are substituted into a previously 21-bp (two helical turns of DNA) tensegrity triangle motif to explore whether such unconventional motif can self-assemble into 3D crystals. The use of noncanonical base pairs in the sticky ends results in a cubic arrangement of tensegrity triangles with exceedingly high symmetry, assembling a lattice from winding helical axes and diamond-like tessellation patterns. Reverting this motif to sticky ends with Watson-Crick pairs results in a trigonal hexagonal arrangement, replicating this diamond arrangement in a hexagonal context. These results showcase that the authors can generate unexpected, highly complex, pathways for materials design by testing modifications to 3D tiles without prior knowledge of the ensuing symmetry. This study expands the rational design toolbox for DNA nanotechnology; and it further illustrates the existence of yet-unexplored arrangements of crystalline soft matter.

Programmable 3D Hexagonal Geometry of DNA Tensegrity Triangles.

Non-canonical interactions in DNA remain under-explored in DNA nanotechnology. Recently, many structures with non-canonical motifs have been discovered, notably a hexagonal arrangement of typically rhombohedral DNA tensegrity triangles that forms through non-canonical sticky end interactions. Here, we find a series of mechanisms to program a hexagonal arrangement using: the sticky end sequence; triangle edge torsional stress; and crystallization condition. We showcase cross-talking between Watson-Crick and non-canonical sticky ends in which the ratio between the two dictates segregation by crystal forms or combination into composite crystals. Finally, we develop a method for reconfiguring the long-range geometry of formed crystals from rhombohedral to hexagonal and vice versa. These data demonstrate fine control over non-canonical motifs and their topological self-assembly. This will vastly increase the programmability, functionality, and versatility of rationally designed DNA constructs.

Programming DNA Self-Assembly by Geometry†.

This manuscript introduces geometry as a means to program the tile-based DNA self-assembly in two and three dimensions. This strategy complements the sequence-focused programmable assembly. DNA crystal assembly critically relies on intermotif, sticky-end cohesion, which requires complementarity not only in sequence but also in geometry. For DNA motifs to assemble into crystals, they must be associated with each other in the proper geometry and orientation to ensure that geometric hindrance does not prevent sticky ends from associating. For DNA motifs with exactly the same pair of sticky-end sequences, by adjusting the length (thus, helical twisting phase) of the motif branches, it is possible to program the assembly of these distinct motifs to either mix with one another, to self-sort and consequently separate from one another, or to be alternatingly arranged. We demonstrate the ability to program homogeneous crystals, DNA "alloy" crystals, and definable grain boundaries through self-assembly. We believe that the integration of this strategy and conventional sequence-focused assembly strategy could further expand the programming versatility of DNA self-assembly.

Regulation of 2D DNA Nanostructures by the Coupling of Intrinsic Tile Curvature and Arm Twist.

The overwinding and underwinding of DNA duplexes between junctions have been used in designing left- and right-handed DNA origami nanostructures, respectively. For DNA tubes obtained from self-assembled tiles, only a theoretical approach of the intrinsic curvature of the tiles has been previously used to explain their formation. Details regarding the quantitative and structural descriptions of the tile's intrinsic curvature in DNA nanostructures have so far never been addressed. In this work, we designed three types of tile cores built around a circular scaffold using three- and four-branched junctions. Joining the tile cores with arms having two kinds of inter-tile distances, an odd and an even number of DNA half-turns, tended to form planar 2D lattices and tubes, respectively. Streptavidin bound to biotin was used as a labeling technique to characterize the inside and outside surfaces of the tubes and thereby the tile conformation of dihedrals with addressable faces. DNA tubes with either right- or left-handed chirality were obtained by the coupling of the intrinsic curvature of the tiles with the arm twist. We were able to assign the chiral indices (n,m) to a tube with its structure resolved by AFM at the single-tile level and therefore to estimate the global curvature of the tube (or its component tile) using a regular polygon model that approximated its transverse section. A deeper understanding of the integrated actions of different types of twisting forces on DNA tubes will be extremely helpful in engineering more elaborate DNA nanostructures in the future.

Litters of self-replicating origami cross-tiles.

Self-replication and exponential growth are ubiquitous in nature but until recently there were few examples of artificial self-replication. Often replication is a templated process where a parent produces a single offspring, doubling the population in each generation. Many species however produce more than one offspring at a time, enabling faster population growth and higher probability of species perpetuation. We have made a system of cross-shaped origami tiles that yields a number of offspring, four to eight or more, depending on the concentration of monomer units to be assembled. The parent dimer template serves as a seed to crystallize a one-dimensional crystal, a ladder. The ladder rungs are then UV-cross-linked and the offspring are then released by heating, to yield a litter of autonomous daughters. In the complement study, we also optimize the growth conditions to speed up the process and yield a 103 increase in the growth rate for the single-offspring replication system. Self-replication and exponential growth of autonomous motifs is useful for fundamental studies of selection and evolution as well as for materials design, fabrication, and directed evolution. Methods that increase the growth rate, the primary evolutionary drive, not only speed up experiments but provide additional mechanisms for evolving materials toward desired functionalities.

Orienting an Organic Semiconductor into DNA 3D Arrays by Covalent Bonds.

A quasi-one-dimensional organic semiconductor, hepta(p-phenylene vinylene) (HPV), was incorporated into a DNA tensegrity triangle motif using a covalent strategy. 3D arrays were self-assembled from an HPV-DNA pseudo-rhombohedron edge by rational design and characterized by X-ray diffraction. Templated by the DNA motif, HPV molecules exist as single-molecule fluorescence emitters at the concentration of 8 mM within the crystal lattice. The anisotropic fluorescence emission from HPV-DNA crystals indicates HPV molecules are well aligned in the macroscopic 3D DNA lattices. Sophisticated nanodevices and functional materials constructed from DNA can be developed from this strategy by addressing functional components with molecular accuracy.

5'-Phosphorylation Strengthens Sticky-End Cohesions.

Sticky-end cohesion plays a critical role in molecular biology and nucleic acid nanotechnology. Although free energy calculations and molecular mechanics can predict these interactions, chemical modification would compromise such predictions. Herein, we have used rationally designed 3D DNA crystals as a tool to experimentally investigate the modulation of 5'-phosphorylation on sticky-end cohesions. We have found that 5'-phosphorylation strengthens the sticky-end cohesion: in a DNA crystal self-assembled exclusively via sticky-end cohesions, 5'-phosphorylation not only promotes the crystallization process, in general, but also accelerates the crystal growth along designed directions. Such a finding allows the fine-tuning of DNA crystallization kinetics and the control of DNA crystal morphology. It also suggests a potential difference in self-assembly kinetics between natural DNA (with 5'-phosphorylation) and synthetic DNA (without 5'-phosphorylation).

Paranemic Crossover DNA: There and Back Again.

Over the past 35 years, DNA has been used to produce various nanometer-scale constructs, nanomechanical devices, and walkers. Construction of complex DNA nanostructures relies on the creation of rigid DNA motifs. Paranemic crossover (PX) DNA is one such motif that has played many roles in DNA nanotechnology. Specifically, PX cohesion has been used to connect topologically closed molecules, to assemble a three-dimensional object, and to create two-dimensional DNA crystals. Additionally, a sequence-dependent nanodevice based on conformational change between PX and its topoisomer, JX2, has been used in robust nanoscale assembly lines, as a key component in a DNA transducer, and to dictate polymer assembly. Furthermore, the PX motif has recently found a new role directly in basic biology, by possibly serving as the molecular structure for double-stranded DNA homology recognition, a prominent feature of molecular biology and essential for many crucial biological processes. This review discusses the many attributes and usages of PX-DNA-its design, characteristics, applications, and potential biological relevance-and aims to accelerate the understanding of PX-DNA motif in its many roles and manifestations.

Multivalent, multiflavored droplets by design.

Nature self-assembles functional materials by programming flexible linear arrangements of molecules and then folding them to make 2D and 3D objects. To understand and emulate this process, we have made emulsion droplets with specific recognition and controlled valence. Uniquely monovalent droplets form dimers: divalent lead to polymer-like chains, trivalent allow for branching, and programmed mixtures of different valences enable a variety of designed architectures and the ability to subsequently close and open structures. Our functional building blocks are a hybrid of micrometer-scale emulsion droplets and nanoscale DNA origami technologies. Functional DNA origami rafts are first added to droplets and then herded into a patch using specifically designated "shepherding" rafts. Additional patches with the same or different specificities can be formed on the same droplet, programming multiflavored, multivalence droplets. The mobile patch can bind to a patch on another droplet containing complementary functional rafts, leading to primary structure formation. Further binding of nonneighbor droplets can produce secondary structures, a third step in hierarchical self-assembly. The use of mobile patches rather than uniform DNA coverage has the advantage of valence control at the expense of slow kinetics. Droplets with controlled flavors and valences enable a host of different material and device architectures.

Reconfigurable Two-Dimensional DNA Lattices: Static and Dynamic Angle Control.

Branched DNA motifs serve as the basic construction elements for all synthetic DNA nanostructures. However, precise control of branching orientation remains a key challenge to further heighten the overall structural order. In this study, we use two strategies to control the branching orientation. The first one is based on immobile Holliday junctions which employ specific nucleotide sequences at the branch points which dictate their orientation. The second strategy is to use angle-enforcing struts to fix the branching orientation with flexible spacers at the branch points. We have also demonstrated that the branching orientation control can be achieved dynamically, either by canonical Watson-Crick base pairing or non-canonical nucleobase interactions (e.g., i-motif and G-quadruplex). With precise angle control and feedback from the chemical environment, these results will enable novel DNA nanomechanical sensing devices, and precisely-ordered three-dimensional architectures.

Mix and match-a versatile equilibrium approach for hybrid colloidal synthesis.

Colloidal synthesis is a powerful bottom-up approach for programmed self-assembly which holds promise for both research and industry. While diverse, each synthetic process is typically restricted to a specific chemistry. Many applications however require composite materials, whereas a chemical equilibrium can typically only match one material but not the other. Here, a scalable general approach is presented, alleviating the dependency on a specific chemical reaction, by resorting to a mechanical equilibrium; an isopycnic density-gradient-step is tailored to form clusters with prescribed composition. Valence control is demonstrated, making dimers, trimers, and tetramers with purity as high as 96%. The measured kinetics shows a scaleable throughput. The density gradient step plays a dual role of both filtering out undesired products and concentrating the target structures. The "Mix-and-Match" approach is general, and applies to a broad range of colloidal matter: diverse material compositions (plastics, glasses, and emulsions); a range of colloidal interactions (van der Waals, Coulomb, and DNA hybridization); and a spectrum of sizes (nanoscale to multiple micrometers). Finally, the strength of the method is displayed by producing a monodisperse suspension from a highly polydisperse emulsion. The ability to combine colloids into architectures of hybrid materials has applications in pharmaceuticals, cosmetics, and photonics.

The PX Motif of DNA Binds Specifically to Escherichia coli DNA Polymerase I.

The PX motif of DNA is a four-stranded structure in which two parallel juxtaposed double-helical domains are fused by crossovers at every point where the strands approach each other. Consequently, its twist and writhe are approximately half of those of conventional DNA. This property has been shown to relax supercoiled plasmid DNA under circumstances in which head-to-head homology exists within the plasmid; the homology can be either complete homology or every-other-half-turn homology, known as PX homology. It is clearly of interest to establish whether the cell contains proteins that interact with this unusual and possibly functional motif. We have examined Escherichia coli extracts to seek such a protein. We find by gel mobility studies that the PX motif is apparently bound by a cellular component. Fractionation of this binding activity reveals that the component is DNA polymerase I (Pol I). Although the PX motif binds to Pol I, we find that PX-DNA is not able to serve as a substrate for the extension of a shortened strand. We cannot say at this time whether the binding is a coincidence or whether it represents an activity of Pol I that is currently unknown. We have modeled the interaction of Pol I and PX-DNA using symmetry considerations and molecular dynamics.

Making Engineered 3D DNA Crystals Robust.

Engineered 3D DNA crystals are promising scaffolds for bottom-up construction of three-dimensional, macroscopic devices from the molecular level. Nevertheless, this has been hindered by the highly constrained conditions for DNA crystals to be stable. Here we report a method to prepare robust 3D DNA crystals by postassembly ligation to remove this constraint. Specifically, sticky ends at crystal contacts were enzymatically ligated, and the covalent bonds significantly enhanced crystal stability, e.g., being stable at 65 °C. This method also enabled the fabrication of DNA crystals with complex architectures including crystal shell, core-shell, and matryoshka dolls. Furthermore, we have demonstrated the applications of the robust DNA crystals in biocatalysis and protein entrapment. Our study removes one key obstacle for the applications of DNA crystals and offers many new opportunities in DNA nanotechnology.